Experience in Hydro mechanical works and responsible for Preparation of specifications, drawings, review & approval of vendors design & drawings, Preparation of DPR, Preparation of Technical Specification, Preparation of Design, Drawing, Manufacturing drawing, finalization of Bill of Material; Review & checking of design & drawings of HM components; Weight estimation of gate & hoist capacity calculations; HM Chapter for DPR, Weight estimation & DPR drawings; Preparation of Blockout for 2nd stage & 1st stage embedded parts; Coordination with Civil department for all the HM components.

1. CV: Amit Kala
CURRICULUM VITAE
Amit Kala
E-mail : amitkalaskit@gmail.com
Phone : +919560950440
Nationality : Indian
Work Experience : 7 Years
Career Objective
Add values to the organizational objectives through sincere and proactive contribution with utmost
integrity while achieving the high standards of professionalism and performance.
Employment Record
SMEC India Pvt. Ltd. (From 2010 to Present)
Professional Engineer
M.V. Engg. Works Pvt. Ltd. (From 2009 to 2010)
Graduate Engineer Trainee
Job Responsibility
· Responsible for preparation of specifications, drawings, review & approval of vendors design &
drawings of hydro mechanical works
· Preparation of detailed report for ongoing & upcoming project.
· Preparation of technical specification.
· Preparation of bid evaluation.
· Preparation of design, drawing, manufacturing drawing, finalization of bill of material
· Review of quality assurance plan for different HM- components.
· Weight estimation of gate & hoist capacity calculations.
· Preparation of blockout for 2nd stage & 1st stage embedded parts.
· Coordination with civil department for DPR of all the HM components.
· Inspection of HM components.
Projects
International
1. Moragahakanda Reservoir Headworks Project HEP (25MW), Srilanka
· Preliminary Design calculation & Drawings of following HM-components for DPR.
o Diversion Gate - 6.0m x 6.0m
o Spillway Radial Gate - 9.7m x 11.0m
o Spillway Stoplog - 9.7m x 11.0m
o Intake Trashrack - 5.0m x 10.0m
o Intake Service Gate - 2.8m x 2.8m
o Intake Emergency Gate - 2.8m x 2.8m
o Irrigation Bypass Gate - 2.0m x 2.0m
o Irrigation Bypass Emergency Gate - 1.90m x 1.90m
o Irrigation Bypass Radial Gate - 1.80m x 1.80m
o Draft Tube Gate- 5.6m x 2.0m
· PTS (Particular Technical Specification) & GTS (General Technical Specification) of HM-Works
2. Nikacchu HEP (118 MW), Bhutan
· Preparation of HM-Bid evaluation
· Review of Hydro mechanical designs and drawings

2. CV: Amit Kala
3. Kuri-1 HEP, Bhutan
· Preliminary Design calculation & Drawings of HM-components for DPR.
· PTS (Particular Technical Specification) & GTS (General Technical Specification) of HM-Works
India
1. Water Storage Scheme for Annupur Thermal Power Project (2520 MW), MP
· Planning and Basic Design of radial gates, vertical gates, Trashrack, stoplogs and Gantry Crane
for Tender Purpose.
· BOQ for HM-Works
· Technical Specifications and Particular Specification for HM-Works.
· Review of Design and Drawings for following HM- components.
o Radial Gate of size 8.5m x 9.0m.
o Hydraulic Hoist of 45 Ton capacity
o Stoplog for Radial Gate of size 8.5m x 10.2m
o Gantry Crane of 20Ton capacity
o Intake Gate of size 3.125m x 2.00m
2. Thanaplaun HEP (105MW), HP
· Preliminary Design calculation & Drawings of following HM-components for DPR.
o Diversion Tunnel Gate - 11.00m x 11.0m
o Rope drum Hoist for Diversion Tunnel Gate - 110T capacity
o Spillway Stoplog -11.00m x 21.468m
o Spillway gantry Crane - 55T capacity
o Intake Trashrack - 5.00m x 12.0m
o Intake Service Gate - 7.30m x 7.30m & 6.6m x 6.6m
o Intake Emergency Gate - 7.30m x 7.30m & 6.6m x 6.6m
o Rope drum Hoist for Intake Service & Emergency gate - 105T capacity
o Draft Tube Gate- 5.3m x 5.8m & 3.2m x 3.5m
o Rope drum Hoist for Draft Tube Gate - 45 T capacity
· Cost estimation for the above mentioned components.
3. Nyukcharong Chu HEP (98MW), Arunachal Pradesh
· Preliminary Design calculation & Drawings of following HM-components for DPR.
o Spillway Radial Gate - 9.2 m x 6.31 m
o Spillway Stoplog - 9.2m x 9.51m
o Intake Trashrack - 2.7m x 7.75m
o Intake Service Gate - 3.5m x 3.5m
o Intake Emergency Gate - 3.5m x 3.5m
o Desilting Chamber Gate - 3.5m x 3.5m
o Silt flushing tunnel Gate - 1.25m x 1.25m
o Surge Shaft gate - 3.7m x 3.7m
o Draft Tube Gate- 4.0m x 2.6m
o Tail Race Gate - 4.5m x 4.5m
· Cost estimation for the above mentioned components.
4. Kameng HEP (4 x 150 MW), AP
· Review of Design and Drawings for Intake Service Gate, Intake Emergency Gate, Construction
Sluice Gate, and Draft tube Gate.
· Review of Design and Drawing of Hoist arrangement for all HM Gates.
· Detail design of Tenga Dam Drop shaft gate and Intake gate with their hoisting components (i.e. -
Rope drum Hoist)
· Developed detailed fabrication drawings for Tenga Dam Drop shaft gate, Intake gate and Rope
drum hoist (Mechanical and Structural components)

3. CV: Amit Kala
5. Dhaulasidh HEP (2 x 33 MW), HP
· Planning and Preliminary Design of Radial Gates, Vertical Gates, Gantry Crane and rope drum
hoist for tender purpose.
· BOQ of HM-Work.
· Technical Specifications and Particular of HM-Works.
6. Sirkari Bhyol Rupsiabagar HEP, HP
· Preliminary Design calculation & Drawings of HM-components for DPR.
· DPR preparation.
7. Shahpur Kandi HEP, Punjab
· Coordination with Civil department for preparing construction drawings of all the HM components.
8. Lower Kalnai HEP (48 MW) & Pakal Dul HEP (1000 MW), J & K
· Review of DPR Drawings for HM-Works Pre Bid Engineering.
· Preparation of BOQ.
9. Parnai HEP (37.5 MW), J & K
· Review of DPR Drawings for HM-Works Pre Bid Engineering
· Preparation of BOQ.
10. Nafra HEP (2 x 60 MW) & Panan HEP (4 x 75 MW), AP
· Weight & Cost estimation for HM-Works
· Preparation of BOQ.
11. Triveni Mahadev HEP (78 MW), HP
· Preliminary Design & Drawings for HM-Works
· Weight & Cost estimation of HM-Works
Software
· MS-Office
· AutoCAD
· Ansys Workbench
· Solid works
Education
First Class B.E. (Mechanical) from Rajasthan University - 2009
Training
Drive Shaft Assembly
GKN Drive Line India Ltd, Dharuhera, Haryana
References
G.D. Ray, Retd. Deputy Director CWC, +91-9811654320; D.K. Mehta, Chief Engineer CWC, +91-
9868135584; S.R Das, Retd. Director CWC, +919266408974
Declaration
I hereby declare that the above statements made by me are true to the best of my knowledge and
belief.
Place: Gurgaon (AMIT KALA)