Claire swaine cv 2016
•Download as DOCX, PDF•
0 likes•27 views
Claire Swaine is an experienced Quality Engineer and Lead Auditor seeking a new challenge. She has extensive experience with ISO 9001 quality management systems in aerospace and oil and gas industries. Her skills include supplier audits, managing non-conformances, and leading improvement projects. Previously she has worked as a Supplier Quality Engineer at B/E Aerospace and as a Projects Quality Engineer at Cortland Fibron BX.
Report
Share
Report
Share
Recommended
CV_Goh Yeu Shan, Aaron
This resume is for Aaron Goh Yeu Shan, a Permanent Resident of Singapore currently working as an Associate Engineer, Quality at UTC Aerospace Systems since May 2013. He has over 5 years of experience in quality engineering, including implementing quality systems, auditing suppliers, and managing a team of quality inspectors. Aaron holds a Diploma in Digital & Precision Engineering from Nanyang Polytechnic and is certified as an internal auditor for AS9100 standards.
QC-Manual
This quality control manual provides definitions and guidance for quality assurance processes. It outlines key terms like quality manual, efficiency, effectiveness, continual improvement, and quality policy. It describes the benefits of authorization like increased reliability and production. The manual establishes organizational roles and responsibilities and defines inspection, testing, and procedures. It presents a quality assurance process that includes calibration, welding control, material control, repair and alteration, and examinations and inspections. Finally, it provides details on inspection points and controlling fabrication.
Muthaiah profile
Muthaiah.C is seeking a quality management position that allows him to utilize over 12 years of experience in quality assurance. He has expertise in quality tools, supplier development, process improvement, and customer relations. Currently he works as an Engineer at Yamaha Motor Electronics India Pvt Ltd, where he assists with quality control plans, develops quality systems, manages suppliers, and addresses customer quality issues.
SUSHEEL DESHPANDE CV
Susheel Deshpande is a senior management professional with over 20 years of experience in purchase operations, supply chain management, new product development, training, and team management. He has extensive expertise in strategic sourcing, vendor development, cost reduction, quality management, and project management. Most recently, he worked as Head of Purchase at Brembo Brake India, where he successfully reduced costs by 1% annually and expanded supplier capacity to support 20% yearly growth.
for quality month 2014
This document summarizes a presentation on supplier quality improvement. It discusses the need for outsourcing parts to reduce costs and focus on core competencies. It then provides statistics on the current level of outsourcing at AMD in Nasik. The presentation outlines AMD's current supplier quality assurance process and notes a need to provide quantitative metrics to suppliers. It proposes using a defect rate metric to classify defects and provide targets to suppliers to improve quality. The methodology for calculating and reviewing defect rates with suppliers is described along with potential pros and cons of the approach.
ShekharResume
This document contains a summary of Shekhar Prakash Buva's qualifications and experience in quality management. He has over 18 years of experience in quality control, inspection, testing, and ensuring compliance with quality standards. Currently he works as a Senior Executive at Crompton Greaves Limited, where he is responsible for quality assurance of power transformers and reactors. Previously he has held roles focused on quality assurance and implementation of quality systems at various manufacturing companies.
Word resume
M. Lakshmanan has over 32 years of experience in quality assurance, process improvement, regulatory affairs, training and development, auditing, and team management. He has expertise in validation, auditing, quality control, and ensuring compliance with quality standards. Most recently, he worked as the Section Head of Standards Room and Quality Engineering at Caterpillar India Private Limited for over 15 years, where he implemented quality programs, assessed suppliers, and mentored employees. He aims to take on quality assurance and control roles in metro cities.
C.V. Ingles CMM-2-3
Carlos Moreno Morales is a quality and safety manager with over 15 years of experience in logistics and manufacturing. He currently manages the quality system and safety policies for Truck Movers Mexico, with responsibilities including developing, implementing, and maintaining quality systems across four terminals, reducing costs from claims, and conducting weekly meetings on corrective actions. Previously he held roles as a terminal manager, corporate quality manager, quality superintendent, and manufacturing engineer, where he oversaw quality inspection, implemented process improvements, and ensured customer satisfaction. He has extensive training in quality management systems, six sigma methodologies, and lean manufacturing techniques.
Recommended
CV_Goh Yeu Shan, Aaron
This resume is for Aaron Goh Yeu Shan, a Permanent Resident of Singapore currently working as an Associate Engineer, Quality at UTC Aerospace Systems since May 2013. He has over 5 years of experience in quality engineering, including implementing quality systems, auditing suppliers, and managing a team of quality inspectors. Aaron holds a Diploma in Digital & Precision Engineering from Nanyang Polytechnic and is certified as an internal auditor for AS9100 standards.
QC-Manual
This quality control manual provides definitions and guidance for quality assurance processes. It outlines key terms like quality manual, efficiency, effectiveness, continual improvement, and quality policy. It describes the benefits of authorization like increased reliability and production. The manual establishes organizational roles and responsibilities and defines inspection, testing, and procedures. It presents a quality assurance process that includes calibration, welding control, material control, repair and alteration, and examinations and inspections. Finally, it provides details on inspection points and controlling fabrication.
Muthaiah profile
Muthaiah.C is seeking a quality management position that allows him to utilize over 12 years of experience in quality assurance. He has expertise in quality tools, supplier development, process improvement, and customer relations. Currently he works as an Engineer at Yamaha Motor Electronics India Pvt Ltd, where he assists with quality control plans, develops quality systems, manages suppliers, and addresses customer quality issues.
SUSHEEL DESHPANDE CV
Susheel Deshpande is a senior management professional with over 20 years of experience in purchase operations, supply chain management, new product development, training, and team management. He has extensive expertise in strategic sourcing, vendor development, cost reduction, quality management, and project management. Most recently, he worked as Head of Purchase at Brembo Brake India, where he successfully reduced costs by 1% annually and expanded supplier capacity to support 20% yearly growth.
for quality month 2014
This document summarizes a presentation on supplier quality improvement. It discusses the need for outsourcing parts to reduce costs and focus on core competencies. It then provides statistics on the current level of outsourcing at AMD in Nasik. The presentation outlines AMD's current supplier quality assurance process and notes a need to provide quantitative metrics to suppliers. It proposes using a defect rate metric to classify defects and provide targets to suppliers to improve quality. The methodology for calculating and reviewing defect rates with suppliers is described along with potential pros and cons of the approach.
ShekharResume
This document contains a summary of Shekhar Prakash Buva's qualifications and experience in quality management. He has over 18 years of experience in quality control, inspection, testing, and ensuring compliance with quality standards. Currently he works as a Senior Executive at Crompton Greaves Limited, where he is responsible for quality assurance of power transformers and reactors. Previously he has held roles focused on quality assurance and implementation of quality systems at various manufacturing companies.
Word resume
M. Lakshmanan has over 32 years of experience in quality assurance, process improvement, regulatory affairs, training and development, auditing, and team management. He has expertise in validation, auditing, quality control, and ensuring compliance with quality standards. Most recently, he worked as the Section Head of Standards Room and Quality Engineering at Caterpillar India Private Limited for over 15 years, where he implemented quality programs, assessed suppliers, and mentored employees. He aims to take on quality assurance and control roles in metro cities.
C.V. Ingles CMM-2-3
Carlos Moreno Morales is a quality and safety manager with over 15 years of experience in logistics and manufacturing. He currently manages the quality system and safety policies for Truck Movers Mexico, with responsibilities including developing, implementing, and maintaining quality systems across four terminals, reducing costs from claims, and conducting weekly meetings on corrective actions. Previously he held roles as a terminal manager, corporate quality manager, quality superintendent, and manufacturing engineer, where he oversaw quality inspection, implemented process improvements, and ensured customer satisfaction. He has extensive training in quality management systems, six sigma methodologies, and lean manufacturing techniques.
Mohamed salah cv
Mohamed Salah Elsayd is seeking a managerial position in quality assurance. He has over 9 years of experience in quality control, quality assurance, auditing quality management systems, and process control. He holds a B.Sc. in Chemistry and is trained and qualified in ISO 9001, quality auditing, and quality tools. Currently he is a Quality Assurance Leader at Procter & Gamble, where he is responsible for quality policies, strategies, audits, and leading teams to achieve targets and improve quality. He has experience leading quality improvement workshops and implementing quality assurance programs.
Shajaruddin Baloch 30.06.2015
Shajar Uddin is a production engineer and quality assurance professional with over 25 years of experience. He has extensive experience managing production operations and quality control. Some of his qualifications include a Bachelor's degree in Mechanical Engineering and certifications in quality management systems. He is seeking a senior role in engineering or manufacturing where he can apply his skills in production, quality assurance, process improvement, and team leadership.
Implementation of the quality system
This document discusses implementing quality systems, measuring cost of quality (COQ), and using statistical process control (SPC) tools to improve quality. It states that COQ is the cost of producing defective products, not the cost of producing good products. Measuring COQ is important for organizations to reduce costs and provide quality at lower prices. One method for reducing COQ is through the use of SPC tools. The objectives are to benchmark quality systems, measure COQ and quality improvements using SPC tools, and develop a framework for ongoing COQ measurement. The methodology involves defining quality systems, reviewing literature on COQ and SPC, analyzing COQ, conducting SPC analysis, and developing corrective action plans.
What is quality
The document discusses quality assurance and quality control. Quality assurance is a proactive process that focuses on processes and preventing defects by understanding requirements upfront and developing plans to meet them. Quality control is reactive and focuses on operational activities like inspection and testing to identify defects and ensure deliverables meet requirements. The quality control process receives input from quality assurance, and if defects are found during quality control, quality assurance will investigate and implement corrective actions to prevent reoccurrence.
KFRes_0916
The document provides a profile and work history for Kevin F. Foy, highlighting his experience over 25 years in quality assurance, reliability, and customer satisfaction roles in the manufacturing industry. Foy has a proven track record of developing quality systems, improving yields and reliability, reducing costs, and ensuring compliance at companies including Agilent Technologies, MKS Instruments, Analogic, Celestica, and BFGoodrich Aerospace. His expertise includes implementing process improvements, problem solving, and developing global supplier networks.
106 quality assurance
The document discusses quality assurance and ISO 9001 standards. It outlines the main features of ISO 9001:2000 which include a process approach, measurement, management, customer satisfaction monitoring and continual improvement. ISO 9001:2000 emphasizes quality management distinct from quality assurance, control and requirements. Quality assurance is important in construction to avoid defects which can cause serious problems or fatalities. Following steps in construction help achieve quality assurance: defining requirements, planning, material testing, and quality control during construction.
Cost of quality
Cost of Quality (CoQ) refers to the total costs associated with maintaining quality and preventing defects. It includes the Cost of Good Quality (COGQ), such as prevention and appraisal costs, and the Cost of Poor Quality (COPQ), including internal and external failure costs. CoQ can be reduced by building quality into processes from the start to minimize defects and failures. The difference between actual costs and hypothetical lower costs with no defects represents the CoQ.
Quality Assurance in Aviation
This was presented in a seminar organized by Pakistan Civil Aviation Authority on 9th Nov 2017 - World Quality Day
Resume
Sachin Saxena is a quality engineer with over 3 years of experience seeking a senior role. He has skills in quality control tools, PPAP documentation, APQP, and other quality processes. As a supplier quality engineer, he worked to improve engineering operations and reduce costs. Some of his accomplishments include developing indigenous clutch release systems, evaluating suppliers to identify gaps, and reducing product rejection rates. He has a Bachelor's degree in Mechanical Engineering and skills in SAP, AutoCAD, GD&T, and Microsoft Office.
Basics of validation
Validation provides evidence that a model or process is strong, powerful, and designed for its intended task. The objectives of validation include ensuring product quality, manufacturing consistency, process reproducibility, and demonstrating process robustness. Successful validations require comprehensive training programs, validation protocols, batch sheets, critical cGMP programs, and validation master plans approved by all departments including regulatory affairs. Major challenges in validation include ensuring sterility, critical cGMP programs, instrument calibration, preventive maintenance, cleaning procedures, supplier audits, and environmental and process monitoring programs. Types of validation include prospective, concurrent, and retrospective validation. Steps involve facility acceptance testing, IQ/OQ/PQ qualification, identifying critical parameters, validating the process, and documenting validation records including critical
Presentation on Establishing Quality Objectives
Top management shall ensure that quality objectives are established at relevant functions and levels within the organization. Quality objectives must be measurable and consistent with the quality policy. A quality objective aims for continual improvement and follows the SMART criteria of being specific, measurable, achievable, realistic, and time-bound. The steps to establish a quality objective include: 1) establishing a foundation based on quality policy and business objectives, 2) selecting key measurable parameters, 3) writing a quality objective statement focusing on improvement, 4) designing an implementation strategy, and 5) compiling and analyzing relevant data.
Quality ToolBox Talk_Quality Management in Construction 101(for Senior Manage...
Quality ToolBox Talk_Quality Management in Construction 101(for Senior Manage...Quality In Construction
This is a very simple and quick presentation for an introduction to the senior Management of a construction company (e.g. contractor). These 16 slides will help someone who has never been involved in quality management to understand why we need it in construction industry.Quality Management Plan
This document outlines Team Epsilon's Quality Management Plan. It defines the purpose of the QM plan as ensuring quality is planned for and describes how quality will be managed through quality assurance and control activities using defined standards and metrics. The approach involves the project team, metrics, and a quality group. Metrics cover schedule, resources, process, and product performance. Quality assurance tools assess processes based on acceptable standards and performance at intervals. Quality control tools measure features against required values and determine if they are acceptable or need recommendations for resolution. The process focuses on planning, strategy, resources, tools, and is continuous after launch.
vijay bharathi
The document is a resume for an individual seeking roles in quality control, quality assurance, inspection, and customer support. It summarizes the applicant's educational qualifications including a master's degree in production and quality management. It also outlines over 3 years of professional experience in quality control and quality assurance roles at two companies, and responsibilities including auditing, process improvement, handling customer complaints, and ensuring product quality. Technical skills and qualifications in areas such as ISO standards, electrical testing, and CAD software are also mentioned.
supplier quality management skills and responsibilities
This role is responsible for ensuring suppliers develop processes that meet the customer's design requirements and are compliant with the customer's needs through on-site audits. This role will manage budget and people. The overall purpose is to deliver quality assurance functions to ensure the company's products and services meet customer expectations and quality standards.
Sanjeev - cv
Sanjeeva Tella is seeking a manager position in quality assurance, control, project management, or related fields in the Middle East or Asia. He has over 20 years of experience in quality assurance and control, project management, and inspection roles. He is skilled in implementing quality management systems, conducting audits, managing teams, and ensuring standards compliance.
Sanjeev cv
This document provides a summary of Sanjeeva Tella's qualifications and experience. He has over 20 years of experience in quality management roles in engineering, procurement, construction, maintenance, and operations in the oil and gas industry. He is seeking a manager role in quality assurance/quality control, project management, or engineering. He has extensive experience implementing quality management systems and ensuring adherence to technical specifications and standards on large EPC projects in the Middle East and Asia. He has qualifications in quality auditing, welding inspection, non-destructive testing, and other areas.
Testing, qa, qc. what the difference
The document discusses the differences between testing, quality control (QC), and quality assurance (QA) in software development. It states that testing is the process of evaluating software to check if it meets requirements and finds errors, QC checks test results to identify defects in the finished product, and QA focuses on preventing defects by improving development processes.
Wilai Boonmark3
Wilai Boonmark has over 25 years of experience in supply chain and materials management. She currently works as the Plant Materials & Logistics Manager at Eagle Ottawa, LLC, where she is responsible for overseeing the entire flow of materials from procurement to finished products. Previously, she held positions with increasing responsibility in supply chain planning and purchasing at several automotive companies in Thailand. She has extensive experience with ERP systems like SAP and QAD and skills in inventory management, project management, quality control, and leadership.
Claire swaine cv 2016
Claire Swaine is an experienced Quality Engineer and Lead Auditor seeking a new challenge. She has extensive experience with ISO 9001 quality management systems in aerospace and oil and gas. Her skills include supplier audits, managing non-conformances, and leading improvement projects. Previously she has worked as a Supplier Quality Engineer at B/E Aerospace and as a Projects Quality Engineer at Cortland Fibron BX.
Seismic Remediation of Dams in California, An Engineering Geology Perspective
This document discusses the seismic remediation of dams in California from an engineering geology perspective. It describes how dams with potential seismic deficiencies are identified, such as those built with outdated construction methods like hydraulic fill dams. Embankment dams on liquefiable foundations and those with a history of poor performance are also flagged. The California Division of Safety of Dams conducts periodic reassessments of dams to identify any needing upgrades to withstand earthquake loads. Remediation projects strengthen vulnerable components and foundations to improve seismic stability. Engineering geologists play a key role in characterizing seismic hazards and site conditions to evaluate dams and design remedial measures.
Sr. Academic Personnel Effective Analyst - Job Announcement
The Sr. Academic Personnel Effective Analyst is responsible for initiatives to develop AP processes, documentation, tools, training materials and implementation strategies for the service delivery and operational team within CSS Human Resources / Academic Personnel (HR/APS). The incumbent will utilize their in-depth knowledge of academic personnel and human resources to ensure that CSS HR/APS processes and tools follow applicable federal, state, UC system wide and local campus laws and policies. Utilize understanding of academic departmental business needs and culture to ensure that CSS HR/APS processes and tools adequately meet customer needs while accomplishing appropriate workflow within a shared service environment.
More Related Content
What's hot
Mohamed salah cv
Mohamed Salah Elsayd is seeking a managerial position in quality assurance. He has over 9 years of experience in quality control, quality assurance, auditing quality management systems, and process control. He holds a B.Sc. in Chemistry and is trained and qualified in ISO 9001, quality auditing, and quality tools. Currently he is a Quality Assurance Leader at Procter & Gamble, where he is responsible for quality policies, strategies, audits, and leading teams to achieve targets and improve quality. He has experience leading quality improvement workshops and implementing quality assurance programs.
Shajaruddin Baloch 30.06.2015
Shajar Uddin is a production engineer and quality assurance professional with over 25 years of experience. He has extensive experience managing production operations and quality control. Some of his qualifications include a Bachelor's degree in Mechanical Engineering and certifications in quality management systems. He is seeking a senior role in engineering or manufacturing where he can apply his skills in production, quality assurance, process improvement, and team leadership.
Implementation of the quality system
This document discusses implementing quality systems, measuring cost of quality (COQ), and using statistical process control (SPC) tools to improve quality. It states that COQ is the cost of producing defective products, not the cost of producing good products. Measuring COQ is important for organizations to reduce costs and provide quality at lower prices. One method for reducing COQ is through the use of SPC tools. The objectives are to benchmark quality systems, measure COQ and quality improvements using SPC tools, and develop a framework for ongoing COQ measurement. The methodology involves defining quality systems, reviewing literature on COQ and SPC, analyzing COQ, conducting SPC analysis, and developing corrective action plans.
What is quality
The document discusses quality assurance and quality control. Quality assurance is a proactive process that focuses on processes and preventing defects by understanding requirements upfront and developing plans to meet them. Quality control is reactive and focuses on operational activities like inspection and testing to identify defects and ensure deliverables meet requirements. The quality control process receives input from quality assurance, and if defects are found during quality control, quality assurance will investigate and implement corrective actions to prevent reoccurrence.
KFRes_0916
The document provides a profile and work history for Kevin F. Foy, highlighting his experience over 25 years in quality assurance, reliability, and customer satisfaction roles in the manufacturing industry. Foy has a proven track record of developing quality systems, improving yields and reliability, reducing costs, and ensuring compliance at companies including Agilent Technologies, MKS Instruments, Analogic, Celestica, and BFGoodrich Aerospace. His expertise includes implementing process improvements, problem solving, and developing global supplier networks.
106 quality assurance
The document discusses quality assurance and ISO 9001 standards. It outlines the main features of ISO 9001:2000 which include a process approach, measurement, management, customer satisfaction monitoring and continual improvement. ISO 9001:2000 emphasizes quality management distinct from quality assurance, control and requirements. Quality assurance is important in construction to avoid defects which can cause serious problems or fatalities. Following steps in construction help achieve quality assurance: defining requirements, planning, material testing, and quality control during construction.
Cost of quality
Cost of Quality (CoQ) refers to the total costs associated with maintaining quality and preventing defects. It includes the Cost of Good Quality (COGQ), such as prevention and appraisal costs, and the Cost of Poor Quality (COPQ), including internal and external failure costs. CoQ can be reduced by building quality into processes from the start to minimize defects and failures. The difference between actual costs and hypothetical lower costs with no defects represents the CoQ.
Quality Assurance in Aviation
This was presented in a seminar organized by Pakistan Civil Aviation Authority on 9th Nov 2017 - World Quality Day
Resume
Sachin Saxena is a quality engineer with over 3 years of experience seeking a senior role. He has skills in quality control tools, PPAP documentation, APQP, and other quality processes. As a supplier quality engineer, he worked to improve engineering operations and reduce costs. Some of his accomplishments include developing indigenous clutch release systems, evaluating suppliers to identify gaps, and reducing product rejection rates. He has a Bachelor's degree in Mechanical Engineering and skills in SAP, AutoCAD, GD&T, and Microsoft Office.
Basics of validation
Validation provides evidence that a model or process is strong, powerful, and designed for its intended task. The objectives of validation include ensuring product quality, manufacturing consistency, process reproducibility, and demonstrating process robustness. Successful validations require comprehensive training programs, validation protocols, batch sheets, critical cGMP programs, and validation master plans approved by all departments including regulatory affairs. Major challenges in validation include ensuring sterility, critical cGMP programs, instrument calibration, preventive maintenance, cleaning procedures, supplier audits, and environmental and process monitoring programs. Types of validation include prospective, concurrent, and retrospective validation. Steps involve facility acceptance testing, IQ/OQ/PQ qualification, identifying critical parameters, validating the process, and documenting validation records including critical
Presentation on Establishing Quality Objectives
Top management shall ensure that quality objectives are established at relevant functions and levels within the organization. Quality objectives must be measurable and consistent with the quality policy. A quality objective aims for continual improvement and follows the SMART criteria of being specific, measurable, achievable, realistic, and time-bound. The steps to establish a quality objective include: 1) establishing a foundation based on quality policy and business objectives, 2) selecting key measurable parameters, 3) writing a quality objective statement focusing on improvement, 4) designing an implementation strategy, and 5) compiling and analyzing relevant data.
Quality ToolBox Talk_Quality Management in Construction 101(for Senior Manage...
Quality ToolBox Talk_Quality Management in Construction 101(for Senior Manage...Quality In Construction
This is a very simple and quick presentation for an introduction to the senior Management of a construction company (e.g. contractor). These 16 slides will help someone who has never been involved in quality management to understand why we need it in construction industry.Quality Management Plan
This document outlines Team Epsilon's Quality Management Plan. It defines the purpose of the QM plan as ensuring quality is planned for and describes how quality will be managed through quality assurance and control activities using defined standards and metrics. The approach involves the project team, metrics, and a quality group. Metrics cover schedule, resources, process, and product performance. Quality assurance tools assess processes based on acceptable standards and performance at intervals. Quality control tools measure features against required values and determine if they are acceptable or need recommendations for resolution. The process focuses on planning, strategy, resources, tools, and is continuous after launch.
vijay bharathi
The document is a resume for an individual seeking roles in quality control, quality assurance, inspection, and customer support. It summarizes the applicant's educational qualifications including a master's degree in production and quality management. It also outlines over 3 years of professional experience in quality control and quality assurance roles at two companies, and responsibilities including auditing, process improvement, handling customer complaints, and ensuring product quality. Technical skills and qualifications in areas such as ISO standards, electrical testing, and CAD software are also mentioned.
supplier quality management skills and responsibilities
This role is responsible for ensuring suppliers develop processes that meet the customer's design requirements and are compliant with the customer's needs through on-site audits. This role will manage budget and people. The overall purpose is to deliver quality assurance functions to ensure the company's products and services meet customer expectations and quality standards.
Sanjeev - cv
Sanjeeva Tella is seeking a manager position in quality assurance, control, project management, or related fields in the Middle East or Asia. He has over 20 years of experience in quality assurance and control, project management, and inspection roles. He is skilled in implementing quality management systems, conducting audits, managing teams, and ensuring standards compliance.
Sanjeev cv
This document provides a summary of Sanjeeva Tella's qualifications and experience. He has over 20 years of experience in quality management roles in engineering, procurement, construction, maintenance, and operations in the oil and gas industry. He is seeking a manager role in quality assurance/quality control, project management, or engineering. He has extensive experience implementing quality management systems and ensuring adherence to technical specifications and standards on large EPC projects in the Middle East and Asia. He has qualifications in quality auditing, welding inspection, non-destructive testing, and other areas.
Testing, qa, qc. what the difference
The document discusses the differences between testing, quality control (QC), and quality assurance (QA) in software development. It states that testing is the process of evaluating software to check if it meets requirements and finds errors, QC checks test results to identify defects in the finished product, and QA focuses on preventing defects by improving development processes.
Wilai Boonmark3
Wilai Boonmark has over 25 years of experience in supply chain and materials management. She currently works as the Plant Materials & Logistics Manager at Eagle Ottawa, LLC, where she is responsible for overseeing the entire flow of materials from procurement to finished products. Previously, she held positions with increasing responsibility in supply chain planning and purchasing at several automotive companies in Thailand. She has extensive experience with ERP systems like SAP and QAD and skills in inventory management, project management, quality control, and leadership.
What's hot (19)
Quality ToolBox Talk_Quality Management in Construction 101(for Senior Manage...
Quality ToolBox Talk_Quality Management in Construction 101(for Senior Manage...
supplier quality management skills and responsibilities
supplier quality management skills and responsibilities
Viewers also liked
Claire swaine cv 2016
Claire Swaine is an experienced Quality Engineer and Lead Auditor seeking a new challenge. She has extensive experience with ISO 9001 quality management systems in aerospace and oil and gas. Her skills include supplier audits, managing non-conformances, and leading improvement projects. Previously she has worked as a Supplier Quality Engineer at B/E Aerospace and as a Projects Quality Engineer at Cortland Fibron BX.
Seismic Remediation of Dams in California, An Engineering Geology Perspective
This document discusses the seismic remediation of dams in California from an engineering geology perspective. It describes how dams with potential seismic deficiencies are identified, such as those built with outdated construction methods like hydraulic fill dams. Embankment dams on liquefiable foundations and those with a history of poor performance are also flagged. The California Division of Safety of Dams conducts periodic reassessments of dams to identify any needing upgrades to withstand earthquake loads. Remediation projects strengthen vulnerable components and foundations to improve seismic stability. Engineering geologists play a key role in characterizing seismic hazards and site conditions to evaluate dams and design remedial measures.
Sr. Academic Personnel Effective Analyst - Job Announcement
The Sr. Academic Personnel Effective Analyst is responsible for initiatives to develop AP processes, documentation, tools, training materials and implementation strategies for the service delivery and operational team within CSS Human Resources / Academic Personnel (HR/APS). The incumbent will utilize their in-depth knowledge of academic personnel and human resources to ensure that CSS HR/APS processes and tools follow applicable federal, state, UC system wide and local campus laws and policies. Utilize understanding of academic departmental business needs and culture to ensure that CSS HR/APS processes and tools adequately meet customer needs while accomplishing appropriate workflow within a shared service environment.
AKASH_RESUME
This resume is for Akash Gupta, who is currently working as an IVR Developer at Bharti Airtel. He has over 2 years of experience developing and maintaining IVR applications using tools like Nortel CS 1000, CCMS, and CCT6.0. He has a B.Tech degree from PTU University and has strong skills in programming languages like C++ and PHP as well as databases like SQL and Oracle. His projects include developing IVR applications for Bharti Airtel and the 139 Railway Enquiry Service.
Dan O'Callahan Resume
Dan O'Callahan Resume: Executive leader experienced at transforming technology operations, improving business performance and facilitating revenue growth by architecting and implementing cost-effective, robust and flexible systems and infrastructure.
• Customer Service
• Sales Support
• Project Management
• Systems Development
• Business Intelligence
• Analytics
• Databases
• Network & Security
• Telecommunications
• Call Center Support
• Data-Center Operations
• Business Continuity
Quality Engineer
Harsh Kumar Yadav is seeking a position that utilizes his 4+ years of experience in quality engineering. He currently works as a senior quality engineer for MCM Telecom Equipment Pvt. Ltd, where he is responsible for monitoring quality, compliance, and ensuring products meet standards. Previously he has held quality engineer roles at Mariam Electronics Pvt. Ltd and Orient Electric Pvt. Ltd, where he performed inspections and testing. He has expertise in quality control tools, process improvement, testing, auditing, and data collection.
Babu sm Quality Engineer new
This document contains the resume of S.M. Babu, a 26-year-old male from Tamil Nadu, India seeking a position in the manufacturing industry. He has 5 years of experience working in steel fabrication and automotive manufacturing companies, most recently as a Painting Engineer at Techno Fab Mfg Ltd. He holds a Diploma in Mechanical Engineering and has experience in production, quality control, and project management. His skills include welding inspection, painting inspection, and coordinating with customers and third-party inspectors. He is proficient in MS Office and seeks a role as a Production, Painting, Quality Control, or Incoming Quality Engineer.
Credit analyst, high yield, distressed debt
Ronald Rich has over 20 years of experience in credit analysis, distressed investing, and corporate restructuring. He has specialized in analyzing high yield and distressed debt across various industries. He currently works as a senior restructuring advisor where he leads negotiations to restructure troubled fixed income investments.
NISHANT SAXENA QUALITY ENGINEER RESUME
Nishant Saxena is seeking a quality assurance engineer role in the automobile industry. He has over 5 years of experience as an assistant quality engineer intern at Musashi Auto Parts, where he conducted pre-dispatch inspections, analyzed rejection data, verified countermeasures, conducted warranty analysis, and ensured FIFO systems. Nishant has a B.Tech in Mechanical and Automation Engineering, with knowledge of manufacturing processes, quality tools like SPC and 7QC, and CAD software like CATIA and ProEngineer. He has also completed academic and industrial training projects related to refrigeration systems and automotive part manufacturing.
Credit Banking Analyst Sample Resume
John Doe is an experienced risk and credit analyst seeking a new opportunity. He has over 20 years of experience analyzing organizational and financial data to optimize various metrics like retention rates and customer satisfaction. As a team lead, he developed new techniques to standardize credit application reviews and led rapid changes to procedures. He is proficient in various systems like Salesforce, Six Sigma, and NICE.
JAIME ENRIQUE ERWIN GARCIA
This document contains a resume for Jaime Enrique Erwin Garcia. It summarizes his experience as an IT professional with 19 years of experience in software project management, product development, and operations across various industries including the federal government. It details his education, skills, and work history managing teams and leading implementations of various technologies such as Java, data analytics solutions, and digital marketing platforms.
Viewers also liked (11)
Seismic Remediation of Dams in California, An Engineering Geology Perspective
Seismic Remediation of Dams in California, An Engineering Geology Perspective
Sr. Academic Personnel Effective Analyst - Job Announcement
Sr. Academic Personnel Effective Analyst - Job Announcement
Similar to Claire swaine cv 2016
Daniel Bautista rev2
This document contains the resume of Daniel Bautista Sabino. He has nearly 20 years of experience in quality systems implementation and maintenance. He is proficient in ISO 9001, ISO 14001, TS-16949 and has experience implementing quality management systems. Some of his responsibilities include internal auditing, supplier management, cost reduction projects, and quality training. He is seeking a position where he can utilize his quality and project management experience.
Daniel bautista rev2
This document contains the resume of Daniel Bautista Sabino. It outlines his objective of driving efficiency through organizational functions using strategies that support communication and improvements. It then details his nearly 20 years of experience in quality systems implementation and maintenance including ISO and TS certifications. Key responsibilities involved auditing, supplier selection, relationship building, training, and metrics reporting. Recent roles included quality roles at Microsoft, Panasonic, and Fansteel with responsibilities like system maintenance, auditing, issue resolution, and cost reduction projects.
Amod Prakash Resume
Amod Prakash has over 18 years of experience in quality assurance and management roles in the plastics industry. He currently works as the Senior Manager of Quality Assurance and Management Representative at Mutual Industries Ltd. in Pune, where he leads quality inspection programs, audits, and continuous improvement initiatives to reduce defects. He has expertise in new product development, supplier quality management, and implementing quality management systems like ISO and TS standards.
Rajesh J ( Current CV)
This document provides a summary of Rajesh J's professional experience and qualifications. He has over 7 years of experience in quality assurance and quality control roles, including working as a Senior Engineer - Quality Control & Quality Assurance at Larsen & Toubro Limited. He has extensive experience in managing quality assurance operations, conducting audits, developing quality plans, and leading teams. Rajesh also has several technical certifications in quality management systems and non-destructive testing.
Gary Wyngaardt CV 19072016
This document provides information on Gary Wyngaardt's background and experience. It includes details on his education, professional experience, and qualifications. Wyngaardt has over 20 years of experience in quality assurance and project management. He is currently the Quality Manager at Dynamic Instruments, where he oversees quality staff and ensures compliance with ISO standards. Previously, he held quality assurance roles at Alstom and Foster Wheeler.
Quality Manager-Damon Goodwin
Damon Goodwin has over 20 years of experience in quality management roles. He is currently a Quality Manager at McLaughlin Body Company, where he is responsible for overall quality, managing quality staff, ensuring supplier and customer requirements are met, and leading continuous improvement efforts. Prior to this role, he held quality engineer and supervisor roles at several automotive suppliers, where he developed quality programs, managed suppliers, and ensured compliance with ISO standards.
Resume_Arup Barman Roy
This resume summarizes an individual with over 11 years of experience in quality control, quality assurance, operations management, and business excellence roles. The candidate's objective is to seek an assignment where they can contribute significantly by implementing world-class practices from their diverse experience. Key experiences include leading quality assurance functions, managing production operations, implementing cost savings, and ensuring adherence to quality standards.
ISO 9000:2000
The document introduces ISO 9001:2000, the second revision of the quality management system standard from the International Organization for Standards. It highlights the key changes in the new standard, including a process approach and continual improvement cycle. It outlines the eight quality management principles and explains the requirements around management responsibility, resource management, product realization, measurement, analysis and improvement.
CVDEC14
P Venkata Ramana Murthy has over 28 years of experience in operations management, quality management, planning, and team management. He is proficient in production operations, quality control, and project completion. Some of his responsibilities have included maintaining and upgrading quality systems, conducting audits, preparing standard operating procedures, and supplier development. He has worked in various industries like manufacturing, life sciences, and engineering. He holds a postgraduate diploma in marketing management and a bachelor's degree in mechanical engineering.
Alkaff CV. Quality Manager
This document provides a resume for Abdullah Omar AL-Kaff, who is seeking a position as a Quality Control/Assurance Manager. It summarizes his educational background, including a Bachelor's Degree in industrial Engineering from Jordan University of Science and Technology. It also outlines his extensive work experience in quality control and assurance roles over 15 years, along with his skills in areas like statistical analysis, auditing, and computer programs. Finally, it lists his qualifications, publications, references, and contact information.
Software Quality Assurance
The document provides an overview of an SQA workshop on quality and process concepts. It discusses quality models, the SQA role, and audit systems. Key topics covered include quality definitions, quality gurus, total quality management, process management, industry quality models like ISO 9001 and CMMI, quality system elements, and the purpose and types of audits.
Embedding quality assurance within procurement
The document discusses procurement quality assurance and its importance. It describes the key activities in procurement quality assurance like developing a procurement quality strategy, evaluating supplier quality in tenders, monitoring supplier quality performance, and ensuring quality requirements are included in contracts. The goal is to embed quality considerations throughout the procurement process from the initial tender stage through supplier performance monitoring after contract placement. This helps manage quality risks and assure the delivery of products and services that meet requirements.
Varun
Varun Katyal is seeking a leadership position utilizing over 5 years of experience in quality testing, inspection, and auditing of sheet metal fabrication. He has strong technical skills in non-destructive testing, quality management systems, and drawing interpretation. As Quality Assurance Manager, he reduced rejection and repair levels through process validation and maintaining quality standards.
Resume for quality
The document is a resume for K. Srinivasaraghavan applying for a quality position. It summarizes his over 25 years of experience in quality assurance functions, including implementing manufacturing standards and quality control plans. It also lists his accomplishments achieving product development, managing quality audits, and leading teams. Srinivasaraghavan is currently a Deputy Manager of QA/QC and is seeking a new role in a reputable manufacturing organization, preferably in equipment fabrication.
Trang nguyen qam
Trang Nguyen has over 10 years of experience in quality assurance roles. She is currently the Country QA Manager for Intersnack Cashew Company in Vietnam where she manages QA activities including quality control, research and development, and QA teams. Previously she held QA roles of increasing responsibility at Coca-Cola Beverages Vietnam and Guyomarc'h Vietnam, where she implemented quality management systems, conducted audits, ensured regulatory compliance, and helped factories achieve certifications. She aims to become a Regional QA Manager and has skills in quality management systems, auditing, food safety regulations, and languages.
Resume tammy michalski august 2016
Tammy Michalski has over 20 years of experience in quality management and continuous improvement roles. She holds an Associate's Degree in Business Management. Her most recent role is Quality Manager at Newell-Brands, where she leads quality initiatives, ISO certification, and customer audits. Previously, she held roles such as Senior Quality Engineer and Lean Engineer, implementing process improvement projects resulting in significant cost savings and productivity gains.
Kevin blaney qual ops
Kevin Blaney is seeking a quality management position. He has over 20 years of experience in quality assurance, operations management, and customer service roles. Currently he is the Quality Manager at Antenna Research Associates where he is responsible for maintaining the ISO quality management system and driving continuous improvement. Previously he held roles as Assistant Director of Operations and Field Service Representative where he ensured compliance with specifications, developed training programs, and provided customer support. He has a degree in Business Administration and certifications in Six Sigma and quality management.
Sanjeev - cv
This document provides a summary of Sanjeeva Tella's qualifications and experience. He has over 20 years of experience in quality management roles in engineering, procurement, manufacturing, construction, and operations in the oil and gas industry. Currently he works as a Project Quality Manager for Galfar Engineering & Contracting WLL in the UAE, managing quality for an EPC project involving gas wells, flow lines, and gas stations. He has extensive experience developing and implementing quality management systems and plans, performing audits, and ensuring adherence to standards and specifications.
CV-SBERA
Mr. Subhasis Bera is applying for the position of QA/QC Expert/Manager with over 17 years of experience in QA/QC, welding, NDT, painting and auditing. He has a B.Sc and B.Tech in mechanical engineering and is certified in welding inspection, NDT, quality auditing and management. He has worked on numerous projects in various industries for clients around the world, developing and implementing quality plans and procedures.
QMS UNDERSTANDING & IMPLEMENTING ISO 9001 2015.pptx
The document provides an agenda for a two-day training course on understanding and implementing ISO 9001:2015. Day 1 covers introductions to quality and the ISO standard, as well as context of the organization, leadership, planning, support, and performance evaluation and improvement. Presentation topics include what is quality, customer requirements, responsibility for quality, and the structure and requirements of ISO 9001:2015. Day 2 will focus on operation, monitoring and measurement, internal auditing, and management review.
Similar to Claire swaine cv 2016 (20)
QMS UNDERSTANDING & IMPLEMENTING ISO 9001 2015.pptx
QMS UNDERSTANDING & IMPLEMENTING ISO 9001 2015.pptx
Recently uploaded
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recently uploaded (20)
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Claire swaine cv 2016
- 1. Claire Swaine 22 Lower Hazeldines, Marston Moretaine cl_swaine@live.com Mobile: 07725266185 Profile Experienced Quality Engineer and Lead Auditor looking for a new challenge in which to further develop. Extensive exposure to ISO 9001 QMS with strong communication and team working skills allow me to add value to a quality department and improve cost of quality. I have lead various improvement projects and have both Aerospace and Oil and Gas experience. Employment History Supplier Quality Engineer, B/E Aerospace Ltd., October 2015 - present Supplier evaluation and audits to ISO9001 and AS9100 Monitor and manage supplier NCR’s and corrective actions Work with purchasing and manufacturing to improve supplier performance Initiate and manage improvement plans Responsible for developing suppliers using the appropriate quality tools (inc. process capability, FMEA, 7D/8D, fool proofing, 5 Whys, Pareto charts) Provide support to suppliers in development of corrective actions where necessary Give quality input into strategic purchasing decisions Management of approved supplier database Drive supplier quality management in line with AS9100 and SC21 Ensure new and existing suppliers understand and meet B/E’s quality requirements Material Review Board – the disposition and resolution of more complex issues with incoming goods Management of own schedule and development to achieve agreed goals Communicate to all levels within the organisation on quality related topics Projects Quality Engineer, Cortland Fibron BX Ltd, September 2014 – October 2015 Creating and controlling quality documents including Inspection Test Plans Ensuring traceability for individual contracts Reviewing contract documentation to ensure compliance with quality requirements Liaison between projects and customers regarding all matters relating to project specific quality requirements Ensuring and verifying implementation of Project Quality Plans, Inspection Test Plans and any other contractual requirements are implemented to customer satisfaction Verifying compliance to ISO9001 and internal QMS procedure through monitoring and audit Member of the dedicated Quality Team for NCR review and resolution Trained and experienced in various problem solving techniques including PFMEA and 8D Liaising with sub-contractors QA/QC as required. Supplier monitoring Managing quality records from contractors and suppliers Reporting Quality metrics to all levels of management
- 2. Claire Swaine 22 Lower Hazeldines, Marston Moretaine cl_swaine@live.com Mobile: 07725266185 Other Employment History QHSE Administrator, Cortland Fibron BX Ltd July 2012 – September 2014 Various administrative positions (available upon request) May 2008 – February 2012 Student Ambassador and mentoring Sept’ 2008 – July 2011 Voluntary work July 2005 – September 2010 Education and training June ’14 EPDM system administration Qualified April ‘14 Lead Auditor Passed Sept’ ’08 – June ‘11 Sept’ ’06 – June ‘08 Sept’ ’04 – June ‘06 BSc (Hons) Psychology 300 UCAS Points 12 A* - B GCSE’s 2:2 A Level English – B A Level Geography – C A Level Physics – D AS Mathematics – E Including B in English, A in Mathematics