Webtools WCS38D Wire Rope Cutters up to 38mm - Data Sheet
•
0 likes•364 views
The document describes a heavy-duty wire rope cutter called the WCS38D that is designed for cutting wire ropes and cables in severe conditions. It can cut wire ropes up to 38mm in diameter made of 1770N/mm2 grade steel. The cutter has a closed jaw design, corrosion resistant stainless steel construction, and long blade life. It is suitable for use at any water depth and in confined spaces.
Report
Share
Report
Share
Download to read offline
Recommended
Webtools WCOS38DLP (open sided) Wire Rope Cutters up to 38mm - Data Sheet
Webtools WCOS38DLP (open sided) Wire Rope Cutters up to 38mm - Data SheetThorne & Derrick International
The WCS38DLP is a heavy duty wire rope cutter designed to cut wire ropes up to 38mm in diameter in severe conditions. It can cut at any depth, has a maximum pressure of 220 bar, weighs 16.4kg, and features a closed jaw and removable anvil pin for positioning. It is made of corrosion resistant stainless steel for long life and minimal maintenance.Webtools WCS54D Wire Rope Cutters up to 54mm - Data Sheet
The document provides information about the WCS54D wire rope cutter, which can cut wire rope up to 54mm in diameter made of 1770N/mm2 grade steel. It is suitable for use at any water depth and also to cut cables and umbilicals. The wire rope cutter weighs approximately 22kg, has a maximum input pressure of 700 bars, and features a corrosion resistant stainless steel construction and manual anvil for diver operation.
Webtools RCV155 Wire Rope Cutters Electroless Nickel Plated Steel Construction
Webtools RCV155 Wire Rope Cutters Electroless Nickel Plated Steel ConstructionThorne & Derrick International
This document describes a heavy duty wire rope cutter called the RCV155 that is designed to cut wire ropes and cables underwater. It can cut ropes up to 155mm in diameter and operates using hydraulic pressure of up to 690 bars for the main cylinder and 210 bars for the anvil. The cutter weighs approximately 240kg and is made of robust plated steel and stainless steel components to resist corrosion. It can be used at any water depth and custom designs are available upon request.Webtools RCO54 Wire Rope Cutters - Data Sheet
The document describes a heavy duty wire rope cutter called the RCO54 that is designed for severe working conditions. It can cut wire ropes up to 54mm in diameter and has a corrosion resistant stainless steel body. The cutter has a long-lasting blade and anvil to minimize maintenance and is suitable for operation in confined spaces. Optional accessories include a hydraulic intensifier panel and handle.
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
This document provides information about the RCV135 wire rope cutter. It can cut wire ropes up to 135mm in diameter made of 1770N/mm2 grade steel. It is suitable for underwater use at any depth and can cut wire ropes, cables, and umbilicals. The cutter has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. It weighs approximately 176kg and is made of robust plated steel and stainless steel to resist corrosion. Custom designs are available upon request.Webtools RCV115 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV115 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
The document describes a heavy duty wire rope cutter called the RCV115 that is designed for use in severe working conditions underwater. It can cut wire rope up to 115mm in diameter and is suitable for cutting various cables and umbilicals. The cutter uses hydraulics to operate the anvil and can cut ropes at any water depth, with customized designs available upon request.Webtools SL55 Softline Cutters - Data Sheet
The document describes the SL55 softline cutter, a hydraulically operated tool for cutting fiber ropes that has a maximum cutting capacity of 55mm diameter rope, can operate at any water depth up to 210 bar pressure, and weighs approximately 9.7kg. It has a lightweight aluminum and stainless steel construction, can be used by divers or ROVs, and provides quick and efficient cutting with a long-lasting blade to minimize maintenance needs. Bespoke models are available upon request.
Webtools WCS75HDZ Wire Rope Cutters up to 75mm - Data Sheet
The WCS75HDZ is a heavy-duty hydraulic wire rope cutter designed for use in severe conditions by ROVs. It can cut wire rope up to 75mm in diameter with strengths up to 1770N/mm2 and is suitable for cutting various cables and umbilicals. Made of corrosion-resistant stainless steel, it has an hydraulic anvil for easy positioning and long-lasting blades to minimize maintenance.
Recommended
Webtools WCOS38DLP (open sided) Wire Rope Cutters up to 38mm - Data Sheet
Webtools WCOS38DLP (open sided) Wire Rope Cutters up to 38mm - Data SheetThorne & Derrick International
The WCS38DLP is a heavy duty wire rope cutter designed to cut wire ropes up to 38mm in diameter in severe conditions. It can cut at any depth, has a maximum pressure of 220 bar, weighs 16.4kg, and features a closed jaw and removable anvil pin for positioning. It is made of corrosion resistant stainless steel for long life and minimal maintenance.Webtools WCS54D Wire Rope Cutters up to 54mm - Data Sheet
The document provides information about the WCS54D wire rope cutter, which can cut wire rope up to 54mm in diameter made of 1770N/mm2 grade steel. It is suitable for use at any water depth and also to cut cables and umbilicals. The wire rope cutter weighs approximately 22kg, has a maximum input pressure of 700 bars, and features a corrosion resistant stainless steel construction and manual anvil for diver operation.
Webtools RCV155 Wire Rope Cutters Electroless Nickel Plated Steel Construction
Webtools RCV155 Wire Rope Cutters Electroless Nickel Plated Steel ConstructionThorne & Derrick International
This document describes a heavy duty wire rope cutter called the RCV155 that is designed to cut wire ropes and cables underwater. It can cut ropes up to 155mm in diameter and operates using hydraulic pressure of up to 690 bars for the main cylinder and 210 bars for the anvil. The cutter weighs approximately 240kg and is made of robust plated steel and stainless steel components to resist corrosion. It can be used at any water depth and custom designs are available upon request.Webtools RCO54 Wire Rope Cutters - Data Sheet
The document describes a heavy duty wire rope cutter called the RCO54 that is designed for severe working conditions. It can cut wire ropes up to 54mm in diameter and has a corrosion resistant stainless steel body. The cutter has a long-lasting blade and anvil to minimize maintenance and is suitable for operation in confined spaces. Optional accessories include a hydraulic intensifier panel and handle.
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV135 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
This document provides information about the RCV135 wire rope cutter. It can cut wire ropes up to 135mm in diameter made of 1770N/mm2 grade steel. It is suitable for underwater use at any depth and can cut wire ropes, cables, and umbilicals. The cutter has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. It weighs approximately 176kg and is made of robust plated steel and stainless steel to resist corrosion. Custom designs are available upon request.Webtools RCV115 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV115 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
The document describes a heavy duty wire rope cutter called the RCV115 that is designed for use in severe working conditions underwater. It can cut wire rope up to 115mm in diameter and is suitable for cutting various cables and umbilicals. The cutter uses hydraulics to operate the anvil and can cut ropes at any water depth, with customized designs available upon request.Webtools SL55 Softline Cutters - Data Sheet
The document describes the SL55 softline cutter, a hydraulically operated tool for cutting fiber ropes that has a maximum cutting capacity of 55mm diameter rope, can operate at any water depth up to 210 bar pressure, and weighs approximately 9.7kg. It has a lightweight aluminum and stainless steel construction, can be used by divers or ROVs, and provides quick and efficient cutting with a long-lasting blade to minimize maintenance needs. Bespoke models are available upon request.
Webtools WCS75HDZ Wire Rope Cutters up to 75mm - Data Sheet
The WCS75HDZ is a heavy-duty hydraulic wire rope cutter designed for use in severe conditions by ROVs. It can cut wire rope up to 75mm in diameter with strengths up to 1770N/mm2 and is suitable for cutting various cables and umbilicals. Made of corrosion-resistant stainless steel, it has an hydraulic anvil for easy positioning and long-lasting blades to minimize maintenance.
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
This document provides information about a heavy duty wire rope cutter designed for use by remote operated vehicles (ROVs) in severe conditions. The cutter can cut wire ropes up to 190mm in diameter and 1880N/mm2 grade, and can operate at any water depth. It has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The cutter weighs approximately 295kg and is made from robust plated steel and stainless steel components to resist corrosion.Webtools SL80 Softline Cutters - Data Sheet
The document describes a softline cutter tool called the SL80 that can cut fiber ropes up to 80mm in diameter, operate at any water depth up to a maximum pressure of 690 bar, weighs approximately 14.2 kg, and has a lightweight aluminum and stainless steel construction for diver or ROV operation. It provides quick and efficient cutting with a long-lasting blade to minimize maintenance needs.
Alroc ALROCRAN Tightening Pliers For Screen Connectors
The document provides information about the ALROCRAN tool for tightening the outer sheath and inner aluminum layer of MV cable screen connectors. The ALROCRAN tool has a capacity of cables with diameters between 26-40mm and can tighten screen connectors for cable cross-sections of 50-240mm2. It has dimensions of 281mm in length, 104mm in width, and 48mm in height. The tool does not require any additional packaging.
Alroc K7/FNS Blade Support With Blade LFNS For Bonded Semicon Layer
The K7/FNS is a blade support tool that mounts on Alroc AMF4 and AMF5 series tools. It has a blade that performs smoothing and chamfering of the transition from bonded semiconductor to insulation on HV cables between 55-160mm in diameter. It allows for quick setup on the tools thanks to push-button operation and provides low surface roughness once the semiconductor has been removed. The tool has no dimensions or weight as it is meant to mount on other Alroc cable processing machines.
Webtool HCV155 Cable Umbilical and Riser Cutter - Data Sheet
This document provides information about the HCV155 cable/umbilical/riser cutter tool. It can cut materials up to 155mm in diameter, works at any water depth, and has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The tool weighs approximately 162kg and is made of robust plated steel to resist corrosion with a long-lasting blade. It is suitable for heavy duty cutting of cables, lines, and risers in severe conditions.
Webtools SL135 Softline Cutters - Data Sheet
The document describes a softline cutter tool called the SL135 that can cut fiber ropes up to 135mm in diameter, operate at any water depth up to 690 bar pressure, and weighs approximately 34kg in air and 23kg in water. It has a lightweight aluminum and stainless steel construction, and can be operated by divers or ROVs to quickly and efficiently cut lines while providing long blade life and minimal maintenance.
Webtools RCV75HD Wire Rope Cutters Lightweight Aluminium Construction - Data ...
Webtools RCV75HD Wire Rope Cutters Lightweight Aluminium Construction - Data ...Thorne & Derrick International
The RCV75HD is a heavy duty wire rope cutter designed for use in severe conditions offshore. It has a hydraulically operated anvil for easy deployment from ROVs, and can cut wire ropes up to 75mm in diameter at depths of up to 1960N/mm2. Weighing 43kg in air and 30.5kg in water, it is lightweight with a long-lasting blade and integrated hydraulic system.Weidmuller Cable Stripping Tools - Stripax Insulation Stripping Tools
Weidmuller Cable Stripping Tools - Stripax Insulation Stripping Tools Thorne & Derrick International
This document provides information about stripping tools and the stripping process. It defines stripping as cutting and removing insulation from a conductor. It describes how stripping tools should precisely remove the correct length of insulation without damaging the conductor or remaining insulation. The document discusses various stripping tools for different cable types, sizes, and insulation materials. It provides technical specifications and ordering information for the tools.Webtool HCV100 Cable Umbilical and Riser Cutter - Data Sheet
The document describes a heavy-duty cable, umbilical, and riser cutter tool that can cut materials up to 100mm in diameter. It has a maximum hydraulic pressure of 690 bar for the main cylinder and 210 bar for the anvil. The lightweight aluminum tool weighs approximately 28.5kg and features a hydraulically operated anvil for easy deployment by ROVs in various water depths and conditions. Custom designs are available upon request.
Prysmian 8YRO-LHM Adjustable Screen Scoring Tools - Prysmian Cable Stripping ...
Prysmian 8YRO-LHM Adjustable Screen Scoring Tools - Prysmian Cable Stripping ...Thorne & Derrick International
This document describes various tooling components for removing and stripping cable sheaths and insulation. It lists pliers, strippers, and other tools for removing plastic, rubber, foil and soft metal sheaths from single-core or three-core cables. The tools are suitable for a range of cable diameters and are designed for tasks like removing bonded or peelable semi-conductor screens and trimming insulation without damaging cable cores.Mechanical overload switch
The document describes a mechanical overload switch for hoists and cranes produced by Vetec Asia Pacific and Vetec Aps. The switch has a minimal lifting height reduction of only 150mm in length. It provides quick and precise installation with simple tools and allows the user to visually see when the switch is correctly adjusted. The switch has a capacity of up to 5 tons and is available in stock from Vetec Aps in Denmark.
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...Thorne & Derrick International
The 424TX Series brass barrier gland is certified for use in hazardous areas. It provides an IP66 seal for wire braided cables and can be used in Zone 1, Zone 2, and other hazardous areas. The gland is weatherproof, waterproof, and available in various thread sizes and cable diameter ranges to suit a wide variety of applications.Shandwood Brochure
The document discusses Shandwood Engineering Ltd, a market leader in innovative oilfield screw conveyors. It describes their Easi-Fit screw conveyor which features easy assembly and maintenance capabilities. This helps reduce non-productive time on rigs. The conveyors are fully certified and comply with all applicable safety standards. Shandwood also has a global reach with facilities in Scotland, Singapore, and Dubai to support customers worldwide.
Alroc EVNPT Cable Jointing Tool To Spread PE Outer Sheath With Aluminium Screen
Alroc EVNPT Cable Jointing Tool To Spread PE Outer Sheath With Aluminium ScreenThorne & Derrick International
This document provides information about the EV/NPT tool. The tool is used to spread the polyethylene outer sheath with an aluminum screen of medium voltage cables without damaging the aluminum. It has a limited opening angle to prevent breaking the aluminum. The tool has a diameter range of 15-240 mm and is 230 mm in length, 15 mm wide, and 40 mm tall. It weighs 0.24 kg and is not packaged.Iwiss Pneumatic Crimper and Electrical Crimping Tools for various of terminal...
Iwiss Pneumatic Crimper and Electrical Crimping Tools used for various of terminals and wire connectors with CE and ISO9001 certifications.
Prysmian UNI25+ Cable Sheath Removal & Stripping Tools 25mm
This document lists and describes various cable connectors, tools, and accessories including:
1. Stripping tools and spare blades for cables with diameters ranging from up to 8mm to 40mm.
2. A battery powered hydraulic cutting head, spare blades, and 240V charger.
3. A ratchet cable cutter for cutting cables up to 80mm diameter.
4. A hydraulic compression head for installing copper and aluminum connectors from 150mm2 to 1000mm2.
5. A battery hydraulic tool for compression with a 10 tonne force and carrying case.
Cembre HF2 Crimpstar Crimping Tool - Ratchet Controlled Crimping Tool
Crimping Tools - Cembre Ratchet Type
Cembre HF Crimpstar Ratchet Crimping Tool
Crimping Application - Open Barrel Brass Terminals
Cembre Crimping Tool HF1 0.5sqmm to 4sqmm conductors
Cembre Crimping Tool HF2 0.08sqmm to 1.3sqmm conductors (28-16 AWG)
The Cembre Crimpstar range of ratchet controlled crimping tools are compact, lightweight and easy to use.
Ripley Utility Tool WS 14A - High Voltage Pencilling Tool
This document provides information about electric utility distribution and transmission cable pencilling tools. It lists several models of pencilling tools, including the WS 16, WS 17, and WS 14A. It provides the taper length, tool length, and weight for each model. It also describes that the tools are for transmission and distribution cables, and lists the typical voltage ranges and cable sizes for each model. The document states that the pencilling operation takes less than five minutes and creates a smooth taper, while ensuring safety. It recommends using other specific stripping tools to remove insulation and shielding prior to using the pencilling tools.
Band-It - Stainless Steel Banding, Strapping, Clamping & Tools
BAND-IT stainless steel strapping and banding systems offer astonishing corrosion, pressure and temperature performance for industrial, offshore and subsea cable and pipe strapping, banding and securing.
BAND-IT band typical stainless steel strapping applications : down hole strapping, offshore oil platforms, under sea cable banding, pipe line strapping, water treatment, desalinization, chemical plants, underground cables or pipes, marine, furnace, high temperature strapping applications.
BAND-IT are world leaders in quality engineered stainless steel (grades 201, 304, 316), monel and inconel band clamping and cable tie fastening solutions BAND-IT service marine, offshore, subsea, petrochemical, oil and gas, rail, utilities, street lighting, power and construction industries - BAND-IT products include Adjustable Clamping Systems, Band & Buckle, Strapping & Banding Systems, Sign Brackets, Hose Fittings, Cable & Pipe Identification Systems, Preformed Clamping, Stainless Steel Cable Ties.
Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet
The document provides information on the WGO135 cable gripping and lifting tool. It can lift up to 20 tonnes and grip cables with diameters up to 135mm. Made of corrosion resistant aluminum and stainless steel, it is robust, lightweight, and can be used at any water depth to retrieve and decommission cables and umbilicals. It has a secondary locking system to ensure the grip does not release during lifting.
factsheet_corporate_EN
Dottransfers.com is a global marketplace that offers ground transportation solutions and executive transfer services for companies worldwide. Through their online platform, customers can request quotes, book services, and manage all executive transportation hires and expenses across over 260 cities globally from a single customized account 24/7. They aim to enhance companies' management of transportation needs anywhere in the world with high quality vehicles and 24/7 support.
More Related Content
What's hot
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...Thorne & Derrick International
This document provides information about a heavy duty wire rope cutter designed for use by remote operated vehicles (ROVs) in severe conditions. The cutter can cut wire ropes up to 190mm in diameter and 1880N/mm2 grade, and can operate at any water depth. It has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The cutter weighs approximately 295kg and is made from robust plated steel and stainless steel components to resist corrosion.Webtools SL80 Softline Cutters - Data Sheet
The document describes a softline cutter tool called the SL80 that can cut fiber ropes up to 80mm in diameter, operate at any water depth up to a maximum pressure of 690 bar, weighs approximately 14.2 kg, and has a lightweight aluminum and stainless steel construction for diver or ROV operation. It provides quick and efficient cutting with a long-lasting blade to minimize maintenance needs.
Alroc ALROCRAN Tightening Pliers For Screen Connectors
The document provides information about the ALROCRAN tool for tightening the outer sheath and inner aluminum layer of MV cable screen connectors. The ALROCRAN tool has a capacity of cables with diameters between 26-40mm and can tighten screen connectors for cable cross-sections of 50-240mm2. It has dimensions of 281mm in length, 104mm in width, and 48mm in height. The tool does not require any additional packaging.
Alroc K7/FNS Blade Support With Blade LFNS For Bonded Semicon Layer
The K7/FNS is a blade support tool that mounts on Alroc AMF4 and AMF5 series tools. It has a blade that performs smoothing and chamfering of the transition from bonded semiconductor to insulation on HV cables between 55-160mm in diameter. It allows for quick setup on the tools thanks to push-button operation and provides low surface roughness once the semiconductor has been removed. The tool has no dimensions or weight as it is meant to mount on other Alroc cable processing machines.
Webtool HCV155 Cable Umbilical and Riser Cutter - Data Sheet
This document provides information about the HCV155 cable/umbilical/riser cutter tool. It can cut materials up to 155mm in diameter, works at any water depth, and has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The tool weighs approximately 162kg and is made of robust plated steel to resist corrosion with a long-lasting blade. It is suitable for heavy duty cutting of cables, lines, and risers in severe conditions.
Webtools SL135 Softline Cutters - Data Sheet
The document describes a softline cutter tool called the SL135 that can cut fiber ropes up to 135mm in diameter, operate at any water depth up to 690 bar pressure, and weighs approximately 34kg in air and 23kg in water. It has a lightweight aluminum and stainless steel construction, and can be operated by divers or ROVs to quickly and efficiently cut lines while providing long blade life and minimal maintenance.
Webtools RCV75HD Wire Rope Cutters Lightweight Aluminium Construction - Data ...
Webtools RCV75HD Wire Rope Cutters Lightweight Aluminium Construction - Data ...Thorne & Derrick International
The RCV75HD is a heavy duty wire rope cutter designed for use in severe conditions offshore. It has a hydraulically operated anvil for easy deployment from ROVs, and can cut wire ropes up to 75mm in diameter at depths of up to 1960N/mm2. Weighing 43kg in air and 30.5kg in water, it is lightweight with a long-lasting blade and integrated hydraulic system.Weidmuller Cable Stripping Tools - Stripax Insulation Stripping Tools
Weidmuller Cable Stripping Tools - Stripax Insulation Stripping Tools Thorne & Derrick International
This document provides information about stripping tools and the stripping process. It defines stripping as cutting and removing insulation from a conductor. It describes how stripping tools should precisely remove the correct length of insulation without damaging the conductor or remaining insulation. The document discusses various stripping tools for different cable types, sizes, and insulation materials. It provides technical specifications and ordering information for the tools.Webtool HCV100 Cable Umbilical and Riser Cutter - Data Sheet
The document describes a heavy-duty cable, umbilical, and riser cutter tool that can cut materials up to 100mm in diameter. It has a maximum hydraulic pressure of 690 bar for the main cylinder and 210 bar for the anvil. The lightweight aluminum tool weighs approximately 28.5kg and features a hydraulically operated anvil for easy deployment by ROVs in various water depths and conditions. Custom designs are available upon request.
Prysmian 8YRO-LHM Adjustable Screen Scoring Tools - Prysmian Cable Stripping ...
Prysmian 8YRO-LHM Adjustable Screen Scoring Tools - Prysmian Cable Stripping ...Thorne & Derrick International
This document describes various tooling components for removing and stripping cable sheaths and insulation. It lists pliers, strippers, and other tools for removing plastic, rubber, foil and soft metal sheaths from single-core or three-core cables. The tools are suitable for a range of cable diameters and are designed for tasks like removing bonded or peelable semi-conductor screens and trimming insulation without damaging cable cores.Mechanical overload switch
The document describes a mechanical overload switch for hoists and cranes produced by Vetec Asia Pacific and Vetec Aps. The switch has a minimal lifting height reduction of only 150mm in length. It provides quick and precise installation with simple tools and allows the user to visually see when the switch is correctly adjusted. The switch has a capacity of up to 5 tons and is available in stock from Vetec Aps in Denmark.
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...Thorne & Derrick International
The 424TX Series brass barrier gland is certified for use in hazardous areas. It provides an IP66 seal for wire braided cables and can be used in Zone 1, Zone 2, and other hazardous areas. The gland is weatherproof, waterproof, and available in various thread sizes and cable diameter ranges to suit a wide variety of applications.Shandwood Brochure
The document discusses Shandwood Engineering Ltd, a market leader in innovative oilfield screw conveyors. It describes their Easi-Fit screw conveyor which features easy assembly and maintenance capabilities. This helps reduce non-productive time on rigs. The conveyors are fully certified and comply with all applicable safety standards. Shandwood also has a global reach with facilities in Scotland, Singapore, and Dubai to support customers worldwide.
Alroc EVNPT Cable Jointing Tool To Spread PE Outer Sheath With Aluminium Screen
Alroc EVNPT Cable Jointing Tool To Spread PE Outer Sheath With Aluminium ScreenThorne & Derrick International
This document provides information about the EV/NPT tool. The tool is used to spread the polyethylene outer sheath with an aluminum screen of medium voltage cables without damaging the aluminum. It has a limited opening angle to prevent breaking the aluminum. The tool has a diameter range of 15-240 mm and is 230 mm in length, 15 mm wide, and 40 mm tall. It weighs 0.24 kg and is not packaged.Iwiss Pneumatic Crimper and Electrical Crimping Tools for various of terminal...
Iwiss Pneumatic Crimper and Electrical Crimping Tools used for various of terminals and wire connectors with CE and ISO9001 certifications.
Prysmian UNI25+ Cable Sheath Removal & Stripping Tools 25mm
This document lists and describes various cable connectors, tools, and accessories including:
1. Stripping tools and spare blades for cables with diameters ranging from up to 8mm to 40mm.
2. A battery powered hydraulic cutting head, spare blades, and 240V charger.
3. A ratchet cable cutter for cutting cables up to 80mm diameter.
4. A hydraulic compression head for installing copper and aluminum connectors from 150mm2 to 1000mm2.
5. A battery hydraulic tool for compression with a 10 tonne force and carrying case.
Cembre HF2 Crimpstar Crimping Tool - Ratchet Controlled Crimping Tool
Crimping Tools - Cembre Ratchet Type
Cembre HF Crimpstar Ratchet Crimping Tool
Crimping Application - Open Barrel Brass Terminals
Cembre Crimping Tool HF1 0.5sqmm to 4sqmm conductors
Cembre Crimping Tool HF2 0.08sqmm to 1.3sqmm conductors (28-16 AWG)
The Cembre Crimpstar range of ratchet controlled crimping tools are compact, lightweight and easy to use.
Ripley Utility Tool WS 14A - High Voltage Pencilling Tool
This document provides information about electric utility distribution and transmission cable pencilling tools. It lists several models of pencilling tools, including the WS 16, WS 17, and WS 14A. It provides the taper length, tool length, and weight for each model. It also describes that the tools are for transmission and distribution cables, and lists the typical voltage ranges and cable sizes for each model. The document states that the pencilling operation takes less than five minutes and creates a smooth taper, while ensuring safety. It recommends using other specific stripping tools to remove insulation and shielding prior to using the pencilling tools.
Band-It - Stainless Steel Banding, Strapping, Clamping & Tools
BAND-IT stainless steel strapping and banding systems offer astonishing corrosion, pressure and temperature performance for industrial, offshore and subsea cable and pipe strapping, banding and securing.
BAND-IT band typical stainless steel strapping applications : down hole strapping, offshore oil platforms, under sea cable banding, pipe line strapping, water treatment, desalinization, chemical plants, underground cables or pipes, marine, furnace, high temperature strapping applications.
BAND-IT are world leaders in quality engineered stainless steel (grades 201, 304, 316), monel and inconel band clamping and cable tie fastening solutions BAND-IT service marine, offshore, subsea, petrochemical, oil and gas, rail, utilities, street lighting, power and construction industries - BAND-IT products include Adjustable Clamping Systems, Band & Buckle, Strapping & Banding Systems, Sign Brackets, Hose Fittings, Cable & Pipe Identification Systems, Preformed Clamping, Stainless Steel Cable Ties.
Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet
The document provides information on the WGO135 cable gripping and lifting tool. It can lift up to 20 tonnes and grip cables with diameters up to 135mm. Made of corrosion resistant aluminum and stainless steel, it is robust, lightweight, and can be used at any water depth to retrieve and decommission cables and umbilicals. It has a secondary locking system to ensure the grip does not release during lifting.
What's hot (20)
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Webtools RCV190 Wire Rope Cutters Electroless Nickel Plated Steel Constructio...
Alroc ALROCRAN Tightening Pliers For Screen Connectors
Alroc ALROCRAN Tightening Pliers For Screen Connectors
Alroc K7/FNS Blade Support With Blade LFNS For Bonded Semicon Layer
Alroc K7/FNS Blade Support With Blade LFNS For Bonded Semicon Layer
Webtool HCV155 Cable Umbilical and Riser Cutter - Data Sheet
Webtool HCV155 Cable Umbilical and Riser Cutter - Data Sheet
Webtools RCV75HD Wire Rope Cutters Lightweight Aluminium Construction - Data ...
Webtools RCV75HD Wire Rope Cutters Lightweight Aluminium Construction - Data ...
Weidmuller Cable Stripping Tools - Stripax Insulation Stripping Tools
Weidmuller Cable Stripping Tools - Stripax Insulation Stripping Tools
Webtool HCV100 Cable Umbilical and Riser Cutter - Data Sheet
Webtool HCV100 Cable Umbilical and Riser Cutter - Data Sheet
Prysmian 8YRO-LHM Adjustable Screen Scoring Tools - Prysmian Cable Stripping ...
Prysmian 8YRO-LHM Adjustable Screen Scoring Tools - Prysmian Cable Stripping ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...
Alroc EVNPT Cable Jointing Tool To Spread PE Outer Sheath With Aluminium Screen
Alroc EVNPT Cable Jointing Tool To Spread PE Outer Sheath With Aluminium Screen
Iwiss Pneumatic Crimper and Electrical Crimping Tools for various of terminal...
Iwiss Pneumatic Crimper and Electrical Crimping Tools for various of terminal...
Prysmian UNI25+ Cable Sheath Removal & Stripping Tools 25mm
Prysmian UNI25+ Cable Sheath Removal & Stripping Tools 25mm
Cembre HF2 Crimpstar Crimping Tool - Ratchet Controlled Crimping Tool
Cembre HF2 Crimpstar Crimping Tool - Ratchet Controlled Crimping Tool
Ripley Utility Tool WS 14A - High Voltage Pencilling Tool
Ripley Utility Tool WS 14A - High Voltage Pencilling Tool
Band-It - Stainless Steel Banding, Strapping, Clamping & Tools
Band-It - Stainless Steel Banding, Strapping, Clamping & Tools
Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet
Webtools WGO135 Cable Gripping & Lifting Tools - Data Sheet
Viewers also liked
factsheet_corporate_EN
Dottransfers.com is a global marketplace that offers ground transportation solutions and executive transfer services for companies worldwide. Through their online platform, customers can request quotes, book services, and manage all executive transportation hires and expenses across over 260 cities globally from a single customized account 24/7. They aim to enhance companies' management of transportation needs anywhere in the world with high quality vehicles and 24/7 support.
2013 Certificate of AASIS Skill Achievement AASIS Overview and Basic Navigation
Wafter Washington completed an AASIS training course on MRS Overview and Basic Navigation and was awarded a Certificate of Achievement on October 4, 2013 to certify his successful completion of the instruction and certification activity for the course. The certificate was granted by the Arkansas Administrative Statewide Information System.
Entrevista Mosh (Suplemento "El Camaleón" del Diario de Noticias) - 24/10/14
24/10/14 - Entrevista a MOSH publicada en el suplemento musical "El Camaleón" del Diario de Noticias. By: F. Garayoa
Công ty tổ chức lễ khởi công khánh thành chuyên nghiệp nhất ở tại vĩnh long
Công ty tổ chức lễ khởi công khánh thành chuyên nghiệp nhất ở tại vĩnh longCÔNG TY TỔ CHỨC SỰ KIỆN VIETSKY
Công ty tổ chức lễ khởi công khánh thành chuyên nghiệp nhất ở tại vĩnh longWolf ATEX Turbolites - Spec Sheet
The ATEX Turbolite is a high-powered compressed air lamp that meets European and American safety standards for use in explosive atmospheres. It provides illumination for hazardous industrial activities like tank cleaning and pipeline work. Models include area lights and flood lights available in aluminum or brass housings. The lamp is powered by a turbine driven by compressed air, which generates electricity to power a halogen bulb. It has improvements like sealed bearings and stainless steel components for greater reliability.
Peli Torches - Hazardous Area Zone 1 Zone 2 ATEX Torches
Peli torches are for use in hazardous areas and comply with ATEX directive - Peli torches are certified to ATEX Zone 0 (Category 1) or Zone 1 (Category 2). Peli hazardous area torches can also be certified to Dust Zone 20 and 21.
Peli torches with ATEX certification are specified to provide lighting in hazardous areas - hazardous areas are locations in which special precautions are required when using electrical equipment due to the presence of potentially explosive atmospheres. Peli torches are available in hands-free, rechargeable and helmet mounted torch types.
Hazardous Area Zones Classification
Zone 1 - where flammable atmosphere is likely to occur during normal operation.
Zone 2 - where flammable atmosphere is not likely to occur during normal operation and if it does will only exist for short period of time, typically less than 10 hours per year.
Zone 21 - a place in which an explosive atmosphere, in the form of a cloud of combustible dust in air, is likely to occur occasionally in normal operation.
Zone 22 - a place in which an explosive atmosphere, in the form of a cloud of combustible dust in air, is likely to occur in normal operation but, if it does occur, will persist only for a short period.
Peli Torches - ATEX Certification & Hazardous Areas
To meet the exacting requirements of ATEX directive 94/9/EC, Peli Torches are tested to ensure that they pose no threat of ignition when operating within hazardous area locations. Using approved laboratories, Peli Torches are tested to ensure that they will withstand rigorous impact and drop tests, severe environmental exposure and meet a minimum of IP54 solid and liquid particles ingress protection. Longevity and safety are assured by Peli design. Each Peli Torch certified by ATEX should have a code printed on its body. This ATEX code advises the user as to the hazarodus area in which the Peli Torch can be safely used without risk of explosion. The hazardous area (T) Temperature ratings are as follows for Peli Torches and general ATEX electrical equipment : T1=450ºC T2=300ºC T3=200ºC T4=135ºC T5=100ºC T6=85ºC.
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubes 3M
3M 8427-12 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Wolf Turbolites - Spec Sheet
The Turbolite is a high powered compressed air lamp certified for use in hazardous areas like oil and gas facilities. It provides safer lighting than low voltage options in wet and flammable gas conditions. The A-TL44 model has an all-round bay light, while the A-TL45 has a reflector head for direct or wide-angle illumination. Both have spark-free brass casings and are designed for harsh industrial use. They require a clean, dry compressed air supply to operate efficiently and prevent lens contamination.
Plymouth 77 Plyglas Pressure Sensitive Glass Cloth Tape
Plymouth 77 Plyglas is a 7 mil (0,18mm) woven glass fabric tape with a thermosetting rubber based, pressure sensitive adhesive used for insulating and protecting high temperature (130°C) connections, such as motor leads and transformer windings. Plymouth 77 Plyglas glass cloth tape has high tensile strength for splice reinforcement and provides excellent tear and abrasion resistance. Use 77 Plyglas pressure sensitive tape to hold down 53 Plyarc arc -and fire- proofing tape. Comm. Spec. 7611, ASTM-D-2754, MIL-I-15126F/GFT.
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...Thorne & Derrick International
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Grounding & Earth Braid Electrical TapesHellermann Tyton Outside Serrated Cable Ties
The document discusses cable ties for thin-walled bundles made of PA66HS plastic. It describes the OS-Series ties, which have a curved head that takes up less space and provides low insertion force. A table lists different OS-Series tie models varying in width, length, bundle diameter range, material, color, packaging, and part number. The ties are used where thin insulation wires are installed, such as in automotive and aircraft applications.
Stahl C-Lux 6500 Compact Light Fittings - ATEX Zone 1 Zone 2 Hazardous Area L...
Stahl C-Lux 6500 Compact Light Fittings - ATEX Zone 1 Zone 2 Hazardous Area L...Thorne & Derrick International
The document provides information on the Compact Light Fitting Series C-LUX 6100/6500. It includes details on the suitable mounting locations, central locking mechanism, emergency exit sign options, explosion protection certifications, technical specifications, and accessories. Selection tables show the available lamp, ballast, and order number configurations. Dimensions and installation notes are also provided.Wolf ATEX Safety Torch With LED - Spec Sheet
The ATEX Safety Torches with LED are certified for use in explosive gas and dust environments. They provide up to 4 times more light than incandescent bulbs and can last over 25,000 hours on a set of alkaline batteries. The compact, durable torch body is available in straight or right-angle models and has a low battery indicator light. It is sealed against dust and water with an IP67 rating.
Cold Shrink Splice Kit 3M 8427-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-6
Cold Shrink Tubes 3M
3M 8427-6 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-6 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
3M Cold Shrink Cable Joints Inline - 3M LC6 Low Voltage LV Cable Joint
3M Cold Shrink Cable Joints Inline - 3M LC6 Low Voltage LV Cable JointThorne & Derrick International
This document provides information on 3M's Cold Shrink LC Series Joints for low voltage polymeric cables. The joints use cold shrink technology to provide a quick and reliable seal without heat or special tools. They are suitable for cables up to 1.9/3.3kV and come with outer protection tubes, insulation tape, and connection components. The document lists available kit sizes and specifications, material properties, product selection information, and contact details for 3M.ATEX Control Station EEx with Green LED Lamp Indicator - Walsall LCP151
ATEX Control Station EEx with Green LED Lamp Indicator - Walsall LCP151Thorne & Derrick International
This document provides contact and product information for multiple global locations of Walsall Ltd, an industrial equipment supplier. It also provides specifications for one of their products, the LCP150 Ex e mb LED Indicator Lamp, including electrical and enclosure details, ordering information, hazardous area certification, and dimensional drawings.Ellis Patents VRT+14 Vulcan Stainless Steel Cable Cleats
The document provides information on Vulcan + cable cleats, including:
- They come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- They have a compact, patented design for easy installation in limited spaces and are made of stainless steel for durability.
- Technical specifications, test results, and approvals are provided to demonstrate the cable cleats' performance.
Viewers also liked (20)
სსიპ ზურაბ ჟვანიას სახელობის სახელმწიფო ადმინისტრირების სკოლა
სსიპ ზურაბ ჟვანიას სახელობის სახელმწიფო ადმინისტრირების სკოლა
2013 Certificate of AASIS Skill Achievement AASIS Overview and Basic Navigation
2013 Certificate of AASIS Skill Achievement AASIS Overview and Basic Navigation
Entrevista Mosh (Suplemento "El Camaleón" del Diario de Noticias) - 24/10/14
Entrevista Mosh (Suplemento "El Camaleón" del Diario de Noticias) - 24/10/14
Công ty tổ chức lễ khởi công khánh thành chuyên nghiệp nhất ở tại vĩnh long
Công ty tổ chức lễ khởi công khánh thành chuyên nghiệp nhất ở tại vĩnh long
Peli Torches - Hazardous Area Zone 1 Zone 2 ATEX Torches
Peli Torches - Hazardous Area Zone 1 Zone 2 ATEX Torches
Plymouth 77 Plyglas Pressure Sensitive Glass Cloth Tape
Plymouth 77 Plyglas Pressure Sensitive Glass Cloth Tape
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
Stahl C-Lux 6500 Compact Light Fittings - ATEX Zone 1 Zone 2 Hazardous Area L...
Stahl C-Lux 6500 Compact Light Fittings - ATEX Zone 1 Zone 2 Hazardous Area L...
3M Cold Shrink Cable Joints Inline - 3M LC6 Low Voltage LV Cable Joint
3M Cold Shrink Cable Joints Inline - 3M LC6 Low Voltage LV Cable Joint
ATEX Control Station EEx with Green LED Lamp Indicator - Walsall LCP151
ATEX Control Station EEx with Green LED Lamp Indicator - Walsall LCP151
Ellis Patents VRT+14 Vulcan Stainless Steel Cable Cleats
Ellis Patents VRT+14 Vulcan Stainless Steel Cable Cleats
Similar to Webtools WCS38D Wire Rope Cutters up to 38mm - Data Sheet
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
This document provides information about the HCV270 cable, umbilical, and riser cutter. The cutter can cut items up to 270mm in diameter, can be used at any water depth, and is suitable for cutting cables, hydraulic lines, risers, and umbilicals. It has a maximum input pressure of 690 bar for the main cylinder and 210 bar for the anvil. The cutter weighs approximately 352kg and has a robust, corrosion-resistant steel construction.
TRUMPF UK Power Tools Overview
TRUMPF is a manufacturer of machine tools, laser technology, and electronics. They are certified to ISO 9001 quality standards. This document provides an overview of TRUMPF's electric and cordless power tools for various industries such as sheet metal fabrication, automotive, construction, and more. Key tools discussed include slitting shears, nibblers, profile nibblers, and a panel cutter for cutting sheet metal, ducts, and sandwich panels.
Wiha Pliers Catalog
The document is a catalog listing various pliers, cutters, and crimping tools. It provides descriptions, specifications, and item numbers for insulated and uninsulated tools. Key tools highlighted include insulated lineman's pliers with crimping jaws, insulated combination pliers, and insulated diagonal cutters. The catalog also lists tool sets, holsters, and tools for specialized applications like electronics work.
Prysmian 8YR0-ASC40R Bonded Semi-Conductor Screen Removal Tool - Prysmian Scr...
Prysmian 8YR0-ASC40R Bonded Semi-Conductor Screen Removal Tool - Prysmian Scr...Thorne & Derrick International
This document describes various tooling components for removing and stripping cable sheaths and insulation. It lists pliers, strippers, and other tools for removing plastic, rubber, foil and soft metal sheaths from single-core or three-core cables. The tools are suitable for a range of cable diameters and are designed to remove sheaths and insulation without damaging the core. Spare blades are available for many of the tools.Prysmian 8YRO-LH Adjustable Insulation Stripping Tools - Prysmian Cable Strip...
Prysmian 8YRO-LH Adjustable Insulation Stripping Tools - Prysmian Cable Strip...Thorne & Derrick International
This document describes various tooling components for removing and stripping cable sheaths and insulation. It lists pliers, strippers, and other tools for removing plastic, rubber, foil and soft metal sheaths from single-core or three-core cables. The tools are suitable for a range of cable diameters and are designed to remove sheaths and insulation without damaging the core. Spare blades are available for many of the tools.Prysmian 8YRO-NO Insulation Chamfering Tools - Cylinder And Tapered Stripping...
Prysmian 8YRO-NO Insulation Chamfering Tools - Cylinder And Tapered Stripping...Thorne & Derrick International
Prysmian 8YRO-NO Insulation Chamfering Tools - Cylinder And Tapered Stripping Of High And Very High Voltage Single-Core Dry CablesPrysmian 8YR0-LHS Screen Stripping Tool - Prysmian Semi- Conductive Screen Re...
Prysmian 8YR0-LHS Screen Stripping Tool - Prysmian Semi- Conductive Screen Re...Thorne & Derrick International
This document describes various tooling components for removing and stripping cable sheaths and insulation. It lists pliers, strippers, and other tools for removing plastic, rubber, foil and soft metal sheaths from single-core or three-core cables. The tools are suitable for a range of cable diameters and are designed to remove sheaths and insulation without damaging the core. Spare blades are available for many of the tools.Wire Rope
Swaging is a method of securing wire rope with fittings like aluminum sleeves and stainless steel tension swage studs. The connection will exceed the rated breaking strength of the wire rope or cable when properly applied. Therefore,swaging is widely used to accomplish tasks of light-duty projects and industrial applications. The proper swaging connections require quality sleeve,corresponding wire rope, and correct swaging tool. IWISS with its sub-brand iCrimp offers a series of swaging tools for virtually any type of swaging connections, from wire rope cutter, manual swager, bench mounted swager, to pneumatic swaging machine. The tools offer all key features of modern tools, such as:
1. Made of premium steel, the tools are high strength durable for long service life. With special surface treatment, the tools achieve a high degree of water proof, and corrosion-resistant
2. Accurate hole design and well-polished jaws makes every connection perfect with virtually all sleeve and wire rope in the market
3. Adjustable function makes tight and trust- worth connection even after a long time using.
4. Ergonomic handle ensures optimal force-transmission and anti-fatigue operation.
IWISS tools are designed to make connections much easier. We insist on innovation and released new style swaging tools in the past years. We don’t follow the trend, but we lead it.
Wire Cutting & Stripping
Among a series of coordinated operations involved in making an electrical connection, cable cutting, and stripping are the initial and important preparation steps.
Proper preparation ensures high-quality connections. Our tools are in your good hands.
The first step, cutting. The cable must be cut cleanly, straightly without great effort. IWISS with its sub-brand iCrimp offers a variety of cutters to cover a range from thin fine-wire conductor to large diameter power supply cables. The cutters achieve the basic requirements of a quality cutting tool, for example:
*Made of premium steel, cutting edges stay sharp with no fraying.
*Ergonomic handle design brings a comfortable operation
*Ratcheting mechanism makes large size cable cutting effortless
The second step, stripping, the proper removal of the sheath brings high quality conductive connections. The cable must be stripped to the proper length without damages. Stripping can be super easy and fast when you get a suitable stripper. Our tools are designed to make it easy to get quick and clean stripping for cables of different sizes and materials. There is two basic strippers for your choice:
1. Stripping pliers with multiple stripping holes. Sharp blades and precise design in diameter provide a clean strip without damage to the conductor.
2. Self-adjusting insulation strippers are ideal for cable in different materials. The stripping depth can be adjusted according to cable diameter, and sheath thickness. It reduces the risk of damage to the conductor.
Besides, we manufactured various versatile strippers to help people to get more work done at less cost.
TRUMPF Roofing and Walls
The document provides information about TRUMPF power tools for roofing and facade work. It describes several cutting and shearing tools, including slitting shears that can cut materials up to 2.5mm thick. It also details nibblers that can cut a variety of metal materials and profiles. Technical specifications are provided for each tool, including maximum material thickness, battery life, weight and included accessories. Contact information is given for TRUMPF locations in Switzerland and the UK.
Panduit Stainless Steel Cable Tie & Marking Systems For Cable & Pipe Identifi...
Panduit Stainless Steel Cable Tie & Marking Systems For Cable & Pipe Identifi...Thorne & Derrick International
Panduit stainless steel marking and identification systems provide long-term permanent marking with clear visibility for optimum identification of cables, pipes, conduits and electrical equipment. The Panduit system comprises stainless steel cable ties, cable marker plates and cable tags.
Panduit MEHT187 (pictured) metal embossing hand tool and stainless steel tape system is lightweight, compact and durable for working in harsh, hazardous and high voltage electrical projects.
Webtools RCO40LP Wire Rope Cutters
This document provides specifications for the RCO40LP wire rope cutter, including its cutting capacity of steel wire ropes up to 38mm in diameter with a maximum tensile strength of 1960N/mm2. The cutter is suitable for cutting wire ropes, cables, and umbilicals with a stainless steel body and corrosion resistant materials that provide long life. It also has an open design that allows for easy positioning on cables and can be used at any water depth.
TRUMPF 18V Cordless Tools
TRUMPF continues being a specialist in the metal processing industry for many years. They have combined their experience with the newest technology in their battery-powered cordless tools to help professionals get their work done with perfect results. Their new 18 V battery-powered tools are a perfect addition to their 10.8 V model line and offer the best solution for any need. The 18 V tools feature a robust gear head and brushless motors for longer run times, as well as Li-Ion batteries protected from overheating.
20120429
The document describes a diamond wire saw machine that can be used for demolishing structures like bridges, buildings, and dams. It uses a wire attached with diamond tips that is spun to cut through materials without vibration or noise. The machine comes in two models that are powered by diesel engines or electric motors. It can section steel, concrete, and stone and is suitable for renovations of sensitive interior spaces.
Fiber optic hand tools
Allows easy mid-span access to optical fibers in loose buffer tubes and can access tube sizes from 1.9 mm to 3.0 mm.
Specifications
Shaves precise opening to prevent fiber damage.
Sizing channels to easily determine tube size.
Locking mechanism ensures tool will remain closed through entire shaving operation. Replacement Blade: Part No.: 80935 (5 Blades – 2 screws)
Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm)
Weight: 1.36 oz (38.5g)
Webtools RCO40 Wire Rope Cutters - Data Sheet
This document provides specifications for the RCO40 wire rope cutter. The cutter can cut steel wire ropes up to 38mm in diameter with a maximum tensile strength of 1960N/mm2. It is designed for cutting wire ropes, cables, and umbilicals under heavy working conditions. The cutter has a stainless steel body and alloy steel cylinder that provide corrosion resistance and a long life for the cutting blade and anvil.
TRUMPF C200 Slitting Shear
18V Slitting shear used for multiple industries for cold cutting on building sites and factories. The tool is designed primarily for the Ducting Trade.
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
Raptor Brochure V3 (Compressed)
The new Raptor "ELEMENT" range of magnetic drills features innovative designs and high-quality components, resulting in reliable and powerful drills suited for harsh environments. The drills are compact, lightweight yet powerful, balancing style, ergonomics and precision engineering. Raptor designed the ELEMENT range to be durable, high-performing machines through quality construction and unique performance-enhancing features.
TRUMPF TruTool S350 and S450
The document describes TruTool S 350 and TruTool S 450 sheet metal shears. The shears have height adjustment without tools for different sheet thicknesses, 2-way blade rotation for long tool life, and are extremely user-friendly with a bow-handle and clear view of the work surface. Technical data is provided including maximum sheet thickness, smallest radius, working speed, and weight. Applications include cutting flat sheets, grids, and coil processing.
Similar to Webtools WCS38D Wire Rope Cutters up to 38mm - Data Sheet (20)
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
Webtool HCV270 Cable Umbilical and Riser Cutter - Data Sheet
Prysmian 8YR0-ASC40R Bonded Semi-Conductor Screen Removal Tool - Prysmian Scr...
Prysmian 8YR0-ASC40R Bonded Semi-Conductor Screen Removal Tool - Prysmian Scr...
Prysmian 8YRO-LH Adjustable Insulation Stripping Tools - Prysmian Cable Strip...
Prysmian 8YRO-LH Adjustable Insulation Stripping Tools - Prysmian Cable Strip...
Prysmian 8YRO-NO Insulation Chamfering Tools - Cylinder And Tapered Stripping...
Prysmian 8YRO-NO Insulation Chamfering Tools - Cylinder And Tapered Stripping...
Prysmian 8YR0-LHS Screen Stripping Tool - Prysmian Semi- Conductive Screen Re...
Prysmian 8YR0-LHS Screen Stripping Tool - Prysmian Semi- Conductive Screen Re...
Panduit Stainless Steel Cable Tie & Marking Systems For Cable & Pipe Identifi...
Panduit Stainless Steel Cable Tie & Marking Systems For Cable & Pipe Identifi...
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
CAKE: Sharing Slices of Confidential Data on Blockchain
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
In this blog post, we'll delve into the intersection of AI and app development in Saudi Arabia, focusing on the food delivery sector. We'll explore how AI is revolutionizing the way Saudi consumers order food, how restaurants manage their operations, and how delivery partners navigate the bustling streets of cities like Riyadh, Jeddah, and Dammam. Through real-world case studies, we'll showcase how leading Saudi food delivery apps are leveraging AI to redefine convenience, personalization, and efficiency.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Recently uploaded (20)
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
CAKE: Sharing Slices of Confidential Data on Blockchain
CAKE: Sharing Slices of Confidential Data on Blockchain
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Webtools WCS38D Wire Rope Cutters up to 38mm - Data Sheet
- 1. Cutting capacity – Maximum Ø38mm wire rope of 1770N/mm² grade Can be used at any water depth Suitable for cutting wire rope, cables and umbilicals 700 bar maximum input pressure Approx weight – 14.5kg Standard tool is shown above. Bespoke and custom designs to suit special applications are available on request WCS38D - Wire Rope Cutter Part No - 980487 Heavy duty wire rope cutter designed for use in severe working conditions Closed jaw design Anvil pin can be removed to allow the tool to be positioned on the cable Corrosion resistant stainless steel construction Long blade life ensures that tool maintenance is kept to a minimum Ideal for operation in confined spaces Optional intensifier panel is available North & South American Distributor: Variators Ltd. 61 Advance Rd., Unit 7, Toronto, Ontario, M8Z 2S6 Phone: (416)234-8671 Fax: (416)237-9279 Email: info@webtool-subsea.com Webtool is a Trademark of Allspeeds Ltd Designed and Manufactured in the UK Webtool is a Trademark of Allspeeds Ltd Designed and Manufactured in the UK Tel: +44 (0)191 490 1547 Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk Website: www.cablejoints.co.uk www.thorneanderrick.co.uk