For more than a decade, cabling installation and maintenance technicians have relied on MicroScanner to verify terminations and troubleshoot continuity.
faults.
The document summarizes a copper and fiber technician's kit that includes tools for testing and troubleshooting both copper and fiber networks. The kit contains a MicroScanner2 for copper cable testing, a SimpliFiber Pro singlemode light source for fiber inspection and testing, and other tools for fiber endface inspection and fault location. The kit provides a robust set of tools to help network technicians efficiently manage hybrid copper and fiber networks.
The AP 6562 is an outdoor dual radio 802.11a/b/g/n wireless access point designed to extend Wi-Fi coverage to outdoor areas in a cost-effective way. It can handle increasing numbers of wireless devices and bandwidth-heavy applications. It features dual radios, superior receive and transmit performance, PoE support, and mesh networking capabilities to wirelessly connect to other access points. The access point provides security, quality of service, and survivability features through its WING 5 architecture.
The document describes the WireXpert cable certifier. It can certify the highest performance cabling systems, including CAT8 copper and MPO fiber optic cabling. Cable installers can be more productive with its fast test speeds. It is accurate, endorsed by major cable vendors, and future-proof to support speeds beyond 10Gbps.
This presentation by Westermo’s Technical Lead Engineer Dakota Diehl is an integral part of the Westermo webinar held on May 28th 2020, covering best practices for computer networking solutions for energy systems. During this presentation, protocols and certifications for the energy market are discussed as well as data communication solutions for different energy segments - from generation to supply.
Tune in the webinar session here: https://www.westermo.com/news-and-events/webinars/computer-networking-solutions-for-energy-systems
The AP 6532 is a dual-radio 802.11n access point that offers high throughput and WiNG 5 intelligence. It can serve as a virtual controller for up to 23 access points. Its second radio can be used for access or troubleshooting. The access point automatically optimizes power and channel selection for high quality connectivity. It is designed to optimize network availability and allow seamless roaming. It provides security including firewall, AAA RADIUS, and wireless IPS capabilities. The access point supports voice, location services, hotspots and guest access out of the box.
Integrating Speed and Flexibility Isolating Industrial ControlSilicon Labs
We will introduce targeted applications within the Industrial Automation market and focus on Programmable Logic Controllers (PLC) and Factory Automation. We will discuss where isolation is used in a PLC input module and the high level of integration and features of the Si838x, including user programmable de-bounce. We’ll dive into details about the Si838x input thresholds and how to calculate resistor network values to scale any system voltage to be compliant with IEC 61131-2 types 1, 2, and 3.
To watch the full on-demand webinar: http://bit.ly/2fxJXd1
The AP 6532 is a high performance dual radio 802.11n access point that offers higher throughput along with WiNG 5's direct forwarding, security, QoS services, and site survivability. It can serve as a virtual controller and coordinate up to 24 neighboring access points. It automatically optimizes power and channel selection for high quality access and mobility. It is designed to optimize network availability and continue running even if the connection to a local or remote controller is interrupted. It supports features like voice, locationing, hotspots, guest access, and device and network acceleration.
The document summarizes a copper and fiber technician's kit that includes tools for testing and troubleshooting both copper and fiber networks. The kit contains a MicroScanner2 for copper cable testing, a SimpliFiber Pro singlemode light source for fiber inspection and testing, and other tools for fiber endface inspection and fault location. The kit provides a robust set of tools to help network technicians efficiently manage hybrid copper and fiber networks.
The AP 6562 is an outdoor dual radio 802.11a/b/g/n wireless access point designed to extend Wi-Fi coverage to outdoor areas in a cost-effective way. It can handle increasing numbers of wireless devices and bandwidth-heavy applications. It features dual radios, superior receive and transmit performance, PoE support, and mesh networking capabilities to wirelessly connect to other access points. The access point provides security, quality of service, and survivability features through its WING 5 architecture.
The document describes the WireXpert cable certifier. It can certify the highest performance cabling systems, including CAT8 copper and MPO fiber optic cabling. Cable installers can be more productive with its fast test speeds. It is accurate, endorsed by major cable vendors, and future-proof to support speeds beyond 10Gbps.
This presentation by Westermo’s Technical Lead Engineer Dakota Diehl is an integral part of the Westermo webinar held on May 28th 2020, covering best practices for computer networking solutions for energy systems. During this presentation, protocols and certifications for the energy market are discussed as well as data communication solutions for different energy segments - from generation to supply.
Tune in the webinar session here: https://www.westermo.com/news-and-events/webinars/computer-networking-solutions-for-energy-systems
The AP 6532 is a dual-radio 802.11n access point that offers high throughput and WiNG 5 intelligence. It can serve as a virtual controller for up to 23 access points. Its second radio can be used for access or troubleshooting. The access point automatically optimizes power and channel selection for high quality connectivity. It is designed to optimize network availability and allow seamless roaming. It provides security including firewall, AAA RADIUS, and wireless IPS capabilities. The access point supports voice, location services, hotspots and guest access out of the box.
Integrating Speed and Flexibility Isolating Industrial ControlSilicon Labs
We will introduce targeted applications within the Industrial Automation market and focus on Programmable Logic Controllers (PLC) and Factory Automation. We will discuss where isolation is used in a PLC input module and the high level of integration and features of the Si838x, including user programmable de-bounce. We’ll dive into details about the Si838x input thresholds and how to calculate resistor network values to scale any system voltage to be compliant with IEC 61131-2 types 1, 2, and 3.
To watch the full on-demand webinar: http://bit.ly/2fxJXd1
The AP 6532 is a high performance dual radio 802.11n access point that offers higher throughput along with WiNG 5's direct forwarding, security, QoS services, and site survivability. It can serve as a virtual controller and coordinate up to 24 neighboring access points. It automatically optimizes power and channel selection for high quality access and mobility. It is designed to optimize network availability and continue running even if the connection to a local or remote controller is interrupted. It supports features like voice, locationing, hotspots, guest access, and device and network acceleration.
Frank Ballestero has over 15 years of experience managing wireless construction projects. He has coordinated RF, power, and tower crews for antenna upgrades on various cellular networks. He is knowledgeable about radio equipment, fiber installation, and safety protocols. Ballestero holds certifications in fiber optics, hazard training, and defensive driving. He has worked as a construction manager and project manager for various telecom companies, managing site builds and modifications.
Car net testresults_may2015_presentation_finalwrpru
The Croatian Academic and Research Network (CARNet) conducted independent testing of 19 access point models from 8 vendors in a classroom environment. Under increasing loads of 13, 23, 36, 60 clients, Ruckus access points consistently outperformed competitors, achieving throughput gains of 22-76%. Even Ruckus' mid-range models surpassed high-end models from other vendors. The testing demonstrated Ruckus' ability to support growing network demands in dense, interference-prone environments.
Peter Rafferty is a highly motivated telecommunications engineer with 18 years of experience in the military and qualifications in communications cabling, fiber optics, and copper cabling installation and testing. He has skills in risk assessment, maintenance and fault finding of various communication systems. His career history includes roles as a Communications Supervisor and leading a detachment in the military, and he is currently working as a security guard.
The AP 6522 is a dual-radio 802.11a/b/g/n wireless access point designed for small offices and retail locations. It can handle increasing numbers of Wi-Fi devices and bandwidth-heavy applications connecting to the wireless network. With its WiNG 5 intelligence, the AP 6522 offers high throughput, security, QoS services, and site survivability without requiring a controller. It can also serve as a virtual controller for up to 24 neighboring access points.
The AP 6522 is a dual-radio 802.11a/b/g/n wireless access point designed for small offices and retail locations. It does not require a controller and can serve as a virtual controller for up to 24 access points. It offers high throughput, security, QoS, and site survivability through its embedded WiNG 5 intelligence. The AP 6522 supports mesh networking and can extend wireless coverage to areas where ethernet cabling is impractical. It provides fast and easy deployment, security, and optimization of wireless channels and power.
TestEquipment is a leading company of Iran. They are the distributor of test equipment used in telecommunication industry and IT. They are Exclusive dealer of Fluke Networks and Anritsu, Spirent, Rhode & Schwarz, Empirix, JDSU, EXFO, Agilent Technologies.
They provide and supply all types of equipment that used in testing. They deals in product like IP Network testing, signals analysis, sources, generators, radio network, fiber network etc...
The document discusses the evolution of Power over Ethernet (PoE) standards and applications. It describes how PoE has increased supported power levels over time from IEEE 802.3af to 802.3at to the upcoming 4-Pair PoE standard 802.3bt, allowing for nearly 100W of power per cable. It also summarizes recommendations from standards bodies on cabling installation for high power PoE, noting that conditions like ventilation and record keeping are important to ensure cabling can safely support the required power levels.
Allan Eager is seeking employment as a signalling technician. He has over 15 years of experience installing, maintaining, and testing various electrical and fiber optic systems for railway signaling and other industrial applications. His qualifications include 17th edition electrician, fiber splicing, and railway safety certifications.
This document contains the resume of Mahendra Bagria. It lists his contact information, technical skills which include networking and security device configuration, strengths in people management and problem solving. It then details his work experience from 2012 to 2006 in roles such as IT Manager, Network Engineer, and Hardware Network Engineer where he installed and managed networking, security, wireless and VOIP equipment for various clients. It also lists his educational qualifications and personal details.
Get to know the new generation of robust and reliable industrial Ethernet switches and software solutions by Westermo, including Lynx 5512, Redfox 5528 and WeOS (Westermo Operating System).
This presentation is an integral part of the Westermo webinar introducing the next generation switch platform: https://www.westermo.com/news-and-events/webinars/the-next-generation-industrial-switch-platform
Recently, a new phenomenon has appeared during the search for the causes of network failures. It has been noted data communication issues are becoming more frequent in situations where conventional network analysers do not reveal any weak points.
It was the investigation of shield currents on industrial data communication lines that prompted the usual diagnostic approach to take a completely new turn. It soon became clear that the bus itself was in perfect condition, but was being affected by external influences that are generally referred to as “EMC interference“. Further extensive measurements, both in the bonding system and in the shielding connections of bus lines, revealed an association between high leakage currents (mostly of higher frequency) and bus failures.
This presentation will explain the theory behind the measurements, the tools used to perform them and will provide limits against which all industrial networks should be checked against.
This curriculum vitae summarizes the qualifications and experience of Mohammad Saleem. He has a Bachelor of Engineering degree in Electronics and Communications and over 2 years of experience in telecommunications working on projects for BSNL, Aircel, Vodafone and Bharti Airtel. His current role is as a Technical Trainer for Vodafone's 3G/4G network project in Karnataka, where he trains partner teams. Previously he worked as an LTE Project Coordinator for Bharti Airtel in Karnataka, overseeing rollout, and has skills in technologies like GSM, UMTS, LTE and equipment from Nokia, ZTE and Huawei.
This document describes various test solutions and tools for certifying and monitoring data center infrastructure, including fiber and copper certification, optical spectrum analysis, and network and application monitoring. It lists products for tier 1 and tier 2 fiber certification, essential fiber tools like microscope inspection and optical power measurement, copper certification, and an observer platform for network and application monitoring across layers 2 through 7.
Case Study – PROFIBUS Network, Waveforms, Network screen currents, EMC measurement and Network screen currents
Control Specialists Ltd. were asked to provide site support on a 6-year old PROFIBUS installation.
The installation consisted of several separate PROFIBUS networks all of which had been suffering from intermittent network failures since the network had been commissioned.
The engineering staff of the client already had a portable PROFIBUS analyser and a permanent monitor but had been unable to identify the cause of the problems.
Farhan Ghafoor is seeking a challenging position in a prestigious organization where he can contribute his process management and service delivery skills. He has over 6 years of experience managing telecommunications projects in Saudi Arabia. He holds a B.S. in Telecommunication and Networks from COMSATS University of Science and Technology.
Ensure continued reliable operation of industrial systems that are using legacy serial (RS-232 and RS-485) modem connections and how to migrate to a future proof IP based solution.
This presentation by Westermo’s Technical Director Ray Lock is an integral part of the Westermo webinar covering Serial to IP migration: https://www.westermo.com/news-and-events/webinars/serial-modem-to-ip-broadband-migration
The AP 6532 is a dual-radio 802.11n access point that offers high throughput and WiNG 5 intelligence. It can serve as a virtual controller for up to 23 access points. The second radio can be used for access or troubleshooting. It features automatic channel and power optimization, high reliability through signal sensing and boosting, gap-free security including firewall and IPS capabilities. It provides full 802.11n performance using standard PoE and supports fast secure roaming, voice, location services, and guest access.
The AP 6532 is a dual-radio 802.11n access point that offers high throughput and WiNG 5 intelligence. It can serve as a virtual controller for up to 24 access points. It features automatic channel and power optimization, high reliability through signal sensing and pre-emptive roaming, and gap-free security including firewalls and wireless IPS. It is designed to provide full performance using standard PoE and supports fast, secure roaming and device mobility.
The MaxTester 635 is a next-generation tool for testing broadband deployments over copper wires. It supports testing of ADSL2+, VDSL2, and Ethernet networks. Key features include automated testing of DSL services, copper line quality, IPTV, and VoIP. Test results are displayed clearly on a large, easy-to-use touchscreen. The MaxTester 635 simplifies installation and troubleshooting of multi-play networks.
The NetWave NWK3 and NWK4 are pre-configured point-to-point commercial grade wireless Ethernet transmission kits that allow a single Ethernet data stream to be transmitted between a client remote location and an access point or head end. Key features include support for up to 95Mbps throughput, passive PoE support, WPA2 encryption, antenna alignment tools, and a lifetime warranty.
The Series 70: ePanel-1 is a Wall-Mounted Power Panel is designed to make the most of available critical facility space. Available with 42-circuit breakers.
Designed and quality built by LayerZero Power Systems in Aurora, Ohio USA.
Frank Ballestero has over 15 years of experience managing wireless construction projects. He has coordinated RF, power, and tower crews for antenna upgrades on various cellular networks. He is knowledgeable about radio equipment, fiber installation, and safety protocols. Ballestero holds certifications in fiber optics, hazard training, and defensive driving. He has worked as a construction manager and project manager for various telecom companies, managing site builds and modifications.
Car net testresults_may2015_presentation_finalwrpru
The Croatian Academic and Research Network (CARNet) conducted independent testing of 19 access point models from 8 vendors in a classroom environment. Under increasing loads of 13, 23, 36, 60 clients, Ruckus access points consistently outperformed competitors, achieving throughput gains of 22-76%. Even Ruckus' mid-range models surpassed high-end models from other vendors. The testing demonstrated Ruckus' ability to support growing network demands in dense, interference-prone environments.
Peter Rafferty is a highly motivated telecommunications engineer with 18 years of experience in the military and qualifications in communications cabling, fiber optics, and copper cabling installation and testing. He has skills in risk assessment, maintenance and fault finding of various communication systems. His career history includes roles as a Communications Supervisor and leading a detachment in the military, and he is currently working as a security guard.
The AP 6522 is a dual-radio 802.11a/b/g/n wireless access point designed for small offices and retail locations. It can handle increasing numbers of Wi-Fi devices and bandwidth-heavy applications connecting to the wireless network. With its WiNG 5 intelligence, the AP 6522 offers high throughput, security, QoS services, and site survivability without requiring a controller. It can also serve as a virtual controller for up to 24 neighboring access points.
The AP 6522 is a dual-radio 802.11a/b/g/n wireless access point designed for small offices and retail locations. It does not require a controller and can serve as a virtual controller for up to 24 access points. It offers high throughput, security, QoS, and site survivability through its embedded WiNG 5 intelligence. The AP 6522 supports mesh networking and can extend wireless coverage to areas where ethernet cabling is impractical. It provides fast and easy deployment, security, and optimization of wireless channels and power.
TestEquipment is a leading company of Iran. They are the distributor of test equipment used in telecommunication industry and IT. They are Exclusive dealer of Fluke Networks and Anritsu, Spirent, Rhode & Schwarz, Empirix, JDSU, EXFO, Agilent Technologies.
They provide and supply all types of equipment that used in testing. They deals in product like IP Network testing, signals analysis, sources, generators, radio network, fiber network etc...
The document discusses the evolution of Power over Ethernet (PoE) standards and applications. It describes how PoE has increased supported power levels over time from IEEE 802.3af to 802.3at to the upcoming 4-Pair PoE standard 802.3bt, allowing for nearly 100W of power per cable. It also summarizes recommendations from standards bodies on cabling installation for high power PoE, noting that conditions like ventilation and record keeping are important to ensure cabling can safely support the required power levels.
Allan Eager is seeking employment as a signalling technician. He has over 15 years of experience installing, maintaining, and testing various electrical and fiber optic systems for railway signaling and other industrial applications. His qualifications include 17th edition electrician, fiber splicing, and railway safety certifications.
This document contains the resume of Mahendra Bagria. It lists his contact information, technical skills which include networking and security device configuration, strengths in people management and problem solving. It then details his work experience from 2012 to 2006 in roles such as IT Manager, Network Engineer, and Hardware Network Engineer where he installed and managed networking, security, wireless and VOIP equipment for various clients. It also lists his educational qualifications and personal details.
Get to know the new generation of robust and reliable industrial Ethernet switches and software solutions by Westermo, including Lynx 5512, Redfox 5528 and WeOS (Westermo Operating System).
This presentation is an integral part of the Westermo webinar introducing the next generation switch platform: https://www.westermo.com/news-and-events/webinars/the-next-generation-industrial-switch-platform
Recently, a new phenomenon has appeared during the search for the causes of network failures. It has been noted data communication issues are becoming more frequent in situations where conventional network analysers do not reveal any weak points.
It was the investigation of shield currents on industrial data communication lines that prompted the usual diagnostic approach to take a completely new turn. It soon became clear that the bus itself was in perfect condition, but was being affected by external influences that are generally referred to as “EMC interference“. Further extensive measurements, both in the bonding system and in the shielding connections of bus lines, revealed an association between high leakage currents (mostly of higher frequency) and bus failures.
This presentation will explain the theory behind the measurements, the tools used to perform them and will provide limits against which all industrial networks should be checked against.
This curriculum vitae summarizes the qualifications and experience of Mohammad Saleem. He has a Bachelor of Engineering degree in Electronics and Communications and over 2 years of experience in telecommunications working on projects for BSNL, Aircel, Vodafone and Bharti Airtel. His current role is as a Technical Trainer for Vodafone's 3G/4G network project in Karnataka, where he trains partner teams. Previously he worked as an LTE Project Coordinator for Bharti Airtel in Karnataka, overseeing rollout, and has skills in technologies like GSM, UMTS, LTE and equipment from Nokia, ZTE and Huawei.
This document describes various test solutions and tools for certifying and monitoring data center infrastructure, including fiber and copper certification, optical spectrum analysis, and network and application monitoring. It lists products for tier 1 and tier 2 fiber certification, essential fiber tools like microscope inspection and optical power measurement, copper certification, and an observer platform for network and application monitoring across layers 2 through 7.
Case Study – PROFIBUS Network, Waveforms, Network screen currents, EMC measurement and Network screen currents
Control Specialists Ltd. were asked to provide site support on a 6-year old PROFIBUS installation.
The installation consisted of several separate PROFIBUS networks all of which had been suffering from intermittent network failures since the network had been commissioned.
The engineering staff of the client already had a portable PROFIBUS analyser and a permanent monitor but had been unable to identify the cause of the problems.
Farhan Ghafoor is seeking a challenging position in a prestigious organization where he can contribute his process management and service delivery skills. He has over 6 years of experience managing telecommunications projects in Saudi Arabia. He holds a B.S. in Telecommunication and Networks from COMSATS University of Science and Technology.
Ensure continued reliable operation of industrial systems that are using legacy serial (RS-232 and RS-485) modem connections and how to migrate to a future proof IP based solution.
This presentation by Westermo’s Technical Director Ray Lock is an integral part of the Westermo webinar covering Serial to IP migration: https://www.westermo.com/news-and-events/webinars/serial-modem-to-ip-broadband-migration
The AP 6532 is a dual-radio 802.11n access point that offers high throughput and WiNG 5 intelligence. It can serve as a virtual controller for up to 23 access points. The second radio can be used for access or troubleshooting. It features automatic channel and power optimization, high reliability through signal sensing and boosting, gap-free security including firewall and IPS capabilities. It provides full 802.11n performance using standard PoE and supports fast secure roaming, voice, location services, and guest access.
The AP 6532 is a dual-radio 802.11n access point that offers high throughput and WiNG 5 intelligence. It can serve as a virtual controller for up to 24 access points. It features automatic channel and power optimization, high reliability through signal sensing and pre-emptive roaming, and gap-free security including firewalls and wireless IPS. It is designed to provide full performance using standard PoE and supports fast, secure roaming and device mobility.
The MaxTester 635 is a next-generation tool for testing broadband deployments over copper wires. It supports testing of ADSL2+, VDSL2, and Ethernet networks. Key features include automated testing of DSL services, copper line quality, IPTV, and VoIP. Test results are displayed clearly on a large, easy-to-use touchscreen. The MaxTester 635 simplifies installation and troubleshooting of multi-play networks.
The NetWave NWK3 and NWK4 are pre-configured point-to-point commercial grade wireless Ethernet transmission kits that allow a single Ethernet data stream to be transmitted between a client remote location and an access point or head end. Key features include support for up to 95Mbps throughput, passive PoE support, WPA2 encryption, antenna alignment tools, and a lifetime warranty.
The Series 70: ePanel-1 is a Wall-Mounted Power Panel is designed to make the most of available critical facility space. Available with 42-circuit breakers.
Designed and quality built by LayerZero Power Systems in Aurora, Ohio USA.
The document describes the NetWave NWK1/NWK2 industrially hardened point-to-point wireless Ethernet kit. The kit allows for Ethernet connections between remote locations up to 2 miles or 2 kilometers apart using a pre-configured access point and client units for quick setup. The units support up to 95Mbps throughput, have an easy to read LED array for status, and can be powered using Power over Ethernet or an included power injection module.
The document describes the PowerScan PM8300 series of cordless laser scanners from Datalogic ADC. It has 3 models - a basic model, an intermediate model with a display and 3-key keypad, and an ultimate model with a full keyboard. All models use Datalogic's STAR Cordless System for wireless communication and feature green read lights and a patented 'Green Spot' for feedback. The scanners are designed to be rugged, ergonomic, and able to operate in a wide range of temperatures. They offer multi-interface connectivity and can read 1D and stacked barcodes at distances from a few centimeters to over 10 meters depending on code size.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
The AP 6521 is a versatile single radio 802.11a/b/g/n wireless access point that offers higher throughput, security, QoS services, and site survivability through its embedded WiNG 5 intelligence. It can serve as a virtual controller for up to 23 access points. The AP 6521 is designed to lower the cost of deploying and operating a secure, reliable wireless LAN through features like MIMO, security services, automatic channel and power optimization, and fast, easy deployment. It can also be used as a wireless intrusion prevention sensor for both 2.4GHz and 5GHz bands.
The AP 6521 is a versatile single radio 802.11a/b/g/n wireless access point that offers higher throughput, security, QoS services, and site survivability through its embedded WiNG 5 intelligence. It can serve as a virtual controller for up to 23 access points. The AP 6521 is designed to lower the cost of deploying and operating a secure, reliable wireless LAN through features like MIMO, security services, automatic channel and power optimization, and fast, easy deployment. It can also be used as a wireless intrusion prevention sensor for both 2.4GHz and 5GHz bands.
The AP 6521 is a versatile single radio 802.11a/b/g/n wireless access point that offers higher throughput, security, QoS services, and site survivability through its embedded WiNG 5 intelligence. It can serve as a virtual controller for up to 23 access points. The AP 6521 is designed to lower the cost of deploying and operating a secure, reliable wireless LAN through features like MIMO, security firewalls, and automatic channel and power optimization. It provides fast and easy deployment through automatic configuration and firmware downloads from the wireless controller.
JTOPTICS® 25GBASE SR 100m SFP28 optical transceiver, designed as a high-performance module for short-range data communication and interconnect applications, operating at 25.78125 Gbps. This module demonstrates optimal performance up to 70 m using OM3 fiber or 100 m using OM4 fiber. Tailored for multimode fiber systems, it utilizes a nominal wavelength of 850nm. With its low power consumption and high-speed capabilities, this 25G transceiver is well-suited for applications in 25G Ethernet, telecommunications, and data centers.
Key Features:
1. Hot-pluggable SFP28 form factor for convenient installation.
2. Supports a 25Gbps data rate, ensuring high-speed data transmission.
3. Maximum link length of 70m over OM3 and 100m over OM4 multimode fiber.
4. Utilizes an 850nm VCSEL laser and PIN photodetector for efficient operation.
5. Internal Clock and Data Recovery (CDR) on both Transmitter and Receiver channels for enhanced performance.
6. Equipped with a duplex LC receptacle for streamlined connectivity.
7. Operates on a single 3.3V power supply for simplified power management.
8. Power dissipation is less than 1W, contributing to energy efficiency.
9. Digital diagnostics functions are accessible via the I2C interface.
10. RoHS 6 compliant, demonstrating adherence to environmental standards.
11. Commercial case temperature range: 0°C to 70°C, suitable for various operating environments.
Wirexpert 4500 es un certificador de cable utpCSITEC PERU SAC
The WireXpert is a cable certifier that can test the highest performance copper and fiber cabling systems. It offers the fastest testing speeds on the market with full certification of CAT8 copper and MPO fiber in under 15 seconds. The WireXpert has a future-proof design that ensures accuracy as network speeds increase beyond 10Gbps. It is the only cable certifier approved by major cable vendors for qualifying and certifying the latest cabling standards.
EnGenius Technologies is a leading manufacturer of long-range wireless LAN products headquartered in Taiwan with over $500 million in annual sales. They produce a variety of high-power wireless devices including access points, bridges, and adapters with transmit powers ranging from 100mW to 400mW, allowing connectivity at distances up to 3-5 miles. EnGenius solutions are designed for value-added resellers, systems integrators, and wireless internet service providers to build cost-effective, enterprise-class wireless networks.
Pinpoint the leading causes of downtime with LinkIQ Cable and Network TesterTranscat
The network is down and you’ll likely have to take it apart, only to find out that the source of the problem is a cabling issue. Since 40% of downtime is caused by issues such as bad connectors, broken cables, and excessive cable length, this new tester is a simple way to quickly identify the source of network downtime and quickly get your systems up and running.
Similar to Micro Scanner2 - Raising Cable Verification to a Higher Power (20)
Versiv Cabling Certification System- Everything you need to certify, manage and report on your cable installation projects. Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection.
Fluke Networks is the worldwide leader in certification, troubleshooting, and installation tools for professionals who install and maintain critical network cabling infrastructure.
The Evolution of Test Sets in Telecom HistoryFluke Networks
Fluke Networks is the worldwide leader in certification, troubleshooting, and installation tools for professionals who install and maintain critical network cabling infrastructure.
The document describes a voltage detector that detects AC and DC voltages through a long-life carbide tip. To use it, the user simply places the tip on an object, presses the trigger, and observes the LEDs - green means no voltage, red flashing means dangerous voltage is present. It is compact, lightweight, and easy to use to test potentially dangerous objects like electrical equipment to avoid electrical shock. It detects voltages as low as 50V AC or 6V DC and protects users from up to 20,000V AC or 2,000V DC.
Visi fault™ visual fault locator. Industrial-strength fiber tracing, verification and fault location tool.
Bright red visible laser light source
• Accelerates end-to-end fiber
continuity checks
• Speeds fiber tracing and identification
• Simplifies fiber polarity verification
• Aids in location of fiber faults including
tight bends, breaks and bad connectors
The TS100 Cable Fault Finder is a tool that helps technicians quickly find and locate cable faults from one end of the cable. It functions as a fault locator, cable manager, and tone generator. It can instantly measure the distance to open or short circuits in cables up to 3,000 feet. The unit identifies specific cable pairs using a patented tone generator and detects high voltages on cables. It has a large LED screen, simple menu, and can be used when moisture is present, allowing technicians to efficiently test and manage cables.
TS52 PRO LCD Test Set easy-to-use unit comes with all the features that make a technician more productive, including a crystal clear LCD (liquid crystal display) with backlight, caller-id,
a high-fidelity, two-way hands-free amplified speakerphone,
speed dialing, a low battery warning indicator and
a rugged oversized locking belt clip for universal needs.
High and low voltage lockout
Low/high voltage indication digital read out
Low current (mA) indication digital read out
Overvoltage and overcurrent protection
Selectable flash and pause duration
Selectable timeouts to save battery
Speed dial (10 memories, 23 digits each)
Polarity indication in talk andmonitor mode
Battery level indicator
Battery included
Central office 346A linecord plug included
Belt clip included
The TS54 TDR is perfect for voice, data and video professionals and communication service provider technicians who need a best-in-class test set combined with a powerful TDR and toner. Buying the TS54 TDR means you no longer need to carry a separate TDR, toner, pair identifier and test set.
The Pro3000 Analog Tone and Probe are your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone™ technology.
Pocket Toner connects to any voice, data, or video cable to detect open/short circuits, continuity, AC/DC voltage* and dial tone* all while protecting up to 52 volts.
Pocket Toner® NX8 Deluxe Kit quickly and easily test coax, telephone, home theater, audio, video, security and fire cables for continuity, AC and DC voltage, shorts, opens and 50-75 Ω termination—8x faster with 8 ID caps.
PTNX8 Cable and Telephone is the most popular kit used for
“Triple Play” installations. This kit contains all the essential
adapters for identifying and testing telephone and TV cables.
Quickly and easily test coax and telephone cables for continuity, AC and DC voltage, shorts, opens and 50-75 Ω termination all in a single, versatile kit.
Pocket Toner® NX8 Cable Kit quickly and easily test coax and telephone cables for continuity, AC and DC voltage, shorts, opens and 50-75 Ω termination—8x faster, all in a single, versatile kit.
Pocket Toner® NX2 Deluxe Kit quickly and easily test coax, telephone, home theater, audio, video, security and fire cables for continuity, AC and DC voltage, shorts, opens and 50-75 Ω termination.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
CAKE: Sharing Slices of Confidential Data on BlockchainClaudio Di Ciccio
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdfTechgropse Pvt.Ltd.
In this blog post, we'll delve into the intersection of AI and app development in Saudi Arabia, focusing on the food delivery sector. We'll explore how AI is revolutionizing the way Saudi consumers order food, how restaurants manage their operations, and how delivery partners navigate the bustling streets of cities like Riyadh, Jeddah, and Dammam. Through real-world case studies, we'll showcase how leading Saudi food delivery apps are leveraging AI to redefine convenience, personalization, and efficiency.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Micro Scanner2 - Raising Cable Verification to a Higher Power
1. Technical Data
M i c r o S c a n n e r 2 C a b l e Ve r i f i e r
Ra i sing cable verification to a higher power
High power vision into voice/data/video cabling
For more than a decade, cabling
installation and maintenance technicians
have relied on MicroScanner to verify
terminations and troubleshoot continuity
faults. A lot has changed in the cabling
world since the original MicroScanner was
introduced. Industry economics require
that installations be done fast and
accurately with no callbacks. And converg-
ing voice, data, and video technologies
have given rise to new requirements for
service testing and multimedia support.
MicroScanner2
recognizes these trends
and presents a much-needed revolution to
the way testing is done. It streamlines
every aspect of the verification job.
From its time-saving user interface and
integrated multimedia support to its
expanded service detection capabilities,
MicroScanner2
gives technicians the power
to perform their jobs faster and more
accurately than ever.
High power vision to verify voice/data/
video cabling and services. That’s Network
SuperVision.™ That’s Fluke Networks’
promise to you.
Reduce test time and user error
Yesterday’s cable verification testers force
users to toggle between different modes
(up to four) to view all test results. This not
only slows the test process, but also causes
user frustration and error. MicroScanner2
has
defied this convention by displaying key test
results – wiremap, pair lengths, distance to
fault, cable ID, and far-end devices – all on
one screen.
Eliminate awkward test adapters
Tired of losing or breaking all the adapters
needed for testing the various voice, data,
and video media types? MicroScanner2
makes
these adapters things of the past with built-
in RJ11, RJ45, and coax support. Both the
main unit and the far-end identifiers can be
used to test telephone jacks, Ethernet jacks,
and CATV outlets right out of the box.
Rule out service problems fast
Today’s communications technicians have
more problems to deal with than just the
cabling. They have to rule out a whole host
of cable and service issues before determin-
ing the cause of a connectivity problem. Is
there telephone voltage? What’s the polarity?
Is there a switch at the far end? Is PoE
available? MicroScanner2
gives technicians
high power vision to verify today’s most
common voice, data, and video services.
Locate elusive cables in seconds
MicroScanner2
features built-in IntelliTone
digital and analog toning to precisely locate
virtually any cable or wire pair, regardless of
work environment. Use digital mode to locate
high-grade data cabling (Cat 5e/6/6a) in
bundles, or at switches, patch panels, or wall
outlets. Or, use analog mode on voice-grade
cabling (Cat 3 and below), as well as coax,
security/alarm, and speaker wiring.
Repair or replace tools less often
With all the abuse you put your tools
through, you can’t afford for them to be
delicate. MicroScanner2
features a rubber
wrap-around holster that makes it the right
tool for even the toughest jobs. Toss it into
your toolbox. Drop it from a ladder. It can
handle it. Plus, it now comes standard with
a vinyl carry pouch for enhanced protection
and convenience.