What is broadbandWhat is the potential for broadband wireless syste.pdf
•
0 likes•2 views
What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us Solution What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us.
Report
Share
Report
Share
Download to read offline
Recommended
Comparative Study of Optic Fibre and Wireless Technologies in Internet Connec...
Most of the activities going on in the world today demand information and data sharing in one form or the other.
Consequently, the Internet and its connectivity has gradually become a household concern. The connection to the Internet requires
physical transfer of signal (data/information) from one point to another. This can either be through physical medium (wire) or through
the air (wireless). This paper a comparative study of Fiber Optics and Wireless Technologies in Internet connectivity seeks to identify
which of the two technologies is better for signal transmission in terms of bandwidth utilization, performance, reliability, cost
effectiveness, resilience, and security. The study adopted the use of secondary sources for the sourcing of materials. A lot of journal
articles, research publications, testbooks, white papers and many more were critically studies and comparatively analysed. It was clear
that both media have hitches and challenges. The study showed that although initial cost of acquisition is an inhibitive factor for fibre
optic connection, unlimited bandwidth delivery and high Quality of Service (QoS) placed Fiber optics above wireless connectivity in
their overall performance.
Integrated Optical Wireless Network For Next Generation Wireless Systems
Next generation wireless networks need to support broadband wireless services at significantly reduced cost. The existing wireless systems can hardly provide transmission capacity of the order of few Mbps. However, millimeter waves and optical fiber can provide data capacity of the order of Gbps and Tbps respectively. Hence the requirements of broadband wireless system can be achieved through the integration of optical fiber and millimeter wireless systems. We suggest modified millimeter wireless system, with optical fiber as feeder network. Simulations have been carried out for AWGN and optical fiber channels using MATLAB code, so as to compare their individual performance. When compared it is observed that the performance of multimode optical fiber (MMOF) link even for distance of 80 KM is better than that of the AWGN channel with SNR of 50 dB and above. Hence, an integrated fiber radio network is an excellent cost effective media for higher data rate (>100Mbps).
DCO MP.pptx
This document introduces wireless communication and its applications in robotics. It discusses how wireless communication allows information to be transmitted over distances without physical connections like wires. It then describes some common wireless communication systems used in everyday life such as mobile phones, GPS, and Wi-Fi. The document proceeds to explain different wireless media types including radio waves, microwaves, and infrared waves. It concludes by discussing how wireless technologies like Wi-Fi, Bluetooth, satellite communication and voice control can be used in robotics applications.
Frontiers of wireless and mobile communications v0.02
The document discusses a paper on frontiers in wireless technology. It describes how wireless transmission has reached billions of bits per second and mobile services have become internet-based. Emerging technologies like dynamic spectrum access, software-defined radio and MIMO have the potential to increase radio link speeds from MBps to GBps and support new networking concepts. The paper examines the impact of these wireless techniques on audiovisual and multimedia applications.
Sm2 Network Connections
The document discusses different types of network connections and factors that influence efficiency. It covers:
1. Types of access such as direct access through a LAN or remote access via phone line, cable, or wireless.
2. Transmission media including twisted-pair cables, coaxial cables, fiber-optic cables, and wireless options like Wi-Fi, infrared, and Bluetooth. Fiber-optic cables provide the fastest transmission speeds.
3. Types of connections including phone lines with modems, broadband connections through DSL or cable modems, and wireless or satellite options. Bandwidth determines data transfer rates.
Lecture 1 - Introduction to Course & Course outline.pptx
This document provides an introduction and course outline for a Wireless Communications course. It outlines 5 sections that will be covered: Basics of Wireless Communications, Radiowave propagation characteristics, Fundamentals of Cellular Communication, Mobile Communication Systems (2G-4G), and Wireless Communications of the future. It discusses why wireless communication is important and provides an overview of the history and applications of wireless technologies. It also highlights the growth of mobile data usage and the increasing importance of wireless networks. Students will complete an independent study project on an application of wireless communications.
Pocket Guide for SDH Fundamentals Volume 1
1) Johann Philipp Reis invented the telephone in 1861 with his first spoken message over his new invention. However, the first usable telephone was invented by Alexander Graham Bell in 1876.
2) There are now over 750 million telephone connections worldwide and internet usage has exploded in recent years, with forecasts of nearly 500 million internet users by 2000.
3) New digital technologies like pulse code modulation and synchronous digital hierarchy have enabled increased network capacity and efficiency to cope with rising demand. SDH in particular has provided a standardized, economical, and reliable infrastructure for global telecommunications.
Mi0035 computer networks
Dear students get fully solved assignments
Send your semester & Specialization name to our mail id :
help.mbaassignments@gmail.com
or
call us at : 08263069601
Recommended
Comparative Study of Optic Fibre and Wireless Technologies in Internet Connec...
Most of the activities going on in the world today demand information and data sharing in one form or the other.
Consequently, the Internet and its connectivity has gradually become a household concern. The connection to the Internet requires
physical transfer of signal (data/information) from one point to another. This can either be through physical medium (wire) or through
the air (wireless). This paper a comparative study of Fiber Optics and Wireless Technologies in Internet connectivity seeks to identify
which of the two technologies is better for signal transmission in terms of bandwidth utilization, performance, reliability, cost
effectiveness, resilience, and security. The study adopted the use of secondary sources for the sourcing of materials. A lot of journal
articles, research publications, testbooks, white papers and many more were critically studies and comparatively analysed. It was clear
that both media have hitches and challenges. The study showed that although initial cost of acquisition is an inhibitive factor for fibre
optic connection, unlimited bandwidth delivery and high Quality of Service (QoS) placed Fiber optics above wireless connectivity in
their overall performance.
Integrated Optical Wireless Network For Next Generation Wireless Systems
Next generation wireless networks need to support broadband wireless services at significantly reduced cost. The existing wireless systems can hardly provide transmission capacity of the order of few Mbps. However, millimeter waves and optical fiber can provide data capacity of the order of Gbps and Tbps respectively. Hence the requirements of broadband wireless system can be achieved through the integration of optical fiber and millimeter wireless systems. We suggest modified millimeter wireless system, with optical fiber as feeder network. Simulations have been carried out for AWGN and optical fiber channels using MATLAB code, so as to compare their individual performance. When compared it is observed that the performance of multimode optical fiber (MMOF) link even for distance of 80 KM is better than that of the AWGN channel with SNR of 50 dB and above. Hence, an integrated fiber radio network is an excellent cost effective media for higher data rate (>100Mbps).
DCO MP.pptx
This document introduces wireless communication and its applications in robotics. It discusses how wireless communication allows information to be transmitted over distances without physical connections like wires. It then describes some common wireless communication systems used in everyday life such as mobile phones, GPS, and Wi-Fi. The document proceeds to explain different wireless media types including radio waves, microwaves, and infrared waves. It concludes by discussing how wireless technologies like Wi-Fi, Bluetooth, satellite communication and voice control can be used in robotics applications.
Frontiers of wireless and mobile communications v0.02
The document discusses a paper on frontiers in wireless technology. It describes how wireless transmission has reached billions of bits per second and mobile services have become internet-based. Emerging technologies like dynamic spectrum access, software-defined radio and MIMO have the potential to increase radio link speeds from MBps to GBps and support new networking concepts. The paper examines the impact of these wireless techniques on audiovisual and multimedia applications.
Sm2 Network Connections
The document discusses different types of network connections and factors that influence efficiency. It covers:
1. Types of access such as direct access through a LAN or remote access via phone line, cable, or wireless.
2. Transmission media including twisted-pair cables, coaxial cables, fiber-optic cables, and wireless options like Wi-Fi, infrared, and Bluetooth. Fiber-optic cables provide the fastest transmission speeds.
3. Types of connections including phone lines with modems, broadband connections through DSL or cable modems, and wireless or satellite options. Bandwidth determines data transfer rates.
Lecture 1 - Introduction to Course & Course outline.pptx
This document provides an introduction and course outline for a Wireless Communications course. It outlines 5 sections that will be covered: Basics of Wireless Communications, Radiowave propagation characteristics, Fundamentals of Cellular Communication, Mobile Communication Systems (2G-4G), and Wireless Communications of the future. It discusses why wireless communication is important and provides an overview of the history and applications of wireless technologies. It also highlights the growth of mobile data usage and the increasing importance of wireless networks. Students will complete an independent study project on an application of wireless communications.
Pocket Guide for SDH Fundamentals Volume 1
1) Johann Philipp Reis invented the telephone in 1861 with his first spoken message over his new invention. However, the first usable telephone was invented by Alexander Graham Bell in 1876.
2) There are now over 750 million telephone connections worldwide and internet usage has exploded in recent years, with forecasts of nearly 500 million internet users by 2000.
3) New digital technologies like pulse code modulation and synchronous digital hierarchy have enabled increased network capacity and efficiency to cope with rising demand. SDH in particular has provided a standardized, economical, and reliable infrastructure for global telecommunications.
Mi0035 computer networks
Dear students get fully solved assignments
Send your semester & Specialization name to our mail id :
help.mbaassignments@gmail.com
or
call us at : 08263069601
Ch#3.pptx
The document discusses signals carried over telecommunications networks. It covers:
1) Different types of information transmitted including voice, video, text, and files with varying bandwidth and loss tolerance requirements.
2) Analog and digital signals, with digital transmission becoming more common due to advantages like reliability and cost.
3) Pulse code modulation is introduced as the standardized digital encoding method used in telephone networks to convert analog signals to digital for transmission.
Frontiers of Wireless and Mobile Communications
This document discusses emerging wireless technologies and their impact. It provides an overview of key technologies like MIMO, cooperative communications, and dynamic spectrum access. It summarizes the evolution of radio technologies from 2G to 4G standards and increasing link speeds. It also examines short-range wireless technologies and research challenges in building cognitive radios and software-defined radios to efficiently utilize spectrum.
5 g link budget
This document provides an overview of millimeter wave (mmWave) communications for 5G wireless networks, with a focus on propagation models. It discusses key concepts of 5G including the use of mmWave spectrum to provide multi-Gbps data rates. The document compares propagation parameters and channel models from various standardization bodies in the 0.5-100 GHz range. It summarizes recent work on measurements and models of path loss, penetration loss, and more for 5G mmWave channels across different scenarios.
Community owned networks - connectivity solution for Africa
Cellular connectivity has provided impressive Internet growth in Africa over the past decade, but according to the ITU, in 2017, Africa only had 20% of the population using the Internet; a laggard compared to 40% in Asia & the Pacific and the 50% world average. We have connected the easy half of the population and connecting the next half of the world will require new innovative thinking.
This presentation looks at the current challenges to overcome and building blocks that can help community owned networks grow. It studies radio infrastructure, spectrum sharing and localized services all underpinned by the right regulation and skills.
A Review on Cooperative Communication Protocols in Wireless World
Future generations of cellular communications requires higher data rates and a more reliable
transmission link with the growth of multimedia services, while keeping satisfactory quality of service, .
MIMO antenna systems have been considered as an efficient approach to address these demands by
offering significant multiplexing and diversity gains over single antenna systems without increasing
bandwidth and power. Although MIMO systems can unfold their huge benefit in cellular base stations,
but they may face limitations when it comes to their deployment in mobile handsets.
To overcome this drawback, relays (fixed or mobile terminals) can cooperate to improve the overall
system performance in cellular networks. Cooperative communications can efficiently combat the severity
of fading and shadowing through the assistance of relays. It has been found that using relays the capacity
and coverage of cellular networks can be extended without increasing mobile transmit power or
demanding extra bandwidth.
AWMCN-1.pptx
This document provides an introduction to an advanced wireless and mobile computing networks course. It outlines the course objectives which include familiarizing students with state-of-the-art wireless networks, relevant data transmission techniques, radio localization, and cellular communication concepts. It also provides an overview of the course contents, textbook, grading scheme, and expectations. The instructor is identified and contact information is provided.
17._CS-12-Networking-1_Evolution_of_Network_1.docx
The document provides details about a computer networking lesson plan, including the expected learning outcomes, teaching activities, resources, and assessments. The lesson will cover the evolution of networking from ARPANET to the internet, switching techniques like circuit and packet switching, networking terminology such as bandwidth, and transmission media including wired and wireless options. Students will learn about these topics through a presentation, videos, worksheets, quizzes and assignments using provided question banks and resources.
Networking Terminology
This document discusses networking technology and computer networks. It defines key concepts like data communication, transmission modes, communication media, computer network components and services. Data can flow in simplex, half-duplex or full-duplex transmission modes. Communication media includes bounded media like twisted pair cables and coaxial cables, and unbounded media like wireless transmission methods. Computer networks allow interconnected computers to share resources and communicate. Basic network services include file, print, message and application services.
Path-loss prediction of GSM signals in warri
This document provides background information on wireless communication and propagation models. It discusses how wireless communication has evolved from early forms using drums and smoke signals to modern cellular networks. The cellular principle is described, where coverage areas are divided into cells served by low-power transmitters to improve capacity and frequency reuse. Frequency reuse allows the same frequencies to be used in cells spaced apart without interference. The document aims to compare the accuracy of free-space and HATA propagation models in urban, suburban, and rural areas of Warri, Nigeria.
Laser Broadband By Sumita Giri
The document discusses laser broadband technology from NASA. It begins with an introduction to lasers and broadband internet. NASA's role is to demonstrate laser communication relay in space, which could increase data rates 100x over traditional radio frequency. This laser broadband technology is needed to provide high-speed internet access and lower the costs of commercial satellite communication. It works by transmitting laser pulses through fiber optic cables. Future uses include faster wireless communication and mobile data downloads. Some advantages are high speeds up to 20x faster and lower energy use, though a laser modem would need to be synced each time.
Facebook Connectivity Lab
Facebook is working to connect the world through various technologies including drones, satellites, and free space optics. Their goal is to provide affordable basic internet access globally. They are developing solutions tailored to different population densities, such as high altitude drones for medium density areas and satellites for low density areas. Challenges include overcoming the physics of signal loss over distance for aerial platforms and the high costs of satellite deployment.
Ramudoc 140228112714-phpapp01
This document discusses stratellites, which are proposed as an alternative to communication towers and satellites. Stratellites would be large balloons stationed in the stratosphere at an altitude of around 20 km. Each stratellite could provide coverage over an area of 300,000 square miles, replacing the need for hundreds of towers. They have advantages over satellites such as lower latency and lower launch costs. Potential applications include broadband internet access, telecommunications networks, and remote sensing. However, stratellites also face challenges such as weather and technical issues that need to be addressed.
A Master of ScienceProject Report Optical cmms-oaa516
This document is a project report submitted by a student for their Master of Science degree. It investigates advanced methods of multiplexing for future terabit optical communications by comparing and analyzing the tolerance of optical orthogonal frequency-division multiplexing (OFDM) to effects such as dispersion and nonlinearity. The report includes an abstract, table of contents, introduction providing background on optical communications and specifying the project aim and objectives, and chapters on historical background, advanced multiplexing methods with a focus on OFDM, simulating an optical OFDM system using MATLAB, and concluding remarks.
Chapter 1.pptx
- The document discusses key concepts in wireless technologies including wireless transmission fundamentals, global cellular networks, broadband wireless, Bluetooth, and future trends such as WiMAX, Mobile-Fi, ZigBee, and Ultrawideband.
- It covers analog and digital signaling and transmission, channel capacity, advantages and disadvantages of wireless communication, and types of wireless communication systems including Bluetooth applications and usage.
stratellite document
This document discusses stratellites, which are high-altitude airships that can be used for wireless communication networks instead of satellites or cell towers. Stratellites are unmanned balloons filled with helium that hover in the stratosphere at around 20 km altitude using solar-powered propellers. Each stratellite can service an area of 300,000 square miles. They have advantages over satellites such as lower latency, lower launch costs, and the ability to provide high-speed broadband access to remote areas. Some potential applications include providing national wireless broadband networks for voice, video, and internet access.
1) What role does bandwidth play in the successful delivery of the A.pdf
1) What role does bandwidth play in the successful delivery of the Advanced Mobile
Communications and Information System?
2) When does functionality transform the standard BlackBerry device into an Advanced Mobile
Communications and Information System?
3)Describe three telecommunications and network technologies used to connect the BlackBerry
with other devices.
4)At this stage in the process, what actions might Sandra and Josh take to reduce the overall
costs of the Advanced Mobile Communications and Information System?
Solution
1) Bandwidth is directly proprtional to speed of receiving abd sending data. More bandwidth
means quicker data will be able to be sent and received through the network. A sufficient amount
of bandwidth will be required to satisfy both synchronous and asynchronous forms of voice and
text communications. In addition, to be able to provide two-way data communications for
interacting with corporate information systems without interruption of buffering, it will require a
decent amount of bandwidth. Therefore, they will need to have enough bandwidth that will
satisfy all communications and data transfers through the network.
2) A standard Blackberry transforms to an Advanced Mobile Communications and Information
System instantaneously.
3) BlackBerry will include
4) They first need to decide on how much they are willing to spend on the Advanced Mobile
Communications and Information System (AMIS). After that they should discuss what
functionalities they want the AMIS to have that is feasible involving the cost. Accordingly they
should research on best provider of these in least cost..
Physical transmission media Presentation slides
Learn Computer Networking Physical transmission media topic
Presentation slides of Subject Information Technology.
PPT-DC.pptx
This document provides an overview of the ECE5XX course on Principles of Digital Communications Systems. The course aims to provide a comprehensive coverage of digital communication theory and design at a graduate level. The first half will cover theoretical foundations, and the second half will cover advanced techniques. Key topics include optimal receiver design, signaling, multiple access techniques like CDMA and OFDM, and MIMO systems. Students are expected to understand digital communication principles and design optimal receivers. Evaluation will be based on exams, assignments, a project, and a paper presentation.
Presentation1.pptx
This document provides an overview of a talk on future trends in 5G and 6G wireless technology. It discusses the evolution from 1G to 5G mobile networks and the key capabilities of 5G such as speeds up to 1 Gbps. 6G is envisioned to enable holographic communication, be integrated with AI, and support a wide range of new applications through delivering ultra-high reliability and low latency. Critical research areas for 6G include new spectrum bands, advanced physical layer techniques like holographic radio, and achieving the key performance targets needed for services like telepresence.
Telecommunication Systems: How is Technology Change Creating New Opportunitie...
These slides discuss how improvements in the data rates of wireline and wireless systems have and continue to occur. For wireline systems, these improvements are driven by the use of better glass fiber, lasers, amplifiers, and wavelength division multiplexing and there appears to be few limits to these improvements. For wireless systems, these improvements are primarily driven by the use of better ICs. As long as these improvements in ICs continue to occur, improvements in data rates along with improvements in the use of the frequency spectrum continue to be possible. Improvements in both wireless and wireline systems will also make new forms of Internet content possible. Furthermore, these improvements in ICs along with the improvements in MEMS that are discussed in a related set of slides are gradually making cognitive radio economically feasible. All of these improvements are creating various kinds of entrepreneurial opportunities. These slides are based on a forthcoming book entitled “Technology Change and the Rise of New Industries and they are the sixth session in a course entitled “Analyzing Hi-Tech Opportunities.”
While a majority of the worlds current electricity supply is gener.pdf
While a majority of the world\'s current electricity supply is generated from fossil fuels such as
coal, oil and natural gas, these traditional energy sources face a number of challenges including
rising prices, security concerns over dependence on imports from a limited number of countries
which have significant fossil fuel supplies, and growing environmental concerns over the climate
change risks associated with power generation using fossil fuels. As a result of these and other
challenges facing traditional energy sources, governments, businesses and consumers are
increasingly supporting the development of alternative energy sources and new technologies for
electricity generation. Renewable energy sources such as solar, biomass, geothermal,
hydroelectric and windpower generation have emerged as potential alternatives which address
some of these concerns. As opposed to fossil fuels, which draw on finite resources that may
eventually become too expensive to retrieve, renewable energy sources are generally unlimited
in availability.
Solar power generation has emerged as one of the most rapidly growing renewable sources of
electricity. Solar power generation has several advantages over other forms of electricity
generation:
Reduced Dependence on Fossil Fuels. Solar energy production does not require fossil fuels and
is therefore less dependent on this limited and expensive natural resource. Although there is
variability in the amount and timing of sunlight over the day, season and year, a properly sized
and configured system can be designed to be highly reliable while providing long-term, fixed
price electricity supply.
Environmental Advantages. Solar power production generates electricity with a limited impact
on the environment as compared to other forms of electricity production.
Matching Peak Time Output with Peak Time Demand. Solar energy can effectively supplement
electricity supply from an electricity transmission grid, such as when electricity demand peaks in
the summer
Modularity and Scalability. As the size and generating capacity of a solar system are a function
of the number of solar modules installed, applications of solar technology are readily scalable
and versatile.
Flexible Locations. Solar power production facilities can be installed at the customer site
which reduces required investments in production and transportation infrastructure.
Government Incentives. A growing number of countries have established incentive programs
for the development of solar and other renewable energy sources, such as (i) net metering laws
that allow on-grid end users to sell electricity back to the grid at retail prices, (ii) direct subsidies
to end users to offset costs of photovoltaic equipment and installation charges, (iii) low interest
loans for financing solar power systems and tax incentives; and (iv) government standards that
mandate minimum usage levels of renewable energy sources.
Despite the cost, an advantage of photovoltaic systems is.
WaterSolutionWater.pdf
This very short document contains only one word repeated three times - "Water". It does not provide much context or information to summarize in 3 sentences or less. The document seems to focus on the subject of water but does not elaborate on any key details, topics, or ideas about water that could be condensed into a multi-sentence summary.
More Related Content
Similar to What is broadbandWhat is the potential for broadband wireless syste.pdf
Ch#3.pptx
The document discusses signals carried over telecommunications networks. It covers:
1) Different types of information transmitted including voice, video, text, and files with varying bandwidth and loss tolerance requirements.
2) Analog and digital signals, with digital transmission becoming more common due to advantages like reliability and cost.
3) Pulse code modulation is introduced as the standardized digital encoding method used in telephone networks to convert analog signals to digital for transmission.
Frontiers of Wireless and Mobile Communications
This document discusses emerging wireless technologies and their impact. It provides an overview of key technologies like MIMO, cooperative communications, and dynamic spectrum access. It summarizes the evolution of radio technologies from 2G to 4G standards and increasing link speeds. It also examines short-range wireless technologies and research challenges in building cognitive radios and software-defined radios to efficiently utilize spectrum.
5 g link budget
This document provides an overview of millimeter wave (mmWave) communications for 5G wireless networks, with a focus on propagation models. It discusses key concepts of 5G including the use of mmWave spectrum to provide multi-Gbps data rates. The document compares propagation parameters and channel models from various standardization bodies in the 0.5-100 GHz range. It summarizes recent work on measurements and models of path loss, penetration loss, and more for 5G mmWave channels across different scenarios.
Community owned networks - connectivity solution for Africa
Cellular connectivity has provided impressive Internet growth in Africa over the past decade, but according to the ITU, in 2017, Africa only had 20% of the population using the Internet; a laggard compared to 40% in Asia & the Pacific and the 50% world average. We have connected the easy half of the population and connecting the next half of the world will require new innovative thinking.
This presentation looks at the current challenges to overcome and building blocks that can help community owned networks grow. It studies radio infrastructure, spectrum sharing and localized services all underpinned by the right regulation and skills.
A Review on Cooperative Communication Protocols in Wireless World
Future generations of cellular communications requires higher data rates and a more reliable
transmission link with the growth of multimedia services, while keeping satisfactory quality of service, .
MIMO antenna systems have been considered as an efficient approach to address these demands by
offering significant multiplexing and diversity gains over single antenna systems without increasing
bandwidth and power. Although MIMO systems can unfold their huge benefit in cellular base stations,
but they may face limitations when it comes to their deployment in mobile handsets.
To overcome this drawback, relays (fixed or mobile terminals) can cooperate to improve the overall
system performance in cellular networks. Cooperative communications can efficiently combat the severity
of fading and shadowing through the assistance of relays. It has been found that using relays the capacity
and coverage of cellular networks can be extended without increasing mobile transmit power or
demanding extra bandwidth.
AWMCN-1.pptx
This document provides an introduction to an advanced wireless and mobile computing networks course. It outlines the course objectives which include familiarizing students with state-of-the-art wireless networks, relevant data transmission techniques, radio localization, and cellular communication concepts. It also provides an overview of the course contents, textbook, grading scheme, and expectations. The instructor is identified and contact information is provided.
17._CS-12-Networking-1_Evolution_of_Network_1.docx
The document provides details about a computer networking lesson plan, including the expected learning outcomes, teaching activities, resources, and assessments. The lesson will cover the evolution of networking from ARPANET to the internet, switching techniques like circuit and packet switching, networking terminology such as bandwidth, and transmission media including wired and wireless options. Students will learn about these topics through a presentation, videos, worksheets, quizzes and assignments using provided question banks and resources.
Networking Terminology
This document discusses networking technology and computer networks. It defines key concepts like data communication, transmission modes, communication media, computer network components and services. Data can flow in simplex, half-duplex or full-duplex transmission modes. Communication media includes bounded media like twisted pair cables and coaxial cables, and unbounded media like wireless transmission methods. Computer networks allow interconnected computers to share resources and communicate. Basic network services include file, print, message and application services.
Path-loss prediction of GSM signals in warri
This document provides background information on wireless communication and propagation models. It discusses how wireless communication has evolved from early forms using drums and smoke signals to modern cellular networks. The cellular principle is described, where coverage areas are divided into cells served by low-power transmitters to improve capacity and frequency reuse. Frequency reuse allows the same frequencies to be used in cells spaced apart without interference. The document aims to compare the accuracy of free-space and HATA propagation models in urban, suburban, and rural areas of Warri, Nigeria.
Laser Broadband By Sumita Giri
The document discusses laser broadband technology from NASA. It begins with an introduction to lasers and broadband internet. NASA's role is to demonstrate laser communication relay in space, which could increase data rates 100x over traditional radio frequency. This laser broadband technology is needed to provide high-speed internet access and lower the costs of commercial satellite communication. It works by transmitting laser pulses through fiber optic cables. Future uses include faster wireless communication and mobile data downloads. Some advantages are high speeds up to 20x faster and lower energy use, though a laser modem would need to be synced each time.
Facebook Connectivity Lab
Facebook is working to connect the world through various technologies including drones, satellites, and free space optics. Their goal is to provide affordable basic internet access globally. They are developing solutions tailored to different population densities, such as high altitude drones for medium density areas and satellites for low density areas. Challenges include overcoming the physics of signal loss over distance for aerial platforms and the high costs of satellite deployment.
Ramudoc 140228112714-phpapp01
This document discusses stratellites, which are proposed as an alternative to communication towers and satellites. Stratellites would be large balloons stationed in the stratosphere at an altitude of around 20 km. Each stratellite could provide coverage over an area of 300,000 square miles, replacing the need for hundreds of towers. They have advantages over satellites such as lower latency and lower launch costs. Potential applications include broadband internet access, telecommunications networks, and remote sensing. However, stratellites also face challenges such as weather and technical issues that need to be addressed.
A Master of ScienceProject Report Optical cmms-oaa516
This document is a project report submitted by a student for their Master of Science degree. It investigates advanced methods of multiplexing for future terabit optical communications by comparing and analyzing the tolerance of optical orthogonal frequency-division multiplexing (OFDM) to effects such as dispersion and nonlinearity. The report includes an abstract, table of contents, introduction providing background on optical communications and specifying the project aim and objectives, and chapters on historical background, advanced multiplexing methods with a focus on OFDM, simulating an optical OFDM system using MATLAB, and concluding remarks.
Chapter 1.pptx
- The document discusses key concepts in wireless technologies including wireless transmission fundamentals, global cellular networks, broadband wireless, Bluetooth, and future trends such as WiMAX, Mobile-Fi, ZigBee, and Ultrawideband.
- It covers analog and digital signaling and transmission, channel capacity, advantages and disadvantages of wireless communication, and types of wireless communication systems including Bluetooth applications and usage.
stratellite document
This document discusses stratellites, which are high-altitude airships that can be used for wireless communication networks instead of satellites or cell towers. Stratellites are unmanned balloons filled with helium that hover in the stratosphere at around 20 km altitude using solar-powered propellers. Each stratellite can service an area of 300,000 square miles. They have advantages over satellites such as lower latency, lower launch costs, and the ability to provide high-speed broadband access to remote areas. Some potential applications include providing national wireless broadband networks for voice, video, and internet access.
1) What role does bandwidth play in the successful delivery of the A.pdf
1) What role does bandwidth play in the successful delivery of the Advanced Mobile
Communications and Information System?
2) When does functionality transform the standard BlackBerry device into an Advanced Mobile
Communications and Information System?
3)Describe three telecommunications and network technologies used to connect the BlackBerry
with other devices.
4)At this stage in the process, what actions might Sandra and Josh take to reduce the overall
costs of the Advanced Mobile Communications and Information System?
Solution
1) Bandwidth is directly proprtional to speed of receiving abd sending data. More bandwidth
means quicker data will be able to be sent and received through the network. A sufficient amount
of bandwidth will be required to satisfy both synchronous and asynchronous forms of voice and
text communications. In addition, to be able to provide two-way data communications for
interacting with corporate information systems without interruption of buffering, it will require a
decent amount of bandwidth. Therefore, they will need to have enough bandwidth that will
satisfy all communications and data transfers through the network.
2) A standard Blackberry transforms to an Advanced Mobile Communications and Information
System instantaneously.
3) BlackBerry will include
4) They first need to decide on how much they are willing to spend on the Advanced Mobile
Communications and Information System (AMIS). After that they should discuss what
functionalities they want the AMIS to have that is feasible involving the cost. Accordingly they
should research on best provider of these in least cost..
Physical transmission media Presentation slides
Learn Computer Networking Physical transmission media topic
Presentation slides of Subject Information Technology.
PPT-DC.pptx
This document provides an overview of the ECE5XX course on Principles of Digital Communications Systems. The course aims to provide a comprehensive coverage of digital communication theory and design at a graduate level. The first half will cover theoretical foundations, and the second half will cover advanced techniques. Key topics include optimal receiver design, signaling, multiple access techniques like CDMA and OFDM, and MIMO systems. Students are expected to understand digital communication principles and design optimal receivers. Evaluation will be based on exams, assignments, a project, and a paper presentation.
Presentation1.pptx
This document provides an overview of a talk on future trends in 5G and 6G wireless technology. It discusses the evolution from 1G to 5G mobile networks and the key capabilities of 5G such as speeds up to 1 Gbps. 6G is envisioned to enable holographic communication, be integrated with AI, and support a wide range of new applications through delivering ultra-high reliability and low latency. Critical research areas for 6G include new spectrum bands, advanced physical layer techniques like holographic radio, and achieving the key performance targets needed for services like telepresence.
Telecommunication Systems: How is Technology Change Creating New Opportunitie...
These slides discuss how improvements in the data rates of wireline and wireless systems have and continue to occur. For wireline systems, these improvements are driven by the use of better glass fiber, lasers, amplifiers, and wavelength division multiplexing and there appears to be few limits to these improvements. For wireless systems, these improvements are primarily driven by the use of better ICs. As long as these improvements in ICs continue to occur, improvements in data rates along with improvements in the use of the frequency spectrum continue to be possible. Improvements in both wireless and wireline systems will also make new forms of Internet content possible. Furthermore, these improvements in ICs along with the improvements in MEMS that are discussed in a related set of slides are gradually making cognitive radio economically feasible. All of these improvements are creating various kinds of entrepreneurial opportunities. These slides are based on a forthcoming book entitled “Technology Change and the Rise of New Industries and they are the sixth session in a course entitled “Analyzing Hi-Tech Opportunities.”
Similar to What is broadbandWhat is the potential for broadband wireless syste.pdf (20)
Community owned networks - connectivity solution for Africa
Community owned networks - connectivity solution for Africa
A Review on Cooperative Communication Protocols in Wireless World
A Review on Cooperative Communication Protocols in Wireless World
17._CS-12-Networking-1_Evolution_of_Network_1.docx
17._CS-12-Networking-1_Evolution_of_Network_1.docx
A Master of ScienceProject Report Optical cmms-oaa516
A Master of ScienceProject Report Optical cmms-oaa516
1) What role does bandwidth play in the successful delivery of the A.pdf
1) What role does bandwidth play in the successful delivery of the A.pdf
Telecommunication Systems: How is Technology Change Creating New Opportunitie...
Telecommunication Systems: How is Technology Change Creating New Opportunitie...
More from apleathers
While a majority of the worlds current electricity supply is gener.pdf
While a majority of the world\'s current electricity supply is generated from fossil fuels such as
coal, oil and natural gas, these traditional energy sources face a number of challenges including
rising prices, security concerns over dependence on imports from a limited number of countries
which have significant fossil fuel supplies, and growing environmental concerns over the climate
change risks associated with power generation using fossil fuels. As a result of these and other
challenges facing traditional energy sources, governments, businesses and consumers are
increasingly supporting the development of alternative energy sources and new technologies for
electricity generation. Renewable energy sources such as solar, biomass, geothermal,
hydroelectric and windpower generation have emerged as potential alternatives which address
some of these concerns. As opposed to fossil fuels, which draw on finite resources that may
eventually become too expensive to retrieve, renewable energy sources are generally unlimited
in availability.
Solar power generation has emerged as one of the most rapidly growing renewable sources of
electricity. Solar power generation has several advantages over other forms of electricity
generation:
Reduced Dependence on Fossil Fuels. Solar energy production does not require fossil fuels and
is therefore less dependent on this limited and expensive natural resource. Although there is
variability in the amount and timing of sunlight over the day, season and year, a properly sized
and configured system can be designed to be highly reliable while providing long-term, fixed
price electricity supply.
Environmental Advantages. Solar power production generates electricity with a limited impact
on the environment as compared to other forms of electricity production.
Matching Peak Time Output with Peak Time Demand. Solar energy can effectively supplement
electricity supply from an electricity transmission grid, such as when electricity demand peaks in
the summer
Modularity and Scalability. As the size and generating capacity of a solar system are a function
of the number of solar modules installed, applications of solar technology are readily scalable
and versatile.
Flexible Locations. Solar power production facilities can be installed at the customer site
which reduces required investments in production and transportation infrastructure.
Government Incentives. A growing number of countries have established incentive programs
for the development of solar and other renewable energy sources, such as (i) net metering laws
that allow on-grid end users to sell electricity back to the grid at retail prices, (ii) direct subsidies
to end users to offset costs of photovoltaic equipment and installation charges, (iii) low interest
loans for financing solar power systems and tax incentives; and (iv) government standards that
mandate minimum usage levels of renewable energy sources.
Despite the cost, an advantage of photovoltaic systems is.
WaterSolutionWater.pdf
This very short document contains only one word repeated three times - "Water". It does not provide much context or information to summarize in 3 sentences or less. The document seems to focus on the subject of water but does not elaborate on any key details, topics, or ideas about water that could be condensed into a multi-sentence summary.
Thousands of repeating units called nephrons will form a kidney and .pdf
Thousands of repeating units called nephrons will form a kidney and these organs are useful in
extracting the waste from blood and provides a balance in body fluids and same basic design of
kidneys will be found in all vertebrate kidneys.
It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle
the problem of living in water as their body fluid is of high osmotic concentration. These kidneys
helped them to prevent water from outside to inside and to prevent the solutes leaving the body.
The nephrons in these animals use to absorb the ions across the nephron tubules.
The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of
tubules which was restricted to the trunk region of their body and each tubule was found to be
opened medially into the mesomeral coelom and these will be joined the hypomeral coelom
using a short canal. Later on these tubules curved posteriorly so that they can be united into a
common duct called archinephric duct and it has opened in cloaca.
The bulging of spherical cluster of capillaries in the nephrocoel of each segment was seen, in
later stages the glomerulus, nephrocoel and tubule will joined together to from a functional unit
known as archinephron-this is known as primitive vertebrate kidney.
During the course of evolution the nephrocoel lost its connect with that of hypomeral coelom and
slowly it became specialized as Bowman\'s capsule and like this bowman’s capsule was able to
form a union between glomerulus and renal tubule-it formed a functional unit called nephron.
Malpighian body was formed by the combination of glomerulus and Bowman\'s capsule and in
vertebrates the excretory organs are derived from mesoderm and vertebrates got unique
adaptation by having glomerulus which is water permeable capillaries and its suitability for free
water clearance gave them extra advantage for vertebrates for the evolution radiation in the
physiologically fresh water hostile environment.
Solution
Thousands of repeating units called nephrons will form a kidney and these organs are useful in
extracting the waste from blood and provides a balance in body fluids and same basic design of
kidneys will be found in all vertebrate kidneys.
It is believed that it is the fresh water teleost or bony fish which had the kidneys first as to tackle
the problem of living in water as their body fluid is of high osmotic concentration. These kidneys
helped them to prevent water from outside to inside and to prevent the solutes leaving the body.
The nephrons in these animals use to absorb the ions across the nephron tubules.
The primitive form of vertebrate kidney (archinephros) was known to have a segmental series of
tubules which was restricted to the trunk region of their body and each tubule was found to be
opened medially into the mesomeral coelom and these will be joined the hypomeral coelom
using a short canal. Later on these tubules curved posteriorly so tha.
To understand the complexicities of the issue at hand we must first .pdf
To understand the complexicities of the issue at hand we must first look at what cause inland
seas. According to the geographic descrptions,it was more than likely a result of tectonic plates
shifting during the developement of our current landmass positions. When they shift,the land can
either sinkor have its ocean basins fill with water from flooding.This is called
Transgression.Either case causes a developement of a salty body of water with aquatic animals
trapped inside.Being that is surrounded by a desert-like biome,itis more likely to be the result of
the tectonic plates spreading, causing the land to sink and fill in with salt water.As this occurs,
prey animals will thrive through a lack of predators, such as smaller fish.This enables the fishing
industry to boom as it did. The fishing trade in this area is at risk of falling.when humans alter
systems such as this one,their stabilty declines.For a while this was more than likely a self-
sustaining environment.The implementation of irrigation systemshave first,affected the wildlife
surrounding the inland sea, which was assisting its survival. Every animal plays a role in the
ecosystem.When the industries were built around the body of water, the land ecosystem
suffered.As a result, the fish in the corresponding water will eventually suffer.Being a self-
sustaining system, it will keep water cycling by itself. When the system was built for local
farmers, water supplies were being pulled from the natural made sea and into other locations. this
is normally fine for areas,but in one such as this,without any natural made filtering system, it will
begin losing water. the process will takea while due to the water cycle consistently adding some
back,but will occur. As the water levels decrease,so will the fish.This is the cause of research
number two. With an increasing salinity count,the pHof the water and soil will change as well.
Adding salt to the soil as it is doing through wind patterns, slowly crops, which once thrived in
the surrounding land,will begin todeplete.Not all plants require the same nutrient levels..If the
farmer \'s crops are thriving now, with lower salinity counts and lower pH\'s then the same crops
will not grow as well in higher salt concentrations and higher pH\'values .Another factor
affecting local farmers as well as the fishermen is the pesticides and chemicals.These will not
only affect the water\'s pH ,it will also affect the stability of the water for the fish to live in.As
more chemicals and sewage are added to a body of water , the fish have no choice but to take in
those hazardous wastes. At first, humans will grow sick of ill- prepared fish. Second,the fish will
slowly begin to die off causing the fishermen to lose a source of income. The future of this
environment is devasting. Local animals , which do use the sea as a source of food ,will
inadvertently be affected as well . While these animals may be capable of migrating , they cannot
move far into a desert w.
The P is the present value of the cash flow streamP = 100 (1+10.pdf
The P is the present value of the cash flow stream
P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3
= 207.36
Solution
The P is the present value of the cash flow stream
P = 100 / (1+10%)^1 + 50 / (1+10%)^2 + 100 / (1+10%)^3
= 207.36.
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and
RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure
which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the
glycosidic linkage with the N 1 of the nitrogenous base.
14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the
diphosphopyridine molecules, which having significant function in the cell.
Functions of Mono nucleotides:
Other functions used in molecular research studies like :
Solution
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleotides in case of DNA and
RNA structures respectively. C3\' endo sugar pucker is exclusively seen. D Ribose structure
which varies at C2 deoxy form in DNA, Ribo form in RNA. The C1 of the ribose forms the
glycosidic linkage with the N 1 of the nitrogenous base.
14) MONO NUCLEOTIDES are Adenine, Guanine, Cytosine and Thymidine are linked by the
diphosphopyridine molecules, which having significant function in the cell.
Functions of Mono nucleotides:
Other functions used in molecular research studies like :.
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
Ques-1: Prenatal diagnosis has both positive and potentially negative consequences. While it is
most often used to detect serious problems with the fetus, the technology can also be used
potentially to select embryos based on sex, appearance, Where do you think we should draw the
line in allowing parents to use prenatal diagnosis
Answer:
Genetic testing is performed for prenatal diagnosis to know any chromosomal or genetical -
inherited abnormalities of implanted human embryo. It has positive consequence, as some
couples would like to avoid getting a baby with genetic abnormalities. However, there are
negative consequences such as various \"ethical and moral issues of prenatal diagnosis as
explained below. Therefore, it is crucial to draw a line when conducting prenatal diagnosis
finally a couple musty get legal permissions to undergo prenatal diagnosis.
Screening tests for genetic issues can be performed in the first trimester, second trimester or both
trimesters. Carrier testing is also an option performed prior to or during pregnancy. Carrier
testing provides information as to whether one or both parents are carriers for certain inherited
disorders. The results of these tests are used to determine an appropriate plan of care for the
patient. Genetic testing of the fetus and the parents offers both opportunities and ethical
challenges. As a Registered Nurse, you need to be aware of your own feelings in order to provide
non-biased professional support.
Implications of genetic testing:
Genetic testing is the pre-implantation technology is now currently using in detecting and
screening embryo in order to assess whether the resultant embryos from fertilization are normal
or abnormal genotypically. A registered nurse must advice & support to a couple seeking
guidance about the genetic testing because genetic screening has various ethical and moral
aspects. The major rising ethical challenge is the connection between the pre-selection of
embryos based on meticulous genetic analysis followed by rising discrimination of disabled
people. This ethical problem is associated with selection of future children based on their low
levels of disabilities and abnormalities.
Ethical challenges with preimplantation of genetic testing or diagnosis (PGD):
1. PGD allows embryo selection after pregnancy or even before initiation of pregnancy.
However, this procedure is very controversial and faces a variety of moral ethics that are
completely relies upon moral status of embryo and prenatal diagnosis in selecting progeny
without the use of abortion (medical issue).
2. The major rising ethical challenge is the connection between the pre-selection of embryos
based on meticulous genetic analysis followed by rising discrimination of disabled people, a
psychological moral issue. This ethical problem is associated with selection of future children
based on their low levels of disabilities and abnormalities. A clinic should have license primarily
to perform preimplantatio.
QuestionWhat are the elements of safe drinking water act What ar.pdf
Question:
What are the elements of safe drinking water act? What are the aspect & provision for safe
drinking water act?
Solution
:
This act was passed in 2002. The main elements imposes in the act are providing the permissible
limit of contaminants in drinking water i.e. drinking water standard, establishes the rule for
operators of facilities, for drinking water systems, for laboratories that dealt with the drinking
water parameter testing, training & certification to operators & there are many other elements
that require for safe drinking purpose.
Its main aspect is to ensure the safety of consumers by drinking the potable water (the water
contain the contaminants up to prescribed limit given in the act. By consuming the potable water,
the diseases associated due to drinking of polluted water are minimized.
There are three parameters are described in the act. These are physical parameters, chemical
parameters, & biological parameters. Physical parameter includes suspended solid, turbidity,
dissolved solid, pH, hardness, acidity, alkanity etc. The chemical parameters include BOD,
COD, ThOD, DO, etc. The biological parameter includes E.coli, B.Coli bacteria, pathogenic
bacteria, disease causing bacteria. Amongst, three bacteria, it’s the biological parameters which
are very objectionable. The upper limit of this parameters are prescribed in the act upto which
the water are drinkable.
Note: All pollutant water are contaminants but its not necessary that all contaminant are
pollutant..
Programimport java.util.; import java.io.; class FoodTruck.pdf
Program:
import java.util.*;
import java.io.*;
class FoodTruck
{
String truckName;
double fuelintruck;
int numberofemplyees;
String menuItems[]=new String[5];
public void getData()
{
Scanner s=new Scanner(System.in);
System.out.print(\"Enter TruckName\");
truckName=s.next();
System.out.print(\"Enter Fuel in Tank \");
fuelintruck=s.nextDouble();
System.out.print(\"Enter number of employess in truck\");
numberofemplyees=s.nextInt();
System.out.print(\"Enter Menu Items\");
for(int i=0;i<5;i++)
menuItems[i]=s.next();
}
public void ckeckfuel()
{
if(fuelintruck<2.5)
System.out.println(\"Please refill your truck\");
else
System.out.println(\"Fuel is enough\");
}
public void displayMenu()
{
try
{
FileOutputStream fout=new FileOutputStream(\"Menu.txt\");
for(int i=0;i<5;i++)
{
byte b[]=menuItems[i].getBytes();
fout.write(b);
System.out.println(menuItems[i]);
}
}
catch(IOException e)
{
System.out.println(e.getMessage());
}
}
}
public class MyTruck1
{
public static void main(String ar[])
{
FoodTruck ft=new FoodTruck();
ft.getData();
ft.ckeckfuel();
ft.displayMenu();
}
}
Output:
Enter TruckNameFoodpanda
Enter Fuel in Tank 25.4
Enter number of employess in truck5
Enter Menu Itemssabji dal papad noodels paneer
Fuel is enough
sabji
dal
papad
noodels
paneer
Solution
Program:
import java.util.*;
import java.io.*;
class FoodTruck
{
String truckName;
double fuelintruck;
int numberofemplyees;
String menuItems[]=new String[5];
public void getData()
{
Scanner s=new Scanner(System.in);
System.out.print(\"Enter TruckName\");
truckName=s.next();
System.out.print(\"Enter Fuel in Tank \");
fuelintruck=s.nextDouble();
System.out.print(\"Enter number of employess in truck\");
numberofemplyees=s.nextInt();
System.out.print(\"Enter Menu Items\");
for(int i=0;i<5;i++)
menuItems[i]=s.next();
}
public void ckeckfuel()
{
if(fuelintruck<2.5)
System.out.println(\"Please refill your truck\");
else
System.out.println(\"Fuel is enough\");
}
public void displayMenu()
{
try
{
FileOutputStream fout=new FileOutputStream(\"Menu.txt\");
for(int i=0;i<5;i++)
{
byte b[]=menuItems[i].getBytes();
fout.write(b);
System.out.println(menuItems[i]);
}
}
catch(IOException e)
{
System.out.println(e.getMessage());
}
}
}
public class MyTruck1
{
public static void main(String ar[])
{
FoodTruck ft=new FoodTruck();
ft.getData();
ft.ckeckfuel();
ft.displayMenu();
}
}
Output:
Enter TruckNameFoodpanda
Enter Fuel in Tank 25.4
Enter number of employess in truck5
Enter Menu Itemssabji dal papad noodels paneer
Fuel is enough
sabji
dal
papad
noodels
paneer.
Please follow the data and description Active Directory In gen.pdf
Please follow the data and description :
Active Directory :
In general the Active Directory is abbrevated as AD and is a directory service that Microsoft
developed for Windows domain networks. It is included in most of the available Windows
Server operating systems as a set of processes and services.
Considerations for designing a Active Directory :
Before moving on directly to the planning ang implementation of the Active Directory we just
need to get some major factors and their considerations into account so as to handle them
perfectly. When we are designing the Active Directory network, it is important to use the four
divisions (forests, domains, organizational units, and sites) to their maximum potential. Some of
the important factors/considerations are described below :
a) Active Directory elements :
When designing an Active Directory, we need to be completely clear of what each element or
part actually means and how it fits into the overall design.
b) Active Directory forest :
In general, the forest, in terms of Active Directory, basically means every domain, organizational
unit, and any other object stored within its database. The forest is the absolute top level of the
Active Directory infrastructure. We can have more than one forest in a company, which actually
represent the high level security boundaries, and can therefore improve security between
different business units or companies belonging to a single organization. The point behind the
forest is that we have all our domains and domain tree within the organization itself contained
within it. It is designed so that we can have a transitive links between all of the trees within one
forest.
c) Active Directory tree :
A tree with reference to the Active Directory basically refers to a domain and all of its objects
that merge into a single DNS name.
d) Organizational Units and the Leaf Objects :
In an Active Directory, Organizational Units abbrevated as OUs, which are also called as the
Containers, and the Leaf Objects, which are of non-containing objects such as computer accounts
and user accounts, are directly related. We can access the OUs and other objects through the
Microsoft Management Console (MMC) or through the Users and Computers tool in the
Administrative Tools.
e) Active Directory Sites :
The Sites and Services of the MMC is a utility that a lot of Windows administrators, particularly
in smaller organizations, completely overlook. This part of Active Directory, however, is one of
the most crucial parts to understand and implement correctly. These Sites give us a very unique
and well-designed approach to separate specific locations within the Active Directory. As the
principle of an Active Directory domain is global-meaning that it is meant to be the same
anywhere-it could present a problem for users who move from office to office, or for offices with
network connections that are slow. Active Directory sites allow one to specify the IP address
spaces or subnets used with.
package DataStructures; public class HelloWorld AnyType extends.pdf
package DataStructures;
public class HelloWorld >
{
public HelloWorld( )
{
root = null;
}
public void insert( AnyType x )
{
root = insert( x, root );
}
public void remove( AnyType x )
{
root = remove( x, root );
}
public AnyType findMin( )
{
if( isEmpty( ) )
System.out.println(\"tree is empty\");
return findMin( root ).element;
}
public AnyType findMax( )
{
if( isEmpty( ) )
System.out.println(\"tree is empty\");
return findMax( root ).element;
}
public boolean contains( AnyType x )
{
return contains( x, root );
}
public void makeEmpty( )
{
root = null;
}
public boolean isEmpty( )
{
return root == null;
}
public void printTree( )
{
if( isEmpty( ) )
System.out.println( \"Empty tree\" );
else
printTree( root );
}
private BinaryNode insert( AnyType x, BinaryNode t )
{
if( t == null )
return new BinaryNode( x, null, null );
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
t.left = insert( x, t.left );
else if( compareResult > 0 )
t.right = insert( x, t.right );
else
; // Duplicate; do nothing
return t;
}
private BinaryNode remove( AnyType x, BinaryNode t )
{
if( t == null )
return t; // Item not found; do nothing
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
t.left = remove( x, t.left );
else if( compareResult > 0 )
t.right = remove( x, t.right );
else if( t.left != null && t.right != null ) // Two children
{
t.element = findMin( t.right ).element;
t.right = remove( t.element, t.right );
}
else
t = ( t.left != null ) ? t.left : t.right;
return t;
}
private BinaryNode findMin( BinaryNode t )
{
if( t == null )
return null;
else if( t.left == null )
return t;
return findMin( t.left );
}
private BinaryNode findMax( BinaryNode t )
{
if( t != null )
while( t.right != null )
t = t.right;
return t;
}
private boolean contains( AnyType x, BinaryNode t )
{
if( t == null )
return false;
int compareResult = x.compareTo( t.element );
if( compareResult < 0 )
return contains( x, t.left );
else if( compareResult > 0 )
return contains( x, t.right );
else
return true; // Match
}
private void printTree( BinaryNode t )
{
if( t != null )
{
printTree( t.left );
System.out.println( t.element );
printTree( t.right );
}
}
private int height( BinaryNode t )
{
if( t == null )
return -1;
else
return 1 + Math.max( height( t.left ), height( t.right ) );
}
// Basic node stored in unbalanced binary search trees
private static class BinaryNode
{
// Constructors
BinaryNode( AnyType theElement )
{
this( theElement, null, null );
}
BinaryNode( AnyType theElement, BinaryNode lt, BinaryNode rt )
{
element = theElement;
left = lt;
right = rt;
}
AnyType element; // The data in the node
BinaryNode left; // Left child
BinaryNode right; // Right child
}
/** The tree root. */
private BinaryNode root;
public static void main( String [ ] args )
{
HelloWorld t = new HelloWorld( );
final int NUMS = 4000;
final int GAP = 37;
System.out.println( \"Checking... (no more output means success)\" );
for( int i = GAP; i != 0; i = ( i + GAP ) % NUMS )
t.insert.
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
it always attacks oxygen.the image doesnot work
Solution
it always attacks oxygen.the image doesnot work.
import java.util.Scanner;public class Fraction { instan.pdf
The document defines a Fraction class with methods to represent fractions, multiply fractions, and reduce fractions to their lowest terms. It includes constructors to initialize fractions to default or custom values, getter and setter methods, and a main method that demonstrates creating and manipulating Fraction objects.
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Hi,
Please find the Ansswer below.
//PLAYLIST.h
#include
#include
#include
#include
using namespace std;
class Playlist
{
private:
string uniqueID;
string songName;
string artistName;
int songLength;
public:
Playlist() { uniqueID = \"\", songName = \"\", artistName = \"\", songLength = 0; };
Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength);
void InsertAfter();
void SetNext();
string GetID();
string GetSongName();
string GetArtistName();
int GetSongLength();
string GetNext();
void PrintPlaylistNode();
};
//PLAYLIST.CPP
#include \"Playlist.h\"
Playlist::Playlist(string auniqueId, string asongName, string aArtistName, int aSongLength)
{
uniqueID = auniqueId;
songName = asongName;
artistName = aArtistName;
songLength = aSongLength;
}
string Playlist::GetArtistName()
{
return artistName;
}
string Playlist::GetID()
{
return uniqueID;
}
string Playlist::GetSongName()
{
return songName;
}
int Playlist::GetSongLength()
{
return songLength;
}
void Playlist::SetNext()
{
}
string Playlist::GetNext()
{
return \"\";
}
void Playlist::InsertAfter() {
}
void Playlist::PrintPlaylistNode()
{
cout << \"Unique ID:\" << uniqueID << endl ;
cout << \"Song Name:\" << songName << endl;
cout << \"Artist Name:\" << artistName << endl;
cout << \"Song Length (in seconds):\" << songLength << endl;
}
//PLAYSLITSNODE.h
#pragma once
#include \"Playlist.h\"
#include
class PlaylistNode
{
private:
std::list library;
Playlist get(list _list, int _i);
void PrintPlaylist(Playlist aPlayList);
public:
void Addsong(Playlist aPlayslist);
void Removesong(string aUnwiid);
void Changeposition(int oldPostion, int anewPostion);
void PrintSongByartist(string aAstist);
void PrintSongtotalLen();
void PrintFullPlayList();
};
//PLAYLIST.CPP
#include \"PlaylistNode.h\"
void PlaylistNode::Addsong(Playlist aPlaylist)
{
library.push_back(aPlaylist);
}
void PlaylistNode::Removesong(string aUnwiid)
{
if (library.size > 0)
{
for (it = library.begin(); it != library.end(); ++it)
{
if (it->GetID() == aUnwiid)
{
cout << it->GetSongName() << endl;
library.remove(*it);
break;
}
}
}
}
Playlist PlaylistNode::get(list _list, int _i) {
list::iterator it = _list.begin();
for (int i = 0; i<_i; i++) {
++it;
}
return *it;
}
std::list::iterator it;
void PlaylistNode::PrintFullPlayList()
{
for (it = library.begin(); it != library.end(); ++it)
{
PrintPlaylist(*it);
}
}
void PlaylistNode::PrintSongByartist(string aartiename)
{
for (it = library.begin(); it != library.end(); ++it)
{
if(it->GetArtistName() == aartiename)
PrintPlaylist(*it);
}
}
void PlaylistNode::PrintSongtotalLen()
{
int TotalSonglengst = 0;
for (it = library.begin(); it != library.end(); ++it)
{
TotalSonglengst += it->GetSongLength();
}
cout << \"Total songs Length (in seconds):\" << TotalSonglengst << endl;
}
void PlaylistNode::PrintPlaylist(Playlist aPlayList)
{
cout << \"Unique ID:\" << aPlayList.GetID() << endl;
cout << \"Song Name:\" << aPlayList.GetSongName() << endl;
cout << \"Artist Name:\" << aPlayList.GetArtis.
Family as a Social Institution A family can be defined as group of .pdf
Family as a Social Institution: A family can be defined as group of two or more people living in
a household and connected to each other by blood or adoption or marriage. Family as social
constitution serves to create and maintain the family life in correct ways which are considered
good by a society. It is not an objective institution as it serves to give shape to feeling and
emotions of family memberns in fundamental ways.
Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its
members. These small families are supported by increasingly reducing sized homes and are
easier to relocate. Further, small sized nuclear families can support the expensive education,
medication and other services to their children in a much better way as compared to the large
sized joint families.
Existence and characteristics of family structures: Some of the common family structures with
their characteristic features are as follows:
1: Nuclear family: The family with two generations i.e. parents and their children
2: Extended family: The family with three generations i.e. grandparents, parents and their
children constitutes an extended family.
3: Single parent family: The family in which one parent and children are residing in same
household is called as single parent family.
4: Reconstituted family: The family in which either or both of the parents have children from
their previous marriage living together are called as reconstituted family.
Characters of a family: A family is established by mating relation between man and woman
through marriage institution. Marriage is foundation of family irrespetive of mating relationship
without marriage. A family always resides in a common household wherein each family member
has his own name. Hence, marriage, common household, nomenclature of family members,
mode of interaction and communication and an economic provision are some of the
characteristics of a family.
Solution
Family as a Social Institution: A family can be defined as group of two or more people living in
a household and connected to each other by blood or adoption or marriage. Family as social
constitution serves to create and maintain the family life in correct ways which are considered
good by a society. It is not an objective institution as it serves to give shape to feeling and
emotions of family memberns in fundamental ways.
Predominance of nuclear families: Smaller sized nuclear families indulge individualism in its
members. These small families are supported by increasingly reducing sized homes and are
easier to relocate. Further, small sized nuclear families can support the expensive education,
medication and other services to their children in a much better way as compared to the large
sized joint families.
Existence and characteristics of family structures: Some of the common family structures with
their characteristic features are as follows:
1: Nuclear family: The family with two generations i.e. parents and t.
D. The actual development of new standards and protocols for the Int.pdf
D. The actual development of new standards and protocols for the Internet is carried out by
working groups chartered by the IETF. Answers A, B, and C are incorrect.
Solution
D. The actual development of new standards and protocols for the Internet is carried out by
working groups chartered by the IETF. Answers A, B, and C are incorrect..
Dependent Variable. A variable that depends on one or more other var.pdf
Dependent Variable. A variable that depends on one or more other variables The dependent
variable responds to the independent variable. It is called dependent because it \"depends\" on
the independent variable. So Answer Is D
Solution
Dependent Variable. A variable that depends on one or more other variables The dependent
variable responds to the independent variable. It is called dependent because it \"depends\" on
the independent variable. So Answer Is D.
C is correct. While all Layer 2 devices split collision domains, swi.pdf
C is correct. While all Layer 2 devices split collision domains, switches create a separate
collision domain for each port.
A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision
domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into
two collision domains. D is incorrect.
Solution
C is correct. While all Layer 2 devices split collision domains, switches create a separate
collision domain for each port.
A, B, and D are incorrect. A is incorrect because hubs are Layer 1 devices and extend collision
domains. B is incorrect because a bridge is a Layer 2 device, but can split the network only into
two collision domains. D is incorrect..
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
Answer.
The following organisms are present in pod.
1. Prokaryotes, eg. Bacteria
2. Eukaryotes
a. Algae (plants)
b. Protozoans
3. Protists (unicellular eukaryotes)
Solution
Answer.
The following organisms are present in pod.
1. Prokaryotes, eg. Bacteria
2. Eukaryotes
a. Algae (plants)
b. Protozoans
3. Protists (unicellular eukaryotes).
AnswerThe mobile elements are the elerments move form one place t.pdf
Answer:
The mobile elements are the elerments move form one place to other place, where the particular
element is deficient.
The deficiency of mobile elements first appear in older leave whereas the deficency of the
immobile elements first appear in the younger leaves
The immobile elements are iron, calcium, manganese, zinc, copper and boron
Solution
Answer:
The mobile elements are the elerments move form one place to other place, where the particular
element is deficient.
The deficiency of mobile elements first appear in older leave whereas the deficency of the
immobile elements first appear in the younger leaves
The immobile elements are iron, calcium, manganese, zinc, copper and boron.
More from apleathers (20)
While a majority of the worlds current electricity supply is gener.pdf
While a majority of the worlds current electricity supply is gener.pdf
Thousands of repeating units called nephrons will form a kidney and .pdf
Thousands of repeating units called nephrons will form a kidney and .pdf
To understand the complexicities of the issue at hand we must first .pdf
To understand the complexicities of the issue at hand we must first .pdf
The P is the present value of the cash flow streamP = 100 (1+10.pdf
The P is the present value of the cash flow streamP = 100 (1+10.pdf
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
Ribose sugar puckers adopt for both Deoxy nucleotides and ribonucleo.pdf
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
Ques-1 Prenatal diagnosis has both positive and potentially negativ.pdf
QuestionWhat are the elements of safe drinking water act What ar.pdf
QuestionWhat are the elements of safe drinking water act What ar.pdf
Programimport java.util.; import java.io.; class FoodTruck.pdf
Programimport java.util.; import java.io.; class FoodTruck.pdf
Please follow the data and description Active Directory In gen.pdf
Please follow the data and description Active Directory In gen.pdf
package DataStructures; public class HelloWorld AnyType extends.pdf
package DataStructures; public class HelloWorld AnyType extends.pdf
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
it always attacks oxygen.the image doesnot workSolutionit alwa.pdf
import java.util.Scanner;public class Fraction { instan.pdf
import java.util.Scanner;public class Fraction { instan.pdf
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Hi,Please find the Ansswer below.PLAYLIST.h#include iostrea.pdf
Family as a Social Institution A family can be defined as group of .pdf
Family as a Social Institution A family can be defined as group of .pdf
D. The actual development of new standards and protocols for the Int.pdf
D. The actual development of new standards and protocols for the Int.pdf
Dependent Variable. A variable that depends on one or more other var.pdf
Dependent Variable. A variable that depends on one or more other var.pdf
C is correct. While all Layer 2 devices split collision domains, swi.pdf
C is correct. While all Layer 2 devices split collision domains, swi.pdf
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
Answer.The following organisms are present in pod.1. Prokaryotes.pdf
AnswerThe mobile elements are the elerments move form one place t.pdf
AnswerThe mobile elements are the elerments move form one place t.pdf
Recently uploaded
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdWhat is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Recently uploaded (20)
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
What is broadbandWhat is the potential for broadband wireless syste.pdf
- 1. What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?: no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us Solution What is broadband?What is the potential for broadband wireless systems?Do you think it will ever really catch on here in the US? sol: Broadband is a transmission technique with high capcaticy using wide range of frequency for data transmission and communication.it has an capability of sending multiple singnals through different medium like optical fiber,coaxial fiber. potential for broadband wireless systems: 1)wireless broadband network has potencial of data rates which is equal to wired networks 2)it supports both symmetric (it means same data rates in both the direction)and asymmetric 3)it has also capable of sending high data rates and communicate with satellite systems 4)it has a wide range of signal strength upto 50 km Do you think it will ever really catch on here in the US?:
- 2. no it will catch on here in the us also because as the techology increases the needs also increases so broadband will play a major role in day today life.according to us analysis the wireless broadband subscription is 46.9% of population in 2009 and it has increased to 89.8% of the population in 2012 and coming to the broadband usage it was 2.5% in 2000 and as in 2012 it was 28.0% in the world. so the above analysis is one of the proof for developing of wireless Broadband in us