WE AS A GROUP HAVE DONE A PROJECT ON PLANNING AND ANALYSIS OF A COMMERCIAL BUILDING USING STAAD PRO.

1. PLANNING, DESIGNING AND ESTIMATION
OF A COMMERCIAL BUILDING
(THIRD REVIEW)
PROJECT MEMBERS:
o BAHAR ANJUM SHAIK – 17711A0101
o D. HARINI – 17711A0106
o B. ANGEL SUPRIYA – 17711A0103
o P
. SUPRIYA – 17711A0142
o D.LEO DEVENCY – 17711A0108
UNDER GUIDANCE OF
SYED MUSHTAQ

2. CONTENTS:
1. LITERATURE REVIEW
2. PROBLEM IDENTIFICATION
3. METHODOLOGY
4. PROJECT PROGRESS
1. PROJECT PROGRESS
2. PARTIAL RESULT
3. DISCUSSIONS

3. PROJECT PROGRESS:
Our building is designed and analyzed in staad pro v8i
software.
All the columns, beams, footing, slabs and load
calculations are done manually and also in it
respectively.
Thewhole structure is then showed in rendered view
(3D).

4. DESIGN OF BEAM - 1

7. DESIGN OF BEAM - 11

10. DESIGN OF
TWO WAY SLAB

14. DESIGN OF COLUMN

16. DESIGN OF STAIRCASE

20. DESIGN OF
ISOLATED FOOTING

25. PROJECT PROGRESS:

26. PROJECT PROGRESS:

27. PROJECT PROGRESS:

28. PROJECT PROGRESS:

29. PROJECT PROGRESS:

30. PROJECT PROGRESS:

31. PROJECT PROGRESS:

32. PROJECT PROGRESS:

33. PROJECT PROGRESS:

34. PROJECT PROGRESS:

35. PROJECT PROGRESS:

36. PROJECT PROGRESS:

37. PROJECT PROGRESS:

38. PROJECT PROGRESS:

39. PROJECT PROGRESS:

40. PROJECT PROGRESS:

41. PROJECT PROGRESS:

42. PROJECT PROGRESS:

43. PROJECT PROGRESS:

44. PROJECT PROGRESS:

45. PROJECT PROGRESS:

46. PROJECT PROGRESS:

47. PROJECT PROGRESS:

48. PROJECT PROGRESS:

49. 1. 1.1……
PARTIAL RESULT:
From the above analysis we got the results of the reinforcement
needed in columns, beams, slabs and foundations.
The results of the above are shown in next slides.

54. DISCUSSIONS:
Planning was done in AutoCAD.
Designing and analysis in Staad pro.
Next we will estimate the total cost of the structure in Microsoft Excel.
Estimation process will involve the following:
1. Quantitative estimation
2. Cost estimation
3. Total cost
 Earthwork, manpower required and equipment needed also will be
estimated.

58. THANKYOU.