• Mechanical Engineer with 4 years of experience.
• Well familiar with QMS, APQP, PPAP, FMEA, MSA, 7QC Tools, 5S, KAIZEN, POKA-YOKE, FIFO etc.
• Efficient in using NX 8.0, Creo, CatiaV5R19, and AutoCAD (Part modeling, detailing & drafting).
Learn the concepts of Thermodynamics on Magic Marks
Dinesh CV
1. Deenesh Avinash Savdekar
Address: Plot No. 14, Satpuda Housing Society, Mob No.: 9762557416.
Shitole Nagar, Old Sangvi, Pune- 411027. Email ID: savdekar03@gmail.com.
Objective:
To work in a conducive environment for reputed organization which provides opportunities to learn
and enhance work skills, that will help me grow & excel my career to contribute positively towards
organizational growth.
Summary:
Mechanical Engineer with 4 years of experience.
Well familiar with QMS, APQP, PPAP, FMEA, MSA, 7QC Tools, 5S, KAIZEN, POKA-YOKE,
FIFO etc.
Efficient in using NX 8.0, Creo, CatiaV5R19, and AutoCAD (Part modeling, detailing & drafting).
Work Experience:
Organization : Ambika Press Metal.
Designation : QC Engineer since December 2016 to till date.
To check the quality and assurance of the product as per design and specification of the work.
Assist and/or prepare Project Quality Engineering Plan
Conduct Internal Audits to ensure that all Engineering procedures have been properly
implemented.
Responsible for the technical decision making and engineering decision on quality assurance and
quality control (QA/QC).
Complete documentation as per requirement and maintaining system as per ISO.
Review customers purchase orders, contracts and change requests and ensure that the necessary
criteria and provisions are included in quality and process plans.
Promote and execute quality standards, inspection processes, test methodology, quality plans,
documents and reports.
Conduct and Participate Vendors/Supplier approval/qualification process by conducting Quality
Audits to them.
Review Inspection and Test Plans, quality plan and procedures of subcontractor/supplier/vendor.
Responsible for creation and modification of part drawing and part models of various kinds of
components.
Handled the job of checking and correcting the complete Bill of Materials (BOM) before it is
released to manufacturing.
Responsible for tasks of analyzing the components to ensure design criteria and specific
requirements. Executing the design and development process by understanding FMEA at
component and sub-assembly level.
Involved in providing optimum design at minimum cost in order to be competitive in the market.
To work and coordinate with supplier, production and quality team for changes if any.
Assigned with the responsibilities of creating the Dimensional Drawings, Assembly Drawing, Part
Drawings and the complete Bill of Materials.
Responsible for establishing the specifications for the material procurement and play active role
in helping the purchase dept. in developing these new materials.
2. Organization : HD Fire Protect Pvt. Ltd.
Designation : Inspection Engineer since December 2014 to October 2016.
Receipt Inspection (Casting, Machining components, Flanges, Various fitting components, Pipes,
Springs, Rubber items, Fasteners & Sintered materials).
Ensure all incoming Material meeting standard specification & requirement.
Raw material Identification, Verification with MTC and Approval.
Analysis of rejection at different stages and take preventing action to reduce rejection.
To verify rejection by Root cause analysis and take corrective & preventive action.
Detailed inspection of new product development samples, summarizing reports and giving
clearance for the same.
Conducting inspections at various stages (planned as well as random) at vendors end to ensure
quality specifications are being met with, without any slippages.
Successfully implement 5’S’ at work place management in department.
Responsible for KAIZEN activity in QC Department.
Measurement System Analysis (MSA) for checking instruments & gauges.
New Product Introduction (NPI), Continuous Process Improvement (CPI) with team work along
with suppliers to reduce waste and improve process capabilities and efficiency.
Vendor development for cost reduction and improving quality.
Receipt and crosscheck of GRN against the PO and suggest any correction if required.
Provide technical guidance and QA/QC support for procurement activities, technical bid
evaluation, design reviews during FEED and detailed engineering.
Provide and / or review QA/QC requirements during preparation of Request for Quotation (RFQ)
to Supplier/Vendor and or sub-contractor
Participate to witness in critical design review and testing of equipment/material and conclude
failure root cause analysis of equipment and material
Coordinate with 3rd Party Inspector for inspection of procured items and assigned them as per the
requirement of the project based on criticality of materials/equipment.
Responsible for creating design change notices and task to release or revise drawings.
Responsible for preparation of machining, fabrication, casting, sheet metal components drawings.
Drawing of new developed product.
Design and development of a welding table and hydro unit.
Design and development of an automatic operated nozzle.
Organization : Green Solution Provider Pune.
Designation : Trainee Mechanical Engineer since September 2013 to October 2014.
In process and final inspection of fabricated, machined, assembly components.
Preparation of all necessary documents at each stage as required.
To work and coordinate with supplier, production and quality team for changes if any.
Vendor sourcing, material purchasing, planning and scheduling etc.
Sourcing & Procurement of cost effective quality components to support desired production level.
Procurement procedure and purchase of Direct Material, Indirect Material, Capital material.
Responsible for creating and maintaining part drawings, part lists etc.
3. Education:
Bachelor of Engineering in Mechanical, July 2013.
Passed in first class grade with 63.60% from Govt. College of Engineering, Jalgaon, North
Maharashtra University, Jalgaon, (M.S.)
Higher Secondary Certificate (12th
Science), Feb. 2008.
Passed in first class with distinction grade with 80.67%, Nasik Board, (M.S.)
Secondary School Certificate (10th
), March 2006.
Passed in first class with distinction grade with 83.33%, Nasik Board, (M.S.)
Skills:
Software proficiency : Auto-cad, CatiaV5R19, NX8.0, Creo2.0, Microsoft office.
Languages known : English, Marathi, Hindi.
Ability to work in co-ordination.
Ready to learn new technologies.
Good communication skill.
Personal Details:
Date of birth : 25th
May, 1990.
Gender : Male.
Marital Status : Single.
Passport No. : R3620163.
Declaration:
I hereby declare that the particulars furnished above are true to the best of my knowledge.
Deenesh Savdekar