This document provides an overview of various Internet of Things (IoT) equipment that can be used for building automation, including their functionality and applications. It describes smart plugs, temperature and air quality sensors, actuators, lights, locks, cameras, occupancy sensors, multi-sensors, and GPS trackers. Protocols for data exchange and examples of exploiting specific equipment for building monitoring and control are also mentioned.
Commercial and industry fire security system wireless alarm. Professional security easy installing fire alarm system wireless RF 470MHz reliable fire alarm system security equipment.
Safety is a crucial consideration in design of residential and commercial buildings in order to
safeguard against loss of life and damage to property. Fire is a key element in safety
considerations.
This project therefore seeks to design a arduino based smoke detector fan that will continuously
monitor the presence of significant amount of smoke and activate a fan to draw out a smoke to
contain the situation.
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSMSaikiran Perfect
The idea behind this project is to use the existing GSM infrastructure. So, all the operations involve the GSM system also. As we send any SMS, it goes through the GSM system. Any sent SMS can be received if we use a SIM card and GSM module. To operate any GSM modem, we have to use the AT commands to operate them. For example, if any SMS arrives the GSM modem sends the serial data in ASCII format. We can read these data if we connect the modem with the serial port of the microcontroller at the baud rate of 9600. As the microcontroller comes to know that a SMS has been arrived, it can sent a proper AT command to read the SMS. The reading of SMS returns the mobile number of sender, the time and much more information. We have to select the SMS part of the message. The starting string of the SMS is used as the password. As the password is matched, then the SMS arrival is assumed to be valid by the microcontroller otherwise, it ignores the SMS. Working of “FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM” is very simple.
Commercial and industry fire security system wireless alarm. Professional security easy installing fire alarm system wireless RF 470MHz reliable fire alarm system security equipment.
Safety is a crucial consideration in design of residential and commercial buildings in order to
safeguard against loss of life and damage to property. Fire is a key element in safety
considerations.
This project therefore seeks to design a arduino based smoke detector fan that will continuously
monitor the presence of significant amount of smoke and activate a fan to draw out a smoke to
contain the situation.
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSMSaikiran Perfect
The idea behind this project is to use the existing GSM infrastructure. So, all the operations involve the GSM system also. As we send any SMS, it goes through the GSM system. Any sent SMS can be received if we use a SIM card and GSM module. To operate any GSM modem, we have to use the AT commands to operate them. For example, if any SMS arrives the GSM modem sends the serial data in ASCII format. We can read these data if we connect the modem with the serial port of the microcontroller at the baud rate of 9600. As the microcontroller comes to know that a SMS has been arrived, it can sent a proper AT command to read the SMS. The reading of SMS returns the mobile number of sender, the time and much more information. We have to select the SMS part of the message. The starting string of the SMS is used as the password. As the password is matched, then the SMS arrival is assumed to be valid by the microcontroller otherwise, it ignores the SMS. Working of “FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM” is very simple.
This project uses a temperature sensor to detect the occurrence of a fire and in that case uses a GSM module to send a text alert to the user's phone number.
A "Tracking Temperature Without a Hassle" device.
The G7 Wireless Sensor provides a easier and more convenient way of tracking the temperature to the most delicate industries such as pharmacy automation, tank and cold storage,
manufacturing and industrial, data centres as well as the agriculture and farming industry.
AN INTEGRATED SOLUTION FOR BOTH MONITORING AND CONTROLLING FOR AUTOMIZATION...IJNSA Journal
Temperature monitoring plays a major role in controlling it according to its varied conditions. This
process is common in all critical areas like data centre, server rooms, grid rooms and other data
communication equipped rooms. This is mandatory for each organization/industry to impart such
process, as most of the critical data would be in data centre along with their network infrastructure which
having various electronic, electrical and mechanical devices are involved for data transmissions. These
devices are very much depend on the environmental factors such as temperature, moisture, humidity etc.,
and also emit heat in the form of thermal energy when they are in functional. To overcome these heats,
the server/data centre room(s) would be engaged with multiple (distributed) air-conditioning (ac) systems
to provide cooling environment and maintain the temperature level of the room. The proposed paper is
the study of automization of monitoring and controlling temperature as per desired requirements with
wsn network
International Journal of Engineering and Science Invention (IJESI)inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online
A Building Management System (BMS) is a computer-based control system installed in buildings that controls and monitors the building’s mechanical and electrical equipment such as ventilation, lighting, power systems, fire systems, and security systems
To study the working principle of gas and smoke detector system
To design and construct of the gas and smoke detector system and control system using Arduino with Bluetooth module
To implement gas and smoke design in the project
At the very first time of smoke creation so that avoided the unwanted accident
Temperature Humidity Data Logger is a highly versatile and precise engineered tool designed to record and monitor temperature and humidity levels in various
environments. With its four channels (-40℃ to 80℃/-40℉ to 158℉) wide temperature range, it can provide accurate results anywhere in a short period of time
This project uses a temperature sensor to detect the occurrence of a fire and in that case uses a GSM module to send a text alert to the user's phone number.
A "Tracking Temperature Without a Hassle" device.
The G7 Wireless Sensor provides a easier and more convenient way of tracking the temperature to the most delicate industries such as pharmacy automation, tank and cold storage,
manufacturing and industrial, data centres as well as the agriculture and farming industry.
AN INTEGRATED SOLUTION FOR BOTH MONITORING AND CONTROLLING FOR AUTOMIZATION...IJNSA Journal
Temperature monitoring plays a major role in controlling it according to its varied conditions. This
process is common in all critical areas like data centre, server rooms, grid rooms and other data
communication equipped rooms. This is mandatory for each organization/industry to impart such
process, as most of the critical data would be in data centre along with their network infrastructure which
having various electronic, electrical and mechanical devices are involved for data transmissions. These
devices are very much depend on the environmental factors such as temperature, moisture, humidity etc.,
and also emit heat in the form of thermal energy when they are in functional. To overcome these heats,
the server/data centre room(s) would be engaged with multiple (distributed) air-conditioning (ac) systems
to provide cooling environment and maintain the temperature level of the room. The proposed paper is
the study of automization of monitoring and controlling temperature as per desired requirements with
wsn network
International Journal of Engineering and Science Invention (IJESI)inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online
A Building Management System (BMS) is a computer-based control system installed in buildings that controls and monitors the building’s mechanical and electrical equipment such as ventilation, lighting, power systems, fire systems, and security systems
To study the working principle of gas and smoke detector system
To design and construct of the gas and smoke detector system and control system using Arduino with Bluetooth module
To implement gas and smoke design in the project
At the very first time of smoke creation so that avoided the unwanted accident
Temperature Humidity Data Logger is a highly versatile and precise engineered tool designed to record and monitor temperature and humidity levels in various
environments. With its four channels (-40℃ to 80℃/-40℉ to 158℉) wide temperature range, it can provide accurate results anywhere in a short period of time
Q8 Face Recognition & Face Temperature Integrated Detector - Contact-less Tem...AshwiniS72
The Q8 Face Recognition & Face Temperature Integrated Detector is based on face recognition algorithm and infrared thermal imaging temperature measurement algorithm.
It is equipped with binocular real-time security, temperature display, high temperature alarm and other functions. It can be used in multiple scenarios to regularly monitor temperature
of people gathering in large number like railway station, subway, malls, hospitals, supermarkets etc. This is indeed one of the best system to use post the coronavirus pandemic to be used in workplaces and other organisations. The face recognition using the international leading face recognition algorithm technology for face detection supports storage of more than 10000 faces.
The system also raises an alarm automatically when there is a temperature detection higher than the normal. It supports wall mounting, gate hanger mounting and pole hanger mounting in various scenarios. It is easy to install and comes with 1-year warranty.
Sensors are at the core of every modern invention.
In these couple of slides I describe a couple of them and how they are connected to microcontroller pins.
This is introductory information for SOLUON, xenixstudio's IoT Building management service for environment monitoring and control. This service is applicable not only to buildings, but also to properties like farm, factory and camping sites. This service offers long-range wireless IoT environment monitoring and control service where cable construction or paid wireless services are needed with free communication fee. Various external modules on the document can be expanded.
Real estate management is serviced in cooperation with the best asset management firm GENSTAR korea.
International Journal of Engineering and Science Invention (IJESI) inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online
This presentation is about the security which is the utmost priority and need now. The perimeter security covers our surroundings and keep us safe from the vulnerabilities and mishap to be happen. We have described the security systems in detail.
Industrial monitoring and control systems using andriod applicationAvinash Vemula
Automation takes the complete control of total plants few authentication and manual actions are needed from user side for completing action .Hence there is a must situation for users presence at all times in the control for taking some timely needed control actions. The proposed system provides a good solution to this problem. The whole control room environment is additionally implemented in the arm-android platform and the same is communicated to the process through Bluetooth. Now the user in control can use mobile at anytime, anywhere to monitor and control the whole plant.8051 is used here for acquiring process control parameters from the sensors like temperature, gas etc and transmitting it via a Bluetooth module to an android device. Hence the parameter values can be monitored and stored simultaneously.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
1. ECVET Training for Operatorsof IoT-enabledSmart Buildings (VET4SBO)
2018-1-RS01-KA202-000411
Level 2
Module 1: Selection of IoT equipment for optimal
energy efficient building automation
Unit 1.1: Introduction to IoT equipment, linked to
indicative applications
2. Outline
1. Presentation of IoT equipment, their main functionality and
their link to building automationapplications
2. Data exchange/communication protocolsin the IoT market
3. Exploitation of certain IoT equipment in building monitoring
and control
3. Outline
1. Presentation of IoT equipment, their functionality and their
link to building automationapplications
2. Data exchange/communication protocolsin the IoT market
3. Exploitation of certain IoT equipment in building monitoring
and control
4. Smart plugs for energy consumption monitoring
Wemo mini smart plug
iHome smart plug
5. Smart plugs for energy consumption monitoring
Low-power, long range, wireless sensor that can accuratelymonitorand control
appliances
Switch appliances on and off
Monitor energyof appliances
LoRaWAN compliant
QR code for easy identification
Use cases:
• Know when an appliance power is off
• Know when the power is back
• Switch off the power
• Know the consumption ofan appliance
Appliance Control at 100 – 240 V AC, 50 – 60 Hz, 16 A, switch appliances up to 3500 W Plugio control and monitoringof appliances
6. Smart plugs for energy consumption monitoring
Monitor consumptionfrom residential
electric meters, pulse meters and electrical
appliances
NKE TIC Sensor
Skysense Optical Power
Meter Reader
7. Temperature and air quality monitoring
iDevices Thermostat Apple HomeKit
Ecobee Smart Thermostat with voice control
8. Temperature and air quality monitoring
Ecobee smart sensor of
temperature and occupancy
Eve indoorair quality
monitoringGlobalSatsmoke and heat detector
9. Temperature and air quality monitoring
Air Indoor Temperature sensor over LoRaWAN™ , integrated
with TagoIO - https://tago.io/
Low-power, long range, wireless sensor, with 0.25°C accuracy
in temperature monitoring
LoRaWAN compliant
Easy mounting (screws / adhesive)
Two modes: Reporting and Immediate Alert Mode
QR code for easy identification
AlloraCelsius Air Indoor
10. Temperature and air quality monitoring
Low-power, long range, wireless sensor, with 0.25°Caccuracy in
temperature monitoring
Can be used in freezers, fridges, and outdoor
LoRaWAN compliant
Easymounting (screws / adhesive)
Two modes: Reporting and Immediate Alert Mode
QR code for easy identification
Integrate with any LoRa Network Operator and any third party
application
Celsius Air Industrial
11. Temperature and air quality monitoring
Low-power, long range, wireless sensor
Can be used in homes,offices, commercial buildings,etc.
LoRaWAN compliant
Easymounting(screws / adhesive)
Two modes: Reportingand Immediate Alert Mode
QR code foreasy identification
Temperature monitoringat 0.3 °C accuracy,0.01 °C resolution and -40°C up to +85 °C
range
Humiditymonitoringat 2 % RH accuracy, 0.04 % RH resolutionand 0 up to 100 % RH range Humidity Indoor
12. Temperature and air quality monitoring
Operation temperature range -20 °C to
+70 °C
OneSense Pulse and Temperature
13. Temperature and air quality monitoring
Designed to measure Carbon Dioxide (CO2), Temperature
and Humidity
LoRaWAN™ compliant
High receiver sensitivity, long range solution
Integrated with calibrated CO2 sensor
• Accuracy: ±50 ppm, ±3% of reading
• Range: 0 ~ 10,000 ppm
Integrated with compensated Temp/RH sensor
• Wide range DC power-in, 8~24V/ or Micro-USB DC
power-in, 5V
Display CO2 concentration, Temp/RH
Alarm LED indicator GlobalSatCO2, Temperature & Humidity
Detector
14. Temperature and air quality monitoring
Designed to measure Carbon Monoxide (CO), Temperature and Humidity
Can be used to monitorairqualityin basement parking,garage, Gas ranges/ ovens and
Furnaces,etc.
LoRaWAN™compliant
High receiver sensitivityand longrange solution
Integrated with calibrated COsensor
• Accuracy: ± 5% or ±30ppm
• Range: 0 ~ 500ppm
Integrated with compensatedTemp/RHsensor
• Wide range DC power-in,8~24V/ or Micro-USB DC power-in,5V
DisplayCO concentration,Temp/RH
Alarm LED indicator
GlobalSatCO,Temperature &
Humidity Detector
15. Temperature and air quality monitoring
Designed to measure Particle, Temperature and Humidity
Can be used to detect the dust in the air, like airpurifier, airconditioner and air
monitor
LoRaWAN™compliant
High receiver sensitivityand longrange solution
Integrated with calibrated Dust Particles sensor
• Accuracy: 0.5 μg/m3
• Range: 0-500 μg/m3
Integrated with CompensatedTemp/RHsensor
• Wide range DC power-in,8~12V/ or Micro-USB DC power-in,5V
DisplayPM2.5 concentration,Temp/RH
Alarm LED indicator
GlobalSatPM2.5, Temperature &
Humidity Detector
16. Temperature and air quality monitoring
Integrates a LoRaWAN® communication system
Equipped with a wide range of sensors and offers reliable
weather data under the most demanding circumstances
and gives these variables:
• Inside and Outside Temperature and Relative Humidity
• Barometric Pressure
• Rainfall
• Dew Point
• Wind Speed and Direction sensors (detachable)
• Solar radiation
• PM1, PM2.5, PM10 mcf88 LoRaWAN® Weather Station
17. Temperature and air quality monitoring
Netvox R0701
• Wireless CO Sensor over LoRaWAN™
• Integrated with TagoIO
• RA0701 is mainly used in the detection of automobile exhaust
Netvox R72624
• Wireless Outdoor Noise/Temperature/Humidity Sensor with solar
panel over LoRaWAN™
• Integrated with TagoIO
18. Temperature and air quality monitoring
Ideetron Indoor Temperatureand Humidity Sensor
Used in a variety of industrialrefrigeration/freezer
applications
Laird Sentrius External Temperature/HumiditySensor with BLE
Measures temperature via the cabled sensor
19. Temperature and air quality monitoring
Netvox Indoor PM2.5, Temperature, Humidity
Sensor
Controls the concentrationof suspended particles
to improve air quality
Tracknet IndoorHealthy Home Sensor
Measures CO2, VOC, temperature and
humiditylevels
GlobalSatIndoor Smoke and Heat
Detector
Saves lives and reduces environmental
risks with early fire and smoke
detection, LoRaWAN compliant
20. Temperature and air quality monitoring
Adeunis Smart BuildingCOMFORT
Measures temperature, humidity
Alert button
Clickey TempSense Pro
Automatic temperaturemonitor. Ideal for use in professional
temperature-critical situations
MCF88 Indoor EnvironmentalSensor
Measures temperature, humidity, pressure,
light and air quality
21. Temperature and air quality monitoring
• Decentlab Indoor/Outdoor CO2,
Temperature, Humidity, Barometric
Pressure Sensor
• Accurate tracking of weather, air quality,
and environmental conditions
• Up to 10km coverage
22. Temperature and air quality monitoring
• Ineo-Sense Indoor Temperature,
Light, Ambient Noise Sensor
• Manage ambient temperature,
light and noise
• Capable of communicating in
Clover-Net
23. Temperature and air quality monitoring
• Polysense temperature, humidity, air
pressure and H2S smart node
• Can be used in industrial conditions
for safety
24. Actuators for air and heat control
AirPatrol SmartHeat Starter Pack
Controls up to 10 rooms individually for ideal
temperature in every room
Gives full overview and control via smartphone or web
app
Fits any water based underfloor heating
25. Actuators for air and heat control
Cielo Smart Wi-Fi controller.
Works with all types of air conditioners that have a remote
control (Window AC, Mini Splits, Portable AC)
LeOne is an A/C cloud sensor operator
android app
Can turn air conditioning on/off
It contains humidity and temperature
sensors controller, which allows you to
adjust your A/C at anytime and
anywhere
Highly compatible database to match
160+ different A/C manufactures
28. Smart lights
Netvox R311G Wireless Dimming Light
Sensor over LoRaWAN™
• Integrated with TagoIO
• Has a built-in photosensitive sensor
and it is used for the detection of
ambient light intensity
• Reports the light level in fixed periods
• Reduces energy consumptionin
buildings
29. Smart lock, door and window
Yale assure lock
Netvox door and
window sensor August smart lock pro
30. Smart lock, door and window
Netvox Indoor Door and Window Sensor
Efficiently monitorsopened and closed
doors and windows
Wireless and low power
NetOp Magnetic Door Sensor
Monitorsstatusof opened/closedwindows, doors, cabinets,
etc.
31. Smart lock, door and window
Netvox 2-Gang Reed Switch Open/Close Detection Sensor
Monitorsthe statusof 2 windows and/ordoors at a time
Magneticallyattachedto metal surfaces
NetvoxR311A wireless window sensor over
LoRaWAN™
Integrated with TagoIO
Sends an alarm message to the control centre
when a window is opened
33. Motion, occupancy monitoring
Low-power, long range, wireless sensor
Can monitor occupancy at any space
LoRaWAN compliant
Easy mounting (screws /adhesive)
Two modes: Reporting and Immediate Alert Mode
QR code for easy identification
Use cases:
• Gain insight in how meeting rooms or office desks areused and optimize the
efficiency of office space
• Know how many times toilets areused and clean them when necessary Reduce
your cost, but keep people happy with clean toilets
• Know how long customers stay insidea dressing roomor in frontof a mirror
Accurateoccupancy monitoring at up to 5m distance, 94°x 82°range, 64 zones, 30
seconds time-out
PIRIO occupancy sensor
34. Motion, occupancy monitoring
Tracknet Indoor PIR MotionSensor.
Track occupancy or motion inside homes and
buildings
Improves security and efficiency
Dingtek Outdoor Waste Bin Detector
Determine whether waste binsare full or empty
for improved maintenanceefficiency
35. Motion, occupancy monitoring
Ineo-Sense ACS-Switch Accelero
Detects door movement
Ideal for doors, gates, roofs, windows, safes,
etc.
Parametric Radar People Counter
Directionallycountshumansand moving objects
Wide range 24VDC or USB 5V power input
36. Multi-sensor
Low-power, long range, wireless sensor
LoRaWAN compliant
Easymounting(screws / adhesive)
Two modes: Reportingand Immediate Alert Mode
QR code foreasy identification
Accurate occupancymonitoring,up to 5m distance, 94° x 82° range, 30 seconds time-out
Temperature monitoringat 0.3 °C accuracy,0.01 °C resolution, -40°C up to +85 °C range
Humiditymonitoringat 2 % RH accuracy, 0.04 % RH resolution,0 up to 100 % RH range
PIRIO+ occupancy, temperature and
humiditymonitoring
37. Multi-sensor
BeWhere B1-MIOT-NA
• GPS device with humidity, temperature, pressure,light and impact sensors
over NB-IoT network
• Integrated with TagoIO
• Very low power, ensuring a long battery life to track, monitor and manage
a wide variety of mobile and fixed assets in different environmental
conditions
• Capture various sensor data (temperature,humidity, barometric pressure,
motion, impact, etc.), while optimizing battery use
38. Multi-sensor
DecentLab sensor for CO2, Temperature,Humidity, Barometric Pressure using
LoRaWAN™ technology
• Integrated with TagoIO
• CO2 Range: 0 to 10 000 ppm, Accuracy: ±50 ppm, ±3 % of reading
• TemperatureRange: -40 to +125°C, Accuracy: ± 0.3°C
• Humidity Range: 0 - 100%, RH Accuracy: ±2%
• RH Barometric pressure Range: 300 ... 1100 hPa, Accuracy: ~ ±1 hPa
(absolute), ± 0.12 hPa (typical) equivalent to ±1 m
• Operating conditions: -30°C to 60°C , 100% RH
39. Multi-sensor
Elsys Indoor Desk Sensor
Manage workplace occupancy, temperature,
humidityand light levels
Netvox Indoor Motion,Light, Temperature Sensor
Detects the movement of people, animalsor other objects
40 degrees mechanicalrotation
40. Multi-sensor
Sens’it 3.0 with thermometer, hygrometer, light meter, accelerometer,
magnetometer, reed switch and button
Integrated with TagoIO
Able to communicate on the Sigfox network (RC1, RC2, RC3,
or RC4)
• Thermometer (HTS221) Measuring range -40 to 120°C / Accuracy ± 0.5°C
• Humidity (HTS221) Measuring range 0 to 100 / Accuracy ± 3.5% rH (20 to
+80% rH)
• Accelerometer (FXOS8700) Measuring range ±2, 4, 8 g / Accuracy 0.244, 0.488,
0.976 mg
• Magnetometer (FXOS8700) Measuring range ±1200 ?T / Sensitivity 0.1 ?T/LSB
• Light (LTR329) Measuring range 0.01 to 64K lux
• Reed switch (ILS CT10-1540-G4) Operating range 10-40 AT
Sigfox Sens'it v3
41. Multi-sensor
Sens’it 2.0 temperature, humidity, light, door opening, vibration and
magnet monitoring over Sigfox
Integrated with TagoIO
Measures data and sends it to web and mobile applications
Configuration modes:
• Temperature and Humidity mode
• Light mode
• Door opening detection
• Vibrationdetection
• Magnet
• Button
Sigfox Sens'it v2
42. Multi-sensor
Adeunis Smart BuildingMOTION
Optimizes comfort & energy consumption.Functions:
presence, luminosity, alert button,etc.
Clickey Comfort Sensor
Measures temperature, human presence and interaction,light,
sound, CO2 and battery levels. LoRaWAN compatible
Elsys IndoorERS Sound
Measures temperature, humidity, light, sound
level and motion
43. Multi-sensor
Comtac Indoor Temperature,Humidity, Brightness,
GPS Tracking, Accelerometer, MagnetometerSensor
Two push buttons and two status LEDs
Up to 10km coverage
Ztrack_Pro LoRaWAN GPS Tracker
Built-in temperature sensor and accelerometer to
detect motion
Used to track pets, humans, etc.
AEOTEC Multisensor 6
Motion,Temperature, Humidity, Lights, Vibration,
UV
44. GPS trackers, smart health
Dragino LGT-92 GPS Tracker with 9-axis accelerometer and
attitude detection over LoRaWAN™
Integrated with TagoIO
Gets user’s location info via GPS and sends it to IoT server via
LoRaWAN wireless network
Low power consumption, longer life
45. GPS trackers, smart health
GlobalSat Multi-purpose IoT GPS Tracker Watch for Health Care
Use cases:
• Track daily activity
– Step/Calories/Distance monitor, Heart rate information, Skin temperature
• Monitoring with alert features
– Outdoor geo-fence, SOS for cloud platform management
• Application use
– Health Care, TeamManagement, Group Tracking
• Application field
– Elder safety, Outdoor safety, School safety, Lone worker safety
Small groups can keep contact with each other easier in a wide range of active
areas based on GPS satellite positioning and LoRa®'s long-distance
transmission technology (Up to 10+ KM) to integrate the mobile app and cloud
application
46. GPS trackers, smart health
LT-501R is a RF Network tracker specifically designed for both indoorand
outdoormonitoring on objects
Compatiblewith LoRaWAN™
Outdoor/ Indoor geo-location
Long-distance transmission
Built- in 3 axis accelerometer for motion detector
Built-in BLE for beacon (Indoor positioning)
Supports buzzer for alert
Built-in watchdog
47. GPS trackers, smart health
Pulse counter (indoor)
Smart metering (electricity, heat, gas,
water)
Alarm function
Sigfox connectivity
48. Interaction with humans (push button, voice
commands, etc.)
Low-power, long range, wireless push sensor
LED feedback
LoRaWAN compliant
QR code for easy identification
Use cases:
• Add a buttonon a coffee machine and know when the machine is
out of coffee
• Add a buttonon a copier and know when it’sout of paper
• Add a buttoninside a dressing room and know when your
customers need help
• Add a buttoninside toilets and get feedback on the cleanlinessof
the toilets PUSH, simple button
49. Interaction with humans (push button, voice
commands, etc.)
Agora Indoor Opinion Satisfaction
Terminal
Measures and improves employee
and client satisfaction in real-time
Wireless operation
50. Interaction with humans (push button, voice
commands, etc.)
Works with other Apple products such
as the iPhone and Mac
Collaborates with Apple Music to
enable intelligent interaction with
music at home
Apple Inc. HomePod smart speaker
51. Interaction with humans (push button, voice
commands, etc.)
The device enables users to speak voice commands to interact with services through Google
Assistant, which is the virtual assistant of Google
It can integrate both in-house and third-party services, including
• listening to music
• controlling playback of videos or photos
• receiving news updates entirely by voice
• letting users control smart home appliances with their voice
• offering proactive updates ahead of scheduled events
• visual responses on mobile devices or Chromecast-enabled televisions
• Bluetooth audio streaming
• ability to add reminders and calendar appointments
Multiple speakers can be placed in different rooms in a home for synchronised playback of music
Multi-user support, distinguishing between up to six people by voice
In October 2018, Google also released the Google Home Hub, a smart speaker with a 7-inch
touchscreen video display
In May 2019 Google announced the Google Nest Hub Max, which will feature a 10-inch display
and video camera
Google Home smart speakers
52. Interaction with humans (push button, voice
commands, etc.)
Echo devices connect to the voice-controlled intelligent personalassistant service Alexa,which
responds to the names "Alexa","Echo"or "Computer"
Includes:
voice interaction,musicplayback,making to-do lists,settingalarms,streaming podcasts,
playingaudiobooks,providingweather,trafficand other real-time information,controlling
several smart devices, acting as a home automation hub (e.g.thermostats,humidifiers,
lightbulbs,plugs,dogand cat feeder, doorlocks, cameras,security systems,speakers,Wi-Fi,
televisions,vacuums,microwaves,printers,etc.)
Alexa can be used to activate and deactivate smart home appliances,as well as change their
settings dependingon the device
For example, Alexa can be used to change the temperature in a house through a thermostat,turn
off the lights with smart lights,put out dog or cat food via a smart pet feeder, and activate the
security systems via a smart securitysystem
Amazon Echo can hold multiple profiles.Switchingbetween the profiles can allowusers to play
theirmusic, access theircalendars,and use theiraccounts for shopping
Amazon Echo ("Alexa") smart speakers
53. Water flow and leaks monitoring
Based On LoRaWAN™ Protocol (Class A)
Performs Leak Detection And Alarm
Function
When detecting a leak, the device sends
an alarm message to the gateway
When no leak, it sends a message
reporting the status
Netvox R311W -Wireless Water Leak Sensor
54. Water flow and leaks monitoring
FIBARO Flood Sensor (Apple HomeKit
Enabled)
Eve smart water controller
55. Water flow and leaks monitoring
Smart sprinklers and irrigation controller
Can be used in home lawn and garden care
to reduce water consumption
Instead of fixed timers, it uses data from
sensors, weather forecasts and plant-care
databases to determine watering needs and
deliver enough moisture at the right time Rachio 3 Smart Sprinkler Controller - 8-Zone
56. Water flow and leaks monitoring
China Ultrasound Water Meter DN25
Accurately measure householdwater
consumptionNetvox Indoor Water Leak Sensor
Identifies and respondsto water leaks fast
and can monitortwo spots simultaneously
China Ultrasound Water Meter with Valve
DN20
Measures and controlshousehold water
consumption
57. Water system actuators
Strega indoor smart valveactuatorDN 15
Designed to shut off any wateror fluidsin case of leakage
detection
58. Vibration sensing
Netvox R718DA
• Wireless vibration sensor
• Integrated with TagoIO
• Equipped with an external rolling ball type vibration sensor
• When the vibration sensor moves or vibrates, R718DA can
detect vibration or moving signals and send an alert to the
data centre through LoRaWAN™
• Fully compatible with LoRaWAN™ protocol (Class A)
59. IoT Gateways and wrappers
Gemtek Indoor Ethernet Gateway
Access Point/Gatewaydesigned for wide area smart
grid applicationsand covering blindspots
Tektelic KONA IndoorMicro CellularGatewaywith Battery
Backup – EU (Twilio)
For enterprise and lightweight industrialapplications
Built-in 4-hour battery backup
60. IoT Gateways and wrappers
Aaeon Intel-Based Ethernet Gateway
LoRa certified gatewaywith x86 CPU Intel
Atom Quad Core
Up to 15KM coverageEasylinkinLoRun Indoor CellularGateway
Compact and portablewith low power
consumption
Up to 15KM coverage
ManthinkIndoorEthernet
Gatewaywith GPS antenna
Industrialgrade, equipped with
SX 1301 chip
61. Parking sensors
Turbo Outdoor Parking Sensor
Determine if a parking space is occupied and locate
vehicles
Surface-mount outdoors
62. IoT Kits
The Arduino Ethernet is a microcontroller board based on the
ATmega328, with 14 digital input/output pins, 6 analog
inputs, a 16 MHz crystal oscillator, a RJ45 connection, a
power jack, an ICSP header, and a reset button
The Ethernet differs from other boards in that it does not
have an onboard USB-to-serial driver chip, but has a Wiznet
Ethernet interface. This is the same interface found on the
Ethernet shield
An onboard microSD card reader, which can be used to store
files for serving over the network, is accessible through the
SD Library. Pin 10 is reserved for the Wiznet interface, SS for
the SD card is on Pin 4
It can be used to connect several IoT devices and build own
projects to solve real problems or for education and
prototyping
Arduino
63. IoT Kits
Bosch XDK110
• Cross-DomainDevelopment Kit with Accelerometer, Gyroscope, Magnetic field strength, Light,
Pressure, Humidity, Temperature
• Kit allows for rapid prototyping of sensor-based products and applications for the Internet of Things
(IoT)
• Offers the freedom of programming at a basic or advanced level
• It is an integrated product inclusive of multiple Micro-Electromechanical Systems (MEMS) sensors,
supported by the XDK developer community
• On board sensors:
– Accelerometer ±2 … ±16g (programmable)
– Gyroscope ±125º/s … ±2000º/s (programmable)
– Magnetic field strength ±1300T (X,Y-Axis); ±2500T (Z-Axis)
– Light sensor 0.045-188,000 lux; 22-bit
– Temperature -20ºC to 60°C
– Pressure 300-1100hPa
– Humidity 10-90%rH (non-condensing)
64. IoT Kits
xE310 family of boards, which supports
massive IoT deployments:
• 94-pad fixed LGA footprint
• Module sizes ranging from 300 down to
below 200 mm2
• Combination products include cellular,
GNSS and other wireless technologies
• 3GPP Rel 14 LTE Cat M1 & NB2 ready for
5G
• LGA engineered for superior yield in
massive-scale manufacturing
65. IoT Kits
The xE866 family of Telit boards, supports device designs that demand the small footprint across a variety of
applicationsincludingwearables, telematics and healthcare
Integrationfor products which demand low power
• Nested 15x25 mm LGA footprint
• 4G LTE, Wi-Fi, 3G, LoRa and 2G series
• Mass-productionautomatedmanufacturing friendly
• Over-the-Air firmware update and device management
• Easy to bundle with GNSS modules for positioningand timing dependent applications
66. IoT Kits
Evvos OneSense is a cost-effective, battery-powered wireless data acquisition product line
Features advanced interface circuitries, which allow connecting up to 3 sensors/probes to a
single OneSense device
Collected sensor data is transmitted wirelessly through the Sigfox LPWA network to Sigfox
cloud integration services platform for further processing
Typical Applications
• Industrial Monitoring
• Building Automation
• Agriculture
67. IoT Kits
PHOEBE Custom IoT Board
Enables sensors to connect with the PHOEBE
platform through Wi-Fi protocol
Example custom sensor measuring temperature
and humidity
Typicalapplicationsin Water DistributionSystem
monitoring and control and smart buildings.
More detailsat:
www.phoebeinnovations.com
http://phoebeinnovations.com/phoebeiot
http://phoebeinnovations.com/domognostics
www.domognostics.eu
www.wateranalytics.eu
68. Integrated solutions
It is an IoT solution powered by Intel
It offers a smart building dashboard
solution, which allows to visualise the
data streams of various sensors
It helps create solutions that optimise
operational efficiency by enhancing
control, automation and analytics for
building systems
It connects to a diverse set of building
systems to expand its functionality
NANTUM Smart Building
69. Integrated solutions
SmartThings series of products
It includes a free SmartThings app,a SmartThingsHub, as well as varioussensors and smart devices
The SmartThingsnative mobile applicationallowsusers to control, automate,and monitor their home environment
via mobile device
New devices can be added through the app's SmartSetup area, accessible from the app's dashboard
The hub connects directly to a home's internet router and is compatiblewith communicationprotocols,such
as ZigBee, Z-Wave, and IP-accessible devices
It enabled connecting sensors and devices to one another and to the cloud, allowingthem to communicate with the
SmartThings nativeapp
SmartThings is integratedwith IFTTT ("if this then that"), which enables users to trigger eventswhen certain things
happen on different web applications.Forexample, an IFTTT applet might state that if I leavemy
house, then SmartThings will lock my door.
70. Integrated solutions
SmartThings series of products (cont.)
The SmartThings bundle—called “Know and Control Your Home Kit”,
includes a variety of items:
• a motion sensor
• a moisture sensor
• a smart outlet
• two fobs with “presence” sensors and
• two multi-sensors that can detect movement, vibration, orientation
and temperature
71. IoT Platforms/Portals
The Telit IoT Portal is a cloud-based IoT
subscription service, offered under the model
Platform-as-a-Service (PaaS)
It is a rather low cost, pay-as-you-growservice
It gives you instantaccess to all the necessary
tools and resources for all Telit services, allowing
the user to create and manage his/her own IoT
solutions from a single web interface
Flexible data hosting and storage models
Built-in help and developer resources
Telit IoT platform
72. IoT Platforms/Portals
HomeKit is a software
framework by Apple, that lets users set
up their iOS Device to configure,
communicate with and control smart-
home appliances
By designing rooms, items and actions in
the HomeKit service, users can enable
automatic actions in the house through a
simple voice dictation to Siri or through
apps
74. IoT Platforms/Portals
This IoT platform ingests device data and
transforms that data into meaningful insights,
which can be used to optimize business or home
processes
It is a managed, cloud-hosted service that makes
it simple to connect IoT devices
It supports also blockchain service and analytic
service, allowing organisations to capture and
explore data for devices, equipment, and
machines, and discover insights that can drive
better decision-making
It makes use of AI for additional reasoning
capabilities
IBM Watson IoT Platform
75. IoT Platforms/Portals
The platform allows forIoT devices integration,usinga model
based on SensorML and OWL-S.
API-level integration ofSmart algorithms
• Combine with buildingmodels and smart algorithms,to
detect anomalies and learn ofunknown occurringevents
Integrate IoT devices
• Allowplug-and-playofsensors,actuators,controllers,and
other processingfunctions
Detect hidden events
• HVAC deficiencies, low airquality,valvefailures,
etc. Detection within minutes/hours instead of
days/months
ImproveHuman Comfort,Increase Energy Efficiency in Smart
Buildings
• Intelligent event diagnosis,machine learning,semantically-
enhanced (AI)reasoning,re-configuration ofmonitoringand
control structures
PHOEBE Domognostics™ Platform
www.phoebeinnovations.com/domognostics
76. Outline
1. Presentation of IoT equipment, their functionality and their
link to building automationapplications
2. Data exchange/communication protocolsin the IoT market
3. Exploitation of certain IoT equipment in building monitoring
and control
77. Data exchange/communication protocols
Short-range wireless
• Bluetooth mesh networking – Specification providing a mesh
networking variant to Bluetooth low energy (BLE) with increased
number of nodes and standardized application layer (Models)
• Light-Fidelity (Li-Fi) – Wireless communication technology similar to
the Wi-Fi standard, but using visible light communication for
increased bandwidth
• Near-field communication (NFC) – Communication protocols
enabling two electronic devices to communicate within a 4 cm
range
78. Data exchange/communication protocols
Short-range wireless
• Radio-frequency identification (RFID) – Technology using electromagnetic
fields to read data stored in tags embedded in other items
• Wi-Fi – technology for local area networking based on the IEEE
802.11 standard, where devices may communicate through a shared
access point or directly between individual devices
• ZigBee – Communication protocols for personal area networking based on
the IEEE 802.15.4 standard, providing low power consumption, low data
rate, low cost, and high throughput
• Z-Wave – Wireless communications protocol used primarily for home
automation and security applications
79. Data exchange/communication protocols
Medium-range wireless
• LTE-Advanced – High-speed communicationspecification for
mobile networks. Provides enhancements to the LTE standard
with extended coverage, higher throughput, and lower latency
80. Data exchange/communication protocols
Long-range wireless
• Low-power wide-area networking (LPWAN) – Wireless networks designed
to allow long-range communication at a low data rate, reducing power and
cost for transmission. Available LPWAN technologies and protocols:
LoRaWan, Sigfox, NB-IoT, Weightless, RPMA. Cellular-based networks can
work across a much larger range and data speeds
• Very small aperture terminal (VSAT) – Satellite communication technology
using small dish antennas for narrowband and broadband data
81. Data exchange/communication protocols
Wired
• Ethernet – General purpose networking standard using twisted
pair and fiber optic links in conjunction with hubs or switches
• Power-line communication (PLC) – Communication technology using
electrical wiring to carry power and data. Specifications such
as HomePlug or G.hn utilize PLC for networking IoT devices
82. Data exchange/communication protocols
Custom MQTT
Connect any device using the MQTT protocolto send/get data
Custom HTTPS
Connect any device using HTTPS protocoldirectly to send/get
data
83. Outline
1. Presentation of IoT equipment, their functionality and their
link to building automationapplications
2. Data exchange/communication protocolsin the IoT market
3. Exploitation of certain IoT equipment in building monitoring
and control
84. Exploitation of certain IoT equipment in building
monitoring and control
Get ready for a hands-onexperience in the lab and beyond!
Build your own IoT applicationsusing a variety of components
which are available in the lab
86. Disclaimer
For further information, relatedto the VET4SBO project, please visit the project’swebsite at https://smart-building-
operator.euor visit us at https://www.facebook.com/Vet4sbo.
Downloadour mobile app at https://play.google.com/store/apps/details?id=com.vet4sbo.mobile.
This project (2018-1-RS01-KA202-000411) has been funded with support from the European Commission (Erasmus+
Programme). Thispublicationreflects the views only of the author, and the Commission cannot be held responsible
for any use which may be made of the informationcontainedtherein.