EOC3

1. EC202- Computer Aided Design
NAME:………………………………………………………. CLASS.: ………………
REGISTRATION NO.: ………………………………………
END OF CHAPTER PROBLEM: 3
APPLICATION OF AUTOCAD PACKAGE IN TECHNICAL AND ELECTRICAL
DRAWINGS: THE EDIT/MODIFY COMMAND AND DISPLAY CONTROLS
No.
Skill
i. Accuracy
ii. Within Time Frame
Excellent
(8-10 marks)
amy/khk/jke/puo EC9.1
Average
(5-7 Marks)
Weak
(0-4 Marks)
Total
1.
Setting A4 Metric
Measurement & drawing
limits
2. Fig. 9.1
3. Fig. 9.2
4. Fig. 9.3
Sub-Total /40
No. Report Total
1. Discussion /10
2. Question /3
3. Reflection /2
Sub-Total /10
Total /55

2. EC202- Computer Aided Design
END OF CHAPTER PROBLEM: 3
TITLE : APPLICATION OF AUTOCAD PACKAGE IN TECHNICAL AND
ELECTRICAL DRAWINGS
COURSE LEARNING OUTCOME:
CLO 4: Apply the draw and edit/modify commands skillfully to produce simple and
complex technical drawings.
OBJECTIVES: The students should be able to:
1. Edit objects by using the Edit/Modify Commands such as Erase, Move,
Rotate, Break, Trim, Scale, Mirror, Array, Stretch, Extend, Fillet,
Chamfer, Offset, Divider, Measure, Change and Poly-Edit.
2. Draw and Edit simple and complex technical drawings by making use of
the Draw and Edit/Modify commands.
EQUIPMENT : 1. Desktop Computer/Laptop
2. AutoCAD 2004 Software
PROCEDURE:
1. Create a new drawing space using the Metric measurement.
2. Set the drawing limits to A4 paper size.
3. Display the grid to the extent of the drawing limits.
4. Redraw to full-scale size all the figures given in Fig. 9.1 to Fig. 9.3.
5. Make dimensions to the figures drawn.
6. Save the drawing file and exit AutoCAD.
amy/khk/jke/puo EC9.2

3. EC202- Computer Aided Design
Fig. 8.1
Fig. 8.2
amy/khk/jke/puo EC9.3
(10 Marks)
(10 Marks)

4. EC202- Computer Aided Design
DISCUSSION :
Fig. 8.3
1. Name 5 common types of dimensions commands.
i. …………………………………..
ii. …………………………………..
iii. …………………………………..
iv. …………………………………..
v. ………………………………….
(10 Marks)
2. Dimension Styles is used to control or create the appearance of the dimensions.
Name 5 parameters that are you can modify to suit your drawing specifications.
i. ………………………………….
ii. ………………………………….
iii. ………………………………….
iv. ………………………………….
v. ………………………………….
amy/khk/jke/puo EC9.4
(5 Marks)
(5 Marks)

5. EC202- Computer Aided Design
QUESTION :
Describe how to change the size of a center mark in the dimension command?
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
REFLECTION:
At the end of this practical work, I had learnt that:
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
…………………………………………………………………………………………………
amy/khk/jke/puo EC9.5
(3 Marks)
(2 Marks)