what is the relationship between percent transmittance and the color o.docx
•Download as DOCX, PDF•
0 likes•17 views
what is the relationship between percent transmittance and the color of the solutions what is the relationship between percent transmittance and the color of the solutions what is the relationship between percent transmittance and the color of the solutions Solution A) The percent transmittance is defined as the amount of light that passes through a sample. The percent transmittance and absorbance are related by the following equation: Absorbance = -log (percent transmittance/100). Higher absorbance is directly proportional to lower transmittance. A measure of the extent to which a substance transmits light or other electromagnetic radiation is known as absorbance. ( i.e. the colour of solution - a substance show colour when it transit light and the substance which do not transmit any light they appear black. ) B) The basic relationship is between absorbance and concentration A = ebc ... where A = absorbance, e = molar absorptivity, b = path length, c = concentration in moles per liter Transmittance (T) = percent T / 100 A = log (1/T) or A = 2 - log(%T) 10^A = 1/T T = 10^-A %T = 100(10^-A) .
Report
Share
Report
Share
Recommended
Working of spectrophotometer
1. A spectrophotometer works by separating light into wavelengths using a diffraction grating and measuring how much light is absorbed by a sample. Some light is absorbed when the electrons in sample molecules absorb specific wavelengths of energy and become excited.
2. Absorption follows Beer's law, where absorbance is directly proportional to concentration and path length. Transmittance is measured to calculate absorbance.
3. Graphs of absorbance versus concentration or path length will produce straight lines, demonstrating the direct proportionality as described by Beer's law.
Uv vis spectroscopy- part-1
UV-Visible spectroscopy involves absorption of ultraviolet or visible light by molecules. This absorption causes electrons to move to higher energy molecular orbitals. The Beer-Lambert law states that absorbance is directly proportional to concentration and path length. Deviations from Beer-Lambert law can occur at high concentrations due to interactions between molecules, or if non-monochromatic light is used. UV-Visible spectroscopy is used to study electronic transitions and structure of molecules.
UV-Visible.ppt
Light interacting with matter as an analytical tool
The document discusses the use of electromagnetic radiation across the electromagnetic spectrum as an analytical tool when interacting with matter. It covers topics like the electromagnetic spectrum, light behaving as both a wave and particle, spectroscopy terminology, various light sources, components of spectrometers like monochromators, sample compartments, and detectors. It also discusses applications of spectroscopy in qualitative and quantitative analysis of organic and inorganic compounds.
Introduction to beer lambert law
Introduction to beer lambert lawInstitute of Leather Engineering and Technology, University of Dhaka
This document discusses the Beer-Lambert law, which states that the absorbance of light as it passes through a substance is directly proportional to the concentration of that substance and the path length. It provides the mathematical expression of the Beer-Lambert law and defines terms such as transmittance and absorbance. The document explains that absorbance is preferred over transmittance for expressing the Beer-Lambert law because absorbance results in a linear relationship with concentration that allows for simple quantitative analysis. Several examples are provided to demonstrate applications of the Beer-Lambert law.Absorbance powerpoint
1) Spectrophotometry is a technique used to measure how much light of varying wavelengths is absorbed by a substance.
2) The document outlines procedures for using a spectrophotometer to determine the wavelength of maximum absorbance (lambda max) of a basic fuchsin dye solution.
3) It then discusses how to use the Beer-Lambert law to determine the relationship between absorbance and concentration by measuring absorbance values of serial dilutions of the dye solution.
Absorbancepowerpoint 150602233008-lva1-app6891
* Mb = 0.05 mol/L (molarity of initial solution)
* Vb = 25.0 mL (volume of initial solution)
* Va = 75.0 mL (total volume of diluted solution)
* Using the dilution equation:
MbVb = MaVa
(0.05 mol/L)(25.0 mL) = Ma(75.0 mL)
1.25 mmol = Ma(75.0 mL)
Ma = 1.25 mmol/75.0 mL = 0.0167 mol/L = 0.0167 M
The molarity of the diluted solution is 0.0167 M.
Colorimetry, spectrophotometry and nephelometry.pptx
1. Colorimetry, spectrophotometry, and nephelometry are techniques used to determine the concentration of colored compounds in solutions.
2. A spectrophotometer uses a monochromator such as a prism or diffraction grating to transmit single wavelengths of light, allowing it to measure absorbance across the ultraviolet, visible, and infrared regions of the electromagnetic spectrum.
3. The key principles of Beer's Law and Lambert's Law describe the linear relationship between absorbance and concentration, and the effect of path length on absorbance measurements respectively, enabling quantification of unknown analyte concentrations from photometric measurements.
Chapter one
Spectroscopy is the science that deals with interactions between electromagnetic radiation and matter. It involves transitions between energy levels of atoms and molecules when they absorb or emit photons. Different regions of the electromagnetic spectrum, such as visible light, ultraviolet light, infrared light, and radio waves, can be used in spectroscopy. Absorption spectroscopy measures the absorption of radiation to identify substances based on their unique absorption patterns. Beer's law describes the relationship between absorbance of a sample and its concentration.
Recommended
Working of spectrophotometer
1. A spectrophotometer works by separating light into wavelengths using a diffraction grating and measuring how much light is absorbed by a sample. Some light is absorbed when the electrons in sample molecules absorb specific wavelengths of energy and become excited.
2. Absorption follows Beer's law, where absorbance is directly proportional to concentration and path length. Transmittance is measured to calculate absorbance.
3. Graphs of absorbance versus concentration or path length will produce straight lines, demonstrating the direct proportionality as described by Beer's law.
Uv vis spectroscopy- part-1
UV-Visible spectroscopy involves absorption of ultraviolet or visible light by molecules. This absorption causes electrons to move to higher energy molecular orbitals. The Beer-Lambert law states that absorbance is directly proportional to concentration and path length. Deviations from Beer-Lambert law can occur at high concentrations due to interactions between molecules, or if non-monochromatic light is used. UV-Visible spectroscopy is used to study electronic transitions and structure of molecules.
UV-Visible.ppt
Light interacting with matter as an analytical tool
The document discusses the use of electromagnetic radiation across the electromagnetic spectrum as an analytical tool when interacting with matter. It covers topics like the electromagnetic spectrum, light behaving as both a wave and particle, spectroscopy terminology, various light sources, components of spectrometers like monochromators, sample compartments, and detectors. It also discusses applications of spectroscopy in qualitative and quantitative analysis of organic and inorganic compounds.
Introduction to beer lambert law
Introduction to beer lambert lawInstitute of Leather Engineering and Technology, University of Dhaka
This document discusses the Beer-Lambert law, which states that the absorbance of light as it passes through a substance is directly proportional to the concentration of that substance and the path length. It provides the mathematical expression of the Beer-Lambert law and defines terms such as transmittance and absorbance. The document explains that absorbance is preferred over transmittance for expressing the Beer-Lambert law because absorbance results in a linear relationship with concentration that allows for simple quantitative analysis. Several examples are provided to demonstrate applications of the Beer-Lambert law.Absorbance powerpoint
1) Spectrophotometry is a technique used to measure how much light of varying wavelengths is absorbed by a substance.
2) The document outlines procedures for using a spectrophotometer to determine the wavelength of maximum absorbance (lambda max) of a basic fuchsin dye solution.
3) It then discusses how to use the Beer-Lambert law to determine the relationship between absorbance and concentration by measuring absorbance values of serial dilutions of the dye solution.
Absorbancepowerpoint 150602233008-lva1-app6891
* Mb = 0.05 mol/L (molarity of initial solution)
* Vb = 25.0 mL (volume of initial solution)
* Va = 75.0 mL (total volume of diluted solution)
* Using the dilution equation:
MbVb = MaVa
(0.05 mol/L)(25.0 mL) = Ma(75.0 mL)
1.25 mmol = Ma(75.0 mL)
Ma = 1.25 mmol/75.0 mL = 0.0167 mol/L = 0.0167 M
The molarity of the diluted solution is 0.0167 M.
Colorimetry, spectrophotometry and nephelometry.pptx
1. Colorimetry, spectrophotometry, and nephelometry are techniques used to determine the concentration of colored compounds in solutions.
2. A spectrophotometer uses a monochromator such as a prism or diffraction grating to transmit single wavelengths of light, allowing it to measure absorbance across the ultraviolet, visible, and infrared regions of the electromagnetic spectrum.
3. The key principles of Beer's Law and Lambert's Law describe the linear relationship between absorbance and concentration, and the effect of path length on absorbance measurements respectively, enabling quantification of unknown analyte concentrations from photometric measurements.
Chapter one
Spectroscopy is the science that deals with interactions between electromagnetic radiation and matter. It involves transitions between energy levels of atoms and molecules when they absorb or emit photons. Different regions of the electromagnetic spectrum, such as visible light, ultraviolet light, infrared light, and radio waves, can be used in spectroscopy. Absorption spectroscopy measures the absorption of radiation to identify substances based on their unique absorption patterns. Beer's law describes the relationship between absorbance of a sample and its concentration.
Introduction to Colorimetry and basics.ppt.pptx
Colorimetry uses the human eye to determine the concentration of colored species, while spectrophotometry uses instruments to make the same measurements over a wider range. This experiment demonstrates both techniques on dyes, using visual observations and a spectrophotometer. Absorbance measurements from the spectrophotometer are plotted versus wavelength to identify dyes. Colorimetry and spectrophotometry rely on the fact that compounds absorb complementary colors of light.
Colorimetry.ppt.pptx
Colorimetry uses the human eye to determine the concentration of colored species, while spectrophotometry uses instruments to make quantitative measurements beyond the visible range. This experiment demonstrates both techniques on dyes. Colorimetry involves visual observations of solutions and mixtures, while spectrophotometry uses a Spec-20 spectrophotometer to measure transmittance and absorbance according to Beer's law. The results will be plotted and analyzed.
Photometry
This document discusses photometry, which is a technique used to measure the concentration of a substance in solution by measuring how it absorbs, transmits, or emits light of a particular wavelength. It explains key concepts like absorbance, transmittance, Beer's law, and Lambert's law. The document compares colorimeters and spectrophotometers, noting that spectrophotometers use prisms rather than filters to isolate specific wavelengths, resulting in higher purity, sensitivity, and accuracy. Photometry is used to quantify substances that are inherently colored or can be made colored through chemical reactions.
Uv spectroscopy
This document provides an overview of UV-Visible Spectroscopy. It discusses the basic principles including electromagnetic radiation, interaction of radiation with matter, and electronic transitions. It describes Beer-Lambert's law and how absorbance is directly proportional to concentration and path length. Different types of electronic transitions like σ→σ*, n→σ*, π→π*, and n→π* are explained. Instrumentation components like radiation sources, monochromators, sample holders and detectors are briefly outlined. Key terms like chromophore, auxochrome, bathochromic shift, hypsochromic shift, hyperchromic effect and hypochromic effect are also defined.
2.5.2 Absorption In the last laboratory you noticed that thermal.docx
2.5.2 Absorption
In the last laboratory you noticed that thermal or electrical excitation of atoms caused electrons to be promoted to higher levels of lying energy. The subsequent relaxation of the excited electrons to their ground energy levels was followed by photon emissions in the visible electromagnetic spectrum field. The distinctive colors emitted during this relaxation phase can in some cases be used to classify the individual responsible for the spectrum of emissions. You will be turning this phenomenon around for the next two test times by using the absorption spectrum of a transition metal ion in aqueous solution. The transition metal ions are known to show a wide variety of colours. Yes, many transition metal ions are responsible for the colored pigments in paints, the color of gemstones such as rubies or sapphires and stained glass colors. Absorption spectra of chemical species (atoms, molecules or ions) are produced when a beam of electromagnetic energy (i.e. light) passes through a sample and a portion of the photons of electromagnetic energy passing through the sample is absorbed by the chemical species. A perfect example of this phenomenon is our understanding of colour. Consider the case where a ray of white light (i.e., sunlight) passes through a chlorophyll-containing sample solution (the compound responsible for leaf colour). In the blue and red regions of the visible portion of the electromagnetic spectrum the chlorophyll molecules absorb only a few select photons. The energies of such absorbed photons cause electrons to be excited in the chlorophyll molecule and the energy of these excited electrons is used in the plant cell to drive the conversion of carbon dioxide and water into glucose. More important for our purposes is that when the red and blue photons which chlorophyll absorbs are subtracted from white light, the resulting light beam that leaves the solution appears green to our eyes and this is why leaves appear green to us. If we were able to calculate the total number of photons of all colors entering the sample and compare it with the total number of photons of all the colors leaving the sample, we would find fewer photons exiting the sample than entering it. This is consistent with the fact that some of the photons from the white light beam that entered the solution were absorbed by the chlorophyll molecules.A spectrophotometer is an instrument for doing this measurement. Using some well-understood electronics this tool effectively "counts" the number of photons entering a sample and compares it to the number of photons leaving a sample. Moreover, the device is capable of taking white light and splitting it into its constituent colors (i.e. much like Copyright © 2010; John Hardesty and Bassam Attili Page 2 a prism), enabling the user to analyze the light absorption of different wavelengths with a resolution of almost 1 nm. In optics, the portion of physics which deals with light properties The Intensity, I,.
Chaprter 23 spectrophotometer
This document discusses principles of light measurement using spectroscopy. It describes how light is part of the electromagnetic spectrum, including visible light wavelengths between 380-780nm. It explains the units used to measure light, and the interactions between light and matter including transmittance, absorbance, reflection and scattering. Absorbance represents the amount of light absorbed by a sample and is calculated based on transmittance. A spectrophotometer is used to measure transmittance and absorbance, and contains a light source, wavelength selector, sample chamber and detector. Cuvettes hold liquid samples and their dimensions determine the light path length.
In biology studies, if we have any colored solutions, that means we .pdf
In biology studies, if we have any colored solutions, that means we can measure the
INTENSITY of the COLOR by spectrophotometry and relate it to the concentration of that
component (solute) at any given time. TRUE OR FALSE? Explain.
What is the range of numbers for absorbance in spectrophotometry? __ to ____ and What
number is beyond limit?
Explain the relationship between optical density and absorbance value.
Solution
True. Spectrophotometry uses photometers that can measure a light beam\'s intensity as a
function of its color (wavelength) known as spectrophotometers.It is used to measure the
transmttance of solutions. When a solution concentration is high, less light passes through it and
vice versa.
range of numbers for absorbance in spectrophotometry is 0 to 1.
Any value above 1 is beyond limit.
Optical density is directly proportional to absorbance value. The optical density of a substance is
the logarithmic ratio of the intensity of transmitted light to the intensity of the incident light
passing through the substance..
Introduction to spectroscopic methods
This document provides an introduction to spectrometric methods and the Beer-Lambert law. It defines key terms like absorbance, transmittance, molar absorptivity, and wavelength. The Beer-Lambert law states that absorbance is directly proportional to concentration, path length, and molar absorptivity. It also explains that absorbance follows a linear relationship with concentration at a given path length and wavelength for a single analyte. Deviations from Beer's law can occur under certain circumstances.
COLORIMETER. Principal an applications uses of calorimeter
principal and application of calorimeter, beers lambarts law, how to major lambda max, and how to use calorimeter,
Lab1-Spectrophotometry.ppt
This document introduces spectrophotometry and spectroscopy. It defines these terms as the study of light and matter interactions and using electromagnetic radiation to analyze light absorption by samples. Spectrophotometers measure absorption and spectroscopes measure emission. The document discusses the electromagnetic spectrum, how color is related to wavelength, Beer's Law which states absorbance is proportional to concentration, and how spectrophotometers are used to generate standardization graphs to determine unknown concentrations.
Spectrophotometry.pptx
Spectrophotometry involves using a spectrophotometer to measure how much light is absorbed by a sample at different wavelengths. It relies on Beer's Law, which states that absorbance is directly proportional to concentration, path length, and absorptivity. A spectrophotometer directs light from a source through a sample and measures the intensity of the transmitted light, allowing the absorbance and concentration of the sample to be determined. Spectrophotometry is used in various applications including chemistry, medicine, and environmental monitoring.
8b-EnzymeKinetics-Spec.pdf
A spectrophotometer measures the amount of light that passes through a solution, allowing quantification of light absorption. It works by focusing a light source through the solution and measuring the intensity of the transmitted light. Spectrophotometers are used to precisely measure absorbance, which is related to analyte concentration according to Beer's Law. They contain components that focus light, select wavelengths, hold samples, and detect transmitted light intensities.
An in Vitro Diagnostic Assays determine by using of Beer Lambert's Law - MATH...
The document discusses the principles of absorbance spectroscopy. It defines absorbance (A) as being dependent on molar absorptivity (ε), path length (b), and concentration (c). It also defines other related terms like transmittance (T) and discusses how absorbance is affected by factors like concentration, light scattering, and fluorescence. It briefly mentions applications to analytical chemistry and cell counting by fluorescence.
UV-Ultraviolet Visible Spectroscopy MANIK
Introduction, electromagnetic radiation, units, electromagnetic and absorption spectra, Lambert’s and Beer’s laws, deviations from Lambert’s–Beer’s law, chromophores and auxochromes, absorption and intensity shift, types of electronic transition, effects of solvents,
electronic transition in polyenes, instrumentation, colorimetry, Woodward-Fieser rules for
calculating absorption maximum, analysis of mixtures, applications of ultraviolet and visible
spectroscopy in quantitative analysis of drugs, use of ultra violet and visible spectroscopy in
structural analysis.
Basic uv spectroscopy
This document provides an overview of UV/Visible spectroscopy. It begins with definitions of spectroscopy and discusses the principles, including that spectroscopy involves measuring the absorption or emission of electromagnetic radiation by molecules as they change energy states. It also defines key terms like chromophores, auxochromes, and discusses different types of electronic transitions that can occur. The document then discusses instrumentation components like sources of radiation, collimating systems, monochromators, and detectors. It provides details on various types of sources, monochromators, and filters. In summary, the document provides a comprehensive introduction to the theory, applications, and instrumentation of UV/Visible spectroscopy.
Chapter 17 spectroscopy
Spectroscopy involves the interaction of electromagnetic radiation with matter. Spectroscopic methods are used to elucidate molecular structure and quantify inorganic and organic compounds. There are several regions of the electromagnetic spectrum used including X-ray, UV, visible, and IR. Important concepts include Beer's law, which states absorbance is proportional to concentration, molar absorptivity, and path length. Spectrophotometry is used for qualitative and quantitative analysis in areas such as determining unknown concentrations. Fluorescence also provides a sensitive technique where molecules emit light at longer wavelengths after absorbing radiation.
Chapter17spectroscopy 140707121322-phpapp01
Spectroscopy involves the interaction of electromagnetic radiation with matter. Spectroscopic methods are used to elucidate molecular structure and quantify inorganic and organic compounds. There are several regions of the electromagnetic spectrum used including X-ray, UV, visible, and IR. Important concepts include Beer's law, which states absorbance is proportional to concentration, molar absorptivity, and path length. Spectrophotometry is used for qualitative and quantitative analysis in areas such as determining unknown concentrations. Fluorescence also provides a sensitive technique where molecules emit light at longer wavelengths after absorbing radiation.
Thin Film Interference Jennifer Whetter
This LO presents conditions for constructive and destructive thin film interference. An example of thin film interference in butter fly wings with a worked solution is provided to assist in application of the concepts and demonstrate the real life applications of this topic.
COLORIMETER & LAMBERTS – BEER’S LAW.pptx
colorimeter is used in lab diagnostic medicine and is based on lamberts and beer s law. these ppts gives a clear view regarding the mentioned subject.
UV Visible Spectroscopy
UV-Visible Spectroscopy is a technique that uses light in the visible and adjacent ranges. It works based on how molecules absorb light at specific wavelengths. The document discusses the principles of UV-Vis spectroscopy including Beer's law, electronic transitions, chromophores and auxochromes. It also covers instrumentation components like light sources, monochromators, sample cells and detectors. Factors affecting absorption spectra are solvents, pH and conjugation. The technique has applications in analytical chemistry for identification and quantification of analytes.
Create your own variant of both a hiring and a termination policy rela.docx
Create your own variant of both a hiring and a termination policy related to security and keeping company info secure.
Solution
Information Security management is a process of defining the security controls in order to protect the information assets.
Security Program
The first action of a management program to implement information security is to have a security program in place.
Security Program Objectives: Protect the company and its assets. Manage Risks by Identifying assets, discovering threats and estimating the risk. Objects are- Information Classification, Security Organization, and Security Education.
Security Management Responsibilities: Determining objectives, scope, policies,re expected to be accomplished from a security program. Evaluate business objectives, security risks, user productivity, and functionality requirements.
Approaches to Build a Security Program
Security Controls
Security Controls can be classified into three categories- Administrative Controls, Technical or Logical Controls ,Physical Controls.
The Elements of Security
Vulnerability: Vulnerability characterizes the absence or weakness of a safeguard that could be exploited.
Threat: Any potential danger to information or systems. A threat is a possibility that someone (person, s/w) would identify and exploit the vulnerability.
Risk: Risk is the likelihood of a threat agent taking advantage of vulnerability and the corresponding business impact. Reducing vulnerability and/or threat reduces the risk.
Exposure: An exposure is an instance of being exposed to losses from a threat agent. Vulnerability exposes an organization to possible damages.
Countermeasure or Safeguard: It is an application or a s/w configuration or h/w or a procedure that mitigates the risk.
The Relation Between the Security Elements Example: If a company has antivirus software but does not keep the virus signatures up-to-date, this is vulnerability. The company is vulnerable to virus attacks. The likelihood of a virus showing up in the environment and causing damage is the risk.
.
Determine the valuation of long-term liabilities- Donald Lennon is the.docx
Determine the valuation of long-term liabilities.
Donald Lennon is the president, founder, and majority owner of Wichita Medical Corporation, an emerging medical technology products company. Wichita is in dire need of additional capital to keep operating and to bring several promising products to final development, testing, and production. Donald, as owner of 51% of the outstanding stock, manages the company\'s operations. He places heavy emphasis on research and development and long-term growth. The other principal stockholder is Nina Friendly who, as a nonemployee investor, owns 40% of the stock. Nina would like to deemphasize the R&D functions and emphasize the marketing function to maximize short–run sales and profits from existing products. She believes this strategy would raise the market price of Wichita\'s stock.
All of Donald\'s personal capital and borrowing power is tied up in his 51% stock ownership. He knows that any offering of additional shares of stock will dilute his controlling interest because he won\'t be able to participate in such an issuance. But, Nina has money and would likely buy enough shares to gain control of Wichita. She then would dictate the company\'s future direction, even if it meant replacing Donald as president and CEO.
The company already has considerable debt. Raising additional debt will be costly, will adversely affect Wichita\'s credit rating, and will increase the company\'s reported losses due to the growth in interest expense. Nina and the other minority stockholders express opposition to the assumption of additional debt, fearing the company will be pushed to the brink of bankruptcy. Wanting to maintain his control and to preserve the direction of “his†company, Donald is doing everything to avoid a stock issuance and is contemplating a large issuance of bonds, even if it means the bonds are issued with a high effective–interest rate.
Instructions
Answer the following questions.
Who are the stakeholders in this situation?
What are the ethical issues in this case?
What would you do if you were Donald?
Solution
a)Donald and nina are the stakeholders in this situation .
b)Ethical issue involved in this case is to Raise additional funds by issue of stock or to raise additonal debts to meet fund requirement.
If funds are raised through issue of stock ,Donald stock ownership will be diluted and when bonds are issued ,it will be costlier to a company to raise additional funds.
c) Donald can either go for BOOTSTRAPPING where funds are raised by investing the retained earnings of a company and finding a means within a company.
Also Donald can also suggest Right issue of shares where shares are offered to existing shareholders at concessional price (lower than market) so that his ownership is not diluted.
.
More Related Content
Similar to what is the relationship between percent transmittance and the color o.docx
Introduction to Colorimetry and basics.ppt.pptx
Colorimetry uses the human eye to determine the concentration of colored species, while spectrophotometry uses instruments to make the same measurements over a wider range. This experiment demonstrates both techniques on dyes, using visual observations and a spectrophotometer. Absorbance measurements from the spectrophotometer are plotted versus wavelength to identify dyes. Colorimetry and spectrophotometry rely on the fact that compounds absorb complementary colors of light.
Colorimetry.ppt.pptx
Colorimetry uses the human eye to determine the concentration of colored species, while spectrophotometry uses instruments to make quantitative measurements beyond the visible range. This experiment demonstrates both techniques on dyes. Colorimetry involves visual observations of solutions and mixtures, while spectrophotometry uses a Spec-20 spectrophotometer to measure transmittance and absorbance according to Beer's law. The results will be plotted and analyzed.
Photometry
This document discusses photometry, which is a technique used to measure the concentration of a substance in solution by measuring how it absorbs, transmits, or emits light of a particular wavelength. It explains key concepts like absorbance, transmittance, Beer's law, and Lambert's law. The document compares colorimeters and spectrophotometers, noting that spectrophotometers use prisms rather than filters to isolate specific wavelengths, resulting in higher purity, sensitivity, and accuracy. Photometry is used to quantify substances that are inherently colored or can be made colored through chemical reactions.
Uv spectroscopy
This document provides an overview of UV-Visible Spectroscopy. It discusses the basic principles including electromagnetic radiation, interaction of radiation with matter, and electronic transitions. It describes Beer-Lambert's law and how absorbance is directly proportional to concentration and path length. Different types of electronic transitions like σ→σ*, n→σ*, π→π*, and n→π* are explained. Instrumentation components like radiation sources, monochromators, sample holders and detectors are briefly outlined. Key terms like chromophore, auxochrome, bathochromic shift, hypsochromic shift, hyperchromic effect and hypochromic effect are also defined.
2.5.2 Absorption In the last laboratory you noticed that thermal.docx
2.5.2 Absorption
In the last laboratory you noticed that thermal or electrical excitation of atoms caused electrons to be promoted to higher levels of lying energy. The subsequent relaxation of the excited electrons to their ground energy levels was followed by photon emissions in the visible electromagnetic spectrum field. The distinctive colors emitted during this relaxation phase can in some cases be used to classify the individual responsible for the spectrum of emissions. You will be turning this phenomenon around for the next two test times by using the absorption spectrum of a transition metal ion in aqueous solution. The transition metal ions are known to show a wide variety of colours. Yes, many transition metal ions are responsible for the colored pigments in paints, the color of gemstones such as rubies or sapphires and stained glass colors. Absorption spectra of chemical species (atoms, molecules or ions) are produced when a beam of electromagnetic energy (i.e. light) passes through a sample and a portion of the photons of electromagnetic energy passing through the sample is absorbed by the chemical species. A perfect example of this phenomenon is our understanding of colour. Consider the case where a ray of white light (i.e., sunlight) passes through a chlorophyll-containing sample solution (the compound responsible for leaf colour). In the blue and red regions of the visible portion of the electromagnetic spectrum the chlorophyll molecules absorb only a few select photons. The energies of such absorbed photons cause electrons to be excited in the chlorophyll molecule and the energy of these excited electrons is used in the plant cell to drive the conversion of carbon dioxide and water into glucose. More important for our purposes is that when the red and blue photons which chlorophyll absorbs are subtracted from white light, the resulting light beam that leaves the solution appears green to our eyes and this is why leaves appear green to us. If we were able to calculate the total number of photons of all colors entering the sample and compare it with the total number of photons of all the colors leaving the sample, we would find fewer photons exiting the sample than entering it. This is consistent with the fact that some of the photons from the white light beam that entered the solution were absorbed by the chlorophyll molecules.A spectrophotometer is an instrument for doing this measurement. Using some well-understood electronics this tool effectively "counts" the number of photons entering a sample and compares it to the number of photons leaving a sample. Moreover, the device is capable of taking white light and splitting it into its constituent colors (i.e. much like Copyright © 2010; John Hardesty and Bassam Attili Page 2 a prism), enabling the user to analyze the light absorption of different wavelengths with a resolution of almost 1 nm. In optics, the portion of physics which deals with light properties The Intensity, I,.
Chaprter 23 spectrophotometer
This document discusses principles of light measurement using spectroscopy. It describes how light is part of the electromagnetic spectrum, including visible light wavelengths between 380-780nm. It explains the units used to measure light, and the interactions between light and matter including transmittance, absorbance, reflection and scattering. Absorbance represents the amount of light absorbed by a sample and is calculated based on transmittance. A spectrophotometer is used to measure transmittance and absorbance, and contains a light source, wavelength selector, sample chamber and detector. Cuvettes hold liquid samples and their dimensions determine the light path length.
In biology studies, if we have any colored solutions, that means we .pdf
In biology studies, if we have any colored solutions, that means we can measure the
INTENSITY of the COLOR by spectrophotometry and relate it to the concentration of that
component (solute) at any given time. TRUE OR FALSE? Explain.
What is the range of numbers for absorbance in spectrophotometry? __ to ____ and What
number is beyond limit?
Explain the relationship between optical density and absorbance value.
Solution
True. Spectrophotometry uses photometers that can measure a light beam\'s intensity as a
function of its color (wavelength) known as spectrophotometers.It is used to measure the
transmttance of solutions. When a solution concentration is high, less light passes through it and
vice versa.
range of numbers for absorbance in spectrophotometry is 0 to 1.
Any value above 1 is beyond limit.
Optical density is directly proportional to absorbance value. The optical density of a substance is
the logarithmic ratio of the intensity of transmitted light to the intensity of the incident light
passing through the substance..
Introduction to spectroscopic methods
This document provides an introduction to spectrometric methods and the Beer-Lambert law. It defines key terms like absorbance, transmittance, molar absorptivity, and wavelength. The Beer-Lambert law states that absorbance is directly proportional to concentration, path length, and molar absorptivity. It also explains that absorbance follows a linear relationship with concentration at a given path length and wavelength for a single analyte. Deviations from Beer's law can occur under certain circumstances.
COLORIMETER. Principal an applications uses of calorimeter
principal and application of calorimeter, beers lambarts law, how to major lambda max, and how to use calorimeter,
Lab1-Spectrophotometry.ppt
This document introduces spectrophotometry and spectroscopy. It defines these terms as the study of light and matter interactions and using electromagnetic radiation to analyze light absorption by samples. Spectrophotometers measure absorption and spectroscopes measure emission. The document discusses the electromagnetic spectrum, how color is related to wavelength, Beer's Law which states absorbance is proportional to concentration, and how spectrophotometers are used to generate standardization graphs to determine unknown concentrations.
Spectrophotometry.pptx
Spectrophotometry involves using a spectrophotometer to measure how much light is absorbed by a sample at different wavelengths. It relies on Beer's Law, which states that absorbance is directly proportional to concentration, path length, and absorptivity. A spectrophotometer directs light from a source through a sample and measures the intensity of the transmitted light, allowing the absorbance and concentration of the sample to be determined. Spectrophotometry is used in various applications including chemistry, medicine, and environmental monitoring.
8b-EnzymeKinetics-Spec.pdf
A spectrophotometer measures the amount of light that passes through a solution, allowing quantification of light absorption. It works by focusing a light source through the solution and measuring the intensity of the transmitted light. Spectrophotometers are used to precisely measure absorbance, which is related to analyte concentration according to Beer's Law. They contain components that focus light, select wavelengths, hold samples, and detect transmitted light intensities.
An in Vitro Diagnostic Assays determine by using of Beer Lambert's Law - MATH...
The document discusses the principles of absorbance spectroscopy. It defines absorbance (A) as being dependent on molar absorptivity (ε), path length (b), and concentration (c). It also defines other related terms like transmittance (T) and discusses how absorbance is affected by factors like concentration, light scattering, and fluorescence. It briefly mentions applications to analytical chemistry and cell counting by fluorescence.
UV-Ultraviolet Visible Spectroscopy MANIK
Introduction, electromagnetic radiation, units, electromagnetic and absorption spectra, Lambert’s and Beer’s laws, deviations from Lambert’s–Beer’s law, chromophores and auxochromes, absorption and intensity shift, types of electronic transition, effects of solvents,
electronic transition in polyenes, instrumentation, colorimetry, Woodward-Fieser rules for
calculating absorption maximum, analysis of mixtures, applications of ultraviolet and visible
spectroscopy in quantitative analysis of drugs, use of ultra violet and visible spectroscopy in
structural analysis.
Basic uv spectroscopy
This document provides an overview of UV/Visible spectroscopy. It begins with definitions of spectroscopy and discusses the principles, including that spectroscopy involves measuring the absorption or emission of electromagnetic radiation by molecules as they change energy states. It also defines key terms like chromophores, auxochromes, and discusses different types of electronic transitions that can occur. The document then discusses instrumentation components like sources of radiation, collimating systems, monochromators, and detectors. It provides details on various types of sources, monochromators, and filters. In summary, the document provides a comprehensive introduction to the theory, applications, and instrumentation of UV/Visible spectroscopy.
Chapter 17 spectroscopy
Spectroscopy involves the interaction of electromagnetic radiation with matter. Spectroscopic methods are used to elucidate molecular structure and quantify inorganic and organic compounds. There are several regions of the electromagnetic spectrum used including X-ray, UV, visible, and IR. Important concepts include Beer's law, which states absorbance is proportional to concentration, molar absorptivity, and path length. Spectrophotometry is used for qualitative and quantitative analysis in areas such as determining unknown concentrations. Fluorescence also provides a sensitive technique where molecules emit light at longer wavelengths after absorbing radiation.
Chapter17spectroscopy 140707121322-phpapp01
Spectroscopy involves the interaction of electromagnetic radiation with matter. Spectroscopic methods are used to elucidate molecular structure and quantify inorganic and organic compounds. There are several regions of the electromagnetic spectrum used including X-ray, UV, visible, and IR. Important concepts include Beer's law, which states absorbance is proportional to concentration, molar absorptivity, and path length. Spectrophotometry is used for qualitative and quantitative analysis in areas such as determining unknown concentrations. Fluorescence also provides a sensitive technique where molecules emit light at longer wavelengths after absorbing radiation.
Thin Film Interference Jennifer Whetter
This LO presents conditions for constructive and destructive thin film interference. An example of thin film interference in butter fly wings with a worked solution is provided to assist in application of the concepts and demonstrate the real life applications of this topic.
COLORIMETER & LAMBERTS – BEER’S LAW.pptx
colorimeter is used in lab diagnostic medicine and is based on lamberts and beer s law. these ppts gives a clear view regarding the mentioned subject.
UV Visible Spectroscopy
UV-Visible Spectroscopy is a technique that uses light in the visible and adjacent ranges. It works based on how molecules absorb light at specific wavelengths. The document discusses the principles of UV-Vis spectroscopy including Beer's law, electronic transitions, chromophores and auxochromes. It also covers instrumentation components like light sources, monochromators, sample cells and detectors. Factors affecting absorption spectra are solvents, pH and conjugation. The technique has applications in analytical chemistry for identification and quantification of analytes.
Similar to what is the relationship between percent transmittance and the color o.docx (20)
2.5.2 Absorption In the last laboratory you noticed that thermal.docx
2.5.2 Absorption In the last laboratory you noticed that thermal.docx
In biology studies, if we have any colored solutions, that means we .pdf
In biology studies, if we have any colored solutions, that means we .pdf
COLORIMETER. Principal an applications uses of calorimeter
COLORIMETER. Principal an applications uses of calorimeter
An in Vitro Diagnostic Assays determine by using of Beer Lambert's Law - MATH...
An in Vitro Diagnostic Assays determine by using of Beer Lambert's Law - MATH...
More from earleanp
Create your own variant of both a hiring and a termination policy rela.docx
Create your own variant of both a hiring and a termination policy related to security and keeping company info secure.
Solution
Information Security management is a process of defining the security controls in order to protect the information assets.
Security Program
The first action of a management program to implement information security is to have a security program in place.
Security Program Objectives: Protect the company and its assets. Manage Risks by Identifying assets, discovering threats and estimating the risk. Objects are- Information Classification, Security Organization, and Security Education.
Security Management Responsibilities: Determining objectives, scope, policies,re expected to be accomplished from a security program. Evaluate business objectives, security risks, user productivity, and functionality requirements.
Approaches to Build a Security Program
Security Controls
Security Controls can be classified into three categories- Administrative Controls, Technical or Logical Controls ,Physical Controls.
The Elements of Security
Vulnerability: Vulnerability characterizes the absence or weakness of a safeguard that could be exploited.
Threat: Any potential danger to information or systems. A threat is a possibility that someone (person, s/w) would identify and exploit the vulnerability.
Risk: Risk is the likelihood of a threat agent taking advantage of vulnerability and the corresponding business impact. Reducing vulnerability and/or threat reduces the risk.
Exposure: An exposure is an instance of being exposed to losses from a threat agent. Vulnerability exposes an organization to possible damages.
Countermeasure or Safeguard: It is an application or a s/w configuration or h/w or a procedure that mitigates the risk.
The Relation Between the Security Elements Example: If a company has antivirus software but does not keep the virus signatures up-to-date, this is vulnerability. The company is vulnerable to virus attacks. The likelihood of a virus showing up in the environment and causing damage is the risk.
.
Determine the valuation of long-term liabilities- Donald Lennon is the.docx
Determine the valuation of long-term liabilities.
Donald Lennon is the president, founder, and majority owner of Wichita Medical Corporation, an emerging medical technology products company. Wichita is in dire need of additional capital to keep operating and to bring several promising products to final development, testing, and production. Donald, as owner of 51% of the outstanding stock, manages the company\'s operations. He places heavy emphasis on research and development and long-term growth. The other principal stockholder is Nina Friendly who, as a nonemployee investor, owns 40% of the stock. Nina would like to deemphasize the R&D functions and emphasize the marketing function to maximize short–run sales and profits from existing products. She believes this strategy would raise the market price of Wichita\'s stock.
All of Donald\'s personal capital and borrowing power is tied up in his 51% stock ownership. He knows that any offering of additional shares of stock will dilute his controlling interest because he won\'t be able to participate in such an issuance. But, Nina has money and would likely buy enough shares to gain control of Wichita. She then would dictate the company\'s future direction, even if it meant replacing Donald as president and CEO.
The company already has considerable debt. Raising additional debt will be costly, will adversely affect Wichita\'s credit rating, and will increase the company\'s reported losses due to the growth in interest expense. Nina and the other minority stockholders express opposition to the assumption of additional debt, fearing the company will be pushed to the brink of bankruptcy. Wanting to maintain his control and to preserve the direction of “his†company, Donald is doing everything to avoid a stock issuance and is contemplating a large issuance of bonds, even if it means the bonds are issued with a high effective–interest rate.
Instructions
Answer the following questions.
Who are the stakeholders in this situation?
What are the ethical issues in this case?
What would you do if you were Donald?
Solution
a)Donald and nina are the stakeholders in this situation .
b)Ethical issue involved in this case is to Raise additional funds by issue of stock or to raise additonal debts to meet fund requirement.
If funds are raised through issue of stock ,Donald stock ownership will be diluted and when bonds are issued ,it will be costlier to a company to raise additional funds.
c) Donald can either go for BOOTSTRAPPING where funds are raised by investing the retained earnings of a company and finding a means within a company.
Also Donald can also suggest Right issue of shares where shares are offered to existing shareholders at concessional price (lower than market) so that his ownership is not diluted.
.
Describe three of the following attack types in the Operation Security.docx
Describe three of the following attack types in the Operation Security domain: man-in-the-middle, mail bombing, war-dialing, ping-of-death, teardrop, and slamming-and-cramming
Solution
The description of the attack types in the operation security domain is given below:
1) man-in-the-middle: In this type of attack, the intruder insert himself or insert any malicious code between the secure communication of two parties. This malicious code act as an third party, and its get the secure information that is being transfer between the two parties. Its third person or the intruder having access to the information send by both the parties involve in the communication.
2) mail bombing : Its refer to attack in which intruder try to send bulk of mails to the person\'s system, which may cause to disk full on persons system or even can crash the server, which is handling the mails. In this type of attack, the main aim is to crash the user\'s machine by fulling the disk space or can crash or stop the mail server.
3) War dialing: In this type of attack, hacker\'s uses the modem\'s to dial the range of numbers, for finding the computer machiner, servers and other devices. and after dialing they also get access to these type of devices.
4) Ping to death : Its a type of attack, in which the hacker send the incorrect ping packet to the user. There are various computer system which are designed not to handle the incorrect ping packets. Which results into system crash or system going into the abnormal state.
5) teardrop: Its a type of attack, in which the hacker sends the packets in incorrect way or in the fragmented way, that the end user is not able to reassemble these packets at their end, and results into the system crash and denial of service at user\'s end.
6)slamming-and-cramming: slamming refers to the activity in which hacker, switches the long distance calll carrier at user\'s phone, without its permission, its results into heavy bill at customer end. Cramming refers to the attack in which some extra bill is added into user\'s actual phone bill, and its keep on happening again and again
.
Describes the concept of ADTS and illustrates the concept with three o.docx
Describes the concept of ADTS and illustrates the concept with three of the most common abstract data types.
Solution
An abstract data type is a set of values, some of which may be distinguished as constants, together with a collection of operations involving members of the set.The primary objective is to seperate the implementation of the abstract data types from their function.The program must know what the operations do.
List,stack and queues are three fundamental data structures.When you declare a variable in a .NET application, it allocates some chunk of memory in the RAM. This memory has three things: the name of the variable, the data type of the variable, and the value of the variable.Depending on the data type, your variable is allocated that type of memory. There are two types of memory allocation: stack memory and heap memory
Stack memory stores data types like int , double , Boolean etc. While heap stores data types like string and objects.Stack is used for static memory allocation and Heap for dynamic memory allocation, both stored in the computer\'s RAM .Variables allocated on the stack are stored directly to the memory and access to this memory is very fast.When a function or a method calls another function which in turns calls another function etc., the execution of all those functions remains suspended until the very last function returns its value. The stack is always reserved in a LIFO order.Variables allocated on the heap have their memory allocated at run time and accessing this memory is a bit slower, but the heap size is only limited by the size of virtual memory . Element of the heap have no dependencies with each other and can always be accessed randomly at any time. You can allocate a block at any time and free it at any time. This makes it much more complex to keep track of which parts of the heap are allocated or free at any given time.
The Queue works like FIFO system , a first-in, first-out collection of Objects. Objects stored in a Queue are inserted at one end and removed from the other. The Queue provide additional insertion, extraction, and inspection operations. We can Enqueue (add) items in Queue and we can Dequeue (remove from Queue ) or we can Peek (that is we will get the reference of first item ) item from Queue. Queue accepts null reference as a valid value and allows duplicate elements.
A list is a collection of items that can be accessed by index and provides functionality to search, sort and manipulate list items. This can store any data types to create a list.The List class can be used to create any type including a class. In this article, we will see how to create a list of a class with several properties.
.
Describe- manage- and install Active Directory replication- federation.docx
Describe, manage, and install Active Directory replication, federation services, and certificate services. Demonstrate the ability to plan an advanced AD, DHCP, and DNS solution. Describe and plan for configuring a domain and forest as well as configuring trusts. Use technology and information resources to research issues in advanced network infrastructure environments. Write clearly and concisely about advanced network infrastructure topics using proper writing mechanics and technical style conventions.
Solution
Active directory replication
Replication is the process by which the changes that are made on one domain controller are synchronized with all other domain controllers in the domain or forest that store copies of the same information. Active Directory replication uses a connection topology that is created automatically, which makes optimal use of beneficial network connections and frees the administrators from having to make such decisions.
Manage and install active directory replication
Active Directory relies on site configuration in sequence to manage and optimize the process of replication. Active Directory make available automatic configuration of these settings in some cases as well as configure site-related information for network using Active Directory Sites and Services. Configurable information includes settings for site links, site link bridges, and bridgehead servers.
Federation service:
Active Directory Federation Services (AD Federation Services) is a feature of the Windows Server operating system. It uses a claims-based access-control authorization model to maintain application security and to implement federated identity and aims to reduce the complexity around password management and guest account provisioning. AD Federation Services builds upon this functionality to authenticate users on third-party systems.
Certificate service
Active Directory Certificate Services (AD CS) provides customizable services for issuing and managing public key certificates used in software security systems that employ public key technologies. AD CS include Secure/Multipurpose Internet Mail Extensions (S/MIME), secure wireless networks, virtual private networks (VPN), Internet Protocol security (IPsec), Encrypting File System (EFS), smart card logon, Secure Socket Layer/Transport Layer Security (SSL/TLS) and digital signatures.
.
Describe the process to start and restart apache on CENTOS command lin.docx
Describe the process to start and restart apache on CENTOS command line. Also describe how to have apache start automatically when the server is rebooted.
Solution
In order to stop or restart the Apache HTTP Server, you must send a signal to the running httpd processes. There are two ways to send the signals. First, you can use the unix kill command to directly send signals to the processes. You will notice many httpd executables running on your system, but you should not send signals to any of them except the parent, whose pid is in the PidFile.
Start: Starting httpd using the apachectl control script sets the environmental variables in /etc/sysconfig/httpd and starts httpd. You can also set the environment variables using the init script.
You can also start httpd using /sbin/service httpd start. This starts httpd but does not set the environment variables. If you are using the default Listen directive in httpd.conf, which is port 80, you will need to have root privileges to start the apache server.
Restart:
Signal: HUP
apachectl -k restart
Sending the HUP or restart signal to the parent causes it to kill off its children like in TERM, but the parent doesn\'t exit. It re-reads its configuration files, and re-opens any log files. Then it spawns a new set of children and continues serving hits.
If you want your server to continue running after a system reboot, you should add a call to apachectl to your system startup files (typically rc.local or a file in an rc.N directory). This will start Apache as root. Before doing this ensure that your server is properly configured for security and access restrictions.
The apachectl script is designed to act like a standard SysV init script; it can take the arguments start, restart, and stop and translate them into the appropriate signals to httpd. So you can often simply link apachectl into the appropriate init directory. But be sure to check the exact requirements of your system.
.
Describe- in your own words- the mechanism for establishing a HTTPS co.docx
Describe, in your own words, the mechanism for establishing a HTTPS connection.
Solution
HTTPS consists of communication over HTTP (Hypertext Transfer Protocol) with an encrypted layer such as Transport Layer Security (TSL) or Secure Sockets Layer (SSL).
The connection between Client and Server using HTTPS is established by a handshake process which has 3 main phases namely Hello, Certificate exchange and key exchange.
a) Hello-
This is the first phase where the client sends a message ClientHello which contains all the necessary information such as various cipher suites, SSL version number etc. for the server to connect to the client via SSL. Then the server responds with a ServerHello message which contains similar information for client.
b) Certificate Exchange –
Once the contact is established between the Server and the Client, the server has to prove its identity to the client using its SSL certificate. The SSL certificate contains various information such as name of the owner, the domain it is attached to, the certificate’s public key, certificate’s validity dates etc. The client then verifies the certificate whether it is a trusted certificate or it is verified and trusted by one of several Certificate Authorities (CAs) which client trusts.
c) Key Exchange –
In this phase the exchange of encryption key is happened by the client and server using a symmetric algorithm which was already agreed during the Hello phase. The client generates a random key for the symmetric algorithm. It then encrypts the key using an algorithm (which was also agreed upon during the Hello phase) and the server’s public key from the SSL certificate. Client then sends this encrypted key to the server, where it is decrypted using the server’s private key.
Once the client and server have verified each over’s identity and have secretly agreed on a key to symmetrically encrypt the data that they are about to send each other, then the HTTP requests and responses can start flowing form one party to other in the form of a plaintext message with encryption. The other party using the key decrypt is while reading.
.
Describe the process of creating and exporting a schedule report for t.docx
Describe the process of creating and exporting a schedule report for the medicalpractice. What is the purpose of the schedule report?
Solution
Purpose of the Schedule report:
A shedule report is a task that lets you export data from one or more dash boards on one-time or recurring basis. The following are the main purposes that are considered mainly.
you can create and manage your own scheduled reports while viewing dashboards. A scheduled report has both a name and a schedule which is defined in the same way as scheduled in the import of a file. You can export the dashboard in a report to the same excel file has png image or url links to the dashboard. Other export formats are available depending on the addons you have installed. The exported data can be delivered to you via email attachment or has file stored on the disk.
Creating and exporting a schedule report for the medical practice:
When creating a new schedule report first view the Dashboard in that view the first dashboard that you want to include in your report ,Set any parameter controls on the dashboard to desired filter parameters, Now click schedule on the toolbar After that schedule report definition window is opened.
Steps:
1) Select the Create new schedule option in the Schedule Report Definition. In that click next to go the next step.
2) In this step enter the Report name and choose when to send the report by schedulling it. After that select a schedule type A dialy schedule,A Weekly schedule, A monthly Schedule, A custom schedule.
now click on the edit button besides your selected schedule type to launch define report schedule window. Click on next to goto next step.
3) choose the report file format from the drop down list microsoft excel, png image, link only. If you choose excel options click excel settings to set advanced excel export option then click next to goto next page.
4) This is the last step you have to set the delivery option for the report by first choosing the delivery method from that drop down list email, create files. After setting delivery optins click finish to complete the scheduled report definition window.
.
Describe the principal technologies that have shaped contemporary tele.docx
Describe the principal technologies that have shaped contemporary telecommunications systems. Compare Web 2.0 and Web 3.0. It has been said that within the next few years, smartphones will become the single most important digital device we own. Discuss the implications of this statement.
Solution
Describe the principal technologies that have shaped contemporary telecommunications systems.
Current networks have been influenced by the ascent of client-server computing, the use of packet switching, and the adoption of Transmission Control Protocol-Internet Protocol as a universal communications standard for linking disparate networks and computers, including the Internet. Protocol provides a mutual set of guidelines that enable communication among numerous components in a telecommunications network.
Compare Web 2.0 and Web 3.0. It has been said that within the next few years, smartphones will become the single most important digital device we own. Discuss the implications of this statement
Web2.0 refers to second-generation interactive Internet based services that enable people to collaborate, share information, and create new services online. Web2.0 is distinguished by technologies and services like cloud computing, software mashups and widgets, blogs, RSS, and wikis. These software applications run on the Web itself instead of the desktop and bring the vision of Web-based computing closer to realization. Web2.0 tools and services have fueled the creation of social networks and other online communities where people can interact with one another in the manner of their choosing.
Web3.0 focuses on developing techniques to make searching Web pages more productive and meaningful for ordinary people. Web3.0 is the promise of a future Web where all digital information and all contacts can be woven together into a single meaningful experience. Sometimes referred to as the semantic Web, Web3.0 intends to add a layer of meaning a top the existing Web to reduce the amount of human involvement in searching for and processing Web information. It also focuses on ways to make the Web more
.
Describe the typical duties of a security manager that are strictly ma.docx
Describe the typical duties of a security manager that are strictly managerial and not technical in nature.
Solution
Duties of a Security Mamger:
Write or review security-related documents, such as incident reports, proposals, and tactical or strategic initiatives.
Train subordinate security professionals or other organization members in security rules and procedures.
Plan security for special and high-risk events.
Review financial reports to ensure efficiency and quality of security operations.
Develop budgets for security operations.
Order security-related supplies and equipment as needed.
Coordinate security operations or activities with public law enforcement, fire and other agencies.
Attend meetings, professional seminars, or conferences to keep abreast of changes in executive legislative directives or new technologies impacting security operations.
Assist in emergency management and contingency planning.
Arrange for or perform executive protection activities.
Respond to medical emergencies, bomb threats, fire alarms, or intrusion alarms, following emergency response procedures.
Recommend security procedures for security call centers, operations centers, domains, asset classification systems, system acquisition, system development, system maintenance, access control, program models, or reporting tools.
Prepare reports or make presentations on internal investigations, losses, or violations of regulations, policies and procedures.
Identify, investigate, or resolve security breaches.
Monitor security policies, programs or procedures to ensure compliance with internal security policies, licensing requirements, or applicable government security requirements, policies, and directives.
Analyze and evaluate security operations to identify risks or opportunities for improvement.
Create or implement security standards, policies, and procedures.
Conduct, support, or assist in governmental reviews, internal corporate evaluations, or assessments of the overall effectiveness of the facilities security processes.
Conduct physical examinations of property to ensure compliance with security policies and regulations.
Communicate security status, updates, and actual or potential problems, using established protocols.
Collect and analyze security data to determine security needs, security program goals, or program accomplishments.
Supervise subordinate security professionals, performing activities such as hiring, training, assigning work, evaluating performance, or disciplining.
Plan, direct, or coordinate security activities to safeguard company assets, employees, guests, or others on company property.
.
Describe the four categories of international airports in the federal.docx
Describe the four categories of international airports in the federal classification of international airports.
Solution
Commercial Service Airports are publicly owned airports that have at least 2,500 passenger boardings each calendar year and receive scheduled passenger service. Passenger boardings refer to revenue passenger boardings on an aircraft in service in air commerce whether or not in scheduled service. The definition also includes passengers who continue on an aircraft in international flight that stops at an airport in any of the 50 States for a non-traffic purpose, such as refueling or aircraft maintenance rather than passenger activity. Passenger boardings at airports that receive scheduled passenger service are also referred to as Enplanements. Nonprimary Commercial Service Airports are Commercial Service Airports that have at least 2,500 and no more than 10,000 passenger boardings each year. Primary Airports are Commercial Service Airports that have more than 10,000 passenger boardings each year. Hub categories for Primary Airports are defined as a percentage of total passenger boardings within the United States in the most current calendar year ending before the start of the current fiscal year. For example, calendar year 2014 data are used for fiscal year 2016 since the fiscal year began 9 months after the end of that calendar year. The table above depicts the formulae used for the definition of airport categories based on statutory provisions cited within the table, including Hub Type described in 49 USC 47102. Cargo Service Airports are airports that, in addition to any other air transportation services that may be available, are served by aircraft providing air transportation of only cargo with a total annual landed weight of more than 100 million pounds. \"Landed weight\" means the weight of aircraft transporting only cargo in intrastate, interstate, and foreign air transportation. An airport may be both a commercial service and a cargo service airport. Reliever Airports are airports designated by the FAA to relieve congestion at Commercial Service Airports and to provide improved general aviation access to the overall community. These may be publicly or privately-owned. General Aviation Airports are public-use airports that do not have scheduled service or have less than 2,500 annual passenger boardings (49 USC 47102(8)). Approximately 88 percent of airports included in the NPIAS are general aviation.
.
Describe the major types of VPNs and technologies- protocols- and serv.docx
Describe the major types of VPNs and technologies, protocols, and services used to deploy VPNs. Also describe the business benefits of VPNs.
Solution
A virtual private network (VPN) is a technology that creates an encrypted connection over a less secure network. The benefit of using a VPN is that it ensures the appropriate level of security to the connected systems when the underlying network infrastructure alone cannot provide it. The justification for using a VPN instead of a private network usually boils down to cost and feasibility: It is either not feasible to have a private network (e.g., for a traveling sales rep) or it is too costly to do so. The most common types of VPNs are remote-access VPNs and site-to-site VPNs
A remote-access VPN uses a public telecommunication infrastructure like the Internet to provide remote users secure access to their organization\'s network. A VPN client on the remote user\'s computer or mobile device connects to a VPN gateway on the organization\'s network, which typically requires the device to authenticate its identity, then creates a network link back to the device that allows it to reach internal network resources (e.g., file servers, printers, intranets) as though it was on that network locally. A remote-access VPN usually relies on either IPsec or SSL to secure the connection, although SSL VPNs are often focused on supplying secure access to a single application rather than to the whole internal network. Some VPNs provide Layer 2access to the target network; these require a tunneling protocol like PPTP or L2TP running across the base IPsec connection.
A site-to-site VPN uses a gateway device to connect the entire network in one location to the network in another, usually a small branch connecting to a data center. End-node devices in the remote location do not need VPN clients because the gateway handles the connection. Most site-to-site VPNs connecting over the Internet use IPsec. It is also common to use carrier MPLS clouds rather than the public Internet as the transport for site VPNs. Here, too, it is possible to have either Layer 3 connectivity (MPLS IP VPN) or Layer 2 (Virtual Private LAN Service, or VPLS) running across the base transport.
VPNs can also be defined between specific computers, typically servers in separate data centers, when security requirements for their exchanges exceed what the enterprise network can deliver. Increasingly, enterprises also use VPNs in either remote-access mode or site-to-site mode to connect (or connect to) resources in a public infrastructure as a service environment. Newer hybrid-access scenarios put the VPN gateway itself in the cloud, with a secure link from the cloud service provider into the internal network.
.
Describe the different metrics that BGP can use in building a routing.docx
Describe the different metrics that BGP can use in building a routing table
Solution
The metrics used by BGP in building a routing table are
1) Weight — weight is the first criterion used by the router and it is set locally on the user’s router. The Weight is not passed to the following router updates. In case there are multiple paths to a certain IP address, BGP always selects the path with the highest weight. The weight parameter can be set either through neighbor command, route maps or via the AS-path access list.
2) Local Preference — this criterion indicates which route has local preference and BGP selects the one with the highest preference. Local Preference default is 100.
3) Network or Aggregate — this criterion chooses the path that was originated locally via an aggregate or a network, as the aggregation of certain routes in one is quite effective and helps to save a lot of space on the network.
4) Shortest AS_PATH — this criterion is used by BGP only in case it detects two similar paths with nearly the same local preference, weight and locally originated or aggregate addresses.
5) Lowest origin type — this criterion assigns higher preference to Exterior Gateway Protocol (EGP) and lower preference to Interior Gateway Protocol (IGP).
6) Lowest multi-exit discriminator (MED) — this criterion, representing the external metric of a route, gives preference to the lower MED value.
7) eBGP over iBGP — just like the “Lowest origin type†criterion, this criterion prefers eBGP rather than iBGP.
8) Lowest IGP metric — this criterion selects the path with the lowest IGP metric to the BGP next hop.
9) Multiple paths — this criterion serves as indication whether multiple routes need to be installed in the routing table.
10) External paths — out of several external paths, this criterion selects the first received path.
11) Lowest router ID — this criterion selects the path which connects to the BGP router that has the lowest router ID.
12) Minimum cluster list — in case multiple paths have the same router ID or originator, this criterion selects the path with the minimum length of the cluster list.
13) Lowest neighbor address — this criterion selects the path, which originates from the lowest neighbor address.
.
Describe the ethnic city and the benefit of ethnic communiti- (-I need.docx
Describe the ethnic city and the benefit of ethnic communiti? (. I need 4 paragraphs please .
Explain what you believe social justice meant to Progressive? ( 1 paragraph
Solution
1ans)
An ‘ethnic group’ has been defined as a group that regards itself or is regarded by others as a distinct community by virtue of certain characteristics that will help to distinguish the group from the surrounding community. Ethnicity is considered to be shared characteristics such as culture, language, religion, and traditions, which contribute to a person or group’s identity.
Ethnicity has been described as residing in:
• The belief by members of a social group that they are culturally distinctive and different to outsiders;
• Their willingness to find symbolic markers of that difference (food habits, religion, forms of dress, language) and to emphasized their significance
• Their willingness to organize relationships with outsiders so that a kind of ‘group boundary’ is preserved and reproduced
This shows that ethnicity is not necessarily genetic. It also shows how someone might describe themselves by an ethnicity different to their birth identity if they reside for a considerable time in a different area and they decide to adopt the culture, symbols and relationships of their new community.
It is worth noting that the Traveller Community is recognised as a distinct ethnic group in the UK and Northern Ireland, but only as a distinct cultural group in the Republic of Ireland.
Ethnicity is also a preferential term to describe the difference between humans rather than ‘race’. This is because race is a now a discredited term that divided all peoples based on the idea of skin colour and superiority. There is only one ‘race’, the human race as we are essentially genetically identical. For example, there is no French ‘race’ but the French people could be described as a separate ethnic group.
Advantages
Disadvantages
2ans)
Progressivism is a term commonly applied to a variety of responses to the economic and social problems that arose as a result of urbanization and the rapid industrialization introduced to America in the 19th Century. Progressivism began as a social movement to cope with a variety of social needs and eventually evolved into a reform movement and greater political action. The early progressives rejected Social Darwinism. In other words, they were people who believed that the problems society faced (poverty, poor health, violence, greed, racism, class warfare) could best be addressed by providing good education, a safer environment, an efficient workplace and honest government. Progressives lived mainly in the cities, were college educated, and believed that government could be a tool for change.
.
Describe the different types of qualitative analysis and indicate whic.docx
Describe the different types of qualitative analysis and indicate which is most persuasive.
Solution
A qualitative analysis or a research is based on the collection and analysis of non-numeric data like words or pictures. Qualitative methods have three distinct dimensions which are as follows:
1. Understanding Concept
2. Understanding People
3. Understanding Interaction
Four major types of qualitative research are:
1. Phenomenology - The analysis of data is done by getting access to individuals life-worlds, which is actually their world of experience. This can be done by conducting in-depth interviews. In this analysis the commonalities across individuals are sought. Once the data is collected it will be analyzed and report will be prepared based on the collected data and understandings.
2. Ethonography - It is a analysis based on the study of a group of people based on their culture. People from same or similar culture share beliefs, customs, rituals, practices and language norms. This will be highly effective in analyzing data qualitatively. The data that are collected in this method of analysis are based on the cultural standards, insider\'s perspective, external and social scentific view.
3. Grounded Theory - Here the analysis is based on the theoretical approach. The major characteristics of grounded theory are Fit, Understanding, Generality and control. Theories provide explanation and they tell us how and why of any situiation.
4. Case Study - In this analysis the various cases are considered and in-depth analysis is performed to study the variations and deviations.
In all the above steps Data coding and analysis takes place. Data Analysis is done in three different steps and they are:
1. Open Coding -Â Â Reading transcripts
2. Axial Coding - Organizing concepts
3. Selective Coding - Focusing on main ideas
Phenomenology is the most pursuasive method of qualitative analysis since the data is sought directly from the individuals. Hence this can be relied upon thoroughly.
.
Describe neo-evolution- What is it and what are its primary tenets- Pr.docx
Describe neo-evolution. What is it and what are its primary tenets?
Provide an example of a technology that is altering or may alter human evolution.
What are the potential benefits of this type of technology?
What are the potential drawbacks?
What are the moral and ethical implications of neo-evolution?
Should we continue to pursue this form of technology? Why or why not?
Solution
oevolutionism , school of anthropology concerned with long-term culture change and with the similar patterns of development that may be seen in unrelated, widely separated cultures. It arose in the mid-20th century, and it addresses the relation between the long-term changes that are characteristic of human culture in general and the short-term, localized social and ecological adjustments that cause specific cultures to differ from one another as they adapt to their own unique environments. Further, neoevolutionists investigate the ways in which different cultures adapt to similar environments and examine the similarities and differences in the long-term historical trajectories of such groups. Because most neoevolutionists are interested in the environmental and technological adjustments of the groups they study, many are identified with the cultural ecological approach to ethnography, with the culture process approach to archaeology, and with the study of early and protohumans in biological anthropology.
Neoevolutionary anthropological thought emerged in the 1940s, in the work of the American anthropologists Leslie A. White and Julian H. Steward and others. White hypothesized that cultures became more advanced as they became more efficient at harnessing energy and that technology and social organization were both influential in instigating such efficiencies. Steward, inspired by classifying the native cultures of North and South America, focused on the parallel developments of unrelated groups in similar environments; he discussed evolutionary change in terms of what he called “levels of sociocultural integration†and “multilinear evolution,†terms he used to distinguish neoevolution from earlier, unilineal theories of cultural evolution.
In the years since White’s and Steward’s seminal work, neoevolutionary approaches have been variously accepted, challenged, rejected, and revised, and they continue to generate a lively controversy among those interested in long-term cultural and social change.
.
Describe ip protocol security pros and cons-SolutionIP Protocol Securi.docx
Describe ip protocol security pros and cons.
Solution
IP Protocol Security:
Internet Protocol Security ( IPsec ) is a protocol suite for secure Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session. IPsec can be used in protecting data flows between a pair of hosts ( host-to-host ), between a pair of security gateways ( network-to-network ), or between a security gateway and a host ( network-to-host ).
Security architecture:
Pros of IPsec:
·Security at the Network Layer Level - Being based at the network level, this technology is completely invisible in its operation . The end users are never required to learn about it, and neither do they ever directly interact with it. This in itself is an added layer of security for the VPNs running on IPsec.
·No Application Dependence - While SSL-/ SSH-/ PGP-based VPNs are application-dependent, IPsec-based VPNs do not need to worry about application dependence. Since the entire security system is implemented at the network level, there are no application compatibility issues.
Cons of IPsec:
·CPU Overhead - Having to perform encryption and decryption on the hundreds of megabytes of data flowing through the machines requires quite a bit of processing power, and this translates to higher processor loads .
·Compatibility Issues - IPsec is a standardized solution today, and yet, some large software developers may not adhere to it, and may go ahead with standards of their own. As a result, this can lead to compatibility issues .
·Broken Algorithms - Some of the security algorithms that are still being used in IPsec have already been cracked. This poses a huge security risk, especially if the network administrators unknowingly use those algorithms instead of newer, more complex ones that are already available.
.
Describe core competencies and their relationship to operations manage.docx
Describe core competencies and their relationship to operations management. Please provide an example for a manufacturing environment and a service environment.
Solution
core competency fullfills three key criteria:
A core competency can take various forms, including technical/subject matter know-how, a reliable process and/or close relationships with customers and suppliers. It may also include product development or culture, such as employee dedication, best Human Resource Management (HRM), good market coverage, or kaizen or continuous improvement over time.
Core competencies are particular strengths relative to other organizations in the industry, which provide the fundamental basis for the provision of added value. Core competencies reflect the collective learning of an organization and involve coordinating diverse production skills and integrating multiple streams of technologies. It includes communication, involvement, and a deep commitment to working across organizational boundaries, such as improving cross-functional teams within an organization to address boundaries and to overcome them. Few companies are likely to build world leadership in more than five or six fundamental competencies.
As an example of core competencies, Walt Disney World Parks and Resorts has three main core competencies:
core competencies their relationship to operations management
Operations management is an area of management concerned with overseeing, designing, and controlling the process of production and redesigning business operations in the production of goods or services. It involves the responsibility of ensuring that business operations are efficient in terms of using as few resources as needed, and effective in terms of meeting customer requirements.
Core competencies are the collective learning in the organization, especially how to coordinate diverse production skills and integrate multiple streams of technologies.It embodies an organization
.
Describe in detail a man-in-the-middle attack on the Diffie-Hellman ke.docx
Describe in detail a man-in-the-middle attack on the Diffie-Hellman key-exchange protocol whereby the adversary ends up sharing a key k A with Alice and a different key k B with Bob, and Alice and Bob cannot detect that anything has gone wrong.
What happens if Alice and Bob try to detect the presence of a man-in-the-middle adversary by sending each other (encrypted) questions that only the other party would know how to answer?
Solution
In man-in-the-middle attack, an opponent Eve intercepts Alice\'s public key K A and sends her own public key as K A to Bob. When Bob transmits his public key K B , Eve substitutes it with her own and sends it as K B to Alice. Eve and Alice thus agree on one shared key and Eve and Bob agree on another shared key. After this exchange, Eve simply decrypts any messages sent out by Alice or Bob, and then reads and possibly modifies them before re-encrypting with the appropriate key and transmitting them to the other party. This vulnerability is present because Diffie-Hellman key exchange does not authenticate the participants. The man-in-the-middle attack may be prevented by using digital signatures and other cryptographic schemes.
Bob to encrypt a message so that only Alice will be able to decrypt it, with no prior communication between them other than Bob having trusted knowledge of Alice\'s public key. Alice\'s public key is
g K A mod p, g,p. . To send her a message, Bob chooses a random K B and then sends Alice g K B mod p
together with the message encrypted with ( g K A ) K B mod p symmetric key. Only Alice can determine the symmetric key and hence decrypt the message because only she has K A.
.
Describe events that led to the signing of the Homeland Security Act 2.docx
Describe events that led to the signing of the Homeland Security Act 2002 into law on November 25, 2002. What was the intent of this Act and what department did it create? How did the Act change FEMA’s emergency response role? Several agencies resisted efforts to be incorporated in the new department. Identify three such agencies and explain why they may have been reluctant to join. Do you agree?
Solution
Department of Homeland Security (DHS) was formed during the incorporation of all or part of 22 various federal departments into a united, incorporated Department. It was initiated to make the Americans safe.
The President of America says to form a novel DHS, by considering all the departments into a single to safeguard the America under the name of DHS. It is the strategic plan applied by him after the terrorist attack in pennenslavia.
The DHS mission is to keep the Americans safe from any of the attacks.
Blue campaign and citizen corps involved in the Department of Homeland security.
The Blue Campaign gives its support to the DHS and believe that every people has a right to have a freedom and then it combines with other NGO’s, to fulfill its belief.
The mission of Citizen Corps is to bind the people of Americans to enhance their knowledge with education, providing training centers, and volunteer service to make people strong and prepare them how to handle situations when they were troubles or attacks by other or some other natural disasters occurs.
The Federal Emergency Management Agency (FEMA) is an organization of theUnited States Department of Homeland Security, initially created by Presidential Reorganization Plan No. 3 of 1978 and implemented by twoExecutive Orders on April 1, 1979.The goal is to organize the reply to a disasters that has happened in the US and then provide the funds to local and state government. The governer from that state that is where the disaster took place is the right person to intimate to the FEMA and to president
.
More from earleanp (20)
Create your own variant of both a hiring and a termination policy rela.docx
Create your own variant of both a hiring and a termination policy rela.docx
Determine the valuation of long-term liabilities- Donald Lennon is the.docx
Determine the valuation of long-term liabilities- Donald Lennon is the.docx
Describe three of the following attack types in the Operation Security.docx
Describe three of the following attack types in the Operation Security.docx
Describes the concept of ADTS and illustrates the concept with three o.docx
Describes the concept of ADTS and illustrates the concept with three o.docx
Describe- manage- and install Active Directory replication- federation.docx
Describe- manage- and install Active Directory replication- federation.docx
Describe the process to start and restart apache on CENTOS command lin.docx
Describe the process to start and restart apache on CENTOS command lin.docx
Describe- in your own words- the mechanism for establishing a HTTPS co.docx
Describe- in your own words- the mechanism for establishing a HTTPS co.docx
Describe the process of creating and exporting a schedule report for t.docx
Describe the process of creating and exporting a schedule report for t.docx
Describe the principal technologies that have shaped contemporary tele.docx
Describe the principal technologies that have shaped contemporary tele.docx
Describe the typical duties of a security manager that are strictly ma.docx
Describe the typical duties of a security manager that are strictly ma.docx
Describe the four categories of international airports in the federal.docx
Describe the four categories of international airports in the federal.docx
Describe the major types of VPNs and technologies- protocols- and serv.docx
Describe the major types of VPNs and technologies- protocols- and serv.docx
Describe the different metrics that BGP can use in building a routing.docx
Describe the different metrics that BGP can use in building a routing.docx
Describe the ethnic city and the benefit of ethnic communiti- (-I need.docx
Describe the ethnic city and the benefit of ethnic communiti- (-I need.docx
Describe the different types of qualitative analysis and indicate whic.docx
Describe the different types of qualitative analysis and indicate whic.docx
Describe neo-evolution- What is it and what are its primary tenets- Pr.docx
Describe neo-evolution- What is it and what are its primary tenets- Pr.docx
Describe ip protocol security pros and cons-SolutionIP Protocol Securi.docx
Describe ip protocol security pros and cons-SolutionIP Protocol Securi.docx
Describe core competencies and their relationship to operations manage.docx
Describe core competencies and their relationship to operations manage.docx
Describe in detail a man-in-the-middle attack on the Diffie-Hellman ke.docx
Describe in detail a man-in-the-middle attack on the Diffie-Hellman ke.docx
Describe events that led to the signing of the Homeland Security Act 2.docx
Describe events that led to the signing of the Homeland Security Act 2.docx
Recently uploaded
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaDRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdPollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcPCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Introduction to AI for Nonprofits with Tapp Network
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Recently uploaded (20)
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Introduction to AI for Nonprofits with Tapp Network
Introduction to AI for Nonprofits with Tapp Network
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
what is the relationship between percent transmittance and the color o.docx
- 1. what is the relationship between percent transmittance and the color of the solutions what is the relationship between percent transmittance and the color of the solutions what is the relationship between percent transmittance and the color of the solutions Solution A) The percent transmittance is defined as the amount of light that passes through a sample. The percent transmittance and absorbance are related by the following equation: Absorbance = -log (percent transmittance/100). Higher absorbance is directly proportional to lower transmittance. A measure of the extent to which a substance transmits light or other electromagnetic radiation is known as absorbance. ( i.e. the colour of solution - a substance show colour when it transit light and the substance which do not transmit any light they appear black. ) B) The basic relationship is between absorbance and concentration A = ebc ... where A = absorbance, e = molar absorptivity, b = path length, c = concentration in moles per liter Transmittance (T) = percent T / 100 A = log (1/T) or A = 2 - log(%T) 10^A = 1/T T = 10^-A %T = 100(10^-A)