The WireXpert is a cable certifier that can test the highest performance copper and fiber cabling systems. It offers the fastest testing speeds on the market with full certification of CAT8 copper and MPO fiber in under 15 seconds. The WireXpert has a future-proof design that ensures accuracy as network speeds increase beyond 10Gbps. It is the only cable certifier approved by major cable vendors for qualifying and certifying the latest cabling standards.
The document describes the WireXpert cable certifier. It can certify the highest performance cabling systems, including CAT8 copper and MPO fiber optic cabling. Cable installers can be more productive with its fast test speeds. It is accurate, endorsed by major cable vendors, and future-proof to support speeds beyond 10Gbps.
Principals of Low Resistance Testing Webinar with MeggerTranscat
During this webinar you will learn the following:
• What is considered a Low Resistance Test?
• When to measure Low Resistance
• Why measure Low Resistance?
• Benefits of Low Resistance Testing
• DLRO2 - Features and Key Characteristics
Pinpoint the leading causes of downtime with LinkIQ Cable and Network TesterTranscat
The network is down and you’ll likely have to take it apart, only to find out that the source of the problem is a cabling issue. Since 40% of downtime is caused by issues such as bad connectors, broken cables, and excessive cable length, this new tester is a simple way to quickly identify the source of network downtime and quickly get your systems up and running.
The document summarizes a stress test performed on several Wi-Fi access points from different vendors. The test aimed to determine each AP's breaking point under high client load and use of applications like video streaming. Ruckus' ZoneFlex 7982 AP had the highest average TCP throughput and lowest number of video transmission errors, performing best overall. The document attributes Ruckus' superior performance to its BeamFlex statistical optimization technology, which constantly selects the highest data rates for clients through antenna pattern selection and sampling of the environment.
The Basics of Automotive Ethernet Webinar Slidedeckteledynelecroy
Evolving from the BroadR-Reach standard, Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected vehicles of the future.
This session will focus on the fundamentals of the Automotive Ethernet ecosystem. It will include a brief history and evolution of the standard, and an overview of benefits of the new technology and the associated design challenges. We will conclude with an introduction into the test requirements and the analysis tools available to help troubleshoot and qualify designs.
Gigalight is an optical interconnection design innovator based in China. It has technology centers in Shenzhen and Wuhan for developing products like cloud and datacenter transceivers, active optical cables, and 400G transceivers. Gigalight has over 500 employees and annual revenue of $52 million. The company focuses on optical transceiver modules, active optical cables, MPO cabling, and solutions for datacenter, metro, broadcast, and 5G networks. Gigalight aims to be a one-stop supplier of optical network devices through its technological platforms and partnerships.
The document describes the WireXpert cable certifier. It can certify the highest performance cabling systems, including CAT8 copper and MPO fiber optic cabling. Cable installers can be more productive with its fast test speeds. It is accurate, endorsed by major cable vendors, and future-proof to support speeds beyond 10Gbps.
Principals of Low Resistance Testing Webinar with MeggerTranscat
During this webinar you will learn the following:
• What is considered a Low Resistance Test?
• When to measure Low Resistance
• Why measure Low Resistance?
• Benefits of Low Resistance Testing
• DLRO2 - Features and Key Characteristics
Pinpoint the leading causes of downtime with LinkIQ Cable and Network TesterTranscat
The network is down and you’ll likely have to take it apart, only to find out that the source of the problem is a cabling issue. Since 40% of downtime is caused by issues such as bad connectors, broken cables, and excessive cable length, this new tester is a simple way to quickly identify the source of network downtime and quickly get your systems up and running.
The document summarizes a stress test performed on several Wi-Fi access points from different vendors. The test aimed to determine each AP's breaking point under high client load and use of applications like video streaming. Ruckus' ZoneFlex 7982 AP had the highest average TCP throughput and lowest number of video transmission errors, performing best overall. The document attributes Ruckus' superior performance to its BeamFlex statistical optimization technology, which constantly selects the highest data rates for clients through antenna pattern selection and sampling of the environment.
The Basics of Automotive Ethernet Webinar Slidedeckteledynelecroy
Evolving from the BroadR-Reach standard, Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected vehicles of the future.
This session will focus on the fundamentals of the Automotive Ethernet ecosystem. It will include a brief history and evolution of the standard, and an overview of benefits of the new technology and the associated design challenges. We will conclude with an introduction into the test requirements and the analysis tools available to help troubleshoot and qualify designs.
Gigalight is an optical interconnection design innovator based in China. It has technology centers in Shenzhen and Wuhan for developing products like cloud and datacenter transceivers, active optical cables, and 400G transceivers. Gigalight has over 500 employees and annual revenue of $52 million. The company focuses on optical transceiver modules, active optical cables, MPO cabling, and solutions for datacenter, metro, broadcast, and 5G networks. Gigalight aims to be a one-stop supplier of optical network devices through its technological platforms and partnerships.
This document provides an overview of PROFINET, including:
- PROFINET uses Ethernet standards to provide industrial communications over an Ethernet network at speeds up to 100Mbit/s.
- PROFINET is compatible with PROFIBUS but is not simply PROFIBUS over Ethernet.
- PROFINET supports different update rates, priorities, and IT services for various applications on the same network.
- Commissioning and qualification of a PROFINET network involves testing the installation, topology, device identification, network loads, and more to ensure proper functioning.
The document summarizes the results of stress tests conducted by Croatian Academic and Research Network (CARNet) on various enterprise Wi-Fi access points. A total of 6 vendors participated in the tests, bringing their best AP models to a classroom test environment. A mix of 60 client devices were used to test the APs under increasing loads of 13, 23, 36, and 60 clients, as well as with 36 clients distributed across an arc. Test metrics included throughput and number of failed connections. Ruckus APs consistently achieved the highest throughput scores across all tests, with their R500 and R700 models ranking first or second in each category.
Take a walk through the process of certifying a new PROFINET (or any other industrial Ethernet) against the standards and see how easy it can be, then look at a few gotchas that can easily be avoided by careful planning.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
Shenzhen Kington Optic Co. Ltd is a fiber optic equipment manufacturer founded in 2005 in China. It has attracted many optical technology experts and engineers over the past 10+ years. The company specializes in developing and producing passive optical products like optical splitters, fiber arrays, connectors, and attenuators. In particular, their planar waveguide optical splitters perform well and meet industry reliability standards. Kington aims to be a leading fiber optic equipment manufacturer worldwide through technology research, cost innovation, and management improvements.
Shenzhen KINGTON Optic Co.Ltd is a Chinese company founded in 2005 that specializes in research, production, and export of fiber optic equipment. The company has attracted optical technology experts and has over 10 years of experience in the optical telecommunications field. KINGTON's main products include optical splitters, fiber arrays, connectors, and other passive fiber optic components. In particular, the company focuses on planar waveguide optical splitters that offer good performance and stability.
The document discusses the evolution of Power over Ethernet (PoE) standards and applications. It describes how PoE has increased supported power levels over time from IEEE 802.3af to 802.3at to the upcoming 4-Pair PoE standard 802.3bt, allowing for nearly 100W of power per cable. It also summarizes recommendations from standards bodies on cabling installation for high power PoE, noting that conditions like ventilation and record keeping are important to ensure cabling can safely support the required power levels.
Wireless Controller Comparative Performance Cisco vs Aruba Miercom ReportCisco Mobility
The document compares the performance of wireless controllers from Cisco and Aruba. Key findings include:
1. The Cisco 8540 delivered over twice the throughput of the Aruba 7240 with small and medium packet sizes as well as mixed packet sizes.
2. The Cisco 5520 and 8540 were able to utilize a higher percentage of their maximum bandwidth (85-95% for Cisco vs. 25-30% for Aruba) across packet sizes.
3. Testing found the Cisco 5520 could handle over 3 times as many wireless client authentications per second compared to an older Cisco model, using the 802.1X authentication standard.
4. TCP throughput performance was notably better with Cisco than
The document discusses the evolution of data center cabling standards to support higher bandwidth needs. It notes that multi-fiber push on (MPO) cabling has increased relevance for enabling migration paths to 40G, 100G, and potential 400G connectivity while reusing existing horizontal cabling infrastructure. The document emphasizes that using PanMPO connectors can help raise performance certainty, support faster testing and installation, and reduce capital expenses during upgrades from 10G to 40G/100G and beyond.
The document discusses the process of certifying a PROFINET network and diagnostics. It describes various test types including verification, qualification, and certification tests to assess the network according to standards. Cable verification ensures accurate wiring while qualification testing identifies data transmission performance. Network acceptance tests check the inventory, topology, packet loss rate, and load. Designers are responsible for port numbers, cable labels, device names, and locations. Troubleshooting examines common issues like wiring faults, interference, configuration errors, and device failures.
This document outlines the applicant's objective, education, skills, certifications and work experience in networking. The applicant holds a Bachelor's degree from the University of Punjab and several Cisco certifications including CCNP, CCIP and CCNA. They have over 15 years of experience in networking roles with companies such as KSA Ministry of Health, Mobily, PTCL and Wateen Telecommunication, where they implemented, configured, troubleshot and maintained routing, switching, wireless and security networks. Their skills include BGP, MPLS, OSPF, VLANs, routing protocols and Cisco routers and switches.
Prasad Yalamanchi has over 25 years of experience in networking, telecommunications, and testing. He has worked for companies such as Accenture, AT&T, Verizon, Tellabs, Cisco, and Texas Instruments. His experience includes designing, implementing, and testing networks, wireless systems, IP and voice solutions, and automation testing. Currently he works as an Infrastructure Network Architect at Accenture supporting the Defense Information Systems Agency network.
Towards the Internet of Relevant Things: the IEEE 802.15.4e StandardGiuseppe Anastasi
The document discusses the IEEE 802.15.4 standard and its limitations for Internet of Things applications with stringent requirements. It introduces the IEEE 802.15.4e standard, which amends 802.15.4 to add two new MAC modes - DSME and TSCH. DSME aims to provide bounded latency while TSCH uses channel hopping to improve reliability. The document surveys the literature on both new modes and discusses open issues and how 802.15.4e can help realize the vision of the Internet of Things.
Fluke Networks’ DTX Patch Cord Test Adapter Series gives you
a simple, cost-effective way to quickly verify whether a patch
cord meets industry performance specifications.
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika
☎️ JKT 021-45850618
☎️ SBY 031-8421264
atau kunjungi website kami di https://siwali.com/
Category 6 Patch Cord Performance
Sterling Vaden, VP of Research & Engineering, Optical Cable Corporation
OCC 100% performance tests all Cat6 and Cat6A patch cords using our own industry standard patch cord test adapters and our own industry standard test fixtures - because OCC (SMP) was involved in the creation of the standards and the test adaptors used.
Like its predecessor PROFIBUS, PROFINET is a diagnostic-rich protocol allowing your support team to quickly identify the source of device-related problems. This however is of limited use if the underlying performance of your network is poor. PROFINET networks are often seen as the plug and play solution for industrial networks, giving you the impression that successful completion of your application-specific testing is a guarantee that your network is working efficiently and without errors. This is fundamentally wrong and needs to be considered at the design stage as well as the acceptance stage of a project. This presentation will discuss the issues, how to address them and give typical examples of the equipment required.
This document provides an overview of PROFINET, including:
- PROFINET uses Ethernet standards to provide industrial communications over an Ethernet network at speeds up to 100Mbit/s.
- PROFINET is compatible with PROFIBUS but is not simply PROFIBUS over Ethernet.
- PROFINET supports different update rates, priorities, and IT services for various applications on the same network.
- Commissioning and qualification of a PROFINET network involves testing the installation, topology, device identification, network loads, and more to ensure proper functioning.
The document summarizes the results of stress tests conducted by Croatian Academic and Research Network (CARNet) on various enterprise Wi-Fi access points. A total of 6 vendors participated in the tests, bringing their best AP models to a classroom test environment. A mix of 60 client devices were used to test the APs under increasing loads of 13, 23, 36, and 60 clients, as well as with 36 clients distributed across an arc. Test metrics included throughput and number of failed connections. Ruckus APs consistently achieved the highest throughput scores across all tests, with their R500 and R700 models ranking first or second in each category.
Take a walk through the process of certifying a new PROFINET (or any other industrial Ethernet) against the standards and see how easy it can be, then look at a few gotchas that can easily be avoided by careful planning.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
The AP 622 is a dual radio 802.11a/b/g/n wireless access point that provides high performance wireless connectivity. It features two MIMO radios that allow one radio to be used for client access while the second can be used simultaneously for additional functions like wireless sensing. When deployed with a wireless controller, the AP 622 supports voice and video applications with security, quality of service and mobility services managed locally at the edge of the network.
Shenzhen Kington Optic Co. Ltd is a fiber optic equipment manufacturer founded in 2005 in China. It has attracted many optical technology experts and engineers over the past 10+ years. The company specializes in developing and producing passive optical products like optical splitters, fiber arrays, connectors, and attenuators. In particular, their planar waveguide optical splitters perform well and meet industry reliability standards. Kington aims to be a leading fiber optic equipment manufacturer worldwide through technology research, cost innovation, and management improvements.
Shenzhen KINGTON Optic Co.Ltd is a Chinese company founded in 2005 that specializes in research, production, and export of fiber optic equipment. The company has attracted optical technology experts and has over 10 years of experience in the optical telecommunications field. KINGTON's main products include optical splitters, fiber arrays, connectors, and other passive fiber optic components. In particular, the company focuses on planar waveguide optical splitters that offer good performance and stability.
The document discusses the evolution of Power over Ethernet (PoE) standards and applications. It describes how PoE has increased supported power levels over time from IEEE 802.3af to 802.3at to the upcoming 4-Pair PoE standard 802.3bt, allowing for nearly 100W of power per cable. It also summarizes recommendations from standards bodies on cabling installation for high power PoE, noting that conditions like ventilation and record keeping are important to ensure cabling can safely support the required power levels.
Wireless Controller Comparative Performance Cisco vs Aruba Miercom ReportCisco Mobility
The document compares the performance of wireless controllers from Cisco and Aruba. Key findings include:
1. The Cisco 8540 delivered over twice the throughput of the Aruba 7240 with small and medium packet sizes as well as mixed packet sizes.
2. The Cisco 5520 and 8540 were able to utilize a higher percentage of their maximum bandwidth (85-95% for Cisco vs. 25-30% for Aruba) across packet sizes.
3. Testing found the Cisco 5520 could handle over 3 times as many wireless client authentications per second compared to an older Cisco model, using the 802.1X authentication standard.
4. TCP throughput performance was notably better with Cisco than
The document discusses the evolution of data center cabling standards to support higher bandwidth needs. It notes that multi-fiber push on (MPO) cabling has increased relevance for enabling migration paths to 40G, 100G, and potential 400G connectivity while reusing existing horizontal cabling infrastructure. The document emphasizes that using PanMPO connectors can help raise performance certainty, support faster testing and installation, and reduce capital expenses during upgrades from 10G to 40G/100G and beyond.
The document discusses the process of certifying a PROFINET network and diagnostics. It describes various test types including verification, qualification, and certification tests to assess the network according to standards. Cable verification ensures accurate wiring while qualification testing identifies data transmission performance. Network acceptance tests check the inventory, topology, packet loss rate, and load. Designers are responsible for port numbers, cable labels, device names, and locations. Troubleshooting examines common issues like wiring faults, interference, configuration errors, and device failures.
This document outlines the applicant's objective, education, skills, certifications and work experience in networking. The applicant holds a Bachelor's degree from the University of Punjab and several Cisco certifications including CCNP, CCIP and CCNA. They have over 15 years of experience in networking roles with companies such as KSA Ministry of Health, Mobily, PTCL and Wateen Telecommunication, where they implemented, configured, troubleshot and maintained routing, switching, wireless and security networks. Their skills include BGP, MPLS, OSPF, VLANs, routing protocols and Cisco routers and switches.
Prasad Yalamanchi has over 25 years of experience in networking, telecommunications, and testing. He has worked for companies such as Accenture, AT&T, Verizon, Tellabs, Cisco, and Texas Instruments. His experience includes designing, implementing, and testing networks, wireless systems, IP and voice solutions, and automation testing. Currently he works as an Infrastructure Network Architect at Accenture supporting the Defense Information Systems Agency network.
Towards the Internet of Relevant Things: the IEEE 802.15.4e StandardGiuseppe Anastasi
The document discusses the IEEE 802.15.4 standard and its limitations for Internet of Things applications with stringent requirements. It introduces the IEEE 802.15.4e standard, which amends 802.15.4 to add two new MAC modes - DSME and TSCH. DSME aims to provide bounded latency while TSCH uses channel hopping to improve reliability. The document surveys the literature on both new modes and discusses open issues and how 802.15.4e can help realize the vision of the Internet of Things.
Fluke Networks’ DTX Patch Cord Test Adapter Series gives you
a simple, cost-effective way to quickly verify whether a patch
cord meets industry performance specifications.
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika
☎️ JKT 021-45850618
☎️ SBY 031-8421264
atau kunjungi website kami di https://siwali.com/
Category 6 Patch Cord Performance
Sterling Vaden, VP of Research & Engineering, Optical Cable Corporation
OCC 100% performance tests all Cat6 and Cat6A patch cords using our own industry standard patch cord test adapters and our own industry standard test fixtures - because OCC (SMP) was involved in the creation of the standards and the test adaptors used.
Like its predecessor PROFIBUS, PROFINET is a diagnostic-rich protocol allowing your support team to quickly identify the source of device-related problems. This however is of limited use if the underlying performance of your network is poor. PROFINET networks are often seen as the plug and play solution for industrial networks, giving you the impression that successful completion of your application-specific testing is a guarantee that your network is working efficiently and without errors. This is fundamentally wrong and needs to be considered at the design stage as well as the acceptance stage of a project. This presentation will discuss the issues, how to address them and give typical examples of the equipment required.
The MaxTester 635 is a next-generation tool for testing broadband deployments over copper wires. It supports testing of ADSL2+, VDSL2, and Ethernet networks. Key features include automated testing of DSL services, copper line quality, IPTV, and VoIP. Test results are displayed clearly on a large, easy-to-use touchscreen. The MaxTester 635 simplifies installation and troubleshooting of multi-play networks.
This document provides an overview of WiMAX standards and technology. It discusses the evolution of WiMAX standards, the role of the WiMAX Forum in promoting compatibility, and the growth forecast for the industry. It describes key aspects of WiMAX including available spectrum, features and advantages compared to other technologies, network architecture and profiles. The document provides details on WiMAX certification testing and requirements.
This document provides a technical description of the CMA5000a Gigabit Ethernet application module. It can analyze traffic on 10/100/1000 Mbps optical and electrical Ethernet networks using its 2 optical and 2 electrical ports. Key features include RFC 2544 testing for installation and troubleshooting, non-intrusive network monitoring, IP jitter measurement, and generation of test reports. The document describes the module's monitoring, traffic generation, RFC 2544, and BERT testing functionality as well as its specifications and ordering information.
ASD is a nationwide low voltage solution partner. By manufacturing and selling direct to the end user, ASD is able to bring value to our clients projects, while ensuring superior network performance. With a turnkey approach, ASD will design build your organization's next project.
The document discusses advancements in network cabling standards and technology. It summarizes the evolution from Category 5 to Category 5e standards, and discusses the development of Category 6 standards. It then describes a proposed low-attenuation Category 6 cable called IBDN System 4800LX that shows improved bandwidth and crosstalk performance over existing standards in testing. The cable aims to help support future multi-gigabit applications by reducing insertion losses at high frequencies.
High Cost of a Low-Cost Cable Certification TesterFluke Networks
Things to consider while selecting a new certification tester for network cabling. Good certification testers also typically support performance standards for premises fiber optic cabling, and have diagnostic capabilities for both copper and fiber network cabling.
The Importance of Handheld Optical Power Meters by DINTEK highlights the essential role these devices play in accurately measuring optical power in fiber optic networks. With user-friendly portability and precise readings, they ensure efficient network maintenance and troubleshooting for optimal performance and reliability. To know more, read the full PDF.
TMYTEK is a company that specializes in mmWave and 5G NR technology. They provide various products to support 5G NR development including their BBox beamforming kit, UD Box up/down converter, and individual mmWave components. Their BBox kit allows control of phase and amplitude for beamsteering experiments across multiple channels. The UD Box provides frequency conversion between mmWave 5G NR bands and intermediate frequencies to enable more cost-effective testing and development. TMYTEK aims to contribute to making internet access available everywhere through their mmWave technology and products.
Micro Scanner2 - Raising Cable Verification to a Higher PowerFluke Networks
For more than a decade, cabling installation and maintenance technicians have relied on MicroScanner to verify terminations and troubleshoot continuity.
faults.
1) The document provides information on TMYTEK's products for 5G NR including the BBox beamforming development kit, UD Box up/down converter, and Antenna-in-Package solutions.
2) The BBox kit includes components for phase and amplitude control like the ΦA Box, antenna arrays, switches, and software control interfaces. It is aimed to emulate base station and UE beamforming.
3) The UD Box provides frequency conversion between 5G NR bands and IF to enable more cost-effective testing and includes a built-in local oscillator.
JTOPTICS® 40G QSFP+ AOC (Active Optical Cables) breakout cables are meticulously designed to facilitate interconnection between network equipment featuring QSFP+ ports and 10G SFP+ ports. Also recognized as QSFP+ splitter AOC or QSFP+ Fan-out AOC cables, this breakout cable configuration encompasses four parallel bi-directional channels, each operating at 10.3125 Gbps. It consists of one 40G QSFP+ module on one end and four 10G SFP+ modules on the other end, all interconnected with fixed-length OM3/OM4 fiber cables. Noteworthy for its lightweight, flexible, and soft attributes, the QSFP+ to 4x SFP+ breakout AOC is well-suited for installations in constrained spaces and over extended distances.
Key Features:
1. Hot-pluggable QSFP+/SFP+ form factor full-duplex AOC assembly for user-friendly installation.
2. Incorporates a 4-channel 850nm VCSEL and PIN photo-detector for reliable data transmission.
3. Data rate up to 10.3125Gbps per channel, ensuring high-speed and efficient performance.
4. Compliant with QSFP+ MSA (SFF-8436) and SFP+ MSA (SFF-8431) standards for industry compatibility.
5. Adheres to SFF-8432 and SFF-8472 standards for performance benchmarks and compatibility.
5. Compliant with IEEE 802.3ba 40GBASE-SR4 and IEEE 802.3ae 10GBASE-SR for versatile applications.
6. Compliant with InfiniBand SDR/DDR/QDR for comprehensive compatibility.
7. MMF cable with customizable length up to 100m (OM3) for flexible connectivity options.
8. 1.5W maximum power dissipation per 40G QSFP+ SR4 module for energy-efficient operation.
9. Operating case temperature range from 0 to 70°C, suitable for various environmental conditions.
10. Operates on a 3.3V power supply voltage for simplified power management.
11. Built-in digital diagnostic functionality for comprehensive monitoring.
12. RoHS compliant (lead-free), aligning with environmental standards.
This document provides guidelines for certifying twisted-pair cabling for 10Gb/s Ethernet transmission, which requires testing for alien crosstalk (AXTalk). It outlines a two-phase certification process: 1) in-channel certification to test individual link parameters up to 500MHz, and 2) between-channel certification to measure AXTalk between links. AXTalk is measured using specialized test equipment connecting links as victim and disturber. Links most challenging for compliance, like longest or closest connectors, should be tested first.
The document discusses the need to properly test fiber optic installations to support new applications like Gigabit Ethernet and 10 Gigabit Ethernet. Generic cable standards are not sufficient and a tester needs to automatically check against application-specific limits. There are currently seven different sets of length and loss limits for variants of Gigabit Ethernet, and 10 Gigabit Ethernet will likely require many more sets of complex testing limits. A field tester should keep track of the different application test limits and produce a test report with pass/fail results for each network application and generic cable standards.
Jonathan Jew en Congreso Bicsi México 2015BICSI MX
Jonathan Jew, integrante del Comité Directivo de los grupos de creación de normas sobre Centros de Datos en ISO, BICSI, TIA, nos comparte los contenidos más actuales y tendencias en el tema.
Similar to Wirexpert 4500 es un certificador de cable utp (20)
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Wirexpert 4500 es un certificador de cable utp
1. CableCertifier
Wire✗pert
The WireXpert is the first cable certifier with capability to certify the highest
performance cabling systems in enterprise networks and data centers. Cable
installers make significant gain in productivity with WireXpert‘s industry leading
test speed and ease of use. With certification testing up to Class FA and CAT8
copper cabling, as well as MPO, SM and MM fiber optic cabling, WireXpert is
ready for 40G and beyond. In fact, major cable vendors are using WireXpert
in their labs for qualifying CAT8 cabling systems under development.
4500
1st CAT 8 Cable Certifier
1st CAT 8 Cable Certifier
2. CableCertifier
2
Wire✗pert 4500
Feature List
• First cable certification up to 2500 MHz to support
new TIA CAT 8 und ISO Class I and II draft standard
• Most advanced cable certification for all standards: Class D/E/EA
/FA
, Category
5e/6/6A
, and the new draft CAT 8 as well as ISO draft standards Class I and Class II
• Fastest Autotest in less than 9 Seconds
• Accuracy independently verified by ETL
• Exceeds ISO Level V*, IV and TIA Level IIIe Accuracy requirements
• Endorsed by over 20 cable companies worldwide
• Field upgradable with many options e.g. patchcord testing, Industrial Ethernet, Class FA
• Perform extended Fiber certification for 850/1300 MM and 1310/1550 SM Fiber
• First to support MPO Fiber testing for data centers
• Advanced reporting and documentation
• The only certifier supporting all data center, premise cabling and industrial ethernet
requirements
* draft IEC61935-1 ed4
3. CableTesterofChoice
3
Easy to Use and ruggedized design
WireXpert comes with an intuitive touch sensitive user interface, featuring bright color
LCD screens designed for industrial, heavy duty usage. The Dual Control System (DCS TM
)
– featuring identical devices for remote and main units – makes it really easy to
operate the test cycles. Whether coordinated by two technicians or only one, walking
time between outlets is minimized.
Fast and simple for highest productivity
WireXpert completes CAT 6A
certification test in less than 9 seconds and Class FA
testing
in 15 seconds. It offers intuitive navigation through the screens on the device, and
generates professional reports through its PC software ReportXpert.
Protects your Investment: Beyond 10G
If you are testing 10 Gb/s cabling, WireXpert is the clear choice. If you are thinking
beyond 10G, WireXpert is the only choice. Built on a future proof, scalable
measurement engine, WireXpert protects your investment in test equipment as the
data rates supported by the cabling systems increase. WireXpert employs a novel
measurement architecture that achieves extremely wide bandwidth with superior
measurement accuracy. Its unique RF measurement engine exceeds level IV and
level V requirements throughout the easurement frequency range.
Proven Accuracy
WireXpert has been independently verified by
highly respected test laboratories such as ETL.
Vendor Approvals
Most leading cable manufacturers have extensively
tested WireXpert and have approved the instrument
for field certification and associated warranties of
their structured cabling solutions. Laboratory
testing and comparisons against
vector analyzers have proven that WireXpert
has excellent accuracy and measurements
correlate with laboratory equipment. In fact,
major cable vendors are using WireXpert in
their labs for qualifying CAT8 cabling
systems under development.
4. CopperCablecertification
4
Testing Cabling Systems CAT6A
and Beyond
WireXpert, with its industry leading measurement
performance, provides adapters for testing cabling
systems with higher performance than CAT6A
(500MHz).
For Class FA
cabling, testing is performed over full
standards defined frequency range from 1MHz through
1000MHz. Both TERA and GG45/ARJ45 interfaces are
available through WireXpert test adapters. Both channel
and permanent link testing are supported. Adapters are
also available for testing CAT7A
patch-cords.
With measurement bandwidth exceeding 2000MHz,
WireXpert is capable of testing CAT8 cabling once
the standard is approved.
Wire✗pert 4500
Kit Includes Quantity
WireXpert Handheld units 2
Li-Ion Batteries 2
Stylus with Cords 2
Display Protection Covers 2
CAT 6A
Permanent Link Interface Adapters 2
CAT 6A
Permanent Link Test Cords 2
CAT 6A
Channel Adapters 2
USB Thumb Drive incl. Manual and Software 1
Talk Head Sets 2
AC Power Adapters 2
Country Specific Power Cord 2
Calibration Certificate 1
Carrying Case 1
Quick Reference Guide 1
5. CopperCableTesting
5
CopperCablecertification
Copper patch-cord testing with WireXpert
WireXpert offers an efficient way for quickly identifying and
recording the performance of patch-cords. With its fast and
accurate dual-ended testing, WireXpert‘s patch-cord test kits are
suitable for both manufacturing testing, as well as for incoming
inspection at end user premises.
WireXpert patch-cord test kits are available for testing CAT5e,
CAT6, CAT6A
, and CAT7/7A
patch-cords.
Industrial Ethernet cabling test
WireXpert‘s industrial Ethernet cabling test solution comprise of
M12 adapter kits. Both channel and permanent link configurations
with M12 industrial Ethernet connector are supported.
Industrial Ethernet kit with X-Coded M12 interface is also
available, making it possible to effectively test 10-Gig ready
industrial Ethernet cables.
Coax cable test
With coax test adapters,WireXpert supports testing of coaxial
cables for attenuation and return loss over a wide frequency band.
Alien Cross-talk
Alien crosstalk testing with WireXpert is performed using two
WireXpert sets. This means, there are no special adapters and no
need for carrying a laptop to the field for data analysis.
Laboratory Testing of Cables and components
WireXpert features extremely versatile adapters that enable the
lab technicians to replace expensive Vector Network Analyser with
WireXpert for performing differential S-parameter measurements
over 1MHz to 2,500MHz.
Adapters Accessories for Copper Cable Certification
Adapters Accessories
Class EA
/ CAT6A
channel adapter kit
Pair of Permanent link cerification test cord for Class EA
/ CAT6A
and below (wearable part)
Kit for Class F and Class FA
TERA permanent link testing
Kit for Class FA
channel adapters with GG45/ARJ45 interface
Pair of coax adapters
Pair of CAT6A
patch cord adapters
Hard carrying case
Pair of nylon covers
6. FibercableCertification
6
WireXpert Optical Loss Test Kit
Modern network infrastructure involves installing
both copper and fiber cabling within the same
premises. With the increasing demand for bandwidth,
certification plays a crucial role for guaranteed data
rates. Certification requires characterizing each fiber
link to the desired standards in measuring the
insertion loss (attenuation) and length of the fiber link.
WireXpert provides you with a fast, easy and accurate
way of determining the pass/fail criteria of the
installation across ISO/IEC or TIA standards.
• Performs autotest in less than 6 seconds
• Perform Tier 1 Certification for ISO/IEC and
TIA 568 C.3 Standards
• Measures and certifies length and loss for singlemode
at 1310nm and 1550 nm and multimode cabling at 850nm
and 1300nm
• Seamlessly integrates copper and fiber reports.
Generate professional warranty and certification test reports
• Double your productivity with DCSTM
technology by using your remote unit as an
independent optical certifier
Test Limits and Link validations
WireXpert optical loss test kit supports all the latest standards from TIA 568 C.3 to
ISO 14763-3 standard. By automatically calculating the loss budgets the WireXpert
saves you the trouble of having to perform cumbersome calculations and plugging
in data for individual connectors and splices for different standards. In certain
scenarios where end-to-end loss is required to be measured and documented,
WireXpert provides with a customized link validation workflow that lets you define
end-to-end loss and perform the certification.
Multimode and Singlemode kits
WireXpert optical loss kits are available for both multimode and
singlemode fiber networks. The modular solution allows testing both
types of networks on the same WireXpert unit with interchangeable
adapters. Each module lets you perform very accurate loss and
length measurements at two wavelengths meeting all the various
standard requirements. Both kits support certification of horizontal as
well as back-bone cabling by supporting dual wavelength
measurement on each adapter.
Wire✗pert 4500
7. ReportingFibercableCertification
7
MPO Testing Kit
WireXpert‘s versatile MPO testing solution enables data center IT managers to get
quick and accurate assessment of the quality of MPO links. Additionally, it helps in
performing incoming inspection of MPO components like cassettes. The key feature of
this solution is a 5-second Autotest that includes a detection of fiber connection map
and measurement of loss on each channel.
WireXpert cable certification tester enables testing of MPO/MTP links when used with
MPO adapters. A typical test setup consists of WireXpert local unit with MPO power
meter adapter, and the remote unit with MPO light source adapter attached.
Alternatively, a multimode fiber adapter can be attached to WireXpert local unit for
testing individual fibers in MPO link.
This solution provides a fast and accurate measurement of MPO link loss and testing
against user configured limit.
Professional eXport
Manage your results and generate professional reports and warranty
documents. The WireXpert certification solution includes eXport,
a PC based reporting software that produces full color graphical reports
in summary or detail.
Adapters Accessories for Fiber Cable Certification
Adapters Accessories
Multimode Fiber adapter kit
Singlemode Fiber adapter kit
MPO test kit