1. JIMOH ADUMOH EISA
ronald4real2001@yahoo.com
Jimoh.Eisa@gmail.com
+234-08066316729
+234-07035446501
Wutche Street Pipe Line Rumuokrwusi, Port Harcourt
Date of Birth : 1978
State of origin : Edo state, Nigeria
Sex : Male
Actively seeking a position as Measurement/ E&I Engineer within an organization that will allow me to
Use my 7 + Years of experiences in Instrumentation and Commissioning / Maintenance of metering
systems, Configuration of different types of Ultrasonic Flow meters, flow computers, Maintenance of
Process Gas Chromatograph, validation/calibration of fiscal metering Equipments, water cut meter,
moisture Analyzer inspection/maintenance of Orifice meter, maintenance of densitometers,
Commissioning and maintenance of Motor operated valve MOV, Maintenance of Field Instrumentation
flare gas meter and process meters both in software download and upload for parameters installation in
all Section of the Oil and Gas field (Onshore) and (Offshore) industry.
AREAS OF KEY STRENGTH
1. Excellent project management, interpersonal and business communication skills with the
experience required to remain highly focused and self-possessed in fast-paced, demanding
environments. Organized yet tolerant of ambiguity and patient with evolving work processes.
2. Responsive, service oriented, approachable, self managed and results driven. Technical strength
coupled with practical systems and equipment knowledge. Focused team player who builds long
term relationships.
3. Excellent ability to concurrently manage large, complex projects while meeting rigorous
performance standards and demanding schedules, tolerant of varying work load and dynamic
priorities.
PROFESSIONAL EXPERIENCES
Shell Petroleum Development Company Nigeria (SPDC) 2013 November Till Date
POSITION: Sr. Metering Engineer (Contract)
Responsibilities as Senior Metering Engineer:
• Ensure the potential for Metering System Mis-measurement is minimized, introduce
mitigation where necessary.
• Provide expert technical support for installed metering and measurement systems.
• Providing support to ensure the measurement systems, equipment and associated plant
are in a safe and effective condition, accuracy and verification testing on all Asset
Metering Systems.
• Attend Factory Acceptance Test sessions
• Monitoring of Metering System equipment performance, utilizing enhanced monitoring
techniques.
- 1 -
2. JIMOH ADUMOH EISA
ronald4real2001@yahoo.com
Jimoh.Eisa@gmail.com
+234-08066316729
+234-07035446501
Wutche Street Pipe Line Rumuokrwusi, Port Harcourt
• Providing input into the development of all metering procedures, including safety items.
Maintain knowledge of existing metering technologies and awareness of emerging
technologies.
• Represent the company in technical forums.
• Support and protect the company's commercial interests, through measurement
diligence.
• Effective communication of equipment and system issues within the Operational
support teams.
• Advise project groups on the design and implementation of new metering systems
• Provide cover for Metering and Allocation Engineer
GENERAL ELECTRIC COMPANY 2012 April till 2013 October
POSITION: FIELD SERVICE ENGINEER
Responsibility:
• Responsible for meeting daily service repair needs and driving customer satisfaction.
• Installation and commissioning of Flow metering Equipments.
• Documents all inspections, maintenance, service work, and submits paperwork in a timely basis.
• Orders, installs, and returns parts and manages repair parts cycle time.
• Reviews all logs for open issues and prepares formal reports to customers as necessary.
• Ensures that tools and test equipment are properly maintained and calibrated
• Assesses product/equipment performance based on field support data; recommends
modifications or improvements
• Performance Verification/on-site recertification and Application Evaluation
KROHNE OIL AND GAS 2009 September Till 2012 March
POSITION: SENIOR METERING ENGINEER (SUPERVISOR)
- 2 -
3. JIMOH ADUMOH EISA
ronald4real2001@yahoo.com
Jimoh.Eisa@gmail.com
+234-08066316729
+234-07035446501
Wutche Street Pipe Line Rumuokrwusi, Port Harcourt
Metering System Commissioning/Maintenance Support
LOCATION: Shell Development Company Gbaran Ubie, Port Harcourt, Nigeria
Commissioning of the following field instruments / Maintenance SUPPORT
• Orifice plate inspection / validation using straight edge and feeler gauge to check
flatness and three point caliper for measuring orifice plate bore.
• Installation of Pressure transmitter / validation using certified pressure reference
source.
• Installation of Temperature Transmitter / validation using certified thermo bath.
• Installation of High range DP transmitter / validation using certified Dead Weight tester.
• Installation of DP Medium range Transmitter / validation using certified Dead Weight
tester.
• Installation of DP Low range Transmitter / validation using certified Dead Weight tester.
• Installation of Density transducers with integrated temperature element / validation
using certified vacuum gauge incorporated with vacuum pump.
• Wiring for Local and Remote command operation for Motor operated valves
programming of these in the flow computer.
• Installation and configuration of Leak detection system to monitor MOV’s and pipe line
• Wiring of MAXUM II EDITION of process gas chromatograph / installation of sample
conditioning system, Startup and Running analysis.
• Installation of supervisory computer and all the peripheral unit e.g. Report Pinter and
Alarm Printer.
• Installation and configuration of flow computers to carry out all metering tasks.
• Installation and configuration of moisture analyzer module MS Series GE Panametrics.
• Maintenance and commissioning / programming of HVAC unit
Metering System Commissioning & Maintenance Support.
LOCATION: Shell Petroleum Development Corporation Okoloma, Port Harcourt, Nigeria
Commissioning of the following field instruments / Maintenance SUPPORT
• Orifice plate inspection / validation using straight edge and feeler gauge to check
flatness and three point caliper for measuring orifice plate bore.
• Installation of Pressure transmitter / validation using certified pressure reference
source.
• Installation of Temperature Transmitter / validation using certified thermo bath.
• Installation of High range DP transmitter / validation using certified Dead Weight tester.
• Installation of DP Medium range Transmitter / validation using certified Dead Weight
tester.
• Installation of DP Low range Transmitter / validation using certified Dead Weight tester.
- 3 -
4. JIMOH ADUMOH EISA
ronald4real2001@yahoo.com
Jimoh.Eisa@gmail.com
+234-08066316729
+234-07035446501
Wutche Street Pipe Line Rumuokrwusi, Port Harcourt
• Installation of Density transducers with integrated temperature element / validation
using certified vacuum gauge incorporated with vacuum pump.
• Wiring for Local and Remote command operation for Motor operated valves
programming of these in the flow computer.
• Installation and configuration of Moisture Analyzer electronic module.
• Commissioning of Gas Chromatograph.
• Commissioning of Ultrasonic iv flow meter.
• Installation and configuration of moisture analyzer sensor and electronic console.
Maintenance of metering system Support
LOCATION: Shell Petroleum Development Corporation Bonny Island, Rivers State
OPERATION AND MAINTENANCE OF BOGT CRUDE OIL EXPORT AND REFINERY METERING SYSTEM
Provision of technical assistance during supply of crude oil to vessel or refinery thus:
• Ensure availability of all panel components.
• Input of Batch/Sample parameters information in supervisory computers.
• Ensure totalisers are reset, and correct start of batch is implemented.
• Setting of stream 1 on-line and stream 2 on auto.
• Ensure the alarm and report printers are available during loading to report status of metering
system.
• Ensure sample cans are empty and sampling system are fully available before loading.
• Ensure grabber and solenoid valves are on and available.
• Ensure jet mix pump are available and running.
• Ensure communication between skid and unit controlled panel.
• Carry out periodic maintenance on ultrasonic V flow meter.
• During loading Proving of duty meters, accept meter factors, and print prove report.
• Respond to faults and critical alarms during loading and off line.
• End batch and print official batch report with inputs from BOGT lab
Maintenance:
Carry out Services on the following instruments:
• Validation / calibration of Pressure transmitters using certified reference pressure source.
• Validation / calibration of Temperature transmitters using certified reference Thermo bath with
precision thermometer.
• Calibration of Water in Oil monitors probe and its control module.
• Validation of Density transducers
Maintenance of metering system Support
LOCATION: Shell Petroleum Development Corporation Soku gas plant, Port Harcourt, Nigeria
Validation and calibration of the following field instruments:
• Orifice plate inspection / validation using straight edge and feeler gauge to check
flatness and three point caliper for measuring orifice plate bore.
• Pressure transmitter / validation using certified pressure reference source.
- 4 -
5. JIMOH ADUMOH EISA
ronald4real2001@yahoo.com
Jimoh.Eisa@gmail.com
+234-08066316729
+234-07035446501
Wutche Street Pipe Line Rumuokrwusi, Port Harcourt
• Temperature Transmitter / validation using certified thermo bath.
• High range DP transmitter / validation using certified Dead Weight tester.
• DP Medium range Transmitter / validation using certified Dead Weight tester.
• DP Low range Transmitter / validation using certified Dead Weight tester.
• Density transducers with integrated temperature element / validation using certified
vacuum gauge incorporated with vacuum pump.
• Wiring for Local and Remote command operation for Motor operated valves
programming of these in the flow computer.
• Installation and configuration of Leak detection system to monitor MOV’s and pipe line
• MAXUM EDITION II of process gas chromatograph / installation of sample conditioning
system, Startup and Running analysis.
• Installation and configuration of moisture analyzer module.
CHINA PETROLEUM EXPLORATION AND CONTRUCTION COMPANY. LOCATION: Sudan
Commissioning of metering System:
• Installation and startup of supervisory computer fully loaded with metering Application.
• Turbine meter
• Inflation of spheroid ball using inflation tools and installation in the prover loop.
• Services and wiring of solenoid valve for MOV cavity monitoring.
• Maintenance / commissioning of sampling unit.
• Services of transmitters (temperature, pressure)
• Installation of Micro-switches detector using setting jig.
• Online and offline parameter configuration of APB on the flow computers.
• Service/ commissioning of Water in Oil monitors (Delta Controlled).
• Wiring and commissioning of AUMA actuators.
• Installation / commissioning of Turbine flow meter and configuration of parameters in
the flow computer.
EDUCATION
• B. ENG - Electrical/ Electronic Engineering- UNIVERSITY OF PORT HARCOURT
• HND – Electrical/ Electronic Engineering - FED POLY AUCHI EDO State
• ND – Electrical/ Electronic Engineering - FED POLY AUCHI EDO State
• West African School Certificate (WASC) - Anglican Grammar School Igarra
- 5 -
6. JIMOH ADUMOH EISA
ronald4real2001@yahoo.com
Jimoh.Eisa@gmail.com
+234-08066316729
+234-07035446501
Wutche Street Pipe Line Rumuokrwusi, Port Harcourt
SKILL SUMMARY
Global Operations PBP Work Management System ExxonMobil Upstream Nigeria 2013
Certified On Ultrasonic Flow Leve1 Meters GE Oil & Gas HOUSTON TX USA 2012
Liquid and Gas Ultrasonic Field Verification GE Oil & Gas HOUSTON TX USA 2012
Obtained BOSIET 2012
Permit to work training course in Shell. 2011
Obtain HUET training. 2011
CERTIFIED AS GAS METERING EXPERT KROHNE OIL GAS NETHERLANDS B.V 2010
MS word, MS Excel, SAP etc.
- 6 -
7. JIMOH ADUMOH EISA
ronald4real2001@yahoo.com
Jimoh.Eisa@gmail.com
+234-08066316729
+234-07035446501
Wutche Street Pipe Line Rumuokrwusi, Port Harcourt
SKILL SUMMARY
Global Operations PBP Work Management System ExxonMobil Upstream Nigeria 2013
Certified On Ultrasonic Flow Leve1 Meters GE Oil & Gas HOUSTON TX USA 2012
Liquid and Gas Ultrasonic Field Verification GE Oil & Gas HOUSTON TX USA 2012
Obtained BOSIET 2012
Permit to work training course in Shell. 2011
Obtain HUET training. 2011
CERTIFIED AS GAS METERING EXPERT KROHNE OIL GAS NETHERLANDS B.V 2010
MS word, MS Excel, SAP etc.
- 6 -