1. Fredrick Sipp
8942 Scenic Ridge Cove 9016067739
Lake Cormorant, MS 38641 fredrick.sipp@yahoo.com
PERSONAL PROFILE
• Drive safety culture to achieve an environment free of accidents and injuries.
• Supervising the scheduled workforce in completing the daily operations activities
• Assigning and directing personnelto coordinate and execute the daily operational plan.
• Develops costing and staffing models to promote the effective use of employees and equipment; provides advice and
guidance on how to best schedule employees to meet mail volumes and time constraints.
• Congenial and enthusiastic contributorand supporterof team goals.
• Excellent analytical, organizational and presentation skills.
• Directing, training and developing maintenance team members for assigned area/shift
• Using problems solving skills and root cause analysis to resolve and/ormitigate maintenance issues
• Identifying opportunities to eliminate cost and/orwaste through applying LEAN manufacturing principals
• Some planning and scheduling of electrical maintenance and calibration work.
• Identifying, implementing and documenting maintenance and reliability best practices
• Incorporating a culture of inclusion and continuity within all departments
• Develops alternatives to improve operating performance and reduce costs; monitors the implementation of new
procedures and evaluates and reports results.
• Proven ability to prioritize and handle multiple tasks in a challenging environment.
• Provides input for the preparation and justification for new and altered facilities and equipment; recommends
changes to workroom floor layout of equipment and operations.
• High degree of ethics, integrity, and confidentiality in dealing with employees
• Physically set up computers and act as liaison for computer repair
• Plan and supervise the organization of the equipment inventory
• Ensure compliance with all company standards for regulatory code requirements of fire and safety, state and local
agencies so the facility passes all inspections
• Knowledge of performing general maintenance to facility and grounds.
• Comprehensive knowledge of electrical, lighting, painting, carpentry, plumbing and welding
• In-depth knowledge of hydraulic schematics, codes,and repairing instructions
• Identify and resolve operational and service problems.
• Strong knowledge of building ground equipment components,tools, and equipment
• Possess strong mechanical aptitude with excellent communication and problem solving skills
• Knowledge of basis computer applications with strong organizational skills
ACADEMIC BACKGROUND
MBA Project Management, Strayer University, Memphis TN, Graduated October 2012
BS Operation Management, Southeast College of Technology, Memphis TN, Graduated April 2002
AAS Aerospace Ground Equipment Technology,Community College of Air Force, Maxwell-Guter AFB AL Graduated
April 2013
AAS Vehicle Maintenance,Community College of Air Force, Maxwell-Guter AFB AL Graduated October 2012
AAS Logistics, Community College of Air Force, Maxwell-Guter AFB AL Graduated October 2012
AAS Electronics Engineering, ITT Technical Institute, Memphis TN, Graduated November 1999

2. Fredrick Sipp
8942 Scenic Ridge Cove 9016067739
Lake Cormorant, MS 38641 fredrick.sipp@yahoo.com
EMPLOYMENT HISTORY
Fedex Freight Memphis, TN August 2014 – Present
Service Center Maintenance Part-time
 Maintain and repair service center facility (electrical, lighting, painting, carpentry, plumbing, welding)
 Maintain grounds and dock area of service center
 Physically set up computers and act as liaison for computer repair
 Install and repair telephones
 Order service centermaintenance supplies
 Repair operational tools
 Ensure compliance with all company standards for regulatory code requirements of fire and safety, state and local
agencies so the facility passes all inspections
 Complete required paperwork for building maintenance accurately
 Comply with all applicable laws/regulations, as well as company policies/procedures
 Perform other duties as required
Dockworker Part-time July 2014 – August 2014
 Perform freight handling using appropriate motorized and manual equipment, including but not limited to: forklift,
pallet jack and hand truck
 Verify documentation matches freight description (e.g. type, weight, hazardous materials), using current electronic
or manual system
 Secure freight inside trailers using appropriate tools and supplies (e.g. pallets, straps,rope)
 Recoup/repair damaged freight when necessary
 Verify and complete required documentation and reports
 Assist customers with freight and freight documentation as needed
 Comply with all applicable laws/regulations, as well as company policies/procedures
 Perform other duties as required
TN Air National Guard Memphis, TN January 2011 – Present
Power Support System Mechanic
 Responsible for maintaining and performing preventive maintenance of tools and equipment
 Handle responsibilities of inspecting and repairing ground service equipment
 Periodic maintenance (inspection and analysis of equipment with associated adjustments), modification, corrective
maintenance, troubleshooting,repair and replacement of malfunctioning equipment, and certification.
 Maintain entire facilities, including electronic equipment, electrical power distribution, emergency backup power
conditioning systems,and heating, ventilation and air conditioning (HVAC) systems; electronic equipment only; or
power and HVAC systems only.
 Perform the tasks of modifying and troubleshooting necessary equipment to support operation
 Assigned responsibilities of modifying ground equipment, replacing bearings,and servicing compressed air systems
 Responsible for testing and operating ground equipment to ensure smooth performance
 Handle the tasks of servicing equipment by using hydraulic fluid and lubricating oil
 Read and use blueprints, drawings, shop manuals, microfilm machines and computers.
Heavy Vehicle Mechanic October 2005 – January 2011
 Responsible for maintaining and troubleshooting various kinds of heavy equipment like reclaim, rollers and milling
machines, graders, pavers and loaders

3. Fredrick Sipp
8942 Scenic Ridge Cove 9016067739
Lake Cormorant, MS 38641 fredrick.sipp@yahoo.com
 Handle the tasks of repairing and replacing equipment parts such as drums, seals, buckets,gears, rods , hydraulic
pumps and electric motors
 Perform the task of installing and maintaining windshield wipers, radio, heaters and mirrors
 Handle the responsibilities of fabricating and assembling components like power, industrial and machinery
 Perform the tasks of repairing and replacing pistons,bearings, crankshafts,hydraulic drivers and clutches
 Handle the tasks of repairing miscellaneous equipment like forklifts, welding machines and chain saws
Materiel Management July 2000 – October 2005
 Manages materiel management activities and systems involved in requirements determination, inventory control,
and receipt, storage and issues of supplies and equipment.
 Computes requirement, determines allowance, and researches and identifies materiel requirements. Performs
operations involved in storage inspection,identification and receipt of property.
 Performs inventories and ensures timely correction of discrepancies. Inspects and evaluates inventory management
activities.
 Inspects and identifies property. Determines condition of property received. Performs shelf-life inspections ofstock.
 Develops methods and improves procedures for storing property. Plans use of storage facilities. Receipts, stores,
issues,ships and transfers property. Controls issue of classified, sensitive,pilferable and controlled items.
 Coordinates with maintenance activities on repairable component actions.Controls and issues bench stockproperty.
Obtains material required for equipment modification, periodic component exchange and bills of material in support
of maintenance. Accounts forall items contained in mobility readiness spares packages.
 Knowledge of industrial engineering theory, principles, techniques and practices related to layout planning, work
simplification, process analysis,work measurement, quality control, ergonomics and material handling.
 Implement industrial engineering principles as related to work methods improvement, operational performance
improvement, work measurement, and employee scheduling and staffing.
 Lead multi-functional performance improvement teams.
 Develop layouts for operations, processes,systems and equipment.
 Evaluate experimental, prototype,and retrofit equipment.
 Provide oral and written technical guidance, training, and policy interpretation related to industrial engineering,
standardization, and continuous improvement processes.
PROFESSIONAL ASSOCIATIONS
EPA Universal Certification November 2011 - Present
FCC License December 1999 - Present
SECURITY CLEARANCE: SECRET
DATE OF INVESTIGATION: 03 SEP 2014