1. CURRICULUM VITAE
Name: Abdelraheim Mohamed Mahmoud Ali Refai
Designation: Engineer I – Structural (Senior Level)
Nationality: Egyptian
Location : UAE Sharjah
abdoo4040@yahoo.com
Date of Birth: 02 October, 1982
Education: 1) B.Sc. in Civil Engineering – Structural, 2004
Ain Shams University, Cairo, Egypt
2) M.Sc. in Civil Engineering – Structural, 2011
Ain Shams University, Cairo, Egypt
Courses: Fatigue analysis, Welding methodology, Pushover
analysis, Structural Integrity Management (SIM),
2009 -2011
Professional Affiliation: 1) Member of Egyptian Syndicate of Engineers, 2004
2) Passed FE examinations of USA and preparing for PE
Professional Affiliation: SAP2000, STAAD PRO, ANSYS, MATHCAD,
AUTOCAD- Microsoft Office
SUMMARY:
Twelve years of experience in structural engineering including six years in the oil and gas
industry at Engineering for Petroleum and Process Industries (ENPPI) in Offshore
Department and Three and half year experience in PETROFAC.
Experience includes structural in-service analyses for green field projects such as in-
place, seismic, spectral fatigue analyses, ship impact analysis and pre-service analyses
such as load-out, transportation, lift, on-bottom analyses of new wellhead jackets and
topsides.
Experience includes performing linear structural analysis and non-linear analysis in the
brown field projects using SACS program and choosing the best mitigated actions for
retrofitting.
Conversant with international codes and standards such as API-RP-2A, AISC, DNV,
NOBLE DENTON, ARAMCO specifications etc.
Onshore experience includes structural analysis and design of reinforced concrete works
such as foundations and superstructures of administration buildings.
Petrofac International Ltd. As Engineer – 1 Senior Staff
May, 2013 onwards Offshore Structural Engineer
[Abdelraheim Mohamed Mahmoud Ali Refai, offshore structure Engineer] Page 1 of 4

2. • Proposals for wellhead jackets and decks located
in 30m water depth at Turkmenistan
• Departmental development works such as
preparation of guidelines and procedures for
various analyses, spreadsheets, etc.
Detailed Engineering for Satah al-Razboot (SARB) offshore oil field :
Responsible for the Riser Platform Jacket and Topsides :-
•Responsibility as senior engineer to prepare all the Platform analyses ( in-place , ship impact ,
Push over analysis , cathodic protection , In-Service Fatigue Analysis ,Load out analysis
,transportation analysis and on Bottom Stability ).
•Prepare all the SACS files for all the different Analyses.
• Mutli -discipline Coordination ( Piping / Electrical /Mechanical )
• Engineering Support for the construction Problems.
•Review the design reports for all the previous analyses.
•Review all the structural drawings for the Platform.
•Review the MTO for the Platform
•Structural design for all the Padeyes,trunnions used in Riser Platform
•Prepare /Review the Miscellaneous design calculations for the Jacket
•Prepare a presentation in LRFD design Methodology adopted by ISO19902
•Prepare an in house spread sheets for Tubular Joint Punching ,Monorails and Plate Dropped
object.
Feed/Detailed Engineering for Galloper offshore Energy Platform in East England :
•Performing the Engineering Actives for Topsides (In-service and Preservice Analysis)
•Performing the Jacket Fatigue Analysis using both deterministic and Spectral Fatigue.
•Perform on Jacket on Bottom Stability.
Detailed Engineering for Borwin 3offshore Energy Platform in Germany :
•Performing Pile Lifting analysis and Stick up length study for Skirt Piles and Main Piles
• Preparing standard calculations for Star Plates using Roark formulas in line with Euro Code
3 requirements and DNV requirements.
Engineering for Petroleum & Processing Industries Company in Egypt (ENPPI)
March, 2006 till May 2013, I get involved in the following Projects :
Feed for North West October Platform
January 2012, March 2013 As Senior Offshore Structural Engineer, performed
• Prepare project specifications, prepare project
assignments, coordination with other disciplines,
review the in-place analysis (the jacket water depth is
64.1 meters and 850 tones (dry weight)), prepare the
seismic analysis as per API code requirement, review
the jacket structural drawings, review the jacket load
out analysis , on-bottom stability and review the
Platform MTO ( jacket and topsides).
Technical Support to BP at Site
October 2012, January 2013 As Senior Offshore Structural Engineer, performed
• Local checks for damaged boat landings, deck plating
and secondary beams, technical support to
construction team, and highlight the critical anomalies
for topsides.
[Abdelraheim Mohamed Mahmoud Ali Refai, offshore structure Engineer] Page 2 of 4

3. July 2011, November 2013 As Senior Offshore structural engineer reviewed the
global structural integrity analyses for the following
platform:
- Morgan 15 (38.3 meters water depth, feed stage)
- Morgan 7 (34.0 meters water depth, Feed stage)
- Morgan 6 (16 meters water depth, Feed and Detailed)
My responsibilities are as follows:
• Prepare the Project design basis, review the in-place
analysis report and ship impact report .
• Prepare the strengthened scheme drawings for the
Proper solution in Morgan 6 Platform.
• Review the in-place and ship impact reports.
• Review the MTO Morgan 6 strengthened scheme.
Development of Denis B development
(Detailed Phase)
January 2011, July 2011 As Offshore Structural Engineer performed
• Review vendor print of 5 equipment packages and
follow up the management team with structural
comments in all related MRQ’S related
• Checking calculations of all lifting accessories (Slings,
shackles….etc.) are supplied with all the equipment
packages with all required certifications and all
spreader bars are tested.
• Prepare the cable tray supports drawings and
equipment fixation drawings at Denis B platform.
Hilal Development Project (Feed Stage)
October 2010, May 2011 As Offshore Structural Engineer performed
• Checking the Deck (600 tons) Structural Drawings
• Review Deck Plot Plans
• Checking the In-Place analysis for Deck
• Checking Deck Pre-service analysis
• Review Deck Pre-service analysis
• Prepare Jacket Pre-service analysis (59 m water depth
)
• Prepare / Design of Jacket Lifting Trunnions
• Performing Earth Quake analysis
• Checking on-Bottom Stability for platform jacket
• Update the fatigue analysis for Jacket nodal joint
• Checking the ship impact analysis
Qatar Global Assessment of Structures
in MM & BH fields (Feed)
March 2009, July 2009 As Offshore structural engineer performed
• Inspection site visits and structure verifications for
the existing offshore platforms in MM and BH Fields
North Idku Development
NIP1 Pplatform (Detailed Stage)
March 2008, December 2010 As Junior Offshore structural engineer performed
[Abdelraheim Mohamed Mahmoud Ali Refai, offshore structure Engineer] Page 3 of 4

4. • Preparing the Deck (600 tons) Structural Drawings
• Review Deck Plot Plans
• Preparing the In-Place analysis for Deck and Jacket
(79 meter water depth , tripod platform and the feed
was done by GENSIS)
• Performing Deck and Jacket MTO
• Performing Earth Quake analysis
• Preparing on-Bottom Stability for platform jacket
• Checking the ship impact analysis
KJO, Khafji Joint Operations (KJO)
January 2008, March 2009 Junior Offshore Structural Engineer
• Perform the in-place analysis and pre-service analysis
for the new flare bridge (90meters long) and its
support platforms ( 35 meters water depth)
GUPCO Rehabilitation Project
(Task Force Project , Detailed)
April2006, January 2008 Junior offshore structural engineer
• Perform the engineering required for new heli-deck
and extensions in Badri Helideck Support Platform at
Badri complex field in Gulf of Suez (60 m water
depth, Reviewed with Bomel’s office).
• Adding new extensions for evacuation Plan at J-10
complex.
ECHEM new administration building (on shore)
March 2006, May 2006 Junior offshore structural engineer
• Preparing SAP2000 models for the buildings.
• Foundation design.
• Steel structures design.
• RC Structure design
• Preparing of MTO.
• Reviewing workshop drawing.
AACE(Prof .Dr. Amr Ali Consulting Engineering Office) upon his specified request
Food Court Building, Vodafone Building at Smart village in 6th
October City
August 2004, March 2006 Junior Structural Engineer, performed
• Preparing SAP2000 model for these buildings.
• Preparing the Foundation design using in-house
sheets.
• Design of reinforced concrete structures using in-
house sheets.
• Preparing reinforced concrete MTO.
• Review workshop drawing.
[Abdelraheim Mohamed Mahmoud Ali Refai, offshore structure Engineer] Page 4 of 4