Edward Njoroge's Resume (CV). - Heavy Vehicle Mechanic(1) (1)
Plant Supervisor Mechanic Resume - Ali H Salem
1. Page1
Ali H.Salem
Plant Supervisor Mechanic • Caterpillar®
ali.h.salem@outlook.com
Summary
• Supervising staff,organizing & monitoring work flow
Under direction, provides technical and functional supervision over assigned mechanical maintenance
personnel,assists in administrative duties of the division,performs major and minor repairs to the company
automobiles,Trucks,Heavy duty machines & other equipment.
Caterpillar®
Experience
Plant Supervisor Mechanic at Standard Metallurgical Company LTD
November 2015 - Present (10 months)
• CAT SIS & ET Scanner
• EPC & Star Diagnosis System Mercedes-Benz
• Supervises and coordinates activities of workers engaged in setting up, installing, repairing, and maintaining
machinery and equipment, and in fabricating metal parts and tools: Directs workers engaged in repairing and
maintaining parts of equipment and machines.
• Coordinates activities of workers engaged in installation of machinery and equipment.
• Directs workers in electrical, electronic, mechanical, hydraulic, and pneumatic maintenance and repair of
machinery and equipment.
• Assists workers in diagnosing malfunctions in machinery and equipment based on observation of machinery
and applying knowledge from past experience.
• Directs workers engaged in dismantling, assembling, and installing industrial machinery.
• To order, receive, store, and issue materials, supplies, tools, and parts; to input and track data; and to
• Maintain computerized inventory control records, Prepare, and review workshop budget, revenue, expense,
payroll entries, invoices, and other accounting documents.
Plant Supervisor Mechanic at Rockbridge Construction Limited
February 2012 - November 2015 (3 years 10 months)
• CAT SIS & ET Scanner
• EPC & Star Diagnosis System Mercedes-Benz
• Supervises and coordinates activities of workers engaged in setting up, installing, repairing, and maintaining
machinery and equipment, and in fabricating metal parts and tools: Directs workers engaged in repairing and
maintaining parts of equipment and machines.
2. Page2
• Coordinates activities of workers engaged in installation of machinery and equipment.
• Directs workers in electrical, electronic, mechanical, hydraulic, and pneumatic maintenance and repair of
machinery and equipment.
• Assists workers in diagnosing malfunctions in machinery and equipment based on observation of machinery
and applying knowledge from past experience.
• Directs workers engaged in dismantling, assembling, and installing industrial machinery.
• To order, receive, store, and issue materials, supplies, tools, and parts; to input and track data; and to
• Maintain computerized inventory control records, Prepare, and review workshop budget, revenue, expense,
payroll entries, invoices, and other accounting documents.
Training - Trucks and Vans at Weststar Associates Limited
November 2014 - November 2014 (1 month)
Attend the Training's:
• T0222F - Trucks, Vans - Electrical System - Level 1 - Go
• T0223F - Trucks, Vans - Electrical System - Level 2 - Run
• T0179F - Trucks, Vans - Star Diagnosis - Level 1 - Go
• T0180F - Trucks, Vans - Star Diagnosis - Level 2 - Go
• T0212F - Trucks, Vans - Mercedes-Benz Product Technology - Maintenance and Service - Go
Heavy-Duty Mechanic (Caterpillar) at The C.A.T. Group
October 2010 - November 2011 (1 year 2 months)
- Caterpillar®
• Dismantle and reassemble heavy equipment using hoists and hand tools.
• Operate and inspect machines or heavy equipment to diagnose defects.
• Overhaul and test machines or equipment to ensure operating efficiency.
• Repair and replace damaged or worn parts.
• Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
• Read and understand operating manuals, blueprints, and technical drawings.
• Examine parts for damage or excessive wear, using micrometers and gauges.
• Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
• Weld or solder broken parts and structural members, using electric or gas welders and soldering tools.
• Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand
tools, jacks, and cranes.
• Test equipment after repair or assembly to ensure proper performance and compliance with manufacturers'
specifications.
• Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as
computerized test equipment and calibration devices.
• Fabricate needed parts or items from sheet metal.
3. Page3
• Assemble gear systems, and align frames and gears.
• Research, order, and maintain parts inventory for services and repairs.
• Adjust and maintain industrial machinery, using control and regulating devices.
• Schedule maintenance for equipment, and keep equipment service records.
• Plan, coordinate and monitor team members in the workshop.
Maintenance Mechanic (Caterpillar) at saeed Jouma
January 2009 - September 2010 (1 year 9 months)
• Do routine maintenance by following a checklist for the inspection process.
• Perform tasks such as replacing oil or lubricating equipment during routine maintenance.
• Replace or repair damaged and malfunctioning parts after doing inspection.
• Make use of computers, dials or gauges to interpret diagnostic test results.
• Use hydraulic machinery to lift large equipment and vehicles (i.e. buses and trucks).
• Inspect the parts and systems that make up the machine or vehicle.
• Perform test drives to be assured that vehicles are working properly or to determine any anomalies.
Skills & Expertise
Microsoft Office
Road Construction
Project Management
Project Planning
Customer Service
Engineering
Management
Contract Management
Heavy Equipment
Negotiation
Inspection
Procurement
Hydraulics
Electricians
Maintenance & Repair
Mechanical Engineering
Factory
Operations Management
Manufacturing
Welding
Maintenance
Budgets
Transportation
Construction
Team Leadership
4. Page4
Team Management
Education
Siblin Training Center
82.6 %, Diesel and Construction Equipment Mechanics, 2008 - 2010
Activities and Societies: Diesel and Construction Equipment Mechanics
Tyre Official School
1st year secondary Secondary Education, BC1, 2006 - 2007
Certifications
Diesel & Construction Equipment Mechanics
United Nations February 2008
Languages
Arabic (Native or bilingual proficiency)
English (Limited working proficiency)
Organizations
NO
5. Page5
Ali H.Salem
Plant Supervisor Mechanic • Caterpillar®
ali.h.salem@outlook.com
2 person has recommended Ali
"Ali is a nice person of the team at the work and he have experience to be on the high level at the work in the
future ."
— Mohammed Kanaan, Plant Supervisor Manager, RockBridge Construction NIG LTD., worked directly
with Ali at Rockbridge Construction Limited
"Ali is very detailed Oriented and produced great result for the company. Best Regards,"
— Milad Anbar, Foreman Mechanic, Rockbridge Construction Limited, reported to Ali at Rockbridge
Construction Limited
Contact Ali on LinkedIn