The document provides instructions for creating a photo slideshow with audio narration in iMovie, including dragging photos into a project, adjusting photo clip durations, recording narration, adding transitions between clips, and including sound effects.

1. Open iMovie.
Create a New Project under the ‘File’ menu.
Drag the photos you want to use into the Project Library box.

2. Next you need to increase the time duration of your last photo. If you
don’t do this, you may not have enough time to record your full story.
To edit a photo’s settings, you need to:
· Position your cursor on the bottom left
of the clip.
· Click on the small arrow.
· Select 'Clip Adjustments'
· Type in a new value for duration. If you
have read your story out loud before, you will
know how much time you need.

3. Now you are ready to record your story.
· Plug in your microphone.
· Click the microphone icon.
· Select the USB option in 'Record
from'
· Click the start of your photos.
· After the beeps, record your story.
To check your recording, click the start of your clips and
press the play arrow.

4. If you wish, you can add transition affects, alter the duration of photo
clips and add sound effects.
To add transition effects:
· Click on the Transition icon.
· Select the desired transition.
· Drag it between the two clips you want
it to join.
· You can edit the duration in the same
was as photo clips.

5. To add sound effects:
· Click the Sound Effects icon.
· Scroll through the sounds.
· Drag the one you want to the
desired spot in your project.
· Edit the settings to make sure
it isn't too loud. You can make it fade
in and out if you like.

6. To add sound effects:
· Click the Sound Effects icon.
· Scroll through the sounds.
· Drag the one you want to the
desired spot in your project.
· Edit the settings to make sure
it isn't too loud. You can make it fade
in and out if you like.