https://www.drone-thermal-camera.com/tutorials/

1. slide n.: 1© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
U S E O N LY T I F F I M A G E S C A P T U R E D D I R E C T LY B Y T H E C A M E R A .

2. slide n.: 2© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 1. First, save the project through File->Save As.

3. slide n.: 3© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 2. Add photos to the project through the Workflow menu.

4. slide n.: 4© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 3. Switch to the Reference pane in the bottom left corner and click the
„Import EXIF“ button.

5. slide n.: 5© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 4. Go back to the Workflow pane in the bottom left corner and then click
the Workflow menu again and choose Align Photos.

6. slide n.: 6© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 5. Set the accuracy to High and check that both available checkboxes are
checked. Hit OK.

7. slide n.: 7© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 6. If some of the images failed to align, you can try again with a different
accuracy or manually remove the bad images (you will see „NA“ next to
the name of the picture). If you do this, make sure to also check the
“Reset current alignment” checkbox”

8. slide n.: 8© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 7. Again in the Workflow menu, click „Build Dense Cloud“.

9. slide n.: 9© Workswell www.workswell.eu
green – ok
red – not included
in the final map
USER MANUAL:
WIRIS PRO & AGISOFT
□ 8. Check that the Quality is set to Medium and hit OK.

10. slide n.: 10© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 9. In the Workflow menu, click „Build DEM“.

11. slide n.: 11© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 10. Check that Type is Geographic, Source Data is Dense cloud,
Interpolation is Enabled and hit OK.

12. slide n.: 12© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 11. Now choose the „Build Orthomosaic“ button in Workflow.

13. slide n.: 13© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 12. Check that Surface is DEM, Blending mode is Mosaic and hit OK. All
the steps described above can be automated using the Workflow->Batch
Process feature, simply choose the same
parameters and come back to a comple-
te orthomosaic.

14. slide n.: 14© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 13. To access your newly created orthomosaic, click the Arrow next to the
Chunk name, double-click the Orthomosaic and switch to the Ortho
window.

15. slide n.: 15© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 14. It is possible that your orthomosaic has a bad brightness just like ours
in the previous picture. To fix this, click the Brightness icon, then click
Estimate and click OK.
The orthomosaic should be
grayscaled in a normal range
now.

16. slide n.: 16© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 15. To apply our formula (to see the coloured orthomosaic), click the
Palette icon, type in „B1/40 – 100“ into the Output Bands window and hit
OK. Open the window
again and switch to the
Palette card for further
customizations. In case
you captured data in
the JPEG format and
converted it via
ThermoFormat,
use 0.04*B1 – 273.15“.

17. slide n.: 17© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 16. After choosing a palette, click the Auto button in Range and hit OK.

18. slide n.: 18© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 17. When you mouse over a certain pixel, you can see its coordinates and
altitude above the sea level in the bottom right corner, most importantly
the temperature of the
particular pixel described
as“index=“

19. slide n.: 19© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 18. To export your created orthomosaic, go to the File menu, click Export-
>Export Orthomosaic->Export JPEG/TIFF/PNG.

20. slide n.: 20© Workswell www.workswell.eu
USER MANUAL:
WIRIS PRO & AGISOFT
□ 19. In the Raster transform section, choose Index Color, make sure the
„Write alpha channel“ is checked and hit Export. Then after you write a
name, make sure you are exporting in
the TIF (TIFF) format. Alternatively, if you
didn’t create the colored orthomosaic,
choose „Index Value“ instead of „Index
Color“.