PV syst software is one of the oldest software, developed by the university of Geneva, in 1992 In 1992, he started to develop the PV syst software for case study and simulation of the photovoltaic system . he develops a tool for the 3D shading constructions, the simulation of stand alone and Grid connected PV system

1. Design and Performance Analysis of Grid
Connected Solar PV system using PV-syst
Software
Project #1
BILAL ALAM
Department of Electrical Engineering
ZH collage of Engineering and Technology
AMU, Aligarh

2. OUTLINE
• Introduction
• Case study
• Result and Discussion
• Refrencess

3. INTRODUCTION
1. About the Software
• One of the oldest software, developed by university of Geneva
• Main Features.
1. Meteorological data analysis.
2. Complete database of PV modules, Inverter and Meteo data.
3. Import of solar radiation data from Metenorm, NASA and many other
database.

4. CONTD…
• Create your self and Import PV Module and solar Inverter data from
Photon international.
• Shadow Analysis Using 3D Modules.
• Design Simulation of Grid connected, Standalone .
• Export the data into XPS and converted into pdf.

5. CASE STUDY
• Location
1. Coordinates: Longitude &
latitude
2. Address
Technical Details
1. Type of System
2. PV module Technology
3. Module capacity
4. Inverter

6. CONTD…
• Steps that are used .
1. Checklist for the client.
2. Geographical Detail
3. Import Meteo Data
4. System Design
5. Input Parameter

7. CONTD…
6. Orientations
7. System
8. Inverter selection
9. Losses
10. External Transformer
11. Module Quality Loss/Mismatch Loss/Soiling loss

8. Result and Discussion
• Simulation Execution
This Simulation shall be perform
with consideration of meteo value
(Hourly/Day/Monthly).

9. SIMULATION RESULT
• This section shows the following
details:
1. Project title
2. Site location
3. Project Capacity
4. Selected Module/Make.
5. Inverter Make/No. of Inverter
6. Energy Generation
7. Energy Yield (in First year of
Operation )
8. Performance Ratio.
You can generate the whole result as
in report analyse the simulation result
save the simulation studies .

10. SIMULATION RESULT PICS
Fig 2. (a)Inverter / Make (b)Performance ratio (c) Loss diagram (d) Module/ Make

11. THANK YOU