6. BPC 2015
*** ERGRO *** 1. Longest English word where first three
letters are identical to the last three
2. English word where longest stretch of letters
are identical at beginning and at the end
3. In Dutch ?
4. Any other language
5. Biological relevance ?
Send before 1st of december to
wim.vancriekinge@gmail.com
Longest one wins, if same size first to submit
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28. The reason for “bioinformatics” to exist ?
• empirical finding: if two biological
sequences are sufficiently similar, almost
invariably they have similar biological
functions and will be descended from a
common ancestor.
• (i) function is encoded into sequence,
this means: the sequence provides the
syntax and
• (ii) there is a redundancy in the
encoding, many positions in the
sequence may be changed without
perceptible changes in the function, thus
the semantics of the encoding is robust.
29. Protein Structure
Introduction
Why ?
How do proteins fold ?
Levels of protein structure
0,1,2,3,4
X-ray / NMR
The Protein Database (PDB)
Protein Modeling
Bioinformatics & Proteomics
Weblems
30. • Proteins perform a variety of cellular
tasks in the living cells
• Each protein adopts a particular folding
that determines its function
• The 3D structure of a protein can bring
into close proximity residues that are far
apart in the amino acid sequence
• Catalytic site: Business End of the
molecule
Why protein structure ?
31. Rationale for understanding protein structure and function
Protein sequence
-large numbers of
sequences, including
whole genomes
Protein function
- rational drug design and treatment of disease
- protein and genetic engineering
- build networks to model cellular pathways
- study organismal function and evolution
?
structure determination
structure prediction
homology
rational mutagenesis
biochemical analysis
model studies
Protein structure
- three dimensional
- complicated
- mediates function
32. About the use of protein models (Peitch)
• Structure is preserved under evolution when
sequence is not
– Interpreting the impact of mutations/SNPs and conserved
residues on protein function. Potential link to disease
• Function ?
– Biochemical: the chemical interactions occerring in a protein
– Biological: role within the cell
– Phenotypic: the role in the organism
• Gene Ontology functional classification !
– Priorisation of residues to mutate to determine protein
function
– Providing hints for protein function:Catalytic mechanisms
of enzymes often require key residues to be close
together in 3D space
– (protein-ligand complexes, rational drug design, putative
interaction interfaces)
33. MIS-SENSE MUTATION
e.g. Sickle Cell Anaemia
Cause: defective haemoglobin due to mutation in β-
globin gene
Symptoms: severe anaemia and death in homozygote
34. Normal β-globin - 146 amino acids
val - his - leu - thr - pro - glu - glu - ---------
1 2 3 4 5 6 7
Normal gene (aa 6) Mutant gene
DNA CTC CAC
mRNA GAG GUG
Product Glu Valine
Mutant β-globin
val - his - leu - thr - pro - val - glu - ---------
35. Protein Conformation
• Christian Anfinsen
Studies on reversible denaturation
“Sequence specifies conformation”
• Chaperones and disulfide
interchange enzymes:
involved but not controlling final state, they
provide environment to refold if misfolded
• Structure implies function: The amino
acid sequence encodes the protein’s
structural information
36. • by itself:
– Anfinsen had developed what he called his
"thermodynamic hypothesis" of protein folding to explain
the native conformation of amino acid structures. He
theorized that the native or natural conformation occurs
because this particular shape is thermodynamically the
most stable in the intracellular environment. That is, it
takes this shape as a result of the constraints of the
peptide bonds as modified by the other chemical and
physical properties of the amino acids.
– To test this hypothesis, Anfinsen unfolded the RNase
enzyme under extreme chemical conditions and observed
that the enzyme's amino acid structure refolded
spontaneously back into its original form when he returned
the chemical environment to natural cellular conditions.
– "The native conformation is determined by the totality of
interatomic interactions and hence by the amino acid
sequence, in a given environment."
How does a protein fold ?
37. Protein Structure
Introduction
Why ?
How do proteins fold ?
Levels of protein structure
0,1,2,3,4
X-ray / NMR
The Protein Database (PDB)
Protein Modeling
Bioinformatics & Proteomics
Weblems
38. • Proteins are linear heteropolymers: one or more
polypeptide chains
• Below about 40 residues the term peptide is frequently
used.
• A certain number of residues is necessary to perform a
particular biochemical function, and around 40-50
residues appears to be the lower limit for a functional
domain size.
• Protein sizes range from this lower limit to several
hundred residues in multi-functional proteins.
• Three-dimentional shapes (folds) adopted vary
enormously
• Experimental methods:
– X-ray crystallography
– NMR (nuclear magnetic resonance)
– Electron microscopy
– Ab initio calculations …
The Basics
39. • Zeroth: amino acid composition
(proteomics, %cysteine, %glycine)
Levels of protein structure
40. The basic structure of an a-amino acid is quite simple. R denotes any one of the
20 possible side chains (see table below). We notice that the Ca-atom has 4
different ligands (the H is omitted in the drawing) and is thus chiral. An easy
trick to remember the correct L-form is the CORN-rule: when the Ca-atom is
viewed with the H in front, the residues read "CO-R-N" in a clockwise
direction.
Amino Acid Residues
49. • Secondary
– Local organization of the protein backbone: alpha-
helix, Beta-strand (which assemble into Beta-
sheets) turn and interconnecting loop.
Levels of protein structure
52. • Residues with hydrophobic properties
conserved at i, i+2, i+4 separated by
unconserved or hydrophilic residues
suggest surface beta- strands.
A short run of hydrophobic amino acids
(4 residues) suggests a buried beta-
strand.
Pairs of conserved hydrophobic amino
acids separated by pairs of
unconserved, or hydrophilic residues
suggests an alfa-helix with one face
packing in the protein core. Likewise,
an i, i+3, i+4, i+7 pattern of conserved
hydrophobic residues.
A Practical Approach: Interpretation
56. • Chou, P.Y. and Fasman, G.D. (1974).
Conformational parameters for amino acids in helical, b-
sheet, and random coil regions calculated from proteins.
Biochemistry 13, 211-221.
• Chou, P.Y. and Fasman, G.D. (1974).
Prediction of protein conformation.
Biochemistry 13, 222-245.
Secondary structure prediction:CHOU-FASMAN
57. •Method
•Assigning a set of prediction values to a
residue, based on statistic analysis of 15
proteins
• Applying a simple algorithm to those
numbers
Secondary structure prediction:CHOU-FASMAN
58. Calculation of preference parameters
observed counts
• P = Log --------------------- + 1.0
expected counts
• Preference parameter > 1.0 specific residue has a
preference for the specific secondary structure.
• Preference parameter = 1.0 specific residue does not
have a preference for, nor dislikes the specific secondary
structure.
• Preference parameter < 1.0 specific residue dislikes the
specific secondary structure.
For each of the 20 residues and each secondary structure (a-
helix, b-sheet and b-turn):
Secondary structure prediction:CHOU-FASMAN
60. Applying algorithm
1. Assign parameters to residue.
2. Identify regions where 4 out of 6 residues have P(a)>100: a-helix. Extend
helix in both directions until four contiguous residues have an average
P(a)<100: end of a-helix. If segment is longer than 5 residues and P(a)>P(b):
a-helix.
3. Repeat this procedure to locate all of the helical regions.
4. Identify regions where 3 out of 5 residues have P(b)>100: b-sheet. Extend
sheet in both directions until four contiguous residues have an average
P(b)<100: end of b-sheet. If P(b)>105 and P(b)>P(a): a-helix.
5. Rest: P(a)>P(b) a-helix. P(b)>P(a) b-sheet.
6. To identify a bend at residue number i, calculate the following value:
p(t) = f(i)f(i+1)f(i+2)f(i+3)
If: (1) p(t) > 0.000075; (2) average P(t)>1.00 in the tetrapeptide; and (3)
averages for tetrapeptide obey P(a)<P(t)>P(b): b-turn.
Secondary structure prediction:CHOU-FASMAN
61. Successful method?
19 proteins evaluated:
• Successful in locating 88% of helical and 95% of
b regions
• Correctly predicting 80% of helical and 86% of b-
sheet residues
• Accuracy of predicting the three conformational
states for all residues, helix, b, and coil, is 77%
Chou & Fasman:successful method
After 1974:improvement of preference parameters
Secondary structure prediction:CHOU-FASMAN
62.
63. Sander-Schneider: Evolution of overall structure
• Naturally occurring sequences with more than
20% sequence identity over 80 or more
residues always adopt the same basic
structure (Sander and Schneider 1991)
65. • SCOP:
– Structural Classification of
Proteins
• FSSP:
– Family of Structurally Similar
Proteins
• CATH:
– Class, Architecture, Topology,
Homology
Structural Family Databases
66. Levels of protein structure
• Tertiary
– Packing of secondary structure
elements into a compact spatial unit
– Fold or domain – this is the level to
which structure is currently possible
69. • Protein Dissection into domain
• Conserved Domain Architecture
Retrieval Tool (CDART) uses
information in Pfam and SMART to
assign domains along a sequence
• (automatic when blasting)
Domains
70. • From the analysis of alignment of protein
families
• Conserved sequence features, usually
associate with a specific function
• PROSITE database for protein
“signature” protein (large amount of FP &
FN)
• From aligment of homologous sequences
(PRINTS/PRODOM)
• From Hidden Markov Models (PFAM)
• Meta approach: INTERPRO
Domains
75. The ‘positive inside’ rule
(EMBO J. 5:3021; EJB 174:671,205:1207; FEBS lett. 282:41)
Bacterial IM
In: 16% KR out: 4% KR
Eukaryotic PM
In: 17% KR out: 7% KR
Thylakoid membrane
In: 13% KR out: 5% KR
Mitochondrial IM
In: 10% KR out: 3% KR
76.
77. • Membrane-bound receptors
• A very large number of different domains both to
bind their ligand and to activate G proteins.
• 6 different families
• Transducing messages as photons, organic odorants,
nucleotides, nucleosides, peptides, lipids and proteins.
GPCR Topology
• Pharmaceutically the most important class
• Challenge: Methods to find novel GCPRs in human genome
…
81. Levels of protein structure
• Difficult to predict
• Functional units: Apoptosome,
proteasome
82. Protein Structure
Introduction
Why ?
How do proteins fold ?
Levels of protein structure
0,1,2,3,4
X-ray / NMR
The Protein Database (PDB)
Protein Modeling
Bioinformatics & Proteomics
Weblems
83. • X-ray crystallography is an experimental
technique that exploits the fact that X-rays are
diffracted by crystals.
• X-rays have the proper wavelength (in the
Ångström range, ~10-8 cm) to be scattered by
the electron cloud of an atom of comparable
size.
• Based on the diffraction pattern obtained from
X-ray scattering off the periodic assembly of
molecules or atoms in the crystal, the electron
density can be reconstructed.
• A model is then progressively built into the
experimental electron density, refined against
the data and the result is a quite accurate
molecular structure.
What is X-ray Crystallography
84. • NMR uses protein in solution
– Can look at the dynamic properties of the protein structure
– Can look at the interactions between the protein and ligands,
substrates or other proteins
– Can look at protein folding
– Sample is not damaged in any way
– The maximum size of a protein for NMR structure determination is ~30
kDa.This elliminates ~50% of all proteins
– High solubility is a requirement
• X-ray crystallography uses protein crystals
– No size limit: As long as you can crystallise it
– Solubility requirement is less stringent
– Simple definition of resolution
– Direct calculation from data to electron density and back again
– Crystallisation is the process bottleneck, Binary (all or nothing)
– Phase problem Relies on heavy atom soaks or SeMet incorporation
• Both techniques require large amounts of pure protein and require
expensive equipment!
NMR or Crystallography ?
85. Protein Structure
Introduction
Why ?
How do proteins fold ?
Levels of protein structure
0,1,2,3,4
X-ray / NMR
The Protein Database (PDB)
Protein Modeling
Bioinformatics & Proteomics
Weblems
93. • Demonstration of Protein explorer
• PDB, install Chime
• Search helicase (select structure where
DNA is present)
• Stop spinning, hide water molecules
• Show basic residues, interact with
negatively charged backbone
• RASMOL / Cn3D
Visualizing Structures
94. Protein Structure
Introduction
Why ?
How do proteins fold ?
Levels of protein structure
0,1,2,3,4
X-ray / NMR
The Protein Database (PDB)
Protein Modeling
Bioinformatics & Proteomics
Weblems
97. • Finding a structural homologue
• Blast
–versus PDB database or PSI-
blast (E<0.005)
–Domain coverage at least 60%
• Avoid Gaps
–Choose for few gaps and
reasonable similarity scores
instead of lots of gaps and high
similarity scores
Modeling
98. • Extract “template” sequences and align with query
• Whatch out for missing data (PDB file) and complement with additonal
templates
• Try to get as much information as possible, X/NMR
• Sequence alignment from structure comparson of templates (SSA) can be
different from a simple sequence aligment
• >40% identity, any aligment method is OK
• <40%, checks are essential
– Residue conservation checks in functional regions (patterns/motifs)
– Indels: combine gaps separted by few resides
– Manual editing: Move gaps from secondary elements to loops
– Within loops, move gaps to loop ends, i.e. turnaround point of backbone
• Align templates structurally, extract the corresponding SSA or QTA
(Query/template alignment)
Modeling
99. Input for model building
• Query sequence (the one you want the 3D
model for)
• Template sequences and structures
• Query/Template(s) (structure) sequence
aligment
Modeling
100. • Methods (details on these see paper):
– WHATIF,
– SWISS-MODEL,
– MODELLER,
– ICM,
– 3D-JIGSAW,
– CPH-models,
– SDC1
Modeling
101. • Model evaluation (How good is the prediction,
how much can the algorithm rely/extract on
the provided templates)
– PROCHECK
– WHATIF
– ERRAT
• CASP (Critical Assessment of Structure
Prediction)
– Beste method is manual alignment editing !
Modeling
102. CASP4: overall model accuracy ranging from 1 Å to 6 Å for 50-10% sequence identity
**T112/dhso – 4.9 Å (348 residues; 24%) **T92/yeco – 5.6 Å (104 residues; 12%)
**T128/sodm – 1.0 Å (198 residues; 50%)
**T125/sp18 – 4.4 Å (137 residues; 24%)
**T111/eno – 1.7 Å (430 residues; 51%) **T122/trpa – 2.9 Å (241 residues; 33%)
Comparative modelling at CASP
CASP2
fair
~ 75%
~ 1.0 Å
~ 3.0 Å
CASP3
fair
~75%
~ 1.0 Å
~ 2.5 Å
CASP4
fair
~75%
~ 1.0 Å
~ 2.0 Å
CASP1
poor
~ 50%
~ 3.0 Å
> 5.0 Å
BC
excellent
~ 80%
1.0 Å
2.0 Å
alignment
side chain
short loops
longer loops