Webtools RCO40LP Wire Rope Cutters
•
0 likes•256 views
This document provides specifications for the RCO40LP wire rope cutter, including its cutting capacity of steel wire ropes up to 38mm in diameter with a maximum tensile strength of 1960N/mm2. The cutter is suitable for cutting wire ropes, cables, and umbilicals with a stainless steel body and corrosion resistant materials that provide long life. It also has an open design that allows for easy positioning on cables and can be used at any water depth.
Report
Share
Report
Share
Download to read offline
Recommended
Webtools RCO40 Wire Rope Cutters - Data Sheet
This document provides specifications for the RCO40 wire rope cutter. The cutter can cut steel wire ropes up to 38mm in diameter with a maximum tensile strength of 1960N/mm2. It is designed for cutting wire ropes, cables, and umbilicals under heavy working conditions. The cutter has a stainless steel body and alloy steel cylinder that provide corrosion resistance and a long life for the cutting blade and anvil.
Webtools RCO54 Wire Rope Cutters - Data Sheet
The document describes a heavy duty wire rope cutter called the RCO54 that is designed for severe working conditions. It can cut wire ropes up to 54mm in diameter and has a corrosion resistant stainless steel body. The cutter has a long-lasting blade and anvil to minimize maintenance and is suitable for operation in confined spaces. Optional accessories include a hydraulic intensifier panel and handle.
3 deepwater guidewire anchor2
The document describes a deepwater guidewire anchor supplied by IMENCO for subsea applications. The anchor is operated by an ROV, fits standard 8-5/8" guide posts, and can secure guidewires with tensions up to 45 tons. It has a simple, proven design that allows installation and release without special tools. The all-stainless steel anchor is supplied with full documentation and has been used on projects as deep as 2,200 meters.
Fcaw
This document discusses flux-cored arc welding (FCAW), including its classification system, advantages like high deposition rates and deeper penetration compared to shielded metal arc welding, and limitations such as slag removal needs, more smoke and fumes than gas metal arc welding and submerged arc welding, and higher equipment and material costs compared to SMAW. FCAW electrodes are classified based on their minimum ultimate tensile strength and position of use, and the process is governed by AWS specifications on electrode composition and performance.
How to weld fully austenitics
This document provides information on welding fully austenitic stainless steels. It discusses the history, chemical composition, microstructure, properties, welding methods, and considerations for welding 254 SMO and 654 SMO grades. Key points include:
- 254 SMO and 654 SMO were developed in the 1950s-1970s to improve resistance to intermetallic precipitation compared to earlier 6Mo grades.
- Nickel-based fillers such as P12, P12-0Nb, and P16 are recommended to minimize molybdenum segregation.
- Welding methods include MMAW, GMAW, GTAW, SAW, and plasma. Heat input should not exceed
Soldadura de alambre tubular fcaw
This document discusses flux cored arc welding (FCAW), including its two classifications of self-shielded (FCAW-SS) and gas-shielded (FCAW-GS). It outlines the advantages and limitations of each, such as FCAW-SS working in open fields without gas needs but producing smoke and splashes, while FCAW-GS has less portability but better appearance and mechanical properties. The document also covers the main components of welding equipment used for FCAW, electrode classifications, the role of flux, and common applications of FCAW in structures, shipyards, piping, railways and more.
Pao 71690-v1-en
- PAO bushings are oil-impregnated paper condenser bushings that meet ANSI/IEEE standards. They are used in power transformers from 25-765kV.
- The bushings have an oil-impregnated paper core wound around a central conductor tube. Aluminum foils are inserted between the paper layers to achieve optimal electrical gradients.
- PAO bushings are designed for an average lifetime of over 30 years under normal operating conditions. They can be installed at angles up to 45 degrees for voltages up to 138kV and 30 degrees for higher voltages.
Ripley Utility Tool WS 22 - Double End Cable Stripping Tool
This document provides information on electric utility tools for stripping cable insulation, including:
1. The WS 22 Series is an end stripper for 600V cables from 1/0 AWG to 1000 MCM that cleanly strips two specific cable sizes without damaging conductors.
2. The Power Driven End Stripper is designed for use with a power drill to quickly and precisely strip cables from 1/0 AWG to 1000 MCM. It has an adjustable strip stop and guards to ensure safety.
3. The Double-Ended End Stripper is also for stripping cable insulation but the document provides no additional details.
Recommended
Webtools RCO40 Wire Rope Cutters - Data Sheet
This document provides specifications for the RCO40 wire rope cutter. The cutter can cut steel wire ropes up to 38mm in diameter with a maximum tensile strength of 1960N/mm2. It is designed for cutting wire ropes, cables, and umbilicals under heavy working conditions. The cutter has a stainless steel body and alloy steel cylinder that provide corrosion resistance and a long life for the cutting blade and anvil.
Webtools RCO54 Wire Rope Cutters - Data Sheet
The document describes a heavy duty wire rope cutter called the RCO54 that is designed for severe working conditions. It can cut wire ropes up to 54mm in diameter and has a corrosion resistant stainless steel body. The cutter has a long-lasting blade and anvil to minimize maintenance and is suitable for operation in confined spaces. Optional accessories include a hydraulic intensifier panel and handle.
3 deepwater guidewire anchor2
The document describes a deepwater guidewire anchor supplied by IMENCO for subsea applications. The anchor is operated by an ROV, fits standard 8-5/8" guide posts, and can secure guidewires with tensions up to 45 tons. It has a simple, proven design that allows installation and release without special tools. The all-stainless steel anchor is supplied with full documentation and has been used on projects as deep as 2,200 meters.
Fcaw
This document discusses flux-cored arc welding (FCAW), including its classification system, advantages like high deposition rates and deeper penetration compared to shielded metal arc welding, and limitations such as slag removal needs, more smoke and fumes than gas metal arc welding and submerged arc welding, and higher equipment and material costs compared to SMAW. FCAW electrodes are classified based on their minimum ultimate tensile strength and position of use, and the process is governed by AWS specifications on electrode composition and performance.
How to weld fully austenitics
This document provides information on welding fully austenitic stainless steels. It discusses the history, chemical composition, microstructure, properties, welding methods, and considerations for welding 254 SMO and 654 SMO grades. Key points include:
- 254 SMO and 654 SMO were developed in the 1950s-1970s to improve resistance to intermetallic precipitation compared to earlier 6Mo grades.
- Nickel-based fillers such as P12, P12-0Nb, and P16 are recommended to minimize molybdenum segregation.
- Welding methods include MMAW, GMAW, GTAW, SAW, and plasma. Heat input should not exceed
Soldadura de alambre tubular fcaw
This document discusses flux cored arc welding (FCAW), including its two classifications of self-shielded (FCAW-SS) and gas-shielded (FCAW-GS). It outlines the advantages and limitations of each, such as FCAW-SS working in open fields without gas needs but producing smoke and splashes, while FCAW-GS has less portability but better appearance and mechanical properties. The document also covers the main components of welding equipment used for FCAW, electrode classifications, the role of flux, and common applications of FCAW in structures, shipyards, piping, railways and more.
Pao 71690-v1-en
- PAO bushings are oil-impregnated paper condenser bushings that meet ANSI/IEEE standards. They are used in power transformers from 25-765kV.
- The bushings have an oil-impregnated paper core wound around a central conductor tube. Aluminum foils are inserted between the paper layers to achieve optimal electrical gradients.
- PAO bushings are designed for an average lifetime of over 30 years under normal operating conditions. They can be installed at angles up to 45 degrees for voltages up to 138kV and 30 degrees for higher voltages.
Ripley Utility Tool WS 22 - Double End Cable Stripping Tool
This document provides information on electric utility tools for stripping cable insulation, including:
1. The WS 22 Series is an end stripper for 600V cables from 1/0 AWG to 1000 MCM that cleanly strips two specific cable sizes without damaging conductors.
2. The Power Driven End Stripper is designed for use with a power drill to quickly and precisely strip cables from 1/0 AWG to 1000 MCM. It has an adjustable strip stop and guards to ensure safety.
3. The Double-Ended End Stripper is also for stripping cable insulation but the document provides no additional details.
safety while prestressed concrete
Safety is critical during prestressed concrete production to prevent serious injury from failure of steel wires under tension. Operators and others must be excluded from the work area during stressing and protected by guards. Equipment like hydraulic jacks and anchoring systems must be regularly inspected and maintained to prevent wire breakage. Proper cleaning and inspection of wedges and barrels is also needed to ensure the steel wires are securely held during tensioning.
Phoenix Contact's CF3000, automatic stripping and crimping machine
This document summarizes tools from TOOL fox for processing conductors and cables. It describes the AUTOMATIC DEVICES CF 3000, a stripping and crimping device that can process taped ferrules with insulating collars from 22-14 AWG wire sizes. It also allows changing to different cross section ranges within a minute. Reeled ferrules are available in various AWG sizes and colors to work with modular terminal blocks. Crimp sets include assortment boxes for storing ferrules and crimping pliers.
Built-in Novel Insulation Monitoring Function for RIF Paperless Transformer B...
This seminar discusses novel insulation monitoring functions for resin impregnated fiberglass (RIF) paperless transformer bushings. It compares traditional oil, resin, and RIF bushings and highlights advantages of RIF bushings like mechanical strength and maintenance-free operation. New N-RIF bushings add built-in monitoring capabilities by using two capacitors - a main insulation capacitance and larger grading layer capacitance. Connecting monitoring terminals to the grading layer allows online monitoring of insulation conditions without impacting performance or requiring external power. This provides early detection of faults to prevent failures and allows scheduled maintenance.
TIP TIG - USA
This document provides information on TIP TIG welding technology. It describes TIP TIG as a semi-automatic hot wire gas tungsten arc welding process that uses a vibratory wire feeder and applies a hotwire current to the filler metal. The document outlines the benefits of TIP TIG such as higher deposition rates and lower heat input compared to other processes. It also discusses TIP TIG applications in industries such as oil and gas, aerospace, and shipbuilding. Case studies are presented showing how companies like CNOOC have used TIP TIG for challenging welds.
Phoenix Contact's CF500, semi automatic crimping machine
The document discusses automatic crimping tools from TOOL fox Group that provide flexible and quick processing of conductors and cables. The CF 500 is highlighted as an automatic crimping device that has high compression capacity in a compact design and can process a variety of contact types up to 50 mm2. Crimp sets including assortment boxes are also described, which contain ferrules and tools for crimping wires up to 25mm2 from the side or front.
NES-04
This document summarizes information about the Nozzle End Segment (NES-04) including its properties, parts, and challenges faced in machining. It discusses issues like insufficient bolts causing poor roundness in facing lathes and long cycle times for drilling and threading holes. Solutions introduced new carbide and inserted tools that operated at higher speeds, reducing cycle times by 50% and improving finishes and dimensional accuracy.
Webtools WCS54D Wire Rope Cutters up to 54mm - Data Sheet
The document provides information about the WCS54D wire rope cutter, which can cut wire rope up to 54mm in diameter made of 1770N/mm2 grade steel. It is suitable for use at any water depth and also to cut cables and umbilicals. The wire rope cutter weighs approximately 22kg, has a maximum input pressure of 700 bars, and features a corrosion resistant stainless steel construction and manual anvil for diver operation.
Kevlar belt kevlar roller felt belt
Foshan Saihong Felt Co., Ltd. produces three types of felt rollers and conveyor belts using different materials and temperatures to handle varying temperatures in aluminum extrusion processes. The company uses innovative resin treatments to harden the felts while keeping their surfaces soft to better protect aluminum surfaces. Saihong felts are precisely sized for a perfect fit and minimize heat transfer to extend component lifetimes. The document provides details on the properties and applications of PBO, Kevlar, and other felt products for high, medium, and low temperature use.
Nexans Utility Tool Kit Case 82320 - Cable Preparation Tool Kit
The Nexans Utility Tool Kit Case 82320 contains all the necessary tools needed to prepare both bonded and peelable semi-conductive screened cores. The tools have been selected to ensure the preparation of medium voltage power cables can be easily undertaken. Nexans 82320 kit is supplied in a heard wearing, foam filled case, protecting the contents from damage.
Nexans 82320 Utility Tool Kit Case includes the following:
WS64 Adjustable Cable Stripper
QC1 Quick Clamp
WS76 Semi-Con Shaving Tool
SCS Semi-Con Scoring Tool
GBKG05-05 Chamfering Tool
Nexans 82320 Utility Tool Kit Case Features:
Weight of complete kit: 4.8kg
Length: 44cm Height: 31cm Width: 11cm
* The individual tools can be ordered separately.
Ripley Utility Tool cable preparation tools are used to splice and terminate cable for the Power Transmission and Distribution, electrical construction and maintenance industries. All tools are designed and manufactured to meet specific cable application needs, including accurate removal of insulation, semi-conductive sheathing, protective jacketing and other materials to produce consistent, uniform preparation of cable ends for splicing and termination.
Complete Presentation
This document provides information on grooved piping products from Jinan Meide Casting Co. including mechanical fittings and valves, grooved couplings, fittings, and valves. It describes the key components of grooved piping systems - the grooved pipe profile, rubber gasket, coupling housing, and fasteners. Benefits of grooved piping are also listed such as reduced installation time, accommodation of pipe expansion, flexibility for retrofits and repairs, and suitability for hazardous environments. The document also provides contact information for a distributor in Bangalore, India.
AFP-Walther-offshore-subsea-fluid-connector-technologies
Carl Kurt Walther GmbH & Co. KG is a German engineering company founded in 1931 that develops quick disconnect couplings. They offer over 400,000 variations of mono-couplings and multi-couplings in sizes from 1/4" to 1" that are used in industries such as offshore, aerospace, medical, and defense. Their couplings are made from materials like stainless steel, bronze, and duplex steel and can withstand pressures up to 20,000 psi and depths up to 5,000 meters. They also provide workover stab plates with multiple couplings mounted together for offshore use.
Cembre RHU231 Hydraulic Crimp Head - Pressheads
Cembre RHU231 Hydraulic Crimp Head
Cembre RHU231 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU231
Copper Lugs & Splices up to 630sqmm
Aluminium Lugs & Splices up to 500sqmm
Truetzschler Card Clothing (TCC)
Trüetzschler Card Clothing (TCC) is one of the world's leading manufacturers of metallic and flexible wire clothing for cards with over 60 years of experience. TCC provides high quality metallic wires, flat tops, stationary flats, etc.
For more information visit www.ategroup.com
FiloShrink Coldshrink Abandonment kits
The FiloShrink Cold Applied AK-series cable abandonment kits are designed for temporary or permanent abandonment of cables up to 3.3kv. They offer environmental and mechanical protection and do not require a heat source for installation. The kits are suitable for most common cable types like PVC, XLPE, PILC and EPR, and can be used for armored or unarmored, single or multi-core cables. The kits come in a range of sizes to accommodate cable diameters from 10mm to 83mm.
Manufacturing process of porcelain insulators
manufacturing process of different types of insulators and their uses.It gives just a overview of a process.
Halogen-Free Junction Boxes & Enclosures IP65, 1.5-240sqmm
This document provides information on Abox Ex Rated Junction Boxes made of polycarbonate that are authorized for use in explosion-endangered areas zones 2 and 22. The junction boxes are available in various sizes from 80x80x52mm to 250x250x115mm with 5-pole terminals. They provide protection up to IP65, are UV and weather resistant, and can operate in temperatures from -35°C to +40°C. The document also lists compatible cable glands for the junction boxes in sizes from M12 to M50 that provide sealing and strain relief.
Stripping Tool for Bonded Semi-Con Screens
The document describes shaver tools for removing the bonded semi-conductive layer from medium and high voltage XPLE insulated cables with diameters between 10-52mm. The tools have adjustable cutting blades that compensate for oval cables and stop at a selected point. They can start shaving directly from the cable end or at intermediate points and produce a smooth finish.
Ellis Ellis Patents Centaur Cable Saddles - Ellis Patents Electrical Product ...
Ellis Ellis Patents Centaur Cable Saddles - Ellis Patents Electrical Product ...Thorne & Derrick International
Centaur cable saddles are designed to support insulated HV cables used in power transmission systems from 275kV to 400kV. The saddles accommodate cable diameters from 100mm to 162mm and support spacing of up to 8.4m. Made of extruded aluminum, the saddles incorporate a hinged overstrap with a polymeric liner to cushion cables during short-circuits up to 64kA RMS for 1 second or 163kA peak. The saddles are available in various lengths and mounting configurations to support different cable sizes and spacing.Ultrasonic welding
One of the welding processes that used in Engineering field is the ultrasonic welding.
Thanks for the colleagues who give this slides to publish.
FDI Product Range Brochure 14-15
This document provides a catalogue of products for sale and hire for formwork applications. It lists various formwork accessories including tie rods, nuts, plates, anchors, spacers and cones. Product information includes item descriptions, sizes, weights, load ratings and pack quantities. The catalogue also includes sections on reinforcement accessories such as tying wire and tools.
Knipex Insulated Pliers & Tools - Main Catalogue
This document provides an overview of KNIPEX pliers and tools. It begins with contact information and includes sections about KNIPEX's history and family ownership over 130 years. The document discusses key innovations like the Alligator and Cobra pliers. It also outlines KNIPEX's manufacturing process, from steel production to precision testing. KNIPEX prides itself on making all products in Germany and investing in employees. The company focuses on sustainability, social responsibility, and maintaining local and global partnerships.
Prysmian Bicon 376AC02 25-27mm Cable Clamp - Prysmian Bicon Trefoil Cable Cleats
Prysmian Bicon 376AC02 25-27mm Cable Clamp - Prysmian Bicon Trefoil Cable CleatsThorne & Derrick International
The document provides information about the Libra Cleat 376AC series, an aluminum cleat suitable for single core cables laid in trefoil configuration. It lists features such as suitable cable diameters ranging from 24-76mm, operating temperatures from -60°C to +100°C, and compatibility with various cable routes and industrial conditions. Tables provide technical data on cleat details, dimensions, weights for different models identified by design numbers.More Related Content
What's hot
safety while prestressed concrete
Safety is critical during prestressed concrete production to prevent serious injury from failure of steel wires under tension. Operators and others must be excluded from the work area during stressing and protected by guards. Equipment like hydraulic jacks and anchoring systems must be regularly inspected and maintained to prevent wire breakage. Proper cleaning and inspection of wedges and barrels is also needed to ensure the steel wires are securely held during tensioning.
Phoenix Contact's CF3000, automatic stripping and crimping machine
This document summarizes tools from TOOL fox for processing conductors and cables. It describes the AUTOMATIC DEVICES CF 3000, a stripping and crimping device that can process taped ferrules with insulating collars from 22-14 AWG wire sizes. It also allows changing to different cross section ranges within a minute. Reeled ferrules are available in various AWG sizes and colors to work with modular terminal blocks. Crimp sets include assortment boxes for storing ferrules and crimping pliers.
Built-in Novel Insulation Monitoring Function for RIF Paperless Transformer B...
This seminar discusses novel insulation monitoring functions for resin impregnated fiberglass (RIF) paperless transformer bushings. It compares traditional oil, resin, and RIF bushings and highlights advantages of RIF bushings like mechanical strength and maintenance-free operation. New N-RIF bushings add built-in monitoring capabilities by using two capacitors - a main insulation capacitance and larger grading layer capacitance. Connecting monitoring terminals to the grading layer allows online monitoring of insulation conditions without impacting performance or requiring external power. This provides early detection of faults to prevent failures and allows scheduled maintenance.
TIP TIG - USA
This document provides information on TIP TIG welding technology. It describes TIP TIG as a semi-automatic hot wire gas tungsten arc welding process that uses a vibratory wire feeder and applies a hotwire current to the filler metal. The document outlines the benefits of TIP TIG such as higher deposition rates and lower heat input compared to other processes. It also discusses TIP TIG applications in industries such as oil and gas, aerospace, and shipbuilding. Case studies are presented showing how companies like CNOOC have used TIP TIG for challenging welds.
Phoenix Contact's CF500, semi automatic crimping machine
The document discusses automatic crimping tools from TOOL fox Group that provide flexible and quick processing of conductors and cables. The CF 500 is highlighted as an automatic crimping device that has high compression capacity in a compact design and can process a variety of contact types up to 50 mm2. Crimp sets including assortment boxes are also described, which contain ferrules and tools for crimping wires up to 25mm2 from the side or front.
NES-04
This document summarizes information about the Nozzle End Segment (NES-04) including its properties, parts, and challenges faced in machining. It discusses issues like insufficient bolts causing poor roundness in facing lathes and long cycle times for drilling and threading holes. Solutions introduced new carbide and inserted tools that operated at higher speeds, reducing cycle times by 50% and improving finishes and dimensional accuracy.
Webtools WCS54D Wire Rope Cutters up to 54mm - Data Sheet
The document provides information about the WCS54D wire rope cutter, which can cut wire rope up to 54mm in diameter made of 1770N/mm2 grade steel. It is suitable for use at any water depth and also to cut cables and umbilicals. The wire rope cutter weighs approximately 22kg, has a maximum input pressure of 700 bars, and features a corrosion resistant stainless steel construction and manual anvil for diver operation.
Kevlar belt kevlar roller felt belt
Foshan Saihong Felt Co., Ltd. produces three types of felt rollers and conveyor belts using different materials and temperatures to handle varying temperatures in aluminum extrusion processes. The company uses innovative resin treatments to harden the felts while keeping their surfaces soft to better protect aluminum surfaces. Saihong felts are precisely sized for a perfect fit and minimize heat transfer to extend component lifetimes. The document provides details on the properties and applications of PBO, Kevlar, and other felt products for high, medium, and low temperature use.
Nexans Utility Tool Kit Case 82320 - Cable Preparation Tool Kit
The Nexans Utility Tool Kit Case 82320 contains all the necessary tools needed to prepare both bonded and peelable semi-conductive screened cores. The tools have been selected to ensure the preparation of medium voltage power cables can be easily undertaken. Nexans 82320 kit is supplied in a heard wearing, foam filled case, protecting the contents from damage.
Nexans 82320 Utility Tool Kit Case includes the following:
WS64 Adjustable Cable Stripper
QC1 Quick Clamp
WS76 Semi-Con Shaving Tool
SCS Semi-Con Scoring Tool
GBKG05-05 Chamfering Tool
Nexans 82320 Utility Tool Kit Case Features:
Weight of complete kit: 4.8kg
Length: 44cm Height: 31cm Width: 11cm
* The individual tools can be ordered separately.
Ripley Utility Tool cable preparation tools are used to splice and terminate cable for the Power Transmission and Distribution, electrical construction and maintenance industries. All tools are designed and manufactured to meet specific cable application needs, including accurate removal of insulation, semi-conductive sheathing, protective jacketing and other materials to produce consistent, uniform preparation of cable ends for splicing and termination.
Complete Presentation
This document provides information on grooved piping products from Jinan Meide Casting Co. including mechanical fittings and valves, grooved couplings, fittings, and valves. It describes the key components of grooved piping systems - the grooved pipe profile, rubber gasket, coupling housing, and fasteners. Benefits of grooved piping are also listed such as reduced installation time, accommodation of pipe expansion, flexibility for retrofits and repairs, and suitability for hazardous environments. The document also provides contact information for a distributor in Bangalore, India.
AFP-Walther-offshore-subsea-fluid-connector-technologies
Carl Kurt Walther GmbH & Co. KG is a German engineering company founded in 1931 that develops quick disconnect couplings. They offer over 400,000 variations of mono-couplings and multi-couplings in sizes from 1/4" to 1" that are used in industries such as offshore, aerospace, medical, and defense. Their couplings are made from materials like stainless steel, bronze, and duplex steel and can withstand pressures up to 20,000 psi and depths up to 5,000 meters. They also provide workover stab plates with multiple couplings mounted together for offshore use.
Cembre RHU231 Hydraulic Crimp Head - Pressheads
Cembre RHU231 Hydraulic Crimp Head
Cembre RHU231 crimp head (hydraulic type) featuring a quick automatic coupler for connection to a hydraulic pump with a working pressure of 700bar maximum.
Cembre Crimping Head RHU231
Copper Lugs & Splices up to 630sqmm
Aluminium Lugs & Splices up to 500sqmm
Truetzschler Card Clothing (TCC)
Trüetzschler Card Clothing (TCC) is one of the world's leading manufacturers of metallic and flexible wire clothing for cards with over 60 years of experience. TCC provides high quality metallic wires, flat tops, stationary flats, etc.
For more information visit www.ategroup.com
FiloShrink Coldshrink Abandonment kits
The FiloShrink Cold Applied AK-series cable abandonment kits are designed for temporary or permanent abandonment of cables up to 3.3kv. They offer environmental and mechanical protection and do not require a heat source for installation. The kits are suitable for most common cable types like PVC, XLPE, PILC and EPR, and can be used for armored or unarmored, single or multi-core cables. The kits come in a range of sizes to accommodate cable diameters from 10mm to 83mm.
Manufacturing process of porcelain insulators
manufacturing process of different types of insulators and their uses.It gives just a overview of a process.
Halogen-Free Junction Boxes & Enclosures IP65, 1.5-240sqmm
This document provides information on Abox Ex Rated Junction Boxes made of polycarbonate that are authorized for use in explosion-endangered areas zones 2 and 22. The junction boxes are available in various sizes from 80x80x52mm to 250x250x115mm with 5-pole terminals. They provide protection up to IP65, are UV and weather resistant, and can operate in temperatures from -35°C to +40°C. The document also lists compatible cable glands for the junction boxes in sizes from M12 to M50 that provide sealing and strain relief.
Stripping Tool for Bonded Semi-Con Screens
The document describes shaver tools for removing the bonded semi-conductive layer from medium and high voltage XPLE insulated cables with diameters between 10-52mm. The tools have adjustable cutting blades that compensate for oval cables and stop at a selected point. They can start shaving directly from the cable end or at intermediate points and produce a smooth finish.
Ellis Ellis Patents Centaur Cable Saddles - Ellis Patents Electrical Product ...
Ellis Ellis Patents Centaur Cable Saddles - Ellis Patents Electrical Product ...Thorne & Derrick International
Centaur cable saddles are designed to support insulated HV cables used in power transmission systems from 275kV to 400kV. The saddles accommodate cable diameters from 100mm to 162mm and support spacing of up to 8.4m. Made of extruded aluminum, the saddles incorporate a hinged overstrap with a polymeric liner to cushion cables during short-circuits up to 64kA RMS for 1 second or 163kA peak. The saddles are available in various lengths and mounting configurations to support different cable sizes and spacing.Ultrasonic welding
One of the welding processes that used in Engineering field is the ultrasonic welding.
Thanks for the colleagues who give this slides to publish.
FDI Product Range Brochure 14-15
This document provides a catalogue of products for sale and hire for formwork applications. It lists various formwork accessories including tie rods, nuts, plates, anchors, spacers and cones. Product information includes item descriptions, sizes, weights, load ratings and pack quantities. The catalogue also includes sections on reinforcement accessories such as tying wire and tools.
What's hot (20)
Phoenix Contact's CF3000, automatic stripping and crimping machine
Phoenix Contact's CF3000, automatic stripping and crimping machine
Built-in Novel Insulation Monitoring Function for RIF Paperless Transformer B...
Built-in Novel Insulation Monitoring Function for RIF Paperless Transformer B...
Phoenix Contact's CF500, semi automatic crimping machine
Phoenix Contact's CF500, semi automatic crimping machine
Webtools WCS54D Wire Rope Cutters up to 54mm - Data Sheet
Webtools WCS54D Wire Rope Cutters up to 54mm - Data Sheet
Nexans Utility Tool Kit Case 82320 - Cable Preparation Tool Kit
Nexans Utility Tool Kit Case 82320 - Cable Preparation Tool Kit
AFP-Walther-offshore-subsea-fluid-connector-technologies
AFP-Walther-offshore-subsea-fluid-connector-technologies
Halogen-Free Junction Boxes & Enclosures IP65, 1.5-240sqmm
Halogen-Free Junction Boxes & Enclosures IP65, 1.5-240sqmm
Ellis Ellis Patents Centaur Cable Saddles - Ellis Patents Electrical Product ...
Ellis Ellis Patents Centaur Cable Saddles - Ellis Patents Electrical Product ...
Viewers also liked
Knipex Insulated Pliers & Tools - Main Catalogue
This document provides an overview of KNIPEX pliers and tools. It begins with contact information and includes sections about KNIPEX's history and family ownership over 130 years. The document discusses key innovations like the Alligator and Cobra pliers. It also outlines KNIPEX's manufacturing process, from steel production to precision testing. KNIPEX prides itself on making all products in Germany and investing in employees. The company focuses on sustainability, social responsibility, and maintaining local and global partnerships.
Prysmian Bicon 376AC02 25-27mm Cable Clamp - Prysmian Bicon Trefoil Cable Cleats
Prysmian Bicon 376AC02 25-27mm Cable Clamp - Prysmian Bicon Trefoil Cable CleatsThorne & Derrick International
The document provides information about the Libra Cleat 376AC series, an aluminum cleat suitable for single core cables laid in trefoil configuration. It lists features such as suitable cable diameters ranging from 24-76mm, operating temperatures from -60°C to +100°C, and compatibility with various cable routes and industrial conditions. Tables provide technical data on cleat details, dimensions, weights for different models identified by design numbers.Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
This document provides information about the HCV270 cable, umbilical, and riser cutter. The cutter can cut items up to 270mm in diameter, can be used at any water depth, and is suitable for cutting cables, hydraulic lines, risers, and umbilicals. It has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The cutter weighs approximately 352kg and has a robust, corrosion-resistant steel construction.
Prysmian Bicon 376AC06 32-34mm Cable Clamp - Prysmian Bicon Trefoil Cable Cleats
Prysmian Bicon 376AC06 32-34mm Cable Clamp - Prysmian Bicon Trefoil Cable CleatsThorne & Derrick International
The document provides information about the Libra Cleat 376AC series, an aluminum cleat suitable for single core cables laid in trefoil configuration. It lists features such as suitable cable diameters ranging from 24-76mm, operating temperatures from -60°C to +100°C, and specifications for different cleat sizes including dimensions, weights, and part numbers. Technical data is provided on cable and cleat selection.Ellis Patents Vulcan Stainless Steel Cable Cleats
The document provides information on Vulcan + cable cleats, including:
- They come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- They have a compact, patented design for easy installation in limited spaces and are made of stainless steel for durability.
- Technical specifications, test results, and approvals are provided to demonstrate the cable cleats' performance.
Alroc Insulation Chamfering Tools-8YR0-NO4 (LHC4)
The document provides information about ALROC insulation chamfering tools models LHC2 through LHC5. It lists the insulation diameter ranges for each tool model, along with the corresponding reference code and weight. The tools are used to perform straight or tapered cuts on the insulation of cable extremities and are delivered in wooden boxes.
Ellis Patents 1F-11 One Hole Cable Clamp 13-16mm
This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It lists 17 part numbers with corresponding cable diameter ranges, dimensions, weights, and fixings. Test results are also provided, showing the cable clamps pass impact resistance, temperature, flame, and load tests as specified in BS EN 50368:2003 standards.
Ellis Patents 1F-17 Cable Clamp (One Hole) 38-46mm
This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It lists 17 part numbers with corresponding cable diameter ranges and dimensions. Test results are also included, showing the clamps pass impact resistance, temperature, flame, and load tests as specified in BS EN 50368:2003 standards.
Ecom Serenity SPC Ex Hazardous Area ATEX Headset Datasheet
The document discusses a headset called the Serenity SPC Ex that is designed for hazardous work environments. It has noise cancelling microphones and high noise attenuation ear shells to protect hearing. The headset connects to Ex-Handy mobile phones and allows for hands-free calling in loud areas while keeping workers' hands free. It is certified for use in explosive environments and tested to stringent safety standards.
SebKMT Cable Sheath testers & Fault Locators
Thorne & Derrick UK are official distributors of the SebaKMT range of LV-HV Cable Fault Location instruments including cable sheath testers and cable sheath fault prelocation and pinpointing units. SebaKMT are the leading manufacturer of measurement equipment for the diagnosis of cable networks and for cable fault location. Cable faults are the ''natural enemy'' of reliability. The innovative SebaKMT products make it possible to quickly localise low and high voltage cable faults without causing damage to fault-free parts of the cable.
Ellis Patents COL105-126 Colossus Cable Cleats - Trefoil Cable Cleats
This document provides specifications for Colossus Cable Cleats. It lists various models of Colossus Cleats with their dimensions, weight, and fixing holes. It also lists models of Saddled Colossus Cleats. The document details that Colossus Cleats have been tested according to IEC standard 61914:2009 and lists the test results, including withstanding over 14,000 newtons of force and passing impact resistance and electromechanical force tests. It provides contact information for the manufacturer.
Abtech 4TJB Hazardous Area (ATEX & IECEx) Electrical Enclosure Data
The 4TJB Range is a high voltage enclosure that offers flexibility in cable entry and termination options. It can accept three phase connections in a straight through or bottom entry configuration. The unit accommodates one connector per phase for incoming and outgoing cables. It is rated for use in Zone 1 hazardous areas up to 45kV and has a deluge-tested enclosure made of 316L stainless steel. Dimensions and other specifications vary depending on the configuration.
Ellis Patents VRT+12 Vulcan Stainless Steel Cable Cleats
The document provides information on Vulcan + cable cleats, including:
- They come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- They have a compact, patented design for easy installation in limited spaces and are made of stainless steel for durability.
- Technical specifications, test results, and approvals are provided to demonstrate the cable cleats' performance.
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
Ellis Patents 1F-19 Cable Clamp (One Hole) 51-57mm
This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It lists 17 part numbers with corresponding cable diameter ranges, dimensions, weights, and fixings. Test results are also provided, showing the cable clamps pass impact resistance, temperature, flame, and load tests as specified in BS EN 50368:2003 standards.
Ellis Patents 2F-131 Cable Clamp (Two Hole) 90-97mm
Ellis Patents 2F-131 Cable Clamp (Two Hole) 90-97mm
Ellis Patents 2G-142N 108-114mm Cable Clamp - Ellis Patents Aluminium Two Hol...
Ellis Patents 2G-142N 108-114mm Cable Clamp - Ellis Patents Aluminium Two Hol...Thorne & Derrick International
Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table with 10 different cleat models ranging from supporting cables up to 51mm to over 108mm in diameter. It also details testing information showing the cleats pass the requirements for impact resistance, resistance to electromechanical force, temperature range of -40 to 150 degrees C, and lateral and axial load tests according to European standard BS EN 50368:2003.SPS Heat Shrink Tube - Thick Wall
The document contains specifications for two product lines - TMI shrink tubing and TMC thick wall shrink tubing. It lists various part numbers for each product line along with the corresponding shrink range and wall thickness. It also provides standard lengths available, as well as performance properties for tensile strength, elongation, operating temperature range, shrink temperature and other characteristics. Contact information is given at the bottom for Thorne & Derrick UK.
Ellis Patents ALP-12-ANO Alpha Cable Cleats -Trefoil Cleats 54.6-59.0mm
Ellis Patents ALP-12-ANO Alpha Cable Cleats -Trefoil Cleats 54.6-59.0mmThorne & Derrick International
This document provides specifications for Alpha trefoil cable cleats used for moderate to low levels of short circuit withstand. It lists 15 models of extruded aluminum cleats designated ALP-01 through ALP-15 with dimensions for minimum diameter, maximum diameter, width, height, depth, fixing hole, and weight. It also provides test data showing the cleats meet the requirements for cable cleats in IEC standard 61914:2009, including withstanding over 120kA of short circuits and 96kA of single short circuits. The cleats are for applications from -40 to 150°C and have a very heavy impact resistance classification.Ellis Patents 1F-18 Cable Clamp (One Hole) 46-51mm
This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It includes a selection table listing 17 part numbers with corresponding cable diameter ranges, dimensions, weights, and other specifications. Test results are also presented, showing the cable clamps pass requirements for impact resistance, resistance to electro-mechanical force, temperature resistance, and other standards.
Viewers also liked (20)
Prysmian Bicon 376AC02 25-27mm Cable Clamp - Prysmian Bicon Trefoil Cable Cleats
Prysmian Bicon 376AC02 25-27mm Cable Clamp - Prysmian Bicon Trefoil Cable Cleats
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
Prysmian Bicon 376AC06 32-34mm Cable Clamp - Prysmian Bicon Trefoil Cable Cleats
Prysmian Bicon 376AC06 32-34mm Cable Clamp - Prysmian Bicon Trefoil Cable Cleats
Ellis Patents 1F-17 Cable Clamp (One Hole) 38-46mm
Ellis Patents 1F-17 Cable Clamp (One Hole) 38-46mm
Ecom Serenity SPC Ex Hazardous Area ATEX Headset Datasheet
Ecom Serenity SPC Ex Hazardous Area ATEX Headset Datasheet
Ellis Patents COL105-126 Colossus Cable Cleats - Trefoil Cable Cleats
Ellis Patents COL105-126 Colossus Cable Cleats - Trefoil Cable Cleats
Abtech 4TJB Hazardous Area (ATEX & IECEx) Electrical Enclosure Data
Abtech 4TJB Hazardous Area (ATEX & IECEx) Electrical Enclosure Data
Ellis Patents VRT+12 Vulcan Stainless Steel Cable Cleats
Ellis Patents VRT+12 Vulcan Stainless Steel Cable Cleats
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Ellis Patents 1F-19 Cable Clamp (One Hole) 51-57mm
Ellis Patents 1F-19 Cable Clamp (One Hole) 51-57mm
Ellis Patents 2F-131 Cable Clamp (Two Hole) 90-97mm
Ellis Patents 2F-131 Cable Clamp (Two Hole) 90-97mm
Ellis Patents 2G-142N 108-114mm Cable Clamp - Ellis Patents Aluminium Two Hol...
Ellis Patents 2G-142N 108-114mm Cable Clamp - Ellis Patents Aluminium Two Hol...
Ellis Patents ALP-12-ANO Alpha Cable Cleats -Trefoil Cleats 54.6-59.0mm
Ellis Patents ALP-12-ANO Alpha Cable Cleats -Trefoil Cleats 54.6-59.0mm
Ellis Patents 1F-18 Cable Clamp (One Hole) 46-51mm
Ellis Patents 1F-18 Cable Clamp (One Hole) 46-51mm
Similar to Webtools RCO40LP Wire Rope Cutters
Webtools WCOS38DLP (open sided) Wire Rope Cutters up to 38mm - Data Sheet
Webtools WCOS38DLP (open sided) Wire Rope Cutters up to 38mm - Data SheetThorne & Derrick International
The WCS38DLP is a heavy duty wire rope cutter designed to cut wire ropes up to 38mm in diameter in severe conditions. It can cut at any depth, has a maximum pressure of 220 bar, weighs 16.4kg, and features a closed jaw and removable anvil pin for positioning. It is made of corrosion resistant stainless steel for long life and minimal maintenance.Rebar processing equipment
Growth in industrial technology is increasing demand for new equipment like rebar processing machines. The document discusses various types of equipment used for cutting, bending, and tying rebar, including electric cutters that can cut rebar up to 16mm, heavy duty cutters that can cut rebar up to 42mm, wire rope cutters that can cut steel rope from 1.5mm to 20mm, and automatic bending machines that can bend rebar up to 32mm. It also discusses manual and automatic rebar tying machines. The equipment allows for high production volumes in minimal time with minimal waste and flexibility.
ASC Line Card PDF
This document provides information on various industrial materials and products offered by Associated Steel, including:
1. High strength alloy steels in various forms like rounds, flats, and threaded bar with mechanical properties like hardness of 269-341BHN and tensile strength of 156,000 PSI.
2. Stainless steel options for maintenance applications like austenitic stainless CENCOR and duplex stainless ASC2250 with corrosion resistance.
3. Wear resistant plates and strips with hardness over 400BHN for applications like chutes and conveyors as well as abrasion resistant wear pipe that is induction hardened.
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
This document provides information about the RCV135 wire rope cutter. It can cut wire ropes up to 135mm in diameter made of 1770N/mm2 grade steel. It is suitable for underwater use at any depth and can cut wire ropes, cables, and umbilicals. The cutter has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. It weighs approximately 176kg and is made of robust plated steel and stainless steel to resist corrosion. Custom designs are available upon request.Wire Rope
Swaging is a method of securing wire rope with fittings like aluminum sleeves and stainless steel tension swage studs. The connection will exceed the rated breaking strength of the wire rope or cable when properly applied. Therefore,swaging is widely used to accomplish tasks of light-duty projects and industrial applications. The proper swaging connections require quality sleeve,corresponding wire rope, and correct swaging tool. IWISS with its sub-brand iCrimp offers a series of swaging tools for virtually any type of swaging connections, from wire rope cutter, manual swager, bench mounted swager, to pneumatic swaging machine. The tools offer all key features of modern tools, such as:
1. Made of premium steel, the tools are high strength durable for long service life. With special surface treatment, the tools achieve a high degree of water proof, and corrosion-resistant
2. Accurate hole design and well-polished jaws makes every connection perfect with virtually all sleeve and wire rope in the market
3. Adjustable function makes tight and trust- worth connection even after a long time using.
4. Ergonomic handle ensures optimal force-transmission and anti-fatigue operation.
IWISS tools are designed to make connections much easier. We insist on innovation and released new style swaging tools in the past years. We don’t follow the trend, but we lead it.
Brochure Norton Clipper CDM handheld drilling motors
The document discusses two handheld drilling motors, the CDM163 and CDM203. It summarizes their key features, which include durability, reliability, ergonomics, and a 2-year warranty. Their technical specifications are also provided, such as power output, RPM ranges, maximum drilling diameters, and weight. The document also introduces some associated drilling accessories like core bits and drilling stands.
Broschyr Norton Clipper CDM borrmotorer
I Norton Clippers CDM-sortiment ingår två modeller: CDM163 som har en motoreffekt på 1.800 W och är avsedd för våtborrning med borrkronor med en diameter på upp till 160 mm, och CDM203 med en motor på 2.000 W som kan användas för både torr- och våtborrning med borrkronor upp till 200 mm diameter. Den senare är särskilt lämplig för håltagning i armerad betong.
Wire Cutting & Stripping
Among a series of coordinated operations involved in making an electrical connection, cable cutting, and stripping are the initial and important preparation steps.
Proper preparation ensures high-quality connections. Our tools are in your good hands.
The first step, cutting. The cable must be cut cleanly, straightly without great effort. IWISS with its sub-brand iCrimp offers a variety of cutters to cover a range from thin fine-wire conductor to large diameter power supply cables. The cutters achieve the basic requirements of a quality cutting tool, for example:
*Made of premium steel, cutting edges stay sharp with no fraying.
*Ergonomic handle design brings a comfortable operation
*Ratcheting mechanism makes large size cable cutting effortless
The second step, stripping, the proper removal of the sheath brings high quality conductive connections. The cable must be stripped to the proper length without damages. Stripping can be super easy and fast when you get a suitable stripper. Our tools are designed to make it easy to get quick and clean stripping for cables of different sizes and materials. There is two basic strippers for your choice:
1. Stripping pliers with multiple stripping holes. Sharp blades and precise design in diameter provide a clean strip without damage to the conductor.
2. Self-adjusting insulation strippers are ideal for cable in different materials. The stripping depth can be adjusted according to cable diameter, and sheath thickness. It reduces the risk of damage to the conductor.
Besides, we manufactured various versatile strippers to help people to get more work done at less cost.
Grounding sytem components
This document provides information on components for grounding systems, including ground rods, couplers, conductors, and accessories. It describes the physical characteristics and size requirements for different types of ground rods and conductors. It also provides part numbers, specifications, and packaging information for a variety of grounding system components like copper-bonded ground rods, compression and threaded couplers, driving sleeves, and theft deterrent composite cables.
Webtools RCV115 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV115 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
The document describes a heavy duty wire rope cutter called the RCV115 that is designed for use in severe working conditions underwater. It can cut wire rope up to 115mm in diameter and is suitable for cutting various cables and umbilicals. The cutter uses hydraulics to operate the anvil and can cut ropes at any water depth, with customized designs available upon request.Webtools RCV155 Wire Rope Cutters Electroless Nickel Plated Steel Construction
Webtools RCV155 Wire Rope Cutters Electroless Nickel Plated Steel ConstructionThorne & Derrick International
This document describes a heavy duty wire rope cutter called the RCV155 that is designed to cut wire ropes and cables underwater. It can cut ropes up to 155mm in diameter and operates using hydraulic pressure of up to 690 bars for the main cylinder and 210 bars for the anvil. The cutter weighs approximately 240kg and is made of robust plated steel and stainless steel components to resist corrosion. It can be used at any water depth and custom designs are available upon request.TRUMPF Roofing and Walls
The document provides information about TRUMPF power tools for roofing and facade work. It describes several cutting and shearing tools, including slitting shears that can cut materials up to 2.5mm thick. It also details nibblers that can cut a variety of metal materials and profiles. Technical specifications are provided for each tool, including maximum material thickness, battery life, weight and included accessories. Contact information is given for TRUMPF locations in Switzerland and the UK.
Webtools WCS38D Wire Rope Cutters up to 38mm - Data Sheet
The document describes a heavy-duty wire rope cutter called the WCS38D that is designed for cutting wire ropes and cables in severe conditions. It can cut wire ropes up to 38mm in diameter made of 1770N/mm2 grade steel. The cutter has a closed jaw design, corrosion resistant stainless steel construction, and long blade life. It is suitable for use at any water depth and in confined spaces.
Rautomead Newsletter issue 03
Rautomead Newsletter issue 03
continuouscasting.com
For over 30 years Rautomead Limited has specialised in the design and manufacture of continuous casting equipment for non-ferrous metals and alloys. There are now more than 300 Rautomead machines in operation in over 45 different countries worldwide.
Rautomead plants are being successfully applied to production of oxygen-free copper, a wide range of copper-based alloys, precious metals and zinc. Forms include wire rod, straight length bars, flats and hollow sections. According to material and section, the casting process selected may be vertical upwards, vertical downwards or horizontal. The machines may be used either as integrated melting, holding and casting machines, or may be arranged to be fed with pre-alloyed molten metal.
The Rautomead Continuous Casting System is based on electric resistance heating of its furnaces, with graphite containment crucibles, graphite heating elements and casting dies. This technology is particularly suited for production of high purity, high quality oxygen-free copper and copper alloy wire rods (copper silver, copper magnesium, copper tin).
The upward casting equipment may be used to manufacture rods of all diameters between 8.0mm and 30mm diameter and is suitable feedstock for wire drawing and continuous rotary extrusion processes. End use applications include: superfine wire, automotive wires, contact wire and trolley wires for high speed trains, data communication cables, CTC and transformer strips as well as enamelled wires.
Rautomead’s R&D facility at the factory in Dundee (casting equipment, technicians, design and operational experience) is available to companies who wish to commission experimental and research work to develop technology and tooling for the manufacture and processing of new alloys and materials. Rautomead’s partnership with the University of Dundee provides access to sophisticated laboratory equipment as well as support with analytical evaluation and academic contributions to the R&D effort
TAMS Industries fact sheet
TAMS Industries is a fabrication facility specializing in heavy metal fabrication, large machine orders, and customized manufacturing solutions. It has over 150,000 square feet of manufacturing space with various CNC and manual machines, including lathes, mills, plasma tables, and presses. The facility is equipped to handle large steel fabrication projects with capabilities like plate cutting up to 3 inches thick and bending up to 12 feet wide. It aims to provide quality manufacturing services to customers in industries like oil and gas.
Ripley Utility Tool MK01A - Outer Jacket Cable Stripper
This document provides information on two cable jacket strippers, the MK04 and MK01A. The MK04 is designed for stripping large diameter cables from 0.79 to 2.36 inches. It features adjustable blades, roller support for smooth stripping, and can perform spiral cuts, longitudinal cuts or end stripping. The MK01A is for stripping insulation from 0.31 to 0.98 inch cables and removing copper screening from coaxial cables. It also has adjustable blades and roller support for precise stripping of materials like rubber, PVC, nylon and cotton. Both strippers are designed for industrial environments and consistent, repetitive stripping jobs.
CUTTING TOOLS USED FOR CUTTING OF STONE
This report discusses about different types of tools that are required for cutting stones.
This is a study project that was done in 5th semester of B.Tech. for subject Manufacturing Process and Metallurgy.
Mirage Overview 2017
Mirage Machines is a UK-based company founded in 1993 that designs and manufactures portable on-site machining equipment. The company's products include flange facing machines, orbital milling machines, pipe cutting saws, hot tapping machines, milling machines, and more. Mirage serves a variety of industries including oil and gas, wind, nuclear, and shipbuilding. The document provides an overview of Mirage's history and product lines.
Orthodontics archwaire & treatment plan
Orthodontic archwires are a major component of fixed orthodontic therapy and come in various materials and designs. The document discusses the definition and requirements of archwires. It describes common wire types including precious metal alloys, stainless steel, cobalt-chromium, beta-titanium, and nickel-titanium. Placement techniques and a basic treatment plan approach are also outlined. Selection of the proper wire involves considering its mechanical properties and how they relate to the treatment goals and phase.
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
This document provides information about a heavy duty wire rope cutter designed for use by remote operated vehicles (ROVs) in severe conditions. The cutter can cut wire ropes up to 190mm in diameter and 1880N/mm2 grade, and can operate at any water depth. It has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The cutter weighs approximately 295kg and is made from robust plated steel and stainless steel components to resist corrosion.Similar to Webtools RCO40LP Wire Rope Cutters (20)
Webtools WCOS38DLP (open sided) Wire Rope Cutters up to 38mm - Data Sheet
Webtools WCOS38DLP (open sided) Wire Rope Cutters up to 38mm - Data Sheet
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Brochure Norton Clipper CDM handheld drilling motors
Brochure Norton Clipper CDM handheld drilling motors
Webtools RCV115 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV115 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV155 Wire Rope Cutters Electroless Nickel Plated Steel Construction
Webtools RCV155 Wire Rope Cutters Electroless Nickel Plated Steel Construction
Webtools WCS38D Wire Rope Cutters up to 38mm - Data Sheet
Webtools WCS38D Wire Rope Cutters up to 38mm - Data Sheet
Ripley Utility Tool MK01A - Outer Jacket Cable Stripper
Ripley Utility Tool MK01A - Outer Jacket Cable Stripper
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Recently uploaded (20)
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Webtools RCO40LP Wire Rope Cutters
- 1. • Cutting Capacity - Steel wire ropes up to Ø38mm (1.5”) with a maximum tensile strength of 1960N/mm². Individual wire strands must be a minimum of Ø1.5mm (1/16”) • Suitable for cutting wire rope, cables and umbilicals • 220 bar maximum input pressure • Supplied with 10k rated JIC No 4 fittings • Approx weight in air – 22kg • Approx weight in water – 19kg • Swept volume cut stroke – 0.5 litres • Swept volume return stroke – 0.4 litres RCO40LP - Wire Rope Cutter Part No - 980503 • Heavy duty wire rope cutter designed for use in severe working conditions • Open sided design allows for easy positioning of the cutter on the cable • Blade shaped anvil cuts higher grade cable • Corrosion resistant stainless steel body with Nitrotec coated alloy steel cylinder • Long blade and anvil life ensures that tool maintenance is kept to a minimum • Ideal for operation in confined spaces • Can be used at any water depth Webtool – A division of Allspeeds Royal Works, Atlas Street Clayton-Le-Moors, Accrington, Lancashire. BB5 5LW UK Tel: +44 (0) 1254 615 100 Fax: +44 (0) 1254 615 199 Rev 4 Iss 3 (20760) – Sept 2014 www.allspeeds.co.uk Webtool is a Trademark of Allspeeds Ltd Designed and Manufactured in the UK TM Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.cablejoints.co.uk www.thorneanderrick.co.uk