The document describes the WireXpert cable certifier. It can certify the highest performance cabling systems, including CAT8 copper and MPO fiber optic cabling. Cable installers can be more productive with its fast test speeds. It is accurate, endorsed by major cable vendors, and future-proof to support speeds beyond 10Gbps.
Wirexpert 4500 es un certificador de cable utpCSITEC PERU SAC
The WireXpert is a cable certifier that can test the highest performance copper and fiber cabling systems. It offers the fastest testing speeds on the market with full certification of CAT8 copper and MPO fiber in under 15 seconds. The WireXpert has a future-proof design that ensures accuracy as network speeds increase beyond 10Gbps. It is the only cable certifier approved by major cable vendors for qualifying and certifying the latest cabling standards.
Fluke Networks’ DTX Patch Cord Test Adapter Series gives you
a simple, cost-effective way to quickly verify whether a patch
cord meets industry performance specifications.
Principals of Low Resistance Testing Webinar with MeggerTranscat
During this webinar you will learn the following:
• What is considered a Low Resistance Test?
• When to measure Low Resistance
• Why measure Low Resistance?
• Benefits of Low Resistance Testing
• DLRO2 - Features and Key Characteristics
The Basics of Automotive Ethernet Webinar Slidedeckteledynelecroy
Evolving from the BroadR-Reach standard, Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected vehicles of the future.
This session will focus on the fundamentals of the Automotive Ethernet ecosystem. It will include a brief history and evolution of the standard, and an overview of benefits of the new technology and the associated design challenges. We will conclude with an introduction into the test requirements and the analysis tools available to help troubleshoot and qualify designs.
The document summarizes a stress test performed on several Wi-Fi access points from different vendors. The test aimed to determine each AP's breaking point under high client load and use of applications like video streaming. Ruckus' ZoneFlex 7982 AP had the highest average TCP throughput and lowest number of video transmission errors, performing best overall. The document attributes Ruckus' superior performance to its BeamFlex statistical optimization technology, which constantly selects the highest data rates for clients through antenna pattern selection and sampling of the environment.
The document summarizes the results of stress tests conducted by Croatian Academic and Research Network (CARNet) on various enterprise Wi-Fi access points. A total of 6 vendors participated in the tests, bringing their best AP models to a classroom test environment. A mix of 60 client devices were used to test the APs under increasing loads of 13, 23, 36, and 60 clients, as well as with 36 clients distributed across an arc. Test metrics included throughput and number of failed connections. Ruckus APs consistently achieved the highest throughput scores across all tests, with their R500 and R700 models ranking first or second in each category.
Gigalight is an optical interconnection design innovator based in China. It has technology centers in Shenzhen and Wuhan for developing products like cloud and datacenter transceivers, active optical cables, and 400G transceivers. Gigalight has over 500 employees and annual revenue of $52 million. The company focuses on optical transceiver modules, active optical cables, MPO cabling, and solutions for datacenter, metro, broadcast, and 5G networks. Gigalight aims to be a one-stop supplier of optical network devices through its technological platforms and partnerships.
Wirexpert 4500 es un certificador de cable utpCSITEC PERU SAC
The WireXpert is a cable certifier that can test the highest performance copper and fiber cabling systems. It offers the fastest testing speeds on the market with full certification of CAT8 copper and MPO fiber in under 15 seconds. The WireXpert has a future-proof design that ensures accuracy as network speeds increase beyond 10Gbps. It is the only cable certifier approved by major cable vendors for qualifying and certifying the latest cabling standards.
Fluke Networks’ DTX Patch Cord Test Adapter Series gives you
a simple, cost-effective way to quickly verify whether a patch
cord meets industry performance specifications.
Principals of Low Resistance Testing Webinar with MeggerTranscat
During this webinar you will learn the following:
• What is considered a Low Resistance Test?
• When to measure Low Resistance
• Why measure Low Resistance?
• Benefits of Low Resistance Testing
• DLRO2 - Features and Key Characteristics
The Basics of Automotive Ethernet Webinar Slidedeckteledynelecroy
Evolving from the BroadR-Reach standard, Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected vehicles of the future.
This session will focus on the fundamentals of the Automotive Ethernet ecosystem. It will include a brief history and evolution of the standard, and an overview of benefits of the new technology and the associated design challenges. We will conclude with an introduction into the test requirements and the analysis tools available to help troubleshoot and qualify designs.
The document summarizes a stress test performed on several Wi-Fi access points from different vendors. The test aimed to determine each AP's breaking point under high client load and use of applications like video streaming. Ruckus' ZoneFlex 7982 AP had the highest average TCP throughput and lowest number of video transmission errors, performing best overall. The document attributes Ruckus' superior performance to its BeamFlex statistical optimization technology, which constantly selects the highest data rates for clients through antenna pattern selection and sampling of the environment.
The document summarizes the results of stress tests conducted by Croatian Academic and Research Network (CARNet) on various enterprise Wi-Fi access points. A total of 6 vendors participated in the tests, bringing their best AP models to a classroom test environment. A mix of 60 client devices were used to test the APs under increasing loads of 13, 23, 36, and 60 clients, as well as with 36 clients distributed across an arc. Test metrics included throughput and number of failed connections. Ruckus APs consistently achieved the highest throughput scores across all tests, with their R500 and R700 models ranking first or second in each category.
Gigalight is an optical interconnection design innovator based in China. It has technology centers in Shenzhen and Wuhan for developing products like cloud and datacenter transceivers, active optical cables, and 400G transceivers. Gigalight has over 500 employees and annual revenue of $52 million. The company focuses on optical transceiver modules, active optical cables, MPO cabling, and solutions for datacenter, metro, broadcast, and 5G networks. Gigalight aims to be a one-stop supplier of optical network devices through its technological platforms and partnerships.
The document provides product information and specifications for an Andrew L4.5PDF-RC Right Flare DIN Female Connector. It describes how to purchase the product from Launch 3 Telecom, includes payment and shipping details, and provides specifications for the connector including electrical and mechanical specifications, environmental specifications, and regulatory compliance information. It also describes additional services provided by Launch 3 Telecom such as repairs, maintenance contracts, de-installation, and recycling.
This document provides specifications for a drop cable with two singlemode fibers using G657A optical fiber. It describes the cable construction which includes the optical fibers positioned in the center with strength elements on both sides and a black LSZH outer sheath. Dimensions and tolerances are provided for the optical fiber, fiber coating, and overall cable. Performance specifications include attenuation, dispersion, proof stress level, macrobend loss, and mechanical tests for tensile strength, crush resistance, impact, bending, and environmental conditions. The cable is designed to meet relevant ITU, IEC, and other standards for reliability and performance in fiber to the home applications.
Shenzhen KINGTON Optic Co.Ltd is a Chinese company founded in 2005 that specializes in research, production, and export of fiber optic equipment. They have attracted many optical technology experts and have over 10 years of experience in the optical telecommunications field. Their main products include optical splitters, fiber arrays, connectors, and other passive fiber optic components. In particular, their planar waveguide optical splitters perform well and meet telecommunications standards. KINGTON aims to be a leading fiber optic manufacturer worldwide through technology research, cost innovation, and management improvements.
Micro Scanner2 - Raising Cable Verification to a Higher PowerFluke Networks
For more than a decade, cabling installation and maintenance technicians have relied on MicroScanner to verify terminations and troubleshoot continuity.
faults.
Take a walk through the process of certifying a new PROFINET (or any other industrial Ethernet) against the standards and see how easy it can be, then look at a few gotchas that can easily be avoided by careful planning.
Tom Spence has over 22 years of experience in IP networking, Unix, and mainframe programming. He currently works as a senior network planning engineer for AT&T, where he has helped plan and implement their mobility IP network to support the migration from PSTN to IP. He has extensive experience with Cisco, Alcatel-Lucent, and Spirent equipment, as well as various programming languages. He holds numerous certifications from Alcatel-Lucent and AT&T Mobility.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
Shenzhen Kington Optic Co. Ltd is a fiber optic equipment manufacturer founded in 2005 in China. It has attracted many optical technology experts and engineers over the past 10+ years. The company specializes in developing and producing passive optical products like optical splitters, fiber arrays, connectors, and attenuators. In particular, their planar waveguide optical splitters perform well and meet industry reliability standards. Kington aims to be a leading fiber optic equipment manufacturer worldwide through technology research, cost innovation, and management improvements.
Shenzhen KINGTON Optic Co.Ltd is a Chinese company founded in 2005 that specializes in research, production, and export of fiber optic equipment. The company has attracted optical technology experts and has over 10 years of experience in the optical telecommunications field. KINGTON's main products include optical splitters, fiber arrays, connectors, and other passive fiber optic components. In particular, the company focuses on planar waveguide optical splitters that offer good performance and stability.
PLCs running code generated from MATLAB/Simulink have recently been promoted heavily on the Hannover Messe and SPS Drives. What is this? How do we use the quite unknown oversampling and I-Device features of PROFINET to even extend the application range? Some basics and use cases from industry to inspire you!
Wireless Controller Comparative Performance Cisco vs Aruba Miercom ReportCisco Mobility
The document compares the performance of wireless controllers from Cisco and Aruba. Key findings include:
1. The Cisco 8540 delivered over twice the throughput of the Aruba 7240 with small and medium packet sizes as well as mixed packet sizes.
2. The Cisco 5520 and 8540 were able to utilize a higher percentage of their maximum bandwidth (85-95% for Cisco vs. 25-30% for Aruba) across packet sizes.
3. Testing found the Cisco 5520 could handle over 3 times as many wireless client authentications per second compared to an older Cisco model, using the 802.1X authentication standard.
4. TCP throughput performance was notably better with Cisco than
This document provides product information and specifications for an Andrew L6PDF-RPC 7-16 DIN Female OnePiece connector. It describes how to purchase the product from Launch 3 Telecom, including payment and shipping details. It also provides the manufacturer information, part number, weight, and specifications such as frequency band, impedance, power handling capacity, and environmental testing standards.
This document outlines the applicant's objective, education, skills, certifications and work experience in networking. The applicant holds a Bachelor's degree from the University of Punjab and several Cisco certifications including CCNP, CCIP and CCNA. They have over 15 years of experience in networking roles with companies such as KSA Ministry of Health, Mobily, PTCL and Wateen Telecommunication, where they implemented, configured, troubleshot and maintained routing, switching, wireless and security networks. Their skills include BGP, MPLS, OSPF, VLANs, routing protocols and Cisco routers and switches.
The document discusses the evolution of data center cabling standards to support higher bandwidth needs. It notes that multi-fiber push on (MPO) cabling has increased relevance for enabling migration paths to 40G, 100G, and potential 400G connectivity while reusing existing horizontal cabling infrastructure. The document emphasizes that using PanMPO connectors can help raise performance certainty, support faster testing and installation, and reduce capital expenses during upgrades from 10G to 40G/100G and beyond.
This document discusses optical time domain reflectometer (OTDR) modules from Viavi Solutions for fiber testing. It introduces the MTS mainframe series that can host multiple OTDR and other test modules. A variety of OTDR modules are presented for different applications ranging from short to long distances. Additional capabilities like Smart Link Mapper, FiberComplete, and in-service testing are described. The document provides an overview of Viavi's OTDR portfolio to help users select the optimal solution for their fiber installation and maintenance needs.
This document provides an overview of using an OTDR (Optical Time Domain Reflectometer) to test fiber optic cabling. It discusses OTDR functionality and how to properly set up the device, including setting the range, pulse width, index of refraction, and averaging time. It also covers analyzing OTDR traces to evaluate specific events and faults along a cable span.
The document provides product information and specifications for an Andrew L4.5PDF-RC Right Flare DIN Female Connector. It describes how to purchase the product from Launch 3 Telecom, includes payment and shipping details, and provides specifications for the connector including electrical and mechanical specifications, environmental specifications, and regulatory compliance information. It also describes additional services provided by Launch 3 Telecom such as repairs, maintenance contracts, de-installation, and recycling.
This document provides specifications for a drop cable with two singlemode fibers using G657A optical fiber. It describes the cable construction which includes the optical fibers positioned in the center with strength elements on both sides and a black LSZH outer sheath. Dimensions and tolerances are provided for the optical fiber, fiber coating, and overall cable. Performance specifications include attenuation, dispersion, proof stress level, macrobend loss, and mechanical tests for tensile strength, crush resistance, impact, bending, and environmental conditions. The cable is designed to meet relevant ITU, IEC, and other standards for reliability and performance in fiber to the home applications.
Shenzhen KINGTON Optic Co.Ltd is a Chinese company founded in 2005 that specializes in research, production, and export of fiber optic equipment. They have attracted many optical technology experts and have over 10 years of experience in the optical telecommunications field. Their main products include optical splitters, fiber arrays, connectors, and other passive fiber optic components. In particular, their planar waveguide optical splitters perform well and meet telecommunications standards. KINGTON aims to be a leading fiber optic manufacturer worldwide through technology research, cost innovation, and management improvements.
Micro Scanner2 - Raising Cable Verification to a Higher PowerFluke Networks
For more than a decade, cabling installation and maintenance technicians have relied on MicroScanner to verify terminations and troubleshoot continuity.
faults.
Take a walk through the process of certifying a new PROFINET (or any other industrial Ethernet) against the standards and see how easy it can be, then look at a few gotchas that can easily be avoided by careful planning.
Tom Spence has over 22 years of experience in IP networking, Unix, and mainframe programming. He currently works as a senior network planning engineer for AT&T, where he has helped plan and implement their mobility IP network to support the migration from PSTN to IP. He has extensive experience with Cisco, Alcatel-Lucent, and Spirent equipment, as well as various programming languages. He holds numerous certifications from Alcatel-Lucent and AT&T Mobility.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
Shenzhen Kington Optic Co. Ltd is a fiber optic equipment manufacturer founded in 2005 in China. It has attracted many optical technology experts and engineers over the past 10+ years. The company specializes in developing and producing passive optical products like optical splitters, fiber arrays, connectors, and attenuators. In particular, their planar waveguide optical splitters perform well and meet industry reliability standards. Kington aims to be a leading fiber optic equipment manufacturer worldwide through technology research, cost innovation, and management improvements.
Shenzhen KINGTON Optic Co.Ltd is a Chinese company founded in 2005 that specializes in research, production, and export of fiber optic equipment. The company has attracted optical technology experts and has over 10 years of experience in the optical telecommunications field. KINGTON's main products include optical splitters, fiber arrays, connectors, and other passive fiber optic components. In particular, the company focuses on planar waveguide optical splitters that offer good performance and stability.
PLCs running code generated from MATLAB/Simulink have recently been promoted heavily on the Hannover Messe and SPS Drives. What is this? How do we use the quite unknown oversampling and I-Device features of PROFINET to even extend the application range? Some basics and use cases from industry to inspire you!
Wireless Controller Comparative Performance Cisco vs Aruba Miercom ReportCisco Mobility
The document compares the performance of wireless controllers from Cisco and Aruba. Key findings include:
1. The Cisco 8540 delivered over twice the throughput of the Aruba 7240 with small and medium packet sizes as well as mixed packet sizes.
2. The Cisco 5520 and 8540 were able to utilize a higher percentage of their maximum bandwidth (85-95% for Cisco vs. 25-30% for Aruba) across packet sizes.
3. Testing found the Cisco 5520 could handle over 3 times as many wireless client authentications per second compared to an older Cisco model, using the 802.1X authentication standard.
4. TCP throughput performance was notably better with Cisco than
This document provides product information and specifications for an Andrew L6PDF-RPC 7-16 DIN Female OnePiece connector. It describes how to purchase the product from Launch 3 Telecom, including payment and shipping details. It also provides the manufacturer information, part number, weight, and specifications such as frequency band, impedance, power handling capacity, and environmental testing standards.
This document outlines the applicant's objective, education, skills, certifications and work experience in networking. The applicant holds a Bachelor's degree from the University of Punjab and several Cisco certifications including CCNP, CCIP and CCNA. They have over 15 years of experience in networking roles with companies such as KSA Ministry of Health, Mobily, PTCL and Wateen Telecommunication, where they implemented, configured, troubleshot and maintained routing, switching, wireless and security networks. Their skills include BGP, MPLS, OSPF, VLANs, routing protocols and Cisco routers and switches.
The document discusses the evolution of data center cabling standards to support higher bandwidth needs. It notes that multi-fiber push on (MPO) cabling has increased relevance for enabling migration paths to 40G, 100G, and potential 400G connectivity while reusing existing horizontal cabling infrastructure. The document emphasizes that using PanMPO connectors can help raise performance certainty, support faster testing and installation, and reduce capital expenses during upgrades from 10G to 40G/100G and beyond.
This document discusses optical time domain reflectometer (OTDR) modules from Viavi Solutions for fiber testing. It introduces the MTS mainframe series that can host multiple OTDR and other test modules. A variety of OTDR modules are presented for different applications ranging from short to long distances. Additional capabilities like Smart Link Mapper, FiberComplete, and in-service testing are described. The document provides an overview of Viavi's OTDR portfolio to help users select the optimal solution for their fiber installation and maintenance needs.
This document provides an overview of using an OTDR (Optical Time Domain Reflectometer) to test fiber optic cabling. It discusses OTDR functionality and how to properly set up the device, including setting the range, pulse width, index of refraction, and averaging time. It also covers analyzing OTDR traces to evaluate specific events and faults along a cable span.
The document is a cover letter from Robert James Honzell applying for a position. It summarizes his over 10 years of relevant experience, including as a small business owner and in journalism. It highlights skills like communication, adaptability and working well under pressure. It provides examples of how his previous roles at a drilling company, owning two clothing stores, and as a reporter demonstrate these skills and qualifications for the position.
This document discusses the material requirements for a mechanical heart valve design. It outlines key service conditions like biocompatibility and resistance to blood flow. Desired polymer properties are strength, low friction, durability and self-lubrication. Three polymers are considered: PDMS for its elasticity and lubrication, PTFE for its strength and elongation, and polycarbonate urethane for its bonding and linkages. Polycarbonate urethane is recommended due to its bonding structure and processing method suitability.
This document reviews design methods and tools that can be used at different stages of the design process. It discusses strengths and weaknesses of various current situation assessment methods including SWOT analysis, PESTEL analysis, parametric analysis, fly on the wall observation, and observation/shadowing. These methods are used to understand the existing situation, identify opportunities and threats, and gain insights from customers to inform the design process.
This document contains links to 6 photos shared on Flickr under various Creative Commons licenses that allow for non-commercial use, sharing and remixing with attribution. The photos cover a range of subjects and were uploaded by different photographers.
This document summarizes the activities and discussions from an initial meeting between university students and a local school to plan a STEM engagement project. The meeting covered scheduling visits and activities, communication protocols, and potential activity ideas. It was decided that the students would focus on presentations, assemblies, and curriculum-linked activities to inspire students across subjects about STEM opportunities. A list of potential activities was developed covering various ages and topics. Reflections noted the importance of clear communication, balancing activity types and subject areas, and considering school and student schedules.
The document outlines meetings held with John Paul Academy to develop STEM engagement activities, including developing a shared timetable and improving communication methods. It also discusses organizing a university visit that included workshops on rapid prototyping and manufacturing processes, as well as departmental visits. The report reflects on lessons learned to improve planning and coordination of future STEM projects.
Flendr is an online platform that allows people to lend money between family and friends, conduct group collections, and fundraising. Users can create an account for their specific purpose, whether borrowing money, lending to others, collecting funds, or fundraising. Flendr handles the transfers of money in and out and sends reminders for payments and repayments to ensure transactions are completed securely and on schedule. A small fee of 2% for funds raised and collected or £1 per borrower is charged for their services.
This document provides an abstract for Marco Lotz's PhD thesis which explores using a stage/phase-gate project management approach for Clean Development Mechanism (CDM) projects in South Africa. CDM projects have technical, financial, and regulatory complexities. Lotz developed a stage/phase-gate model (Model β) for CDM projects through literature reviews, questionnaires, expert interviews, and input from the South African Clean Development Industry Association. Model β is intended to help project developers plan and execute projects, and help buyers/investors assess project status. Applying Model β is expected to better manage risks, decrease project timelines, and control costs. The research aims to address why few CDM projects have succeeded in South Africa
A Multicore Parallelization of Continuous Skyline Queries on Data StreamsTiziano De Matteis
This document summarizes a research paper on parallelizing continuous skyline queries over data streams using multicore processors. The paper presents an eager algorithm for computing skyline queries over sliding windows of data streams. It parallelizes the algorithm using a map-reduce pattern across multiple worker threads, and proposes optimizations like asynchronous reduce and load-balancing owner selection policies. Experimental results show the parallel approach achieves near-linear speedup and scales throughput up to hundreds of thousands of points processed per second.
The document summarizes a proposed mixed-use development called Central Park project on 23 acres in Nairobi, Kenya. The development will include 1,500 apartment units, a 120-room 3-star hotel, commercial and retail space, schools, medical facilities, recreational amenities, and transportation improvements. It will be developed in two phases, with the first phase consisting of apartments, a hotel, and event space. The development aims to provide modern, eco-friendly residential and commercial spaces in a walkable community with parks, cafes, and transportation access.
The document is a stage 2 report for an individual project that aims to encourage STEM engagement within extra-curricular groups. It provides an overview of the conceptual design phase where concepts were generated, evaluated, and refined. It also describes initial modeling and testing. The detailed design phase is discussed where embodiment design questions were considered and prototypes were developed and tested. The report outlines the progress made against the project methodology and provides documentation to support the design process.
Global eCommerce Trends - Archanaa JohnArchanaa John
This document discusses global trends in ecommerce and mobile commerce adoption. It finds that global ecommerce is growing rapidly at 19.4% annually and is projected to reach $1 trillion by 2016. Mobile commerce is also growing significantly, with Forrester estimating that 38% of smartphone owners and 31% of tablet owners will make purchases on mobile devices in 2014. The document also examines ecommerce trends and adoption levels in different geographic regions, finding the US and Europe to be the most mature markets while markets in Asia-Pacific like India are growing rapidly.
This document summarizes an advertisement for a luxury condominium development called 88 Nairobi located in Upper Hill, Nairobi. It highlights the development's elegant 44-floor tower that will offer breathtaking views of the city from luxury apartments. Residents will have access to high-end amenities like 24/7 concierge services, security, valet parking, a restaurant, gym, spa, and pool. The development aims to set new standards for urban living in Nairobi.
This document is an internship report submitted by an intern to their academic supervisor. It provides details about the intern's 3-month internship at BRAC Bank Limited, where they analyzed the bank's credit risk management practices. The report includes an introduction, organizational overview of BRAC Bank, and sections covering credit risk management processes such as credit approval, collection, recovery of bad loans, and performance analysis. Tables and figures are also included to analyze the performance of credit risk management based on classified loans and loan recovery rates.
This document is a curriculum vitae for Dr. Yu Zhou. It lists his contact information, professional experience as an instructor and postdoctoral associate at Washington University School of Medicine since 2010, education including a Ph.D. in Neuroscience from SUNY Buffalo in 2005, professional affiliations, honors, bibliography of 10 peer-reviewed publications as first author or corresponding author between 2005-2015, and three professional references.
Pinpoint the leading causes of downtime with LinkIQ Cable and Network TesterTranscat
The network is down and you’ll likely have to take it apart, only to find out that the source of the problem is a cabling issue. Since 40% of downtime is caused by issues such as bad connectors, broken cables, and excessive cable length, this new tester is a simple way to quickly identify the source of network downtime and quickly get your systems up and running.
Category 6 Patch Cord Performance
Sterling Vaden, VP of Research & Engineering, Optical Cable Corporation
OCC 100% performance tests all Cat6 and Cat6A patch cords using our own industry standard patch cord test adapters and our own industry standard test fixtures - because OCC (SMP) was involved in the creation of the standards and the test adaptors used.
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika
☎️ JKT 021-45850618
☎️ SBY 031-8421264
atau kunjungi website kami di https://siwali.com/
The MaxTester 635 is a next-generation tool for testing broadband deployments over copper wires. It supports testing of ADSL2+, VDSL2, and Ethernet networks. Key features include automated testing of DSL services, copper line quality, IPTV, and VoIP. Test results are displayed clearly on a large, easy-to-use touchscreen. The MaxTester 635 simplifies installation and troubleshooting of multi-play networks.
This document provides an overview of PROFINET, including:
- PROFINET uses Ethernet standards to provide industrial communications over an Ethernet network at speeds up to 100Mbit/s.
- PROFINET is compatible with PROFIBUS but is not simply PROFIBUS over Ethernet.
- PROFINET supports different update rates, priorities, and IT services for various applications on the same network.
- Commissioning and qualification of a PROFINET network involves testing the installation, topology, device identification, network loads, and more to ensure proper functioning.
Like its predecessor PROFIBUS, PROFINET is a diagnostic-rich protocol allowing your support team to quickly identify the source of device-related problems. This however is of limited use if the underlying performance of your network is poor. PROFINET networks are often seen as the plug and play solution for industrial networks, giving you the impression that successful completion of your application-specific testing is a guarantee that your network is working efficiently and without errors. This is fundamentally wrong and needs to be considered at the design stage as well as the acceptance stage of a project. This presentation will discuss the issues, how to address them and give typical examples of the equipment required.
High Cost of a Low-Cost Cable Certification TesterFluke Networks
Things to consider while selecting a new certification tester for network cabling. Good certification testers also typically support performance standards for premises fiber optic cabling, and have diagnostic capabilities for both copper and fiber network cabling.
ASD is a nationwide low voltage solution partner. By manufacturing and selling direct to the end user, ASD is able to bring value to our clients projects, while ensuring superior network performance. With a turnkey approach, ASD will design build your organization's next project.
This document provides a technical description of the CMA5000a Gigabit Ethernet application module. It can analyze traffic on 10/100/1000 Mbps optical and electrical Ethernet networks using its 2 optical and 2 electrical ports. Key features include RFC 2544 testing for installation and troubleshooting, non-intrusive network monitoring, IP jitter measurement, and generation of test reports. The document describes the module's monitoring, traffic generation, RFC 2544, and BERT testing functionality as well as its specifications and ordering information.
This document provides an overview of WiMAX standards and technology. It discusses the evolution of WiMAX standards, the role of the WiMAX Forum in promoting compatibility, and the growth forecast for the industry. It describes key aspects of WiMAX including available spectrum, features and advantages compared to other technologies, network architecture and profiles. The document provides details on WiMAX certification testing and requirements.
The document discusses advancements in network cabling standards and technology. It summarizes the evolution from Category 5 to Category 5e standards, and discusses the development of Category 6 standards. It then describes a proposed low-attenuation Category 6 cable called IBDN System 4800LX that shows improved bandwidth and crosstalk performance over existing standards in testing. The cable aims to help support future multi-gigabit applications by reducing insertion losses at high frequencies.
TMYTEK is a company that specializes in mmWave and 5G NR technology. They provide various products to support 5G NR development including their BBox beamforming kit, UD Box up/down converter, and individual mmWave components. Their BBox kit allows control of phase and amplitude for beamsteering experiments across multiple channels. The UD Box provides frequency conversion between mmWave 5G NR bands and intermediate frequencies to enable more cost-effective testing and development. TMYTEK aims to contribute to making internet access available everywhere through their mmWave technology and products.
1) The document provides information on TMYTEK's products for 5G NR including the BBox beamforming development kit, UD Box up/down converter, and Antenna-in-Package solutions.
2) The BBox kit includes components for phase and amplitude control like the ΦA Box, antenna arrays, switches, and software control interfaces. It is aimed to emulate base station and UE beamforming.
3) The UD Box provides frequency conversion between 5G NR bands and IF to enable more cost-effective testing and includes a built-in local oscillator.
The Importance of Handheld Optical Power Meters by DINTEK highlights the essential role these devices play in accurately measuring optical power in fiber optic networks. With user-friendly portability and precise readings, they ensure efficient network maintenance and troubleshooting for optimal performance and reliability. To know more, read the full PDF.
This document provides guidelines for certifying twisted-pair cabling for 10Gb/s Ethernet transmission, which requires testing for alien crosstalk (AXTalk). It outlines a two-phase certification process: 1) in-channel certification to test individual link parameters up to 500MHz, and 2) between-channel certification to measure AXTalk between links. AXTalk is measured using specialized test equipment connecting links as victim and disturber. Links most challenging for compliance, like longest or closest connectors, should be tested first.
The cable harness tester has an important role in bringing in the quality and reliability of electrical cable assemblies that are used in many industries, such as aerospace, automotive, defence, and manufacturing. This is one of the most important functions of cable harness assembly as it helps in finding defects, ensuring the connectivity is right, and testing the on-field performance of the harnesses.
The document discusses the need to properly test fiber optic installations to support new applications like Gigabit Ethernet and 10 Gigabit Ethernet. Generic cable standards are not sufficient and a tester needs to automatically check against application-specific limits. There are currently seven different sets of length and loss limits for variants of Gigabit Ethernet, and 10 Gigabit Ethernet will likely require many more sets of complex testing limits. A field tester should keep track of the different application test limits and produce a test report with pass/fail results for each network application and generic cable standards.
Jonathan Jew en Congreso Bicsi México 2015BICSI MX
Jonathan Jew, integrante del Comité Directivo de los grupos de creación de normas sobre Centros de Datos en ISO, BICSI, TIA, nos comparte los contenidos más actuales y tendencias en el tema.
1. CableTesterofChoice
Cable CertifierWire✗pert
The WireXpert is the first cable certifier with capability to certify the highest
performance cabling systems in enterprise networks and data centers. Cable
installers make significant gain in productivity with WireXpert‘s industry lea-
ding test speed and ease of use. With certification testing up to Class FA and
CAT8 copper cabling, as well as MPO, SM and MM fiber optic cabling, WireXpert
is ready for 40G and beyond. In fact, major cable vendors are using WireXpert
in their labs for qualifying CAT8 cabling systems under development.
4500
1st CAT 8 Cable Certifier
1st CAT 8 Cable Certifier
2. CableTesterofChoice
2
Wire✗pert 4500
Feature List
• First cable certification up to 2500 MHz to support
new TIA CAT 8 und ISO Class I and II draft standard
• Most advanced cable certification for all standards: Class D/E/EA
/FA
,
Category 5e/6/6A
, and the new draft CAT 8 as well as ISO draft
standards Class I and Class II
• Fastest Autotest in less than 9 Seconds
• Accuracy independently verified by ETL
• Exceeds ISO Level V*, IV and TIA Level IIIe Accuracy requirements
• Endorsed by over 20 cable companies worldwide
• Field upgradable with many options e.g. patchcord testing,
Industrial Ethernet, Class FA
• Perform extended Fiber certification for 850/1300 MM and
1310/1550 SM Fiber
• First to support MPO Fiber testing for data centers
• Advanced reporting and documentation
• The only certifier supporting all data center, premise cabling and
industrial ethernet requirements
* draft IEC61935-1 ed4
3. CableTesterofChoice
3
Easy to Use and ruggedized design
WireXpert comes with an intuitive touch sensitive user interface, featuring
bright color LCD screens designed for industrial, heavy duty usage. The Dual
Control System (DCS TM
) – featuring identical devices for remote and main
units – makes it really easy to operate the test cycles. Whether coordinated
by two technicians or only one, walking time between outlets is minimized.
Fast and simple for highest productivity
WireXpert completes CAT 6A
certification test in less than 9 seconds and
Class FA
testing in 15 seconds. It offers intuitive navigation through the
screens on the device, and generates professional reports through its PC
software ReportXpert.
Protects your Investment: Beyond 10G
If you are testing 10 Gb/s cabling, WireXpert is the clear choice. If you are
thinking beyond 10G, WireXpert is the only choice. Built on a future proof,
scalable measurement engine, WireXpert protects your investment in test
equipment as the data rates supported by the cabling systems increase.
WireXpert employs a novel measurement architecture that achieves extre-
mely wide bandwidth with superior measurement accuracy. Its unique RF
measurement engine exceeds level IV and level V requirements throughout
the easurement frequency range.
Proven Accuracy
WireXpert has been independently verified by
highly respected test laboratories such as ETL.
Vendor Approvals
Most leading cable manufacturers have exten-
sively tested WireXpert and have approved the
instrument for field certification and associated
warranties of their structured cabling solutions.
Laboratory testing and comparisons
against vector analyzers have proven
that WireXpert has excellent accuracy
and measurements correlate with labo-
ratory equipment. In fact, major cable
vendors are using WireXpert in their
labs for qualifying CAT8 cabling systems
under development.
A complete list of all endorsements
is available at www.psiberdata.com
4. CopperCablecertification
4
Testing Cabling Systems CAT6A
and Beyond
WireXpert, with its industry leading measurement
performance, provides adapters for testing cabling
systems with higher performance than CAT6A
(500MHz).
For Class FA
cabling, testing is performed over full
standards defined frequency range from 1MHz through
1000MHz. Both TERA and GG45/ARJ45 interfaces are
available through WireXpert test adapters. Both chan-
nel and permanent link testing are supported. Adapters
are also available for testing CAT7A
patch-cords.
With measurement bandwidth exceeding 2000MHz,
WireXpert is capable of testing CAT8 cabling once the
standard is approved.
Wire✗pert 4500
Kit Includes Quantity
WireXpert Handheld units 2
Li-Ion Batteries 2
Stylus with Cords 2
Display Protection Covers 2
CAT 6A
Permanent Link Interface Adapters 2
CAT 6A
Permanent Link Test Cords 2
CAT 6A
Channel Adapters 2
USB Thumb Drive incl. Manual and Software 1
Talk Head Sets 2
AC Power Adapters 2
Country Specific Power Cord 2
Calibration Certificate 1
Carrying Case 1
Quick Reference Guide 1
5. CopperCableTesting
5
CopperCablecertification
Copper patch-cord testing with WireXpert
WireXpert offers an efficient way for quickly identifying and
recording the performance of patch-cords. With its fast and
accurate dual-ended testing, WireXpert‘s patch-cord test kits are
suitable for both manufacturing testing, as well as for incoming
inspection at end user premises.
WireXpert patch-cord test kits are available for testing CAT5e,
CAT6, CAT6A
, and CAT7/7A
patch-cords.
Industrial Ethernet cabling test
WireXpert‘s industrial Ethernet cabling test solution comprise of
M12 adapter kits. Both channel and permanent link configura-
tions with M12 industrial Ethernet connector are supported.
Industrial Ethernet kit with X-Coded M12 interface is also availa-
ble, making it possible to effectively test 10-Gig ready industrial
Ethernet cables.
Coax cable test
With coax test adapters,WireXpert supports testing of coaxial
cables for attenuation and return loss over a wide frequency band.
Alien Cross-talk
Alien crosstalk testing with WireXpert is performed using two
WireXpert sets. This means, there are no special adapters and no
need for carrying a laptop to the field for data analysis.
Laboratory Testing of Cables and components
WireXpert features extremely versatile adapters that enable the
lab technicians to replace expensive Vector Network Analyser with
WireXpert for performing differential S-parameter measurements
over 1MHz to 2,500MHz. Contact Psiber for more information on
these adapters.
Adapters Accessories for Copper Cable Certification
Adapters Accessories
Class EA
/ CAT6A
channel adapter kit
Pair of Permanent link cerification test cord for Class EA
/ CAT6A
and below (wearable part)
Kit for Class F and Class FA
TERA permanent link testing
Kit for Class FA
channel adapters with GG45/ARJ45 interface
Pair of coax adapters
Pair of CAT6A
patch cord adapters
Hard carrying case
Pair of nylon covers
For more options and accessories, please contact your Psiber Reseller.
6. FibercableCertification
6
WireXpert Optical Loss Test Kit
Modern network infrastructure involves instal-
ling both copper and fiber cabling within the
same premises. With the increasing demand for
bandwidth, certification plays a crucial role for
guaranteed data rates. Certification requires cha-
racterizing each fiber link to the desired standards
in measuring the insertion loss (attenuation) and
length of the fiber link. WireXpert provides you
with a fast, easy and accurate way of determining
the pass/fail criteria of the installation across ISO/
IEC or TIA standards.
• Performs autotest in less than 6 seconds
• Perform Tier 1 Certification for ISO/IEC and
TIA 568 C.3 Standards
• Measures and certifies length and loss for
single-mode at 1310nm and 1550 nm and
multi-mode cabling at 850nm and 1300nm
• Seamlessly integrates copper and fiber reports.
Generate professional warranty and certification test reports
• Double your productivity with DCSTM
technology by using your remote
unit as an independent optical certifier
Test Limits and Link validations
WireXpert optical loss test kit supports all the latest standards from TIA 568
C.3 to ISO 14763-3 standard. By automatically calculating the loss budgets
the WireXpert saves you the trouble of having to perform cumbersome
calculations and plugging in data for individual connectors and splices for
different standards. In certain scenarios where end-to-end loss is required
to be measured and documented, WireXpert provides with a customized
link validation workflow that lets you define end-to-end loss and perform
the certification.
Multi-mode and Single-mode kits
WireXpert optical loss kits are available for both Multi-mode
and Single-mode fiber networks. The modular solution allows
testing both types of networks on the same WireXpert unit
with interchangeable adapters. Each module lets you per-
form very accurate loss and length measurements at two
wavelengths meeting all the various standard requirements.
Both kits support certification of horizontal as well as back-
bone cabling by supporting dual wavelength measurement
on each adapter.
Wire✗pert 4500
7. ReportingFibercableCertification
7
MPO Testing Kit
WireXpert‘s versatile MPO testing solution enables data center IT managers to
get quick and accurate assessment of the quality of MPO links. Additionally, it
helps in performing incoming inspection of MPO components like cassettes.
The key feature of this solution is a 5-second Autotest that includes a detection
of fiber connection map and measurement of loss on each channel.
WireXpert cable certification tester enables testing of MPO/MTP links when
used with MPO adapters. A typical test setup consists of WireXpert local unit
with MPO power meter adapter, and the remote unit with MPO light source
adapter attached. Alternatively, a multimode fiber adapter can be attached to
WireXpert local unit for testing individual fibers in MPO link.
This solution provides a fast and accurate measurement of MPO link loss and
testing against user configured limit.
Professional ReportXpert
Manage your results and generate professional reports and warranty
documents. The WireXpert certification solution includes ReportXpert, a
PC based reporting software that produces full color graphical reports in
summary or detail.
Adapters Accessories for Fiber Cable Certification
Adapters Accessories
Multimode Fiber adapter kit
Singlemode Fiber adapter kit
MPO test kit
For more options and accessories, please contact your Psiber Reseller.