6. Validation and notes: Step 1: Got to Viscamview program, to determine if all meshes and joints are correct.
7. Viscam View: In the program you will see by color if The elements or modelings are correct. Functions in the software are helpful tools, you can make notations to consider in your design: text, dimension, meshes, joints, etc….
8. At the end if your modeling is correct, export it to the format or save it in STL and open it in Roland Modela player 4 to start with the rapid prototiping. If any error exist on your object the correction or modifying element must be changed in rhino.
9. Programing To program you should use Roland Modela Player 4 Inicio -> Programas -> Roland Modela Player 4 -> Modela Player 4 Click!
10. Now you will see a new window. If you can´t see it the program is not runing!! This is how the window should look like
11.
12. Now You will see your file loaded on Modela Player 4 Click Here to start programing, begining with the CENTER
14. Then click to prepare the faces That you will rough.
15.
16.
17.
18. Select the type of process that you want to use This are The types of process Preparing surface Rough machining Finishing Driling Select the Cutting Surface
19. Select the drill For a Rough Machine process select a 6 mm square drill For a finishing Process select a R1.5 ball drill Stablish the area and deepness
20. The step 5 and 6 just click next these are already defined Named the process You can make more than one process, if you do this Start over the steps