1. Ahmed Mohammed Abbas Mahran
Elbahr st., Eltaramsa, Qena, Egypt
E-mail: petromahran@yahoo.com
(+2) 01115512308 | (+966533687828) |+966564303621 (Mobile)
OBJECTIVE
Having an opportunity in your company in order to obtain an experience, and try to
add a value in the field of petroleum engineering.
EDUCATION
B.SC. in Petroleum Engineering – Cairo university
Grade : Graduation project grade (Excellent),and cumulative grade
(Good)
Graduation project is (Gas condensate reservoirs from K.P.C.)
Date of Graduation: July, 2008
WORK EXPERIENCES
1. MERLON worked as Drilling and Work over supervisor (September 08 –August 2012)
Merlon International Company which is American oil and gas E & P company
actively exploring for oil and gas in the Western Desert of Egypt and the Gulf
Coast of Texas. "Note: Working one week as drilling engineer in Cairo office and
Two weeks as Drilling supervisor at rig site every month"
2. Baker Hughes worked as Directional Drilling Engineer (August 2012 – Mar 2014).
3. Halliburton Saudi Arabia worked as Directional Drilling Engineer (Mar 2014 –
August 2014 )
4. Aramco Saudi Arabia worked as Drilling Supervisor (August 2014 -Current )
Ahmed Mohammed Abbas Page 1
2. Duties and Job Responsibilities:
1. For Drilling Engineer in Head Office:
Provide well programs Authorization For Expenditures ( AFE),
Leads the Well Operations Team in developing specific well plans.
Active participation and documentation of Team meetings
Takes an active role in managing working interest partners during the planning and
execution phase of the project
Identifies and evaluates appropriate offset wells. Leads internal well design reviews
and risk assessments for assigned wells
Develops well designs, cost estimates and confirms pore pressure/fracture gradient
predictions
Reviews and approves hazard surveys prior to distribution
Writes operational procedures for assigned wells. Documents all well design changes
using MOC process
Provides technical support on daily operations and is the primary contact for field
engineering issues
Provides full time engineering support to assigned drilling rig(s). Monitors daily
morning report, and facilitates data error corrections and coding. Primary
responsibility for well file population and management for assigned wells
Provides internal and external benchmarking and end of well reports. Coordinates
and communicates end of well reviews. Leads the joint review with the Operations
Team
Assures assigned wells are properly permitted. Serves as a primary liaison with
Governmental Regulatory Offices for assi gned wells
Evaluates activities against pre-established goals. Makes recommendations based on
evaluations
Full understanding of, and active participation in, HES Program. Accountable for
knowledge of and compliance with all applicable regulations and Compa ny HES
training requirements and policies
Manages contracts and contractors to continuous improvement via the Contract and
Contractor Management Standard
Ahmed Mohammed Abbas Page 2
3. Responsible for preparing tenders, analyzing vendor response, and administering
assigned contracts
Assists with timely procurement of material, equipment and personnel. Reviews and
approves invoices for accuracy
Provides relief for Drilling Engineering Supervisor and/or Drilling Superintendent
during their absence
Performs rig site supervision as required.
2. For Drilling Rigs as drilling supervisor :
Mange well site organization, well site engineers, drilling contractor, sub-contractors
& service companies
Make all daily & weekly reports ( drilling, cost, mud & safety ),
Supervise all drilling activities like drilling , logging, casing & liner string running &
cementing operations
Trouble shooting drilling problems (shale problem, loss of circulation, sticking),
Well control insurance “IWCF. Certificate supervisor level “
Drill holes with different mud types : Spud, Gel, KCL/ Polymers, GLY/ Drill& Sil/Drill
mud,
Drilling deep wells up to 17,000 ft depth & Temp. up to 280 F.
Perform rig inspections as per check list,
Supervise all killing operations of oil wells,
Evaluate qualitative cement bond logs ( CBL-VDL- USIT ),
Conduct weekly safety meeting, discuss HSE, near miss reports,
Solve all un-expected problems like loss, blow-out& pipe sticking,
Handle all the required materials from ware-house to rig site on time,
Supervise monthly rig safety inspection,
Conduct weekly kick drill stripping, H2S drill & fire drill with crews,
Monitor & optimize drilling parameters :circulation rate, WOB, RPM,
Ahmed Mohammed Abbas Page 3
4. Control well cost: mud additives, rig times, service companies,
Evaluate all drilling bits performance
Fundamental in casing flotation technique.
Cementing Technology
Pore Pressure and Fracture Gradient Technology
Drilling Problem Solving (Lost Returns, Stuck Pipe, Hole Instability)
Well Control
Blowout Prevention Equipment and Testing
Basic Open hole and Cased Hole Logging
Risk Assessment
Fundamental Geology
Fundamental Reservoir Engineering
3-For Work-Over & Completion Rigs:
Work-over rig supervisor land rig,
Contact with service companies & mobilize the required tools,
Work on vertical & deviated wells,
Get all data about offset wells analysis, interpretation and recommendations for next
Wells,
Perform scrapping, casing cleaning operations,
Perform remedial, and squeeze cement jobs,
Perform perforation& re-perforation TCP jobs, balance & under balance (Shut &
pull), (Shut & drop), casing guns & through tubing guns,
Perform ESP running, replacement, downgrading & upgrading,
Run with ESP, Sucker Rod Pumps,
Ahmed Mohammed Abbas Page 4
5. Work on Coiled Tubing operations ( Cleaning & Lifting ),
Perform Hydraulic fracturing & acids jobs,
Conduct hazards analysis, perform safety job analysis & risk assessment,
Follow up daily work-over & completion operation with direct contact with Cairo
office supervisor,
Make Daily, Weekly Work-over, Completion, Cost, & Safety reports,
Report& Define all rig activities to head Cairo office, Monitor rig equipment's while
moving
Supervise all fishing operations on work-over rigs,
Have good experience in various completion configuration, packers, nipples &
valves,
Have good experience in ( replacement, water shut off, bridge plugs ),
Have good experience in setting& releasing ( RTTS, Champ, Straddle & PHL ) Packers.
Have good experience in well head configuration: FMC, W.G, CAMERON.
3. For Directional Drilling Engineer in Baker Hughes & Halliburton:
Provide technical support to clients and crew members at the well site.
Drilled deep water wells using both systems mud motors and rotary steerable system
(Auto-Track Express ,GT and G3) in BG Egypt
Keep abreast of all directional drilling techniques and all surveying methods.
Develop expertise on advanced well planning techniques.
Prepare and deliver end-of-well reports and client's final product delivery report.
Manage inventory and supplies.
Maintain communication with client well site representative, rig crew, and field
support staff.
Ensure all reporting requirements are fulfilled.
Ahmed Mohammed Abbas Page 5
6. Follow up on service quality events and ensure incident reports are closed with
clients.
Train, coach, and mentor less experienced directional drillers.
Thorough knowledge of state-of-the-art drilling and surveying technologies and
practices.
Ability to communicate effectively verbally and in writing with managers, peers, and
clients.
BHA (Bore Hole Assembly) Design and Bit selection
Job Risk Assessments
Tool and personnel planning
Trajectory & Anti -collision monitoring
Survey Quality Control and database management
Drilling optimization support and identifying improvement opportunities
Wellbore Stability for directional Drilling
Drill String Design / Torque and Drag Modeling for Directional wells
Bit Hydraulics
Good understanding of drill string vibrations and mi tigations.
Understanding of key ROP limiters in high deviated wells.
Hole Cleaning and ECD behavior in Directional wells
COURSES ATTAINED
IWCF-Supervisor level, were attained in Randy Smith training Solutions-Egypt
2009 to 2011
IWCF Supervisor level, were attained in O.G.S. -Egypt 2011 to 2013
Ahmed Mohammed Abbas Page 6
7. Drilling Fluids Technology (Water Base and Oil Base) were attained in MI-Swaco
2010
Bits technology , BHI Motor Technology and Di rectional Drilling Principles ,
Collision Avoidance Policy Awareness , Directional Drilling Academy, HSE&S
Observation Process and mud Motor Components at Baker Hughes company
H2S certificate valid
IADC Well control "Well Cap Supervisor level", were attained in M.T.C. -Egypt
2014 to 2016 Valid
Halliburton COMPASS and INSITE Directional drilling soft wares.
LANGUAGE SKILLS
Fluent in Arabic (mother tongue)
Very good speaking, reading, and writing in English
Good reading, and writing in French
COMPUTER SKILLS
Baker Hughes well architect program
Baker Hughes Advantage system program
SLB i-Handbook software
Excellent Knowledge of, Windows Vista, XP, Win Millennium, MS Word 2007, MS
Excel 2007 and MS PowerPoint 2007.
Good Knowledge of Internet Tools.
Have good knowledge of well analysis software
Microsoft® Office ,FORTRAN and ECLIPSE (user)
PERSONAL HILIGHTS
Able to work under pressure
Able to work well with all levels of people
Able to learn new tasks quickly
Ahmed Mohammed Abbas Page 7
8. Active & highly motivated and a team player
Skilled at leading and managing groups
INTERESTS
Computer graphic arts, reading, internet searching, and playing chess .
PERSONAL DATA
Nationality: Egyptian
Date of birth: September, 3, 1983
Gender: Male
Marital status: Single
Military status: Fully exempted.
LINKEDIN PROFILE
Profile on LinkedIn. Connect with me and view my profile. http://lnkd.in/dEZSxez)
Ahmed Mohammed Abbas Page 8