Mr. Sahyoun is a Professional electrical engineer with excellent Management skills (PMP certified) adding to his expert level in the domain of construction, and commissioning within the field of power generation, Power transmission and Distribution (T&D), HV substations, and different industrial, infrastructural, and residential projects (MEP)... He has a wide range of expertise in HV transmission systems, distribution networks, and power station BOP (balance of Plant), with necessary skills to work in multi-discipline environment with mechanical, instrumentation, and Civil engineering. His main expertise started earlier in his career as an Electrical Protection and Control systems'​ engineer including Automation. Moreover, he has got an excellent technical knowledge in power transformers, LV, MV, HV switchgear (Air insulated, vacuum and GIS), Electrical plant auxiliaries (DC, UPS, etc), grounding and lightning protection, Analysis and calculations (system studies, systems and equipments sizing, system architecture, ...) . Nevertheless, Amid has worked in development of all type of electrical drawings starting from the conceptual design to the detailed engineering like: single line diagrams; Protection and metering diagrams; logic diagrams; schematic diagrams, control system architecture, etc... He has got the technical know-how of power network study and analysis including Load flow, short circuit, and transient stability analysis. Amid was responsible for the training center of Areva-ASD (Alstom), to tutor and train the new engineers. Amid's Goal, is to contribute in the development of green energy as he believes it is the future power for mankind. Key qualifications: Engineering and Project Management Professional (PMP certified) Power Generation Expert (Fossil Fuel: Oil & Gas) Energy Transmission and Distribution Expert (EHV, HV, MV) Protection and Control Systems MEP design and construction services Infrastructure consultancy and design services

1. Page 1/11
Full Name: Amid I. Sahyoun
Nationality Lebanese
Date Of Birth 6th
February 1971
Permanent Address Beirut - Lebanon
Telephone Number +961-3-122625
Email address: amid.sahyoun@yahoo.com
Education : Bachelor of Electrical Engineering (BE)
from: The American University of Beirut
*Placed on the dean's Honor list. *Awarded by the Hariri Foundation for outstanding records
Job Title : PMP #1653492 - Project Management Professional In good standing
PE-Electrical Engineer (Lebanese Engineering Association)
Power Generation, Transmission & Distribution - Consultant Expert
Years of experience : 22
Key Qualifications - Experience in both technical and commercial aspects for Tendering, procurement,
construction, design, and commissioning in the field of power generation and T&D
industry, and associated ancillaries and services.
- Excellent knowledge in building services, both residential and industrial.
- Wide range of expertise in HV transmission / distribution substations, and power
station BOP (balance of Plant), with necessary skills to work in multidiscipline
environment with mechanical, I&C, and Civil engineering.
- Expertise in Protection and Control systems including Automation.
- Excellent technical knowledge in power transformers (GSU, UAT, Aux, Transmission,
distribution)
- HV switchgear: design, sizing, and selection (Air insulated and GIS)
- MV switchgear: design, sizing, and selection (Metal Clad, oil, Vacuum and GIS)
- LV switchgear and MDB, SMDB, MCC, etc.
- Electrical plant auxiliaries: design, sizing, and selection (AC, DC, UPS, etc)
- grounding and lightning protection: design, sizing, and selection
- Development of all type of electrical drawings starting from conceptual design to
detailed engineering like: single line diagrams; Protection and metering diagrams;
logic diagrams; and schematic diagrams.
- Analytical Studies and calculations including Load flow, short circuit, and transient
stability analysis.
- Training and coaching skills, conducted many training sessions in‐house for the
midcareer and fresh engineers on the Protection and control systems, Network
analysis, Transmission and distribution systems, and Power plants systems.
Trainings /Seminars/
Achievements
: - Passed the PMP Prep. Course Credential at CMCS‐PMI
- ETAP certified: attended 5‐days workshop for Load Flow, Short Circuit, Transient
stability and motor acceleration, Protective device coordination, Cable sizing, etc.
Abu Dhabi on March 2012
- GE Mutilin relays training conducted by GE Italy – Sep. 2009
- ABB training on Unigear MV switchgear and Digital Protection relays RE series, in
Berno, Czech republic ‐ Apr‐2010
- Primavera Project Planner Training, Beirut Order of Engineers and Architects – June
2007
- Supervisory Training Course with Bechtel International in Qatar ‐ Summer 2006
- Protection Relays Range of AREVA‐EAI (Alstom) Training in Stafford, UK ‐ Sep. 2000;
and in Lattes, France ‐ Sep 2000
- Design and Construction Projects training in St. Priest, AREVA‐ERT(Alstom) ‐ Sept.
2000
- Training with EDF for EHV/HV/MV safety procedures ‐ Dec.1993
Languages : Arabic (Mother tong)
English (Fluent)
French (Fluent)
Turkish (Acquiring)

2. Page 2/11
SUMMARY OF PROFESSIONAL EXPERIENCE
Period Position Company Type of Work / Project
Oct. 2014 –
Mar2016
Electrical
Engineering
Division
Manager
RELK&P
consultant
Engineers
Electrical Department Design Manager, Consultant in the Domain of
MEP design Services for residential, commercial and medical
facilities.
In addition to the industrial consultancy services (Water treatment,
Power transmission and distribution, power generation, etc)
My activities extend as well to the infrastructure development
and design including but not limited to telecommunication
network, power distribution network (HV, MV, LV) data
centers, medical facilities, media centers, etc)
Nov. 2011
–Sep2011
Electrical
Engineering
Design
Department
Manager
(Section
Head)
BUTEC
Lebanon
Responsible for multi‐projects Design and construction follow up
for multiple projects in M.E.P., Oil&Gas, Power plants, Water
Treatment, Power Transmission and Distribution grids.
Executed Projects:
1‐ Tendering Deir Ammar Power plant 500MW Combined Cycle, Tri Fuel
(HFO, LFO, and Natural Gas)
Role: Project Manager (Tendering Stage)
Client: MOEW (Lebanon)
Main Contractor: Butec/Abener
Consultant : AF consult
Location: North Lebanon
(short description of the responsibilities) : Tendering Leader
 Preparation of the pre‐engineering, and basic design for tendering
 Basic engineering
 Basic tendering BOQ,
 Building pre‐tendering model.
 Preparing the bid packages for tendering
 Securing the commercial aspects of the tender to reflect the market
value at the time of the BID.
 Participating in the pre‐bid clarification, and post bid clarification.
Reviewing and commenting the contract with the client and the sub‐
vendors/subcontractors
Reporting to the management for final decision
2‐ Shah Gas de‐Sulfurization Plant : 24 no 132/11kV substations
Role: Design Manager – EE
Client: Al Hosn Gas, Abu Dhabi
Main Contractor: ENI – Saipem S.p.A
Location: Abou Dhabi – UAE
(short description of the responsibilities) : Responsible for the Design,
Design coordination and construction follow‐up
 Electrical Engineering Manager, Engineering service to Project

3. Page 3/11
 Allocation resources for design follow up
 Conducting design Review meetings with the client and securing
client’s design approval
 Defining equipments or system specification
 Validating and approving vendors or subcontractor drawings
 Assisting Solving construction technical problems
 Procurement support in Vendor offers Technical evaluation
3‐ Taweela Aluminum Extrusion Plant (TALEX) :
Role: Design Manager – EE
Client: SINAAT + TALEX
Main Contractor: BUTEC
Consultant : AECOM
Location: Abou Dhabi – UAE
(short description of the responsibilities) : similar to Shah Gas (item 2)
4‐ Zahle Waste Water Treatment Plant : 56000m3
/day
of treated water
(350,000 PE)
Role: Design Manager – EE
Client: Ministry of Energy and Water/CDR
Main Contractor: Butec + Degremont
Location: Zahle ‐ Lebanon
(short description of the responsibilities) : Responsible for the Design,
Design coordination and construction follow‐up
 Electrical Engineering Manager, Engineering service to Project
 Allocation resources for design follow up
 Conducting design Review meetings with the client and securing
client’s design approval
 Defining equipments or system specification
 Validating and approving vendors or subcontractor drawings
 Assisting Solving construction technical problems
Procurement support in Vendor offers Technical evaluation
5‐ Mostaghanem Waste Water Treatment Plant : 56000m3
/day
of
treated water (350,000 PE)
Role: Design Manager – EE
Client: ONA
Main Contractor: Butec + Stulz‐Panaqua
Location: Mostaghanem – Algeria
(short description of the responsibilities) : identical to Zahle (item 4)
6‐ Meshria Waste Water Treatment Plant : 14000m3
/day
of treated
water (85,000 PE)
Role: Design Manager – EE
Client: Ministry of Energy and Water/CDR
Main Contractor: Butec + COMSA
Location: Zahle ‐ Lebanon

4. Page 4/11
(short description of the responsibilities) : similar to Zahle (item4)
7‐ Djelfa Waste Water Treatment Plant : 24000m3
/day
of treated water
(140,000 PE)
Role: Design Manager – EE
Client: Ministry of Energy and Water/CDR
Main Contractor: Butec + OTV
Location: Zahle ‐ Lebanon
(short description of the responsibilities) : similar to Zahle (item4)
Nov. 2009
–Nov. 2011
Engineering
Manager
SAKR
Holding,
Lebanon
Responsible for multi‐projects Design and construction follow up for
medium voltage power plants up to 33kV and with a power capacity
ranging from 10MW till 100MW with diesel, heavy fuel, and gas fuel.
Managing a team of 8 engineers, and 2 designers (autocad and 3D
models, and reporting directly to the General Manager.
Executed Projects:
1‐ PP1 and PP2 : 62MW+24MW Heavy Fuel fired Power Plant
Role: Design Manager
Client: MOE (Ministry of Electricity Iraq)
Consultant / designer: Warley Parson
Location: Baghdad – Iraq
(short description of the responsibilities) : Responsible for the Design,
Design coordination and construction follow‐up
 Engineering Manager, Engineering service to Project Manager
 Validation of Worley parson design deliverables
 Allocation resources for design follow up
 Conducting design Review meetings with the client and securing
client’s design approval
 Defining equipments or system specification to send for vendors or
subcontractors
 Validating and approving vendors or subcontractor drawings before
releasing for manufacturing/construction
 Assisting Solving construction technical problems
2 ‐ Suleimeniya Gas Power Station extension 3x125.8MW: Black Start Plant
scope
Role: Design Manager
Client: MGI
Main Contractor: ABB ‐AG
Location: Suleimeniya ‐ Kurdistan – Iraq
(short description of the responsibilities) : Responsible for the Design,
Design coordination and construction follow‐up
 Similar to PP1/2 (item 1)
3‐ Dohuk Gas Power Station 4x125.8MW: Black Start Plant scope
Role: Design Manager
Client: MGI

5. Page 5/11
Main Contractor: ABB ‐AG
Location: Dohuk ‐ Kurdistan – Iraq
 Similar to PP1/2 (item 1)
4‐ Karbala Gas Power Station 2x157MW: Emergency Black Start Plant
scope
Role: Design Manager
Client: MOE
Main Contractor: IFC
Consultant: SNC. LAVALIN
Location: Karbala – Iraq
 Similar to PP1/2 (item 1)
5‐ Hilla Gas Power Station 2x157MW: Black Start Plant scope
Role: Design Manager
Client: MOE
Main Contractor: IFC
Consultant: SNC. LAVALIN
Location: Hilla – Iraq
 Similar to PP1/2 (item 1)
May. 2005
– Oct. 2009
Business Unit
Manger
+
Lead Electrical
Engineer
BEMCO
International
Offshore,
Lebanon
Responsible for multi‐projects follow‐up for the business unit scope. The
business unit scope responsibility start at tendering stage through design ,
execution, and extends to commissioning till PAC and even FAC.
Sometimes these responsibilities extend beyond EPC till O&M
The Major covered trades are: HV switchgear (GIS, AIS), MV switchgear
(SF6, vacuum), GCB, Automation (Protection, control: SCS, SCADA),
Transformers (generator Step‐up transformers, unit transformers, auxiliary
transformers, etc). I am responsible for the coordination of the whole
project activities related to the field of my unit specialty, starting from
bidding stage, to engineering, procurement, erection, commissioning, and
O&M.
Executed Projects:
1‐ Qurayya combined Cycle 3800MW Power plant, Dual fired (Fuel Oil,
and Gaz)
Role: Business Unit Manager
Client: SEC (Saudi Electricity Company)
Main Contractor: BEMCO
Consultant/Designer : Sargent and Lundy, Chicago IL.
Location: Dammam – KSA
(short description of the responsibilities) : BUM + Lead Electrical Engineer
 Tendering stage responsibilities related to BU scope, both financial and
technical model building up
 Managing a design project team of 3 electrical Engineers, 1
instrumentation engineer
 Preparation of Engineering Requisition packages for subcontracting or
vendors
 Developing basic design, SLD’s, Protection and metering SLD’s, Control

6. Page 6/11
and protection Philosophy. Specification development and write‐up
 Preparation of load lists and validating Auxiliary plant power
requirements, to secure performance guaranties of the project
 Validating S&L calculations: ETAP modeling, switchgears Sizing,
Transformers Sizing; CT/VT sizing, Protection relays selection,
coordination, and setting, EBSDG sizing, Cable sizing, IPB sizing, etc…
 Building plant model on specialized software of S&L, and slicing
layouts, cable routing, and other discipline activity coordination
(mechanical piping, civil and structural foundations and structures)
 Design Optimization, and applying value engineering.
 Manage and approve engineering deliverables from S&L
 Secure approval from SEC.
 Negotiation with the suppliers of the purchase of equipments before
participating in the final commercial negotiation and placing contracts
and material orders.
 Coordination with 400kV substation contractor for interface (GIS/GIB)
Protection interface and control / communication through SCADA and
DCS interface, interlock scheme interfaces.
 Batteries, battery Chargers, UPS’s sizing and specification write‐up
2‐ PP10 Simple Cycle 3200MW Power plant, dual Fuel (crude Oil, distilled
oil) fired
Role: Business Unit Manager
Client: SEC (Saudi Electricity Company)
Main Contractor: BEMCO
Consultant/Designer : Mega, Cairo‐Egypt
Location: Al Riyadh ‐ KSA
(short description of the responsibilities) : BUM + Lead Electrical Engineer
 Tendering stage responsibilities related to BU scope, both financial and
technical model building up
 Managing a design project team of 3 electrical Engineers, 1
instrumentation engineer
 Preparation of Engineering Requisition packages for subcontracting or
vendors
 Developing basic design, SLD’s, Protection and metering SLD’s, Control
and protection Philosophy. Specification development and write‐up
 Batteries, battery Chargers, UPS’s sizing and specification
 Preparation of load lists and validating Auxiliary plant power
requirements, to secure performance guaranties of the project
 Validating Mega calculations: ETAP modeling, switchgears Sizing,
Transformers Sizing; CT/VT sizing, Protection relays selection,
coordination, and setting, EBSDG sizing, Cable sizing, IPB sizing, etc…
 Design Optimization, and applying value engineering.
 Manage and approve engineering deliverables from Mega
 Secure approval from SEC.
 Negotiation with the suppliers of the purchase of equipments before
participating in the final commercial negotiation and placing contracts
and material orders.
 Coordination with 132kV substations contractor for interface (GIS /
XLPE cables) Protection interface and control / communication through
SCADA and DCS interface, interlock scheme interfaces.

7. Page 7/11
3‐ Fujeira IWPP 225MW cogeneration plant, Dual Fuel (diesel Oil, and gas)
Role: Business Unit Manager
Client: ADWEA/Sembcorp
Main Contractor: Iberinco / BEMCO
Consultant/Designer : Iberdola – Madrid Spain
Location: Fujeira ‐ UAE
(short description of the responsibilities) : BUM + Lead Electrical Engineer
 Tendering stage responsibilities related to BU scope, both financial and
technical model building up
 Managing a design project team of 3 electrical Engineers
 Preparation of Engineering Requisition packages for subcontracting or
vendors
 Developing basic design, SLD’s, Protection and metering SLD’s, Control
and protection Philosophy. Specification development and write‐up
 Preparation of load lists and validating Auxiliary plant power
requirements, to secure performance guaranties of the project
 Batteries, battery Chargers, UPS’s sizing and specification write‐up
 Validating designer calculations: ETAP modeling, switchgears Sizing,
Transformers Sizing; CT/VT sizing, Protection relays selection,
coordination, and setting, EBSDG sizing, Cable sizing, IPB sizing, etc…
 Design Optimization, and applying value engineering.
 Manage and approve engineering deliverables from Iberdrola
 Negotiation with the suppliers of the purchase of equipments before
participating in the final commercial negotiation and placing contracts
and material orders.
 Coordination with 400kV substation contractor for interface (GIS/GIB)
Protection interface and control / communication through SCADA and
DCS interface, interlock scheme interfaces
4‐ NDIA (New Doha international Airport) – CP13: Utility and power (2nb x
substations 66/11kV, Central Utility plants, 20MW emergency power,
120nb x 11/0.4kVkV RMU’s, waste water treatment plant, water and fire
fighting plant...)
Client: NDIA
Main Contractor: Bechtel
Consultant/Designer : Warley Parson
Independent Checker: Parsons International
Location: Doha – Qatar
(short description of the responsibilities) : Lead Electrical Engineer,
Acting project manager (seconded from Beirut Office to Doha Office)
 Managing a design project team of 2 electrical Engineers, 2 mechanical
engineers, 1 instrumentation engineer, and 1 civil engineer
 Coordination of design activities between Designer, Independent
checker, and Main contractor other packages.
 Preparation of Engineering Requisition packages for subcontracting or
vendors
 Batteries, battery Chargers, UPS’s sizing and specification write‐up
 Developing basic design, SLD’s, Protection and metering SLD’s, Control

8. Page 8/11
and protection Philosophy. Specification development and write‐up
 Validating WP calculations: ETAP modeling, switchgears Sizing,
Transformers Sizing; CT/VT sizing, Protection relays selection,
coordination, and setting, EBSDG sizing, Cable sizing, etc…
 Design Optimization, and applying value engineering.
 Manage and approve engineering deliverables design team
 Secure approval from Bechtel
 Negotiation with the suppliers of the purchase of equipments before
participating in the final commercial negotiation and placing contracts
and material orders.
 Coordination with KAHRAMAA (Qatar Power Utility) for the
substations interfaces and integration with Qatar Transmission
Network Protection interface and control / communication through
SCADA
5‐ Aweer phase2 400MW generation plant, Dual Fuel (diesel Oil, and gas)
Role: Lead Electrical Engineer
Client: DWEA
Main Contractor: BEMCO/Siemens
Consultant : Mott MacDonald
Designer: Fichtner
Location: Dubai‐ UAE
(short description of the responsibilities) : Lead Electrical Engineer
 Managing a design project team of 3 electrical Engineers
 Preparation of Engineering Requisition packages for subcontracting or
vendors
 Developing basic design, SLD’s, Protection and metering SLD’s, Control
and protection Philosophy. Specification development and write‐up
 Preparation of load lists and validating Auxiliary plant power
requirements, to secure performance guaranties of the project
 Validating designer calculations: ETAP modeling, switchgears Sizing,
Transformers Sizing; CT/VT sizing, Protection relays selection,
coordination, and setting, EBSDG sizing, Cable sizing, IPB sizing, etc…
 Design Optimization, and applying value engineering.
 Manage and approve engineering deliverables from Fichtner
 Negotiation with the suppliers of the purchase of equipments before
participating in the final commercial negotiation and placing contracts
and material orders.
 Coordination with 400kV substation contractor for interface (GIS/XLPE
cables) Protection interface and control / communication through
SCADA and DCS interface, interlock scheme interfaces. Batteries,
battery Chargers, UPS’s sizing and specification write‐up
5‐ Tendering Mesaid IWPP 2000MW cogeneration plant, Dual Fuel (diesel
Oil, and gas)
Role: Lead Electrical Engineer
Client: KAHRAMAA
Main Contractor: BEMCO/Iberinco
Consultant : Fichtner
Location: Mesaid ‐ Qatar

9. Page 9/11
(short description of the responsibilities) : Lead Electrical Engineer
 Preparation of the pre‐engineering, and basic design for tendering
 Basic engineering
 Basic tendering BOQ,
 Building pre‐tendering model.
 Preparing the bid packages for tendering
 Securing the commercial aspects of the tender to reflect the market
value at the time of the BID.
 Participating in the pre‐bid clarification, and post bid clarification.
Reviewing and commenting the contract with the client and the sub‐
vendors/subcontractors
 Reporting to the management for final decision.
6‐ Tendering PP11 IPP 1750MW generation plant, Dual Fuel (diesel Oil,
Crude oil)
Role: Lead Electrical Engineer
Client: SEC
Main Contractor: BEMCO/Alstom power
Consultant : PB power
Location: Riyadh ‐ KSA
(short description of the responsibilities) : Lead Electrical Engineer
 Preparation of the pre‐engineering, and basic design for tendering
 Basic engineering
 Basic tendering BOQ,
 Building pre‐tendering model.
 Preparing the bid packages for tendering
 Securing the commercial aspects of the tender to reflect the market
value at the time of the BID.
 Participating in the pre‐bid clarification, and post bid clarification.
Reviewing and commenting the contract with the client and the sub‐
vendors/subcontractors
 Reporting to the management for final decision.
May. 1996
– Apr. 2005
Field Service
Manager
+
QA/QC
Manager
Areva
T&D
(Alstom
T&D)
Now
renamed
as: Alstom
Grid
Field Service Manager: Job activity is commissioning and maintenance of
MV, HV, and EHV substations (300KV/132/33/11KV). I manage a team of
60 persons (engineers, technicians and helpers)
Planning and Execution of all tests/checking related to HV / MV switchgear,
protective relays, control system in S/S, power transformers and battery
chargers.
Technical and commercial Coordination with the client
Quality Insurance Manager: Job activity is implementation of a quality
insurance plan for S/S maintenance and commissioning projects.
Safety procedures: application and follow-up
Development of testing procedures (MV switchgear, Protection
and control systems, power transformers, battery and battery Chargers)
Testing Equipment: calibration, and purchasing
Substation Design Coordination and management: Job activity is to
follow the different parts of new projects, mostly the substation upgrade
projects in Kuwait, and the follow up of the necessary design approval with
the client.

10. Page 10/11
Executed Projects:
1- Petrochemical Complex “A” 132/11kV substation (33xGIS bays,
8x30MVA, 132.11kV transformers, 50xMetal Clad 11kV switchgear)
(short description of the responsibilities) : Construction and Commissioning
Lead Electrical Engineer
 Development of Shop drawings
 Validation of Relay setting calculation
 Relay setting implementation
 Relay testing
 battery Chargers, UPS’s capacity test and load test
 Control System loop checks
 Control system interface with SCADA/RTU
 Transformer tests: Polarity, Resistance, Vector Group, Ratio)
 GIS testing (dynamic tests, SF6 quality, Partial Discharge, HV test,
Circuit breaker dynamic tests, primary and secondary injection tests, …)
 11kV metal Clad switchgear tests (Insulation test, HV tests, CB dynamic
tests, Primary and secondary injection tests, circuit breaker dynamic
tests, …)
 Energize and hand over to utility
2- Omeriya “W” 300/132/11kV substation
(short description of the responsibilities) : Construction and Commissioning
Lead Electrical Engineer
 Development of Shop drawings
 Validation of Relay setting calculation
 Relay setting implementation
 Relay testing
 Control System loop checks
 Control system interface with SCADA/RTU
 Transformer tests: Polarity, Resistance, Vector Group, Ratio)
 GIS testing (dynamic tests, SF6 quality, Partial Discharge, HV test,
Circuit breaker dynamic tests, primary and secondary injection tests, …)
 11kV metal Clad switchgear tests (Insulation test, HV tests, CB dynamic
tests, Primary and secondary injection tests, circuit breaker dynamic
tests, …)
 battery Chargers, UPS’s capacity test and load test
 Energize and hand over to utility
3- Shuaiba “M” 33/11kV substation
(short description of the responsibilities) : Construction and Commissioning
Lead Protection Engineer
 Development of Shop drawings
 Validation of Relay setting calculation
 Relay setting implementation

11. Page 11/11
 Relay testing
 Control System loop checks
 Control system interface with SCADA/RTU
 battery Chargers, UPS’s capacity test and load test
 Energize and hand over to utility
4- 165 x numbers 132/11kV + 3 x number 300/132/11kV substations
maintenance (Level 1/2/3 maintenance)
(short description of the responsibilities) : Field Service Manager
 Relay secondary injection test
 Relay testing
 Control system simulation with SCADA/RTU
 Transformer tests: Oil test, insulation test, mechanical protection test
 GIS testing (dynamic tests, SF6 quality, Partial Discharge, HV test,
Circuit breaker dynamic tests, primary and secondary injection tests, …)
 11kV metal Clad switchgear tests (Insulation test, HV tests, CB dynamic
tests, Primary and secondary injection tests, circuit breaker dynamic
tests, …)
 battery Chargers, UPS’s load test, and maintenance
Dec. 1993 –
Apr. 1996
Design Engineer
+
Commissioning
Engineer
MATELEC
SAL
(Lebanon)
MELEC S.A
(France)
MELEC SAL
(Lebanon)
Worked In the reconstruction project of electrical sector in Lebanon. I can
outline the major activities done in this period as follows:
 Rehabilitation of JAMHOUR and BSALIM 245 / 66 / 15 kV
substations project 1993. The scope of work was as follow:
i. HV Insulation Test
ii.Testing and Commissioning of: Protection, Metering,
and Control Panels.
 Technical reporting and Damage assessment done for Lebanese
power Network by CDR (Conseil de Reconstruction).
 Design Engineer in MATELEC‐design department. My scope of
work was the design of the New and old rewired low voltage
control circuits of substation equipments.
 Preparation for a training program for EDL as part of EDL human
resources rehabilitation. The program consisted of:
i. Introduction to power network and protection concepts
ii.Power network Analysis: Load flow, Fault Level,
Transient Stability, Substation Design
 Working in the “OPERATION TRIPLE TARIFF” with EDF/EDL, this
consists of the rehabilitation of the industrial MV substation
(Clientelles de Moyenne Tension), plus installation of digital triple
tariff meters. This Project was carried out By Melec SAL, under
EDF supervision.
 Reconstruction of Jamhour and Bsalim Project April 1996, Under
an Emergency project.