YDM Conservative Treatment Catalogue

1. Excavator
Filling Instrument
Composite Syringe
Amalgam Product
Matrix Retainer / Separator
Contact Protector
Applicator
Rubber Dam Product
Endodontic Product
Fiber Cutter
34
36
40
40
41
41
42
43
46
54
33

2. 3534
-CDR-
*Material / Si (Handle)
*The edge along with the circle
at a tip remove softened dentin
and make cavity preparation
efficiently.
Str. #1 / Cvd. #1
Str. #2 / Cvd. #2
Str. #3 / Cvd. #3
Description #1 #2 #3 #4L
Str. Cavity preparation for
wall and floor.
01601 01602 01603 01604
Cvd.
Used for undercut area,
narrow rim of an opening
and at the cavity angle.
01701 01702 01703 01704
#1 / #2
-Round Tip-
*Material / Si (Handle)
1.1mm1.5mm2.0mm
*300° wide edge allows efficiently removal of cavity dentine.
*Slope working part design allows easy clean of particles.
*Excavator which pursued minimal intervention.
Excavator
Str. #4L / Cvd. #4L
2.0m
m
1.3m
m
0.9m
m
#1
No. 01711
#2
No. 01712
#3
No. 01713
0.7mm

3. ø2.0mm
ø2.5mm
ø3.5mm
ø3.0mm
ø3.5mm ø3.5mm
ø2.0mm
ø2.0mm
ø2.5mm
#1
No. 03001
#6
No. 03006
#7A
No. 03015
#13
No. 03013
SSW #2
No. 03102
#14
No. 03014
#4
No. 03004
#14A
No. 03016
#13A
No. 03017
#9
No. 03009
#7
No. 03007
*For efficient filling to proximal, thickness at the tip is thin.
Anterior
No. 03231
Posterior
No. 03232
No. 03241
Plastic Filling Instrument
Cement Filling Instrument
Proximal Filling Instrument
-DLC-
*Diamond Like Carbon Coating
#1
Filling
No. 03381
#2
Filling / Carving
No. 03382
#3
Filling / Carving
(Mesial and distal of posterior teeth)
No. 03383
#4
Filling / Carving
(Labial region of anterior teeth)
No. 03384
#5
Carving
(Pit-and -fissure / Occlusal surface)
No. 03385
#6
Filling
(Occlusal surface)
No. 03386
*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.
ø1.5mm
ø1.0mm
ø3.5mm
ø2.5mm
ø3.5mm
ø2.2mm
*Thickness / 0.2mm (#2, #3, #4)
Composite Filling Instrument
#CP3
No. 03333
*Teflon Coating
#CP4
No. 03334
*Teflon Coating
DLC #2A
No. 23425
*Diamond Like Carbon Coating
DLC #2B
No. 23426
*Diamond Like Carbon Coating
*Thickness / 0.2mm
Composite Filling Instrument Tip (Replaceable Type)
P-A (ø8mm)
No. 10201
P-F (ø6mm)
No. 10205
P-B (ø8mm)
No. 10202
P-C (ø6mm)
No. 10203
*Remove all joint parts and replaceable tip before sterilization and disinfection.
*For more replaceable type products see P. 201.
-Handle-
-Tip (3 ea.)-
3736

4. -TMDU 2 (Tokyo Medical Dental University)-
*Thickness / 0.2mm (#1)
0.1mm (#2)
*Material / Si (Color Ring)
*Diamond Like Carbon Coating
*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.
ø0.9mm
ø3.2mm
ø1.6mm
#1 Blue
Filling / Carving
No. 03341
#2 Green
Filling / Flowable regin applying
No. 03342
#3 Red
Filling / Carving
No. 03343
#4 Silver
Removal of surplus resin
(Proximal area / Margin area)
No. 03344
-TMDU 3 (Tokyo Medical Dental University)-
ø1.5mm
ø0.9mm
ø2.5mm
*Thickness / 0.1mm (#1 & #3 Left)
0.2mm (#3 Right)
*Diamond Like Carbon Coating
*Remarkably stick-resistant for easy workability. Improved strength, and superior wear resistance.
*Sharp knife edge cuts
burr on interproximal
areas.
#1
Red
[ Contact surface of tooth ]
Excellenty thin tip allows
approach narrow proximal
area.
[ Anterior lavial side ]
Inside curved part is for cervical
area and outside one is for
incisal area.
#4
White
[Margin]
Remove with scraping
surplus resin after cured.
#3
Green
[ Molar occlusal side /
Anterior lingual side ]
For Class I cavity, fill cavity wall
and cavity floor without bubble.
[ Molar occlusal side ]
Adjust shape after filling.
Efficient for lingual side of
upper central incisal too.
#5
Yellow
[Molar occlusal side]
Make pit part.
[Molar occlusal side]
Form occlusal ridge.
#2
Blue
[ Molar occlusal side ]
For pit and fissure.
[ Premolar lavial side ]
Curved neck part allows it
easy to approach over lip.
#4
Silver
[Margins]
Remove with scraping surplus
resin after cured.
#2
Green
[ Cavity Floor /
Molar occlusal side ]
Fill flowable resin into tiny cavity.
Form occlusal ridge.
[ Molar occlusal side /
Anterior lingial side ]
Fill big pit.
#3
Red
[ Far end of last molar ]
Excellent angle for
approaching,filling distal end
of the last molar.
[Anterior lavial side]
Inside curved part is for cervical
area and outside one is for
incisal area.
#1
Blue
[Molar occlusal side /
Anterior lingual side]
Fill cavity wall and cavity floor
without bubble.
[ Molar and Carrying resin ]
Fill molar part and adjust shape
of rejin,carry rejin.
3938
#1 Red
Filling / Carving
No. 03391
#2 Blue
Filling / Carving
No. 03392
#3 Green
Filling (Class 1 cavity) / Carving (Occlusal surface)
No. 03393
#4 White
Removal of surplus resin
(Proximal area / Margin area)
No. 03394
#5 Yellow
Carving
(Occlusal surface)
No. 03395
*Forming ridge and occulusal
fossa.
*Effective design for filling of class
1 cavity wall and line angle.
*Sharp knife edge cuts
burr on interproximal
areas.
Composite Filling Instrument
*Cavity floor

5. No. Description
13255 Main Body L
13256 Main Body S
13188 Nozzle & Plug L (100 ea.)
13190 Nozzle & Plug S (100 ea.)
13193 Nozzle & Plug L (500 ea.)
13194 Nozzle & Plug S (500 ea.)
L : Main body L / Nozzle & Plug L (100 ea.)
S : Main body S / Nozzle & Plug S (100 ea.)
*Material / PPS (Black part)
Nozzle & Plug S
(Plug / Green)
Nozzle & Plug L
(Plug / Blue)
Main Body
L
No. 13251
S
No. 13252
No. Description
13171 Main Body
13172 Band (10 ea.)
No. 13170
Thickness / 30μm
S
No. 05002
Round Handle
No. 07100
Contents Contents
Individual Parts
Individual Parts
No. 13175 Anterior
Posterior
*Thickness / 50μm
*Not sold separately.
*Protect adjacent tooth during the cavity cutting.
Elliot
Posterior
No. 13162
Ivory
Anterior
No. 13161
Anterior (10 ea.) / Posterior (10 ea.)
*It is used after letting froth pass in a hole.
- How to use -*Stainless Steel
Contents
4140
Main body / Band (10 ea.)
Crown part
Dental neck part
1) The both ends of a matrix
retainer band are united and
made a ring.
2) The matrix retainer band which became a ring is inserted in a
matrix retainer and a fixed screw is tightened.
3) Apply to the target tooth and tightened adjustable screw.
- How to use -
Fixed Screw
Upper Right / Lower Left
Upper Left / Lower Right
Adjustable Screw
Adapter
PlugNozzle
- How to use -
*Resin of necessary quantity is filled
in a nozzle, and a plug is inserted
in and it is used by equipping into
Syringe.
Composite Syringe Type-2
Amalgam Carver
Matrix Retainer Set
Amalgam Burnisher
Separator
Contact Protector Set

6. No. Description Shape
08526 #26 Upper molars A
08501 #201 Upper molars A
08556 #56 Lower molars A
08502 #202 Lower molars B
08506 #206 Premolars A
08507 #207 Premolars B
08527 #26A Premolars B
No. Description Shape
08510 #210 Anterior teeth B
08511 #211 Anterior teeth B
08560 #DR Lower first deciduous molar right A
08561 #DL Lower first deciduous molar left A
08512 #12A Lower molars / Wisdom teeth B
08513 #13A Lower molars / Wisdom teeth B
#210 #211 #DR #DL
#206 #207 #12A #13A
#201 #26 #202 #56
#26A
*#12A / 13A → Serrated jaws and offset jaw height provides stability to partially erupted teeth.
*#26 / #26A → Used in pedodontic. In that case, #26 is for deciduous molars and #26A is for deciduous anterior teeth.
Board
No. 08258
No. 25015
ø1.5mm
1.1m
m
ø2.5mm
2.5m
m
ø1.5mm
1.1m
m
ø2.5mm
2.5m
m
F-B #3
No. 03203
F-B #4
No. 03204
F-B #4
No. 03214
F-B #3
No. 03213 -Clamp shape-
Fit on gingival margin.
(Grasp part curves downward)
Gum is not pressed.
(Grasp part is flat)
A
B
Size / W132 x D87mm
*Stainless Steel-Round-
-Octagonal-
- How to use -
4342
Rubber Dam ClampLining Applicator
Ball-Pointed Applicator

7. No. 08591
*Material / Si (Green part)
Adult
No. 08101
Child
No. 08102
Size / W98 x D90mm
Size / W89 x D70mm
Rubber Dum Clamp / Board / Rubber Dam Punch Type-2 / Clamp Forceps YS / Young Frame for Adult / Sterilization Case
Sterilization Case
No. 24052
YS
No. 08121
Brewer
No. 08120
Hole diameter / ø0.75mm
ø1.00mm
ø1.50mm
ø1.70mm
ø2.00mm
No. 08111
*Size / 165mm
*Size / 175mm
*Size / 165mm
4544
Young FrameRubber Dam Punch Type-2
Rubber Dam Kit Type-2Clamp Forceps
Contents
Individual Parts

8. *Storage capacity / 8 reamers and files
*Size / W74 x D10 x H52 mm
*Material / POM
*Sterilizable with liquid sterilizing solutions.
*Product does not include reamers and files.
Case
No. 08439
No. Description
08431 Yellow
08432 Orange
08433 Pink
08434 Blue
08435 Green
*Can be arranged "Reamer Guard" by reamer or file type and size.
*Cover will not allow the reamers and files to fall out.
*An Engine reamer can be stored with "Bur Guard".
-Holding length-
Up to 12mm
Up to 31mm
Carry (3 ea.) / Case
No. Description
08412 Carry (3 ea.)
24016 Case
No. 08411
*Storage capacity / 12 reamers and files (Carry)
/ 6 ea. (Case)
*Size / W60 x D30 x H33mm (Carry)
/ W120 x D90 x H40mm (Case)
*Storage capacity / 18 ea.
*Size / W167 x D126 x H62mm
*Sterilizable with liquid sterilizing solutions.
*Product does not include "Reamer Guard".
*Able to connect each "Reamer Guards".*The cover becomes a stand. *Has a built in gauge to measure stop positions
during root canal treatments.
Contents
Individual Parts
Sold Separately
No. 08415
*It is ideal for managing reamers and files for every patients.
*Can be autoclave or ultrasonic cleaning with reamers and files.
*Lid does not allow reamers and files to fall out.
*Has a build in ruler.
*Storage capacity / 11 reamers and files
*Holding length / From 21 to 31mm
*Size / W48 x D43 x H47mm
*Material / PP (Green part)
*Product does not include reamers and files.
*Size / ø45 x H36mm
*Product does not include reamers and files.
No. 08423
*During the treatment, can be cleaned reamers
and files by paper.
*Set 2 sheets to stabilize reamers for cleaning.
Paper
No. 08422
(300 sheets)
Contents
Individual Parts
4746
Reamer Guard Reamer Stand
-Safety-
-Carry Set-
Main Body / Paper (100 sheets)
Clean Pot

9. Str.
No. 13615
Cvd.
No. 13617
3ml.
No. 13227
*Material / PFA (Cap / Main body)
PP (Trigger)
ø11mm Tapered
(From ø9.9 to ø11.5mm)
ø10mm
*The inside of a root canal is dried by an air current
with suction in a root canal.
*Because of drying by an air current, it also becomes
saving of a paper point.
Contents
Distal
No. 13150
No. 08064
*Excellent for use in hard-to-reach posterior teeth.
*Applicable for root canal treatment of both mesial and distal.
Mesial
No. 21155
4cm
No. 21151
No. 21154
Front side Back side
for Root Canal Therapy #16
No. 01316
4948
Main Body / Joint (ø10mm & ø11mm Tapered) / Nozzle (5 ea.) / Cleaning Wire
Adapter
No. 13614
*In case the inside diameter of
evacuation tube is 16mm, this
adaptor is needed for the use
of Evacuation Tip Universal.
*Material / PTFE
Nozzle
No. 13616
(5 ea.)
Size / 200mm
*Tip outside diameter / ø0.6mm
Cleaning Brush S (ø4mm)
No. 13651
(12 ea.)
Endodontic Aspirator Type-2
Irrigating Syringe
Individual Parts
Sold Separately
Broach Holder
File Holder Type-2
ScaleFinger Ruler
Endodontic Gauge
Cleaning Wire
No. 90341
Explorer

10. Str.
Anterior
No. 18910
*For removal of reamers and files deeper within rood canal.
*The tip has a groove to securely hold residual reamer or file.
*Assures firm grip of residual reamer or paper point in root canal.
Cvd.
Posterior
No. 18911
Mini
No. 24017
No. 08063
*Size / W91 x D42 x H13mm
*Material / Si (Green part)
*Product does not include main and accessory points.
*Can be autoclave with points.
0.7mm
#1
No. 11311
#2
No. 11312
#3
No. 11113
with Lock
No. 11316
Beach
No. 11117
Size / 160mm
Size / 160mm
Size / 160mm
Size / 170mm
Size / 161mm
Sleeve (2 ea.) / Gauge (2 ea.)Contents
*Suitable for root canal treatment, accurate examination before
placing an implant, checking of calculus quantity and its area.
No. 21157
Sleeve Gauge
(1mm by 1mm with hold line every 5mm) - How to use -
*Size / W38 x D48 x H8.5mm (Sleeve)
W33 x D45mm (Gauge)
*Material / Si (Sleeve)
X-Ray Gauge
5150
Gutta Percha Case
Root Forceps
Stieglitz Root Forceps
Endodontic Tweezers

11. #1
No. 08026
#2
No. 08027
#3
No. 08028
*Combination of heat cutter and plugger makes cutting and compacting of extra gutta percha easily.
*Heat cutter is designed with a metal heat retention bulb for longer working time.
Heat retention bulb
#2
No. 08022
#1
No. 08021
#3
No. 08023
#1
No. 08031
#2
No. 08035
ø1.0mm
ø1.0mm
#2
Upper
No. 08012
S
L
#0.25S
No. 08032
#0.4S
No. 08033
*Since an elastic metal is used, the root canal which is curving can also be pressurized in
accordance with a root wall.
#0.4S
No. 08002
#0.4L
No. 08005
#0.6S
No. 08003
#0.25S
No. 08001
#0.25L
No. 08004
#1
Anterior
No. 08011
*Superelastic Alloy
ø0.25mm
ø0.4mm
ø0.6mm
ø0.4mm
ø0.25mm
ø0.4mm
#0.25S
No. 23551
#0.4S
No. 23552
23m
m
28m
m
ø1.3mm
ø1.0mm ø0.7mm
ø1.5mm
ø1.0mm ø0.5mm
ø2.0mm
ø1.3mm
*Heat Cutter
*Plugger
Tapered / 3%
Tapered / 3%
Tapered / 3%
-Ultra-
-with Heat Cutter-
P-A (ø8mm)
No. 10201
P-F (ø6mm)
No. 10205
P-B (ø8mm)
No. 10202
P-C (ø6mm)
No. 10203
*Remove all joint parts and replaceable tip before sterilization and disinfection.
*For more replaceable type products see P. 201.
-Handle-
-Tip (3 ea.)-
-Round-
-Octagonal-
#1-2
No. 08030
#3
Lower
No. 08013
23m
m
5352
Spreader
Heat Cutter
Spreader Tip (Replaceable Type)
Root Canal Plugger

12. No. 08070
*Easy to cut the fiber post length for your need.
*There is no fluff of a cutting plane.
*Particulates are not generated.
*Cut fiber can be entered in to the
holder.
*Easy to cut the fiber thanks to the
gauge on the holder.
(Measurement from 5mm to 15mm)
*Size / 130mm
*Material / TPX (Holder)
Main body / Holder / Sleeve Guide (3 ea.)
Problems from using Steal Round Bur, Cutting Disc, Diamond Disc
1) Fiber become fluffy.
2) Melt the surface because of the friction heat between fiber post and bur.
3) Remain the color of bur or disc on the section.
Contents
Fiber Cutter Nipper Steal Round Bur Cutting Disc
Cutting Disc
with Diamond
54
Fiber Cutter