This is presentation of step by step tutorial of hole wizard feature of solidworks 3D modelling software. It helps to create different types of holes or slot in 3D model. It explains each steps with images of hole wizard feature application which helps beginners to follow and learn easily. Hole wizard feature also helps mechanical engineering students or product designers to create holes as per their assignments or projects.

1. HOLEWIZARD SOLIDWORKS
FEATURETUTORIAL
Step By StepTutorial For Learning HoleWizard FeatureTutorial

2. WHAT IS HOLEWIZARD SOLIDWORKS FEATURE?
The HoleWizard is solidworks feature which helps to create holes in part
or assembly file without drawing an additional sketch.
There are different types of hole can be created by using Hole Wizard
SolidWorks feature.
In this presentation, you will get know hole wizard property manager
and how to create hole in 3D model.

3. There is 3D cylinder
model shown in the
figure. Here, you are
going to create holes on
it using Hole Wizard
SolidWorks feature.
STEP-1

4. STEP-2
Make sure, you are “Exit fromThe Sketch”.
Go to Features Command Manager, Select
“HoleWizard”.
Or
you can go to Insert menu -> Features -> HoleWizard

5. STEP-3
Here you can see HoleWizard property manager.There
are two tabs, you can see in it.
1. Type
2. Positions.
• Type:-
Type means, “HoleType”.There are lot of Hole type is
available in the property manager.They are, Counter
bore, counter sink, hole, straight tap, tapered tap, legacy
hole, counter sink slot, counter bore slot and slot.
Here , you have to select any one of the hole type as you
need to create on model. For example, selecting
“Counterbore” hole.

6. STEP-4
Once you selected Hole type,You have to set:
1. Standard :- Any dimensional standard like DIN,ANSI, ISO
etc
2. Type of Hole as per bolt types.
3. Hole Specifications:- Hole size, type of fit etc.
4. End Condition:- Here you have to decide how much depth
as you needed this hole on your 3D model. Here, Blind,
Through all, Up to Next, Up toVertex etc options are
available.
You have to select above said things as per your hole
requirements.

7. STEP-5
You have to select face where you want to create
hole or slot in the 3D model. If you want to make
holes on multiple faces, click on “3D Sketch”.

8. Here, selecting the top
face and hole preview
can be seen as yellow
color.
You have move your
mouse pointer to select
positions of holes.
STEP-6

9. Click on “ok” or green
tick button.
This is final hole image.
STEP-7
To get more SolidWorksTutorials, visit :-
www.SolidWorksTutorialsforBeginners.com

10. ThankYou