Waste water needs to be treated before discharge into water bodies to reduce pollution. There are three main stages of treatment - primary, secondary, and tertiary. Primary treatment involves physical processes like screening, sedimentation, and flotation to remove solids. Secondary treatment uses biological processes where microorganisms break down organic waste. Common secondary treatments are activated sludge and trickling filters. Tertiary treatment provides additional removal of nutrients or other pollutants through chemical or physical means. Proper waste water treatment is necessary to protect aquatic life in receiving water bodies.
#Treatment and Recycling of Sewage and Sludge
#Composition of Sewage
#Hazardous-Waste Management
#Treatment
#Physical Sewage Treatment or Primary Treatment
#Biological Treatment of Sewage or Secondary Treatment
#Chemical Treatment of Sewage or Tertiary Treatment
#Treatment and Recycling of Sewage and Sludge
#Composition of Sewage
#Hazardous-Waste Management
#Treatment
#Physical Sewage Treatment or Primary Treatment
#Biological Treatment of Sewage or Secondary Treatment
#Chemical Treatment of Sewage or Tertiary Treatment
Water is a precious resource and without it life is not possible on earth
Water is getting polluted day by day due to excessive and careless use so the percent of available drinking water is reducing
There are many ways which causes water pollution and the effects of it are very harmful for all living and non-living objects
In general, sewage contains dissolved solids, suspended solids, nutrients (N, P), sulphate, chloride and heavy metals (Fe, Cu, Co, Zn, Pb, Ni), bacteria and viruses.
This 0.1% contains organic matter, microorganisms and inorganic compounds.
Of the solids present in sewage, 70% are organic and 30% are inorganic in nature.
The organic fraction contains proteins (60%), carbohydrates (20%) and fats (10%).
The inorganic fraction contains grit, salts and metals.
The Sewage Treatment Process essentially includes three stages. What are the three stages of sewage treatment and How does each stage work?
The three stages can be divided into primary, secondary, and Tertiary. In each step, water is purified to the next level to access clean water for humans and the environment.
1.This stage essentially includes the process of sedimentation. The water is held in the large sedimentary or rainwater tanks where the settleable solids are removed. Since the sedimentation tanks work on the principle of gravity, the solids settle at the bottom, and the lighter solids float in the tanks. Anyhow, let's move forward to stage 2 of secondary treatment. After the sludge settles at the bottom, the water is then released for its secondary treatment.
2.In this process, waste is broken down by aerobic bacteria and incorporated into the wastewater system.
3. Tertiary treatment is also known as polishing and disinfecting the water with the highest standards. This stage is critical to producing the water to a particular specification such as technical water, mineral water etc. It is also used to treat the water in public systems.
1.the incoming wastewater passes through screening equipment where objects such as rags, wood fragments, plastics, and grease are removed. The material removed is washed and pressed and disposed of in a landfill. The screened wastewater is then pumped to the next step: grit removal.
2. In this step, heavy but fine material such as sand and gravel is removed from the wastewater. This material is also disposed of in a landfill.
3. The material, which will settle, but at a slower rate than step two, is taken out using large circular tanks called clarifiers. The settled material, called primary sludge, is pumped off the bottom and the wastewater exits the tank from the top. Floating debris such as grease is skimmed off the top and sent with the settled material to digesters.
4. In this step, the wastewater receives most of its treatment. Through biological degradation, the pollutants are consumed by microorganisms and transformed into cell tissue, water, and nitrogen.
5. Large circular tanks called secondary clarifiers
Biological treatment is an important and integral part of any wastewater treatment plant that treats wastewater from either municipality or industry having soluble organic impurities or a mix of the two types of wastewater sources.
The four processes are: (1) Preliminary Treatment (2) Primary Treatment (3) Secondary or Biological Treatment and (4) Tertiary or Advanced Treatment
✓Waste water is a term that is used to describe waste material that includes....
Food scraps
Oil and soaps.
Human wastes.
Industrial wastes.
Sewage waste that is collected from urban areas.
WASTE WATER AND THEIR TREATMENT (PRIMARY, SECONDARY AND TERTIARY)
Municipal sewage treatment systems carry out various steps involved. These steps are primary treatment, secondary (or) biological treatment, and tertiary treatment.
For Environment Protection against harmful emisison and aquatic life, It is necessary to implement the standard in order to control the Chemcial Oxygen demand, Biological oxygen demand, Total suspended solid, Total dissolved solid, Oil & Greece Etc.
A presentation on Potential Technology for Water Treatment by Romeo Afrin Upama, Department of Geography & Environmental Studies, University of Chittagong. The presentation is on the available and potential water treatment technologies.
Online aptitude test management system project report.pdfKamal Acharya
The purpose of on-line aptitude test system is to take online test in an efficient manner and no time wasting for checking the paper. The main objective of on-line aptitude test system is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves lot of time but also gives fast results. For students they give papers according to their convenience and time and there is no need of using extra thing like paper, pen etc. This can be used in educational institutions as well as in corporate world. Can be used anywhere any time as it is a web based application (user Location doesn’t matter). No restriction that examiner has to be present when the candidate takes the test.
Every time when lecturers/professors need to conduct examinations they have to sit down think about the questions and then create a whole new set of questions for each and every exam. In some cases the professor may want to give an open book online exam that is the student can take the exam any time anywhere, but the student might have to answer the questions in a limited time period. The professor may want to change the sequence of questions for every student. The problem that a student has is whenever a date for the exam is declared the student has to take it and there is no way he can take it at some other time. This project will create an interface for the examiner to create and store questions in a repository. It will also create an interface for the student to take examinations at his convenience and the questions and/or exams may be timed. Thereby creating an application which can be used by examiners and examinee’s simultaneously.
Examination System is very useful for Teachers/Professors. As in the teaching profession, you are responsible for writing question papers. In the conventional method, you write the question paper on paper, keep question papers separate from answers and all this information you have to keep in a locker to avoid unauthorized access. Using the Examination System you can create a question paper and everything will be written to a single exam file in encrypted format. You can set the General and Administrator password to avoid unauthorized access to your question paper. Every time you start the examination, the program shuffles all the questions and selects them randomly from the database, which reduces the chances of memorizing the questions.
Water is a precious resource and without it life is not possible on earth
Water is getting polluted day by day due to excessive and careless use so the percent of available drinking water is reducing
There are many ways which causes water pollution and the effects of it are very harmful for all living and non-living objects
In general, sewage contains dissolved solids, suspended solids, nutrients (N, P), sulphate, chloride and heavy metals (Fe, Cu, Co, Zn, Pb, Ni), bacteria and viruses.
This 0.1% contains organic matter, microorganisms and inorganic compounds.
Of the solids present in sewage, 70% are organic and 30% are inorganic in nature.
The organic fraction contains proteins (60%), carbohydrates (20%) and fats (10%).
The inorganic fraction contains grit, salts and metals.
The Sewage Treatment Process essentially includes three stages. What are the three stages of sewage treatment and How does each stage work?
The three stages can be divided into primary, secondary, and Tertiary. In each step, water is purified to the next level to access clean water for humans and the environment.
1.This stage essentially includes the process of sedimentation. The water is held in the large sedimentary or rainwater tanks where the settleable solids are removed. Since the sedimentation tanks work on the principle of gravity, the solids settle at the bottom, and the lighter solids float in the tanks. Anyhow, let's move forward to stage 2 of secondary treatment. After the sludge settles at the bottom, the water is then released for its secondary treatment.
2.In this process, waste is broken down by aerobic bacteria and incorporated into the wastewater system.
3. Tertiary treatment is also known as polishing and disinfecting the water with the highest standards. This stage is critical to producing the water to a particular specification such as technical water, mineral water etc. It is also used to treat the water in public systems.
1.the incoming wastewater passes through screening equipment where objects such as rags, wood fragments, plastics, and grease are removed. The material removed is washed and pressed and disposed of in a landfill. The screened wastewater is then pumped to the next step: grit removal.
2. In this step, heavy but fine material such as sand and gravel is removed from the wastewater. This material is also disposed of in a landfill.
3. The material, which will settle, but at a slower rate than step two, is taken out using large circular tanks called clarifiers. The settled material, called primary sludge, is pumped off the bottom and the wastewater exits the tank from the top. Floating debris such as grease is skimmed off the top and sent with the settled material to digesters.
4. In this step, the wastewater receives most of its treatment. Through biological degradation, the pollutants are consumed by microorganisms and transformed into cell tissue, water, and nitrogen.
5. Large circular tanks called secondary clarifiers
Biological treatment is an important and integral part of any wastewater treatment plant that treats wastewater from either municipality or industry having soluble organic impurities or a mix of the two types of wastewater sources.
The four processes are: (1) Preliminary Treatment (2) Primary Treatment (3) Secondary or Biological Treatment and (4) Tertiary or Advanced Treatment
✓Waste water is a term that is used to describe waste material that includes....
Food scraps
Oil and soaps.
Human wastes.
Industrial wastes.
Sewage waste that is collected from urban areas.
WASTE WATER AND THEIR TREATMENT (PRIMARY, SECONDARY AND TERTIARY)
Municipal sewage treatment systems carry out various steps involved. These steps are primary treatment, secondary (or) biological treatment, and tertiary treatment.
For Environment Protection against harmful emisison and aquatic life, It is necessary to implement the standard in order to control the Chemcial Oxygen demand, Biological oxygen demand, Total suspended solid, Total dissolved solid, Oil & Greece Etc.
A presentation on Potential Technology for Water Treatment by Romeo Afrin Upama, Department of Geography & Environmental Studies, University of Chittagong. The presentation is on the available and potential water treatment technologies.
Online aptitude test management system project report.pdfKamal Acharya
The purpose of on-line aptitude test system is to take online test in an efficient manner and no time wasting for checking the paper. The main objective of on-line aptitude test system is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves lot of time but also gives fast results. For students they give papers according to their convenience and time and there is no need of using extra thing like paper, pen etc. This can be used in educational institutions as well as in corporate world. Can be used anywhere any time as it is a web based application (user Location doesn’t matter). No restriction that examiner has to be present when the candidate takes the test.
Every time when lecturers/professors need to conduct examinations they have to sit down think about the questions and then create a whole new set of questions for each and every exam. In some cases the professor may want to give an open book online exam that is the student can take the exam any time anywhere, but the student might have to answer the questions in a limited time period. The professor may want to change the sequence of questions for every student. The problem that a student has is whenever a date for the exam is declared the student has to take it and there is no way he can take it at some other time. This project will create an interface for the examiner to create and store questions in a repository. It will also create an interface for the student to take examinations at his convenience and the questions and/or exams may be timed. Thereby creating an application which can be used by examiners and examinee’s simultaneously.
Examination System is very useful for Teachers/Professors. As in the teaching profession, you are responsible for writing question papers. In the conventional method, you write the question paper on paper, keep question papers separate from answers and all this information you have to keep in a locker to avoid unauthorized access. Using the Examination System you can create a question paper and everything will be written to a single exam file in encrypted format. You can set the General and Administrator password to avoid unauthorized access to your question paper. Every time you start the examination, the program shuffles all the questions and selects them randomly from the database, which reduces the chances of memorizing the questions.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
1. Waste water Treatment
When effluent discharged into a river body such as lake, river or sea a
number of process occur like physical, chemical and biological
characteristics of water change which cause loss of organism.
The extent of damage depend upon type pf pollutant present in effluent.
Non bio-degradable pollutant like mercury are most deadly as they
accumulate in aquatic organism which lead to Biomagnifications.
Large quantity of biodegradable waste can affect living organism in the
water bodies in which waste are discharged.
are
It is necessary to treat effluent or waste water before discharging in
water body. The treatment procedure are generally divided into three
groups-
1. Primary Treatment or Mechanical Treatment
2. Secondary Treatment or Biological Treatment
3. Tertiary Treatment or Advance Biological or Chemical Treatment
2.
3. Primary Treatment
- In primary treatment suspended solid and floating material is
removed. Effluent is passes through a screen which is used to
remove certain material like wood pieces, plastic , paper,
floating debris. Then effluent is passed through chamber which
is known as grit chamber.
-Fatty and oily substance can be removed by flotation method.
In order to trap fatty and oily substance a instrument called
Centrifugal Separator is used in this process fatty substance
are reached to outside and clean water remain in the center of
cyclone.
- The water is passed in Settling Tank in which water remain
for a long time in which suspended particles are settled down
this process is known as Sedimentation.
4. -Sedimentation can be accelerated by adding chemical
substance known as Coagulant like Alum.
- Some small particles may be separated by Floatation
Method . In this method bubble of air pass through the bottom
of tank and small particles come in the contact with bubble
come out on the surface of water.
- Colloidal particles can be removed by Flocculation and
Precipitation.
5.
6. Primary Tratment
- Physical Treatment
- Chemical Treatment
Physical chemical waste water treatment techniques are
techniques to remove the coarse fraction.
Oil, fatty acids and suspended solids could be removed
by the use of the following techniques:
1. Physical Treatment
a) Screening
b) Grit Chamber
c) Floatation or skimming tank
7. Chemical Treatment
- Sedimentation
- Coagulation
- Flocculation
- Filteration
Physical chemical treatment is normally used
to prepare the waste water for the next
treatment technique, in many cases biological
treatment.
8. Screen Chamber:
Screen chamber remove dead animals, branches of tree, logs
of wood, rags and other coarse floating material.
The effluent is passed through the bar screens for rag
removal. In this section, two automatic bar screen cleaners
remove large solids (rags, plastics, etc.) from the raw sewage.
The collected material is placed in dumpsters to be taken later
to the landfill
9.
10. Grit Tanks:
Grit include sand, ash, egg shell etc . Of diameter less then
0.2 mm.
Next, the effluent moves to the grit tanks. These tanks
reduce the velocity of the effluent so that heavy particles
may fall to the bottom. The solids are pumped to an auger
pump which separates the water from the grit while the
water moves onward. The grit (mostly inorganic solids)
goes to a dumpster which is taken to a landfill. There are
two complete grit removal systems which are rotated in
operation for equal hours.
11.
12. Skimming Tank
Fats, waxes, fatty acid, soap, minerals and vegetable oil
present in waste water are collectively called as oil and
grease. As oil and grease are lighter than water they are
normally separated by natural flotation .
The bubbles of air are passed on the bottom of the tank and
floating matter rises and remain on the surface of waste water
which can be separated easily.
13. Sedimentation
Settling down of suspended particles at the bottom of water is
called Sedimentation. This process is also known as
clarification.
In this process water is collected into big pond , slowly- slowly
impurities are settled down by gravitation. The process of
sedimentation can be accelerated by adding Alum.
The main objective of Sedimentation are :
- The suspended and colloidal impurities are separated in
sedimentation tank by gravitation.
- It reduce heavy sediment load before treating water for
other purposes.
14. -The main principle of sedimentation is to allow water to rest
or flow at a very slow velocity. So that heavier particles settle
down due to gravity.
- The process of settling of particles depend mainly on
velocity of flow, size, shape and specific gravity of particles
and viscosity of liquid.
- The velocity of water decreased by increasing the length of
flow. This principle is used in the process of sedimentation.
- The size and shape of particles are increased by formation
of precipitates because of addition of coagulants.
15. Coagulation
- In plain sedimentation, the heavier particles settle down. However fine
particles take many hours or sometimes days to settle down.
- Colloidal particles which are fine particles of size finer than 0.0001 mm
carry electric charges on them.
- The water possesses colour which is mainly due to colloidal matter and
dissolve organic matter in water.
- The turbidity in water is mainly due to the presence of very fine particles
of clay, silt and organic matter.
- Sedimentation alone is not sufficient o remove all the
suspended matter. The process of coagulation is used to
remove colloidal particles from water.
- Coagulation is the process in which certain chemical agent is mixed with
water then colloidal and suspended particles are agglomerated and form
insoluble metal hydroxide known as flocks.
16. Filtration
- Filtration is done in order to remove colloidal and suspended
matter remaining after sedimentation and to remove bacterial
load.
- The process of filtration usually consist of allowing the water
pass through thick layer of sand or porous material which
retain coarse impurities on its surface and in pores.
- The apparatus used for filtration is called filter and the
porous material that fill the filter is known as filtering medium.
18. -Coagulant is adopted when turbidity of water exceeds about
40 ppm. By coagulation process the fine particles are removed
rapidly and turbidity is reduced to about 20 ppm.
- The most common coagulant are aluminum sulfhate,
chlorinated copper, ferrous sulpahte, lime, magnesium
carbonate, polyelectrolyte and sodium aluminates.
- Aluminum sulphate, (Al2 (SO4)3 . 18 H2O is also known as
alum. It is most common coagulant that is available and used
in the form of flakes.
19. Flocculators
In recent years flocculators or polyelectrolytes have widely
been used. Flocculators are organic high molecular weight
compound comprising many inorganic group.
- These group groups undergo ionisation when dissolve in water.
- - Two important flocculators are polyacryalamide and BA-2
flocculator (cation exchange type).
- - The BA-2 polyelectrolyte is employed without any coagulant
because it bring about coagulation of colloids itself. Most of colloidal
particles carry negative surface charge but molecule of BA-2 are
positively charged . Hence neutralisation of charges take place.
- -
20. The water compounds are classified into three categories :
suspended solids, colloidal particles (less than 1 micron) and
dissolved substances (less than several nanometers).
The coagulation-flocculation processes facilitate the removal of
SS and colloidal particles. It’s used in the final stage of solids-
liquids separation: settling, flotation or filtration.
Coagulation is the destabilization of colloidal particles brought
about by the addition of a chemical reagent called as
coagulant.
21. Flocculation is the agglomeration of destabilized
particles into microfloc and after into bulky
floccules which can be settled called floc. The
addition of another reagent called flocculants or a
flocculants aid may promote the formation of the
floc.
The factors, which can promote the coagulation-
flocculation, are the velocity gradient, the time,
and the pH. The time and the velocity gradient
are important to increase the probability of the
particles to come
22. Secondary Treatment or Biological Treatment
It is the process in which microorganism play a very important
role for the treatment of effluent. Microorganism like bacteria,
fungi decompose the organic waste and convert into simpler
form. The main function of secondary treatment is to convert
the reaming organic matter of sewage into stable form by
oxidation and nitrification.
Biological Treatment Can be classified into
1. Aerobic Treatment
a) Activated Sludge Process
b) Trickling Filter
c)
2. Anaerobic Treatment
23. Aerobic Treatment :
The treatment which is carried out by microorganism in the
presence of oxygen.
Anaerobic Treatment :
The treatment which is carried out by aerobes in the absence
of oxygen. The need of oxygen is supplied by oxidation of
oxygenated compound for e.g SO2
24. Activated Sludge Process
- This is most versatile biological oxidation process employed for the
treatment of waste water contain dissolve solid, collides, coarse solid and
organic matter.
- Sewage from sedimentation tank enter into aeration tank. Here 20 – 30
% of active sludge is mixed. The mixture is aerated and mixed in the tank
for about 4 to 8 hours .
- An efficient aeration for 3 – 6 hour is occupied for sludge while for
industrial waste 6 – 24 hour of aeration is required.
- The microorganism oxidize organic matter , in the presence of abundant
quantity of oxygen in the aeration tank. Sewage is allowed to settle in
secondary sedimentation tank.
- This settled sewage has undergo aeration and has active
microorganism. So some portion of activated sludge is recalculated into
the aeration tank.
25. The activated sludge is obtained by settling sewage in the
presence of excess oxygen. Thus activated sludge is that
sludge which settle down after the sewage has been freely
aerated and agitated for a certain time.
- The activated sludge is biologically active and contain a
large number of aerobic bacteria and other microorganism.
- When activate d sludge is mixed with effluent , the aerobic
bacteria oxidize the organic matter and promote
coagulation and flocculation.
- Some advantages of activated sludge method is
i) The effluent is free from bed smell and odour
ii) Give Clear sparkling treated liquid
29. Trickling Filter
- After primary treatment the effluent is passed through the the
bed the filter medium which is consisting of bed of stone in
which microorganism or bacteria are present.
- Bacteria get nutrient . Bacteria attack on carbohydrate,
protein, oil, fats which is essential for the growth of bacteria.
30.
31.
32. Oxidation Pond (Lagoon)
New bilogical method have been introduced now days for
waste water treatment. The oxygen pond is shallow pond
where waste water is purified by action of algae and
aerobic bacteria.
Organic matter are decomposed by bacteria and are
consumed by algae.
Latter on oxygen is released during the process of
photosynthesis.
Aerobic bacteria get O2 from atmosphere and convert
the organic matter present in sewage and liberate CO2
which is again taken by algae during the process of
photosynthesis.
33.
34. The contents of the aeration tanks, which require a delicate
balance of food and oxygen, are commonly referred to as the
mixed liquor suspended solids (MLSS) or activated sludge.
The activated sludge converts organic substances into
oxidized products and a settleable floc which is settled out in
the secondary clarifiers. The aeration tanks have a great deal
of flexibility built into them. Raw sewage can be introduced in
various locations and be aerated and mixed for varying
lengths of time and intensity.
35. Carbon Cycle - Metabolism Reaction
Bacterial Decomposition of Organic Waster
Metabolism occurs in animals, humans, and in this case
Bacteria, after the ingestion of organic plant or animal
foods. Organic materials contain at least carbon and
hydrogen and may include oxygen. In the cells a series of
complex reactions occurs with oxygen to convert for
example glucose sugar into the products of carbon dioxide
and water and ENERGY. This reaction is also carried out
by bacteria in the decomposition/decay of organic
waste materials in the water.
36.
37. An important summary statement is that during
combustion/metabolism of organic waste, oxygen is
used and carbon dioxide is a product. The whole
purpose of the process is to decompose and
breakdown organic waste into carbon dioxide, a gas
emitted to the atmosphere, and unreacted solids
which may be removed by settling and filtration.
38.
39.
40.
41. Tertiary Treatment (Advance waste water treatment)
The main function of tertiary treatment is to decrease the
load of nitrogen and phosphorous compound present in the
effluent by the following process.
a) Precipitation
b) Nitrogen Stripping
c) Chlorination
a) Precipitation:
The effluent received after the secondary treatment is
mixed with calcium oxide. The lime then react with
phosphorous compound in waste to from insoluble
calcium phosphate, which then settle down a the bottom
of settling tank.
42. b) Nitrogen Stripping
Nitrogen present in waste water is generally in the form of ammonia gas ,
nitrates and nitrites. Ammonia is highly undesirable in streams and lakes
because it is extremely lethal to aquatic biota. Nitrogen eventually enhance
Eutrophication
In order to remove nitrogen air is forced through the effluent which thereby
result in the removal of ammonia gas.
C) Chlorination
It is the process in which chlorine is used to kill micro-organism .The main
purpose of chlorination are
- To assist in the formation of floc in the process of coagulation together
with other chemical.
- To prevent corrosion of sewers.
- To prevent spread of epidemic.
43. Ultraviolet Light
The water is passed through banks of cylindrical,
quartz-jacketed fluorescent bulbs. Some dissolved
materials, such as iron and some organic compounds,
can also absorb some of the light. Ultraviolet
disinfection is becoming more popular because of the
increasing complications associated with the use of
chlorine.
Ozone:
Ozone is too unstable to store, and has to be made as it is
used. It is produced by passing an electrical discharge
through air, which is then bubbled through the water. While
chlorine can be dosed at a high enough concentration so
that some of it remains in the water for a considerable time,
ozone is consumed very rapidly and leaves no residual. It
may also produce some chemical byproducts, but probably
not as harmful as those produced by chlorine.
44.
45.
46. Sludge/Solids Treatment
1. Anaerobic digesters.
In the anaerobic digesters another group of bacteria
begin to digest and dissolve the solids to their basic
components. This process uses bacteria which do not
need atmospheric oxygen to survive, so therefore, no
air is bubbled into the tanks. In fact, air mixed with the
gasses may be explosive, so we strive to keep all air
out. The anaerobic digesters produce a stable sludge
which is readily dewatered. The process is also a
source of methane gas, which is used as a fuel
source for heating the digesters, heating several
buildings, and fueling the engine generator to
produce electricity.
47.
48. Sludge Dewatering and Drying:
The engine generator runs on digester or natural gas. The generator
supplies electrical power to essential pieces of treatment plant
equipment. In the event of a complete power outage, important
equipment will be powered by the engine generator. Waste heat is used
to help heat surrounding buildings.
After most of the organic solids have been digested, the sludge is
pumped to sand drying beds or to the belt filter presses. The belt filter
presses use a chemical flocculent to separate the water from the solids.
The dewatered solids are then squeezed between two belts to further
dewater them. The resulting solids are in the range of 18-20 percent
solids. These solids are applied to agricultural land. The solids can also
be taken to a landfill. The sludge drying beds also provide a means of
drying the sludge treated by the anaerobic digesters. As an alternative,
the digested sludge may be pumped to the truck loading station to be
hauled to other locations for drying or for use as fertilizer. Sludge is a
good soil conditioner as well as fertilizer.