ezone is a technical center that provides training programs in electronics, PCB design, microcontrollers, embedded systems, robotics, VLSI, MATLAB, and other tools. The training programs are designed to fill the gap between engineering education and industry requirements. ezone follows a "learning by doing" approach, and many past students have been placed at companies like HCL, Flextronics, Foxconn, and HTC. ezone has signed MoUs for technical support with companies in Chennai and Bangalore. It provides regular courses in basics of electronics, PCB design, embedded systems, robotics, internships, and VLSI, as well as special courses in electronics, IT, and other topics. e

1. FOREWORD
ezone is a technical center conducts training programmes on Basics of electronics, PCB Designing and
Manufacturing Microcontrollers, Embedded systems, RTOS, Robotics , VLSI & Tools ,MATLAB & Tools.
The training programmes are designed in such way that it fills the gap between Engineering
Undergraduates and the companies basic requirement standards as we follow “Learning by Doing
Approach” which proved many of our students got placed in HCL, Flextronics, Foxconn, HTC, ALCATEL
etc.
These programmes suits well for Engineering Students ,freshers & Working Professionals which are
carefully designed by Professors, Industrial experts had an experience more than 20 years.
Signed MoU For Technical Supports: Bois Technologies, Chennai & Tenet Technologies in Bangalore.
Clients : Arja Powertronix, IEEE Pro, Ubisense Technologies , Asqur Embedded Solutions, Abe
Technologies.
About ezone Technical Team:
Our Engineering Services team contains a proper mixture of Latest technical Expertised people as well as
Industrial Experts who contributes for Research and Development Activities of ezone and its services.
All of Our Faculties are post graduates in VLSI, Embedded Systems, Image Processing published their
technical innovations into Conferences and working on Implementing them for End user Satisfaction.
We have tie ups with people from Corporate sectors for enhancing students knowledge on IT Industry.
CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040

2. Regular Courses:
I.
II.
III.
IV.
V.
Basics of electronics , PCB Designing (Mini Project Training)
Embedded Systems Design (8051, PIC, ARM, ARDUINO)(Major Project Training for
Undergradutes/Freshers)
Robotics (for Undergradutes/ Freshers/ Experiences Professionals)
Internship and In-plant Training for 20 hours
VLSI - STERLING Tool, RTOS, MEMS, FPGA (for PostGraduates/ Freshers/ Experienced
Professionals)
Special Courses:
In Electronics:
MEMS, OPNET, NS2, VLSI, Matlab, VHDL .
In IT:
Oracle, Android & Enterprise Mobility, .Net
CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040

3. MINI PROJECT TRAINING
Objective: Basics of Electronics course aims at making students understand on how a simple board can
be converted into a electronic appliance through the means of understanding basic blocks of electronics,
different electronics components and designing
Features:
a. Science students & Engineering students who like to start the basic designing of electronic
circuitries can undergo this course.
b. Here students begin learning through practical exposure which is the foremost requirements for
companies and industries.
c. Learns the complete process cycle from Basic Understanding of Components
d. Student can start doing their own Undergraduate Mini projects with this Course level knowledge.
Course Content:








Overview of Basic Energy Concepts and Material Science
Basics on Active and Passive Components, Inverters, Rectifiers, Relays, Various types of Cables ,
Connectors, Diodes, LED, IC-741, IC-555 timer, Filters
Working with AC Circuits, DC Circuits, Semiconductor Devices, Power Electronics
Working with Multivibrators, Oscillators, IR Sensor, Gas Sensor, Load Sensor, Pressure Sensor,
Ultrasonic Sensor etc.
Working with LED Displays, Seven Segment Displays, LCD Display
Working with Buzzer, Gear Motor, Stepper Motor, Relay tripping Boards
Soldering Techniques and Basics of PCB
Constructing 5 Practical Real time projects
1.) Construction of Water Level Controller for Overhead water tanks in home
2.) Design of a Soil Moisture testing and Cultivating Robot
3.) Design of a Traffic Signal Controller
4.) IR Sensor Based Parking Timer
5.) Automatic Braking System Using Ultrasonic Sensor
Duration: 5 Days (40 Hours)
Fees: Rs.4000/ Head
CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040

4. PCB DESIGNING
Objective:
In PCB Designing course students are encouraged to design the layout of an electronic circuit, with
various active and passive components.
Features:
a. Students learn about Designing, Simulation processes such as Routing, GERBER File Generations
and Components Soldering.
b. Provide the exposure on different kinds of PCB Designing and their practical requirements in
Industry.
c. Exposed to testing of Fabricated PCBs and Detecting faults on Solder joints which could be quite
helpful for the students while they are trying to get in Electronics PCB Layout and testing
Industries.
Course Content:










PCB Layouts for electronic circuits using Micro controller, IC, Transistors, Diodes, Active and
Passive components, Switches and connectors.
Schematic Designing
Design Checking
Placing and Routing of components
Higher Level Details on Interference, Heat dissipation on PCBs
Manual Layout using Inch Graph and Software Layout
Generation of Net List, Part List, Pin List
Soldering and technical preventive measures
Testing of Fabricated PCB
Working on 3 Real time projects through PCB
1.) Designing of PCB Board using Manual Layout for Water Level Controller Project
2.) Designing of PCB Board using Software Layout for Water Level Controller Project
3.) Construction of a Robotic MotherBoard through Placing, Routing, Layout, Soldering.
Duration: 2 Days
Fees: Rs.750 /Head
CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040

5. ROBOTICS
Objective : Robotics is a branch of artificial intelligence which are now widely used in factories to
perform high-precision jobs such as welding and riveting and works which are dangerous for humans.
This course helps students to learn about Dynamics, Kinematics, Robotic Mechanisms, Robotic Electronic
building blocks, Intelligent controlling Logics, Artificial Intelligence etc.
Features:
a. Knowledge on Embedded Robotics, Fire sensing, Gas sensing, Track Follower, Pick & Place, To
and Fro Robots & Wireless networking
b. Students are encouraged to try the basics of electronics, PCB Designing and Embedded Systems
Designs into the Robot with Artificial intelligence
c. Certifications are provided only after implementation of a Real time Robotic project
Course Content:











1.)
2.)
3.)
Introduction to Robotics
Mechanical Energies and Dynamic Forces
Various types of Motors
Normal and Self-sustainable Batteries and Power supplies of a Robot
Required electronic components (For Selected types of Robots only)
Soldering on PCB
Microcontroller based Robots with Display
Interfacing Sensors and Beepers
Interfacing Servo Motor
Directions and Braking Mechanisms
Construction of Practical Real time Robots
Construction of a Tanker Robot for Military Applications
Construction of Security Robot for Remote Monitoring
Crop Cultivation through Moisture Sensing Robot
Duration: 3 days
Fees: Rs .2747 / Batch of 3 members
CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040

6. MATLAB
Objective : It just came as binary 0s and 1s but now it had made every Signal Processing Applications to
rely on it. With this tool it finds application in Images, Signal Processing, Fuzzy Logic, Neural Networks,
DSP etc.
Features:



Courses handled by Industrial Experts and Experienced Professionals with live exposure.
Clear and Practical Handson Based Concepts explanation
Video Lectures are also provided for further reference
IMAGE PROCESSING
Course Content:















Working with Matlab Software
Desktop tools and development Environment
Matlab operators, Elementary operators, Arrays and Manipulation
Plotting, Annotating
Printing and Exporting
Mesh plots, Data Analysis and Visualization
Basic Programming , GUI, Fuzzy Logic
Error Handling
Basic operations on images such as Reading, writing, Display
Spatial transformation, Analysis and enhancement
Morphological and Edge detection
Linear Filtering
Image Transformation and Image Acquisition
Watermarking and Cryptography
Application of ROCs and Edge Detection through Kernels
Duration: 2 days .
Fees: Rs. 500 per student
CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040

7. SIMULINK
Objective:
The objective of this course is to get familiar with Basic Building blocks, Electrical system Design
Features:



Courses handled by Industrial Experts and Experienced Professionals with live exposure.
Clear and Practical Handson Based Concepts explanation
Video Lectures are also provided for further reference
Course Content:












introduction to MATLAB SIMULINK
Hands on with Basic Building Blocks
Introduction to Electrical system
Design of Basic Electrical Circuit
Design of Basic circuits using SCR,MOSFETS,IGBT
Design of various Rectifiers & converters
Design of chopper circuit
Pulse Width Modulation signal generation
Design of Buck Converter
Design of Boost Converter
Design of Multilevel Inverter circuit
Ideas on SAG/SWELL Circuits
Duration: 2 days .
Fees: Rs. 500 per student
CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040

8. Ezone Facilities and Requirements
Support from eZone end for Courses:
a) Trainer
b) Certification
c) Software required for the course
d) Tools and equipments only for training
e) Participants will be provided with reference material ,software in a CD.
f) Development tools PICKIT2/ICD2 and PIC development boards for the training.
What we expect from Institution/ Industry:
a) One class room big enough to accommodate the students.
b) LAB for conducting practical training.
c) One Laptop/PC between two students. PCs should have windows XP installed as OS and should be
networked.
d) Multimedia projectors, projection screen/writing board.
CORPORATE ADDRESS:C-85,10TH CROSS WEST ,THILLAINAGAR,TRICHY-620018 PH:0431-4021671,9171059040