Instruction on Smart Home Software ――Andriod Client

1. Instruction on Smart Home Software
――Andriod Client
Catalogue
Instruction on Smart Home Software................................................................................................1
Catalogue ..................................................................................................................................1
1. Product introduction..............................................................................................................2
2. Install and uninstall .......................................................................................................................2
2.1 System requirement.............................................................................................................2
2.2 Software acquirement .........................................................................................................2
2.3 Install Software ...................................................................................................................2
2.4 Uninstall Software...............................................................................................................2
3. Product function and usage ...........................................................................................................3
3.1 Login the gateway...............................................................................................................3
1）Launch the software ....................................................................................................3
2）Connect the gateway ...................................................................................................3
3.2 Control function..................................................................................................................4
1）Scene control...............................................................................................................4
2）Security control ...........................................................................................................4
3）Light control................................................................................................................5
4）Socket control .............................................................................................................5
5）Infrared A.C control ....................................................................................................6
6）IR curtain control ........................................................................................................7
7）Environment monitor ..................................................................................................7
8）DVR monitor...............................................................................................................8
3.3 Setup function .....................................................................................................................9
1）Scene setup..................................................................................................................9
2）Sensor setup ..............................................................................................................10
3）Area setup .................................................................................................................10
4）Account setup............................................................................................................11
3.4 More function....................................................................................................................11
1）Weather forecast........................................................................................................11
2）Message recording ....................................................................................................12
3）Data synchronization.................................................................................................12
4）Information sharing...................................................................................................12

2. 2
1. Product introduction
2. Install and uninstall
2.1 System requirement
System version：Android1.5+
Memory：SD card
Network: WIFI or 3G
2.2 Software acquirement
Company website：http://www.wulian.cc/jiameng/software.htm
Google Market：Search “wulian.cc”. “Smart home”
Android Market: Search “wulian.cc”,“Smart home”
Go market: Search “wulian.cc”,“Smart home”
Eoe market: Search “wulian.cc”,“Smart home”
Gfan market: Search “wulian.cc”,“Smart home”
2.3 Install Software
Install software as common android app.
2.4 Uninstall Software
Uninstall software as common android app.

3. 3
3. Product function and usage
3.1 Login the gateway
1）Launch the software
Launch the [smart home] software in apps and enter into welcome interface as following:
2）Connect the gateway
Enter into the main interface, click [Login] to open the dialogue box as following:
Initial [Account] information can be acquired from the label behind the gateway;
Initial [Password] is the last 6 characters of the [Account];
Please refer to the [Account setup] in [Setup] for the function of the password modification;
Operation steps: Input the right account information and password, then click [OK] to connect
with the gateway devices.

4. 4
3.2 Control function
1）Scene control
Four types of the scene mode are provided: Outdoor, Home, Sleep, Customize.
Can customize to set detail affairs for each scene under the current scene, please refer to the
[Scene control] in [Set];
Operation steps: Click scene icon to realize scene switch, so all the affairs in the current scene
[Scene setup] can be controlled.
2）Security control
Alarm status (alarm and normal) and defending status (defending and defend withdrawal) of all
the security sensor devices can be viewed or controlled from the current interface.
Alarm status: Big blue icon means normal status, big red icon means alarming.
Defending status: Lock type of the small icon means defending, unlock status of the small icon
means defend withdrawal.
Operation steps: Click the icon to realize the switchover between defending and defend
withdrawing.

5. 5
3）Light control
All the dimmers and switches in each area can be viewed and controlled from the current
interface.
Devices in different areas can be switched at switchover area, please refer to the [Sensor setup] in
[Set] for device area setup, please refer to the [Area setup] in [Set] for area customization;
Operation steps: Click the icon to realize device control.
4）Socket control
All the sockets in each area can be viewed and controlled from the current interface.
Devices in different areas can be switched at switchover area, please refer to the [Sensor setup] in
[Set] for device area setup, please refer to the [Area setup] in [Set] for area customization;
Operation steps: Click the icon to realize device control.

6. 6
5）Infrared A.C control
Temperature and humidity sensor and IR A.C controller in each area can be viewed and controlled
from the current interface.
Devices in different areas can be switched at switchover area, please refer to the [Sensor setup] in
[Set] for device area setup, please refer to the [Area setup] in [Set] for area customization;
Operation steps: Click the icon to realize device control.
Device needs to be learnt first, learning steps are as below:
1. Switch to [Learning] mode first when starts learning, click the button which needs
learning(button status is gray at this moment which means waiting for learning signals’ return,
please learn it again if the time is out);
2. Pick up the IR remote controller (customer prepared for themselves) at once after the button is
pressed, then aim at IR receiving mouth of the device to press down corresponding functional
key;
3. After device receives learning signals, operated button status before will return to normal.
4. Switch to [Control] mode after learning is completed, then corresponding functional keys on
IR controller can be realized by buttons on the interface.

7. 7
6）IR curtain control
IR curtain controller in each area can be viewed or controlled from the current interface.
Operation steps: Please refer to the [IR A.C control].
7）Environment monitor
Status and data of all the monitoring sensor devices can be viewed from the current interface.
Operation steps: Click the list item to refresh the data.

8. 8
8）DVR monitor
Remote surveillance can be realized from the current interface (Huge flow rate can be generated
by this function, please use it under the circumstance of WIFI connected)
Configuration requirements:
1. Network frame (gateway, monitor host and router)
2. Router setup
[WAN side]: Network can be accessed if you set the account which is provided by network service
provider
[LAN side]: Start DHCP
[Port forwarding]: Monitor IP (like 192.168.0.70), port mapping (like 12201)
[Port forwarding]Setup can consult to router supplier or view router specification.
3. Monitor setup
[Cancel the alarm]：Main menu-> configuration-> exception handling-> “choose” hard disk is
wrong -> cancel the sound
[Set IP]：Main menu-> configuration-> Network configuration-> basic configuration->"IP, subnet
mask, default gateway, DNS"
For example：IP: 192.168.0.70
Subnet mask: 255.255.255.000
Default gateway: 192.168.0.1
DNS preferred: 218.2.135.1
[Set port]：Main menu--> configuration-> Network configuration-> Advance configuration->"
Server port"
For example：：12201
因特网
路由器
监控网关
Internet
Router
MonitorGateway

9. 9
4. Software setup
[Port]: Default to 12201 (It must be concordant with server port of the monitor setup)
[User name]: Default to admin (It must be concordant with username of the monitor setup)
[Password]: Default to 12345 (It must be concordant with password of the monitor setup)
3.3 Setup function
1）Scene setup
Operational mode of the devices (timing, automation, bind control) under each scene mode can be
set from the current interface.
Operation steps: After setup is completed, please launch it and select the scene from [scene
control] in [Control function].

10. 10
2）Sensor setup
Each device name and its belonging area can be set from the current interface.
3）Area setup
Each area name or adding customized area can be set from the current interface.

11. 11
4）Account setup
Password information of the account can be modified from the current interface. (Suggest
modifying the initial password)
3.4 More function
1）Weather forecast
Local weather forecast can be viewed at the current interface (GPS function must be launched).

12. 12
2）Message recording
All the alarm recording happened before can be viewed from the current interface.
Operation steps:
『Delete』：Delete the selected records.
3）Data synchronization
Sensor setup, area setup, scene setup can be set synchronized to server from local from the current
interface, as well as synchronize to local from the server, so information synchronization from
many client devices like mobile phone, tablet can be realized.
4）Information sharing