This resume is for Joseph Jaiwin Dass applying for the position of Commissioning Supervisor in oil and gas. He has over 16 years of experience in various roles such as Production Operator, Process Operator, Pre-Commissioning and Commissioning Supervisor in India and abroad. He has extensive experience in commissioning and pre-commissioning activities, startup operations, and overseeing plant operations including safety systems. He also has experience in areas such as well testing, pump operations, gas dehydration units, control systems, and utilities.

1. RESUME
Post Applied For : Commissioning Supervisor.
Oil &Gas, Petrochemical,Refinery
Name : JOSEPH JAIWIN DASS. N
Father’s Name : Nelson Rajadurai
Date of Birth : 01.05.1972
Nationality : Indian
Permanent Address : 42.West Street, Kalanthapanai,
Triunelveli Dist,
Tamil Nadu – 627109.
India
Contact No : +919952787886.
E-mail : jaiwinds@yahoo.com
Technical Qualification : D.M.E [DIPLOMA MECHNICAL ENGINEERING]
Passport Details:
Passport Number : L 5685982
Date of Issue : 18.12.2013
Date of Expiry : 17.12.2023
Status : ECNR
Languages Known : English, Hindi, Malayalam, & Tamil
Computer Known : MS Word, MS Excel.
EXPERIENCE : Above 16+ years experience in oil & gas Field.
ABROAD AND INDIA
Period Position Held Organization
June 1996
to
May2001
Production Operator ONGC (Oil and Natural Gas Corporation)
Onshore Oil Field.
July 2001
to
May 2007
Gas Field
Process Operator
ADGAS (Abu Dhabi Gas Company
Offshore Gas Field.
Sep 2007
to
2009 Aug
PreCommissioning,
Commissioning Supervisor
Process Operator
DAELIM-TIJD joint venture (National
Iranian Oil Company) Onshore Gas Field.
Oct 2009
to
PreCommissioning,
(petro chemical)
KBR [Saudi kayan olefins project.]
Saudi Arabi.

2. Mar 2010
May 2010
To
Feb 2011
PreCommissioning,
Commissioning Supervisor
(Petrochemical)
DAELIM-NCP South Plot Project,
(Saudi Polymer)Saudi Arabia. Poly
Ethylene Plant.Saudi Arabia. Onshore
Aug 2011
To
Aug 2013
PreCommissioning,
Commissioning Supervisor
(Petrochemical & Refinery)
DAELIM- SATROP-
(Saudi Aramco Total Refinery &
petrochemical)
(Acid Gas Treatment plant) Jubail Export
Refinery Saudi Arabia. Onshore
Sep 2013
To
Dec 2013
PreCommissioning,
Commissioning Supervisor
( Refinery)
DAELIM- YASREF-
(Yanbu Aramco Sinopec Refinery)
(AcHydrocracker plant) Yanbu Export
Refinery Saudi Arabia. Onshore
Jan 2014
To
Sep 2014
Commissioning Supervisor Jurong Rock Cavern (Underground
&Above Ground) Oil Storage Project,
(Hyundai Engineering&Construction
Ltd.)
Jurong Island, Singapore.
Oct 2014
To
Nov 2015
PMC Supervisor Barzan Onshore Project (Rasgas)
JGC Corporation. Qatar.
Jan 2016
To
Still working
Commissioning Supervisor Petronas LNG Train 9 Project
JGC Corporation. Malaysia.
JOB DESCRIPTION:
PRE COMMISSIONING / COMMISSIONING ACTIVITIES/ OPERATIONS
1. Punch List
2. Loop Check
3. Pressure Test
4. Hydro Test
5. Purging
6. Vessel Test, Entry, Cleaning
7. Water Flushing
8. Line Tracing
9. Rotary Equipments, Function Test
Experience in project, Erection, connection, installation also.

3. COMMISSIONING & PRECOMMISSIONG EXPERIENCE
• Having experience in commissioning and pre-commissioning activities like, Leak and Pressure Test
Perform Witness, Equipment Inspection, Flushing, Chemical, Mechanical Cleaning Perform Witness,
Temporary Screens, Strainers and Blinds Perform Witness, Purging and Inserting Perform Witness,
Drying out Perform Witness, Instrumentation Verification Perform Witness.
• Inspection of equipments and process flow lines meet as per the design before boxing up.
• Inspection of trays and its arrangements, following the system cleaning, pressure test and
commissioned the system.
• Experienced and knowledge in pressure testing (Hydro and Pneumatic) of lines and vessels
• Overseeing all areas of the plant and commissioning new equipment, regularly attend the meeting
regarding the Safety, Environmental and Production targets in all fields as well as trouble shooting.
Sampling and placing of work orders.
• Gas testing, chemical handling, confined space entry and atmospheric monitoring.
• Responsible for the successful commissioning of the three phases and two phase separator, Crude Oil
storage tanks, Boilers.
• Commissioning and operation of actuators, regulators, positioners, control systems, pipes, filters,
relief valves, temperature and PH control, dual stage pressure drop designs, instrument air to gas
conversion skids.
• Changing or Adjusting of choke to regulate flow and to give back pressure to reservoir.
• Observe the annulus pressure build up & Annulus pressure bleeding operations.
• Well activation and Optimization of gas injection wells and well head panel board operation.
• Well equalization in case of SCSSV unable to open because of high shut in pressure and operation of
SSV.
• Pig launching and Pig receiving activities.
• Testing and maintaining the unmanned well head platforms.
• Shut down and normalizing the wells through Pneumatic Control Panel board namely Baker and
Autocone.
• SCSSSV, SSV & Safomatic safety valve operation and Storm choke operation.
• Methanol injection in wells flow lines to prevent Hydrates formation.
• Hand over the wells to Rig and giving ESD connection.
• Making wells ready for Acidisation, Reservoir and Wire line jobs.
STARTUP ACTIVITIES:
• Review of the plant P & ID, PFD equipment data sheet.
• Going through plant specific operation manual standard operating procedure (SOP).
• Checking the construction of piping equipment according to the process flow diagram,
instrumentation diagram clearance & mechanical clearance.
• Preparation of hydro test package, water flushing, air blowing, and nitrogen purging.
• Checking of vessel, column internal inspection.
• Column valve tray plates erecting level, water height down comer clearance, valve free moment &
toper fighting of tray decks.
• Checking FG system, deluge fire water system.
• Making of punch point list rectification of the point in co-ordination with maintenance.
• Inspection equipment in association with inspection personal caring out flushing, blowing, drying,
nitrogen purging steam blowing & chemical cleaning of various pipelines.
• Caring out trails runs of all the rotary equipment.
• Inspecting all the utility and their safe commissioning.
• Caring out leak test with liquid nitrogen of various sections.
• Checking trip setting with DCS.
• Lining up the plant for safe start up.

4. • Commissioning of fire water system, flare system, under ground drains systems, HP/LP fuel gas
system, chemical loading procedure.
SULFUR RECOVERY UNIT
• *Very good knowledge of acid gas K.O.D Pressure maintenance, Sour water Pump operations, Main
blowers (0.8 barg) operations, Fuel gas pressure maintenance, high pressure steam (STH), Low
pressure steam (STL), maintain temp of Reheaters and preheaters, Operations of burner, furnace and
waste heat boiler.Operations of Reactors, especially Super Claus reactor. Operations of condensers,
especially Super Claus Condenser Operations and start up permissive for incinerator burner, LP
condensate and HP condensate handling procedures. Level maintenance of sulfur storage vessel,
Sulfur cooler and degassing system operations, Steam jacketed temp and pressure maintenance. Blow
down system and Blow down pump operations. Maintain boiler feed water level, STL production
(156 Deg C & 5 bar), demister pad usage, Blow down routine check up, Maintain BFW temperature,
Aluminum catalyst, Titanium catalyst, Support balls usage, Degassing( To reduce H2s 300ppm to 10
ppm)
Well Head Operation
 Inspection and operation of Christmas tree and flow line check up for leaks.
 Changing or Adjusting of choke to regulate flow and to give back pressure to reservoir.
 Observe the annulus pressure build up & Annulus pressure bleeding operations.
 Well activation and Optimization of gas injection wells and well head panel board operation.
 Well equalization in case of SCSSV unable to open because of high shut in pressure and operation of
SSV.
 Pig launching and Pig receiving activities.
 Testing and maintaining the unmanned well head platforms.
 Shut down and normalizing the wells through Pneumatic Control Panel board namely Baker and
Autocone.
 SCSSSV, SSV & Safomatic safety valve operation and Storm choke operation.
 Methanol injection in wells flow lines to prevent Hydrates formation.
 Hand over the wells to Rig and giving ESD connection.
 Making wells ready for Acidisation, Reservoir and Wire line jobs.
Well Testing:
 M P F M (multi phase flow meter)(now we are using)
 Production & Test manifold operations – Setting Pressure, Interface level and Level of Test separator.
 Operation involved in changing orifice plate (Daniel junior, senior orifice meter & flange orifice) and
handled chart recorders (Pressure, Temperature & Differential Pressure) namely FoxPro, ITT Burton.
 Operation involved in changing orifice plate (Daniel junior, senior orifice meter & flange orifice) and
handled chart recorders (Pressure, Temperature & Differential Pressure) namely FoxPro, ITT Burton.
 Test separator Pneumatic panel board operations. Find out the Gas Oil ratio and Gas Liquid ratio.
 Calculation of Gas flow through orifice meter as per AGA table.
 Well Actuation & Optimization Actuate the ceased wells due to water loading.
 Setting Gas lift pressure of individual wells to get maximum production.

5. PUMP OPERATION:
Centrifugal & Reciprocating pump open: lion. Start up & shut down operation. Lube pumps operation, oil
level maintenance, vibration check. Maintenance seal check, Cavitations, Suction & Discharge pressure
checkup, Strainer operation coupling. Shaft vibration & Heat checkup, speed setting chemical dose pump
operation, submersible pump operation, trouble shooting, etc
GAS DEHYDRATION UNIT:
Very good working and troubleshooting knowledge with Gas Dehydration Startup & shutdown, Glycol
Pump Operation – TEG inlet scrubber level maintenance-TEG conductor handling –TEG circulation rate
– TEG regeneration system operation – TIC operation –Thyrister panel operation – Flash Drum operation
– Sock filters, Charcoal filter change over operation and normalize – Reflux condenser temperature
control- Rebolier temperature control – Dew point, PH value, Foam maintenance, Stripping gas etc.
GLYCOL REGENERATION
Natural gas is dehydrated to avoid corrosion or pipeline plugging due to ice or hydrate formation. The
traditional way to dehydrate natural gas is by absorption in triethylene glycol (TEG). Normally, the
water is removed from the (rich) glycol by distillation, and then the regenerated glycol is recycled
back to the absorption column. After absorption, soluble gases like CO2 are first released from the
glycol in a flash tank, and then the glycol is heated before it flows to a distillation (regeneration)
column. The regeneration column has a reboiler and a condenser. Regeneration of the glycol by
atmospheric distillation at about 200 C achieves about 1weight% water in regenerated glycol. The
regenerated glycol is pumped back to the absorption column and heat exchanged against the rich
glycol and cooling water
CENTRAL PRODUCTION FACILITY AND TANK FARM:
Receiving Crude from different Gathering Station, Gas Boot and Free Water Knockout tank, Dehydration
tank, desalination Tank, produced water tank, skimmer tank, and storage tank operations, emulsion
treatment by electrostatic heater treater, emulsifier’s injection pumps, and injection rate
calculations.Desalting crude through electric desalters, crude transfer pumps, LACT (Lest Automotive
Custody Transfer) – unit water injection pumps. LACT Meter proving, shipping Pumps, Trouble
Shooting as per cause and effect Logics, Operation of Gas Turbines for Generator, Compressors. Pump
sand Fire Water Pumps PIG launching and Receiving, Preparation of production reports, well-test data
entry.SCADA operations. Well aware of plant safety equipments, Emergency procedures, etc. Conversant
in Handling Crude Stabilization unit, Vacuum Separator, Vacuum Compressors.Also successfully
operated Central Production Facility Capacity of 1, 50, 000 bbls/day.
CONTROL SYSTEM:
Handling of all types of control system Pneumatic controls, SCADA systems, distribute control system
(DCS). All control valves like LCV, ILCV, FCV,TCV
And motor operated valves (MOV), remote operated valves (ROV) and gas detectors. All solenoid valve
operations and pilot operated safety valve, field’s local systems. All transmitter like level transmitter,
pressure transmitter, flow transmitter, temperature transmitter and turbo meter.
Isolation Recycle Discharge valve leaking .Engine cylinder function. Cylinder fire order Fuel gas
splurging, Cooled water supply, SDV & BDV operation, Trouble shooting, etc.
GAS POWER TURBINE:
Knowledge of operating GAS POWER TURBINE driven compressor and start up of motor driven
compressor (SIEMENS)
GAS TURBINE TYPE
(SGT-6OO.DOUBLE SHAFT TWO STAGE.)
Gas Generator – 9900 rpm.

6. Power Turbine-7700 rpm.
Power output-25550kw
COMPRESSOR TYPE
(STC-SV-12MV6B)
Rated Power-18925kw
Rated Capacity-23669m3/h
Maximum Speed-7700 rpm
UTILITY
Well experienced in utility operations such as Gas turbine Generator, utility & Instrument Air
Compressor, Centrifugal pump.Piston pump.Water treatment plant. Firewater pump, Produced water
Treatment plant.Raw water Treatment, Sewage water and effluent treatment, Cooling Tower, Chemical
Injection, etc.
CHEMICAL INJECTION SYSTEM:
Handled following Crude oil injection & Treatment chemicals such as pour point Depressant,
Emulsifier, Gas treatment chemical like glycol, forth gent Methanol, Water injection chemicals such as
biocide Oxygen Scavenger.
NATURE OF DUTIES
• Routine check up all parameters
• Monitoring all transfer pumps
• Monitors all oil and gas well head parameters
• Control the plant chemical injection rate.
• Preparing of plant operating reports as requested by production supervisor
• Take immediate corrective action to limited risk in plant equipment Personnel and production
during emergency situation.
• Guides and direct plant shift operator for all external manual plant operation
• Maintain detailed events and fault log books
• Identify any fault and inform the concerned departments for remedial action.
• Reports immediately to supervisor any fault, break down of equipment or machinery.
SAFETY DEVICES:
Having knowledge of Operating dry chemically powder Co2 Extinguishers, Water sprinkler
system, fusible plugs, Deluge valve operation fire monitor & Fire Hydrant operations, fire & gas panel
automatic/manually Release system, fire and Gas detectors, H2S detectors Flare fuel gas system and water
seal system
PERSONAL POSITIVE STRENGTHS:
• Social Adaptability
• Hard Worker
• Ability to work under pressure
• Punctuality
• Self Organizing
Thanks &Regards
N.Joseph JaiwinDass

7. Power Turbine-7700 rpm.
Power output-25550kw
COMPRESSOR TYPE
(STC-SV-12MV6B)
Rated Power-18925kw
Rated Capacity-23669m3/h
Maximum Speed-7700 rpm
UTILITY
Well experienced in utility operations such as Gas turbine Generator, utility & Instrument Air
Compressor, Centrifugal pump.Piston pump.Water treatment plant. Firewater pump, Produced water
Treatment plant.Raw water Treatment, Sewage water and effluent treatment, Cooling Tower, Chemical
Injection, etc.
CHEMICAL INJECTION SYSTEM:
Handled following Crude oil injection & Treatment chemicals such as pour point Depressant,
Emulsifier, Gas treatment chemical like glycol, forth gent Methanol, Water injection chemicals such as
biocide Oxygen Scavenger.
NATURE OF DUTIES
• Routine check up all parameters
• Monitoring all transfer pumps
• Monitors all oil and gas well head parameters
• Control the plant chemical injection rate.
• Preparing of plant operating reports as requested by production supervisor
• Take immediate corrective action to limited risk in plant equipment Personnel and production
during emergency situation.
• Guides and direct plant shift operator for all external manual plant operation
• Maintain detailed events and fault log books
• Identify any fault and inform the concerned departments for remedial action.
• Reports immediately to supervisor any fault, break down of equipment or machinery.
SAFETY DEVICES:
Having knowledge of Operating dry chemically powder Co2 Extinguishers, Water sprinkler
system, fusible plugs, Deluge valve operation fire monitor & Fire Hydrant operations, fire & gas panel
automatic/manually Release system, fire and Gas detectors, H2S detectors Flare fuel gas system and water
seal system
PERSONAL POSITIVE STRENGTHS:
• Social Adaptability
• Hard Worker
• Ability to work under pressure
• Punctuality
• Self Organizing
Thanks &Regards
N.Joseph JaiwinDass