“The geological structures in the Bight basin and the possibility of petroleum” school exercise which I made in a group. This was one of our class subject.
Document is published in English, I hope the readers will get some effective information
Determining the Hydrocarbon Generative Potential of the Turonian Eze-Aku Shal...Premier Publishers
The Nigeria Benue Trough is an intracratonic rift structure whose evolution is related to the early Cretaceous opening of the South Atlantic Ocean and the Gulf of Guinea. Study of the lower Benue Trough has revealed that the lower Benue Trough is rich in organic matters and as such capable of yielding significant quantity of hydrocarbons. The Eze-Aku shale in Ibii area is located in the lower part of Benue Trough. Five (5) representative Turonian Eze-Aku Shale samples were collected and analyzed to assess the petroleum generative potential by sediment logical analysis. The Shale (Eze-Aku Shale) is dark grey in color and highly fissile. From analysis carried out the Total Organic Carbon (TOC) content of the Eze-Aku Shale sample from the five (5) sections ranges from 0.51 to 1.17wt. %. The amount of Organic Carbon Content exceeds the minimal 0.5 wt. % threshold for a potential source rock, which indicates that the Shale can generate oil and gas, also the percentage of Organic Matters (OM) as shown ranges from 91.90% to 98.00% suggest a high contribution of organic matter which supports the accumulation of hydrocarbon.
Determining the Hydrocarbon Generative Potential of the Turonian Eze-Aku Shal...Premier Publishers
The Nigeria Benue Trough is an intracratonic rift structure whose evolution is related to the early Cretaceous opening of the South Atlantic Ocean and the Gulf of Guinea. Study of the lower Benue Trough has revealed that the lower Benue Trough is rich in organic matters and as such capable of yielding significant quantity of hydrocarbons. The Eze-Aku shale in Ibii area is located in the lower part of Benue Trough. Five (5) representative Turonian Eze-Aku Shale samples were collected and analyzed to assess the petroleum generative potential by sediment logical analysis. The Shale (Eze-Aku Shale) is dark grey in color and highly fissile. From analysis carried out the Total Organic Carbon (TOC) content of the Eze-Aku Shale sample from the five (5) sections ranges from 0.51 to 1.17wt. %. The amount of Organic Carbon Content exceeds the minimal 0.5 wt. % threshold for a potential source rock, which indicates that the Shale can generate oil and gas, also the percentage of Organic Matters (OM) as shown ranges from 91.90% to 98.00% suggest a high contribution of organic matter which supports the accumulation of hydrocarbon.
Granomeric Analysis of Mamu Formation and Enugu Shale around Ozalla and Its E...iosrjce
The study area lies within the Anambra Basin which geologically made up of Enugu Shale and
Mamu Formation. This study aimed at determining the geology and depositional environments of these
Formations through field relationship and grain size distribution as well as morphometric studies. The field
data shows Enugu Shale as fissile, light grey with extraformational clast which graded into Mamu Formation
which is made up of alternating sequence of shale, siltstone, mudstone, coal and sand, it shows a fluctuating
environment. The granulometric study of sand member of Mamu Formation shows characteristic very well
sorted, fine to medium grains which were deposited in relatively turbulent well aerated marine environment
probably above wave base. The bivariate and the multivariate results reveal Aeolian/shallow marine deposit.
The fissility of Enugu Shale suggests that it was deposited in low energy environment, distal to proximal lagoon
environment and the presence of extraformatonal clast indicates fluvial incursion. However, it can be concluded
that Mamu Formation was deposited in fluctuating environment ranging from an oxygenated shallow marine to
acidic swampy environment. Hence is paralic Formation.
Mechanism of Plate Tectonics and Resultant LandformsMithun Ray
Plate tectonics is a scientific theory that explains how major landforms are created as a result of Earth’s subterranean movements. The theory transformed the earth sciences by explaining many phenomena, including mountain building events, volcanoes, and earthquakes.
Geological interpretation of a low-backscatter anomaly found on the New Jerse...Larry Mayer
An enigmatic low-backscatter, acoustic anomaly occurs on the New Jersey continental margin between Hudson and Wilmington Canyon channels. The presence of the low-backscatter anomaly, as seen with 6.5- and 12-kHz data, indicates a change in the physical properties of the seafloor or near sub-surface. Analyses of seafloor and sub-surface acoustic data with previously collected sediment cores suggest the low-backscatter feature corresponds to an outcrop of older strata uncovered by erosion and non-deposition by the Western Boundary Undercurrent (WBUC). The decrease in backscatter strength is enhanced by the presence of gas in the sub-surface sediments found in the buried Chesapeake Drift.
The Ecuadorian shoreline is considered highly susceptible by impacts of tsunamis triggered by marine quakes or submarine landslides occurring close or nearby the subduction zone between the Nazca, Caribbean and South American plates. Since 1877 one dozen known tsunamis have been witnessed along this coast, mostly related to short-distanced seismic activities (earthquakes between Mw 6.9 to 8.8). However, no evidence of these impacts has been recorded in the sedimentary stratigraphy on the Ecuadorian platform so far. Nonetheless, in the southwestern
part of the Gulf of Guayaquil, due to a biological, chemical, stratigraphic and geochronologic study of a few cored samples an anomalous horizon to the other sedimentary layers has been identified and recognized as a paleo-tsunami deposit. This layer having a thickness of up to 10 cm and up to 1100 meters away from the actual shore, demonstrates various criteria which confirm its origin such as deep sea foraminifera like Pullenia bulloides, run-up and backwash features, fragments of molluscs, which are absent in other sedimentary levels, matrix of weathered chlorite potentially originated by glauconite besides other. Geocronologic evidence together with the calculated sedimentation rate, implies that a the tsunami surged the coastal lowlands around Villamil Playas about 1250 ± 50 yrs ago and must have been a major event originated from the western or northwestern direction.
Preliminary Studies of the Litho-Structural Evolution of Areas Around Obudu N...IJRESJOURNAL
ABSTRACT: Rocks underlying the northeastern sector of Obudu area forms part of the Bamenda massif which is a westward extension of the Precambrian terrains of Cameroon into southeastern Nigeria. These rocks are frequently found in the basement complex of Nigeria and include the migmatitic gneiss as the early metamorphic tectonites constituting over 60% of the outcropping rocks in the study area. The basement rock of the study area comprised of the migmatite gneiss and biotite-hornblende garnetiferous gneiss as well as the porphyroblastic gneiss and granite gneiss which formed the basement intruded by the Older granites (Pan-African granitoids). The Older granites in this area include charnockite, porphyritic granite, medium grained granite, diorite and pegmatite/aplite with relatively undeformed veins of dolerite and quartz. The presence of garnet nodules in the biotite-hornblende gneiss indicates high grade tectono-thermal metamorphism of a possible sedimentary protholith. The shearing observed in some rock outcrops are indication that there have been a series of structural deformation alongside magmatism and metamorphism in the area.
Granomeric Analysis of Mamu Formation and Enugu Shale around Ozalla and Its E...iosrjce
The study area lies within the Anambra Basin which geologically made up of Enugu Shale and
Mamu Formation. This study aimed at determining the geology and depositional environments of these
Formations through field relationship and grain size distribution as well as morphometric studies. The field
data shows Enugu Shale as fissile, light grey with extraformational clast which graded into Mamu Formation
which is made up of alternating sequence of shale, siltstone, mudstone, coal and sand, it shows a fluctuating
environment. The granulometric study of sand member of Mamu Formation shows characteristic very well
sorted, fine to medium grains which were deposited in relatively turbulent well aerated marine environment
probably above wave base. The bivariate and the multivariate results reveal Aeolian/shallow marine deposit.
The fissility of Enugu Shale suggests that it was deposited in low energy environment, distal to proximal lagoon
environment and the presence of extraformatonal clast indicates fluvial incursion. However, it can be concluded
that Mamu Formation was deposited in fluctuating environment ranging from an oxygenated shallow marine to
acidic swampy environment. Hence is paralic Formation.
Mechanism of Plate Tectonics and Resultant LandformsMithun Ray
Plate tectonics is a scientific theory that explains how major landforms are created as a result of Earth’s subterranean movements. The theory transformed the earth sciences by explaining many phenomena, including mountain building events, volcanoes, and earthquakes.
Geological interpretation of a low-backscatter anomaly found on the New Jerse...Larry Mayer
An enigmatic low-backscatter, acoustic anomaly occurs on the New Jersey continental margin between Hudson and Wilmington Canyon channels. The presence of the low-backscatter anomaly, as seen with 6.5- and 12-kHz data, indicates a change in the physical properties of the seafloor or near sub-surface. Analyses of seafloor and sub-surface acoustic data with previously collected sediment cores suggest the low-backscatter feature corresponds to an outcrop of older strata uncovered by erosion and non-deposition by the Western Boundary Undercurrent (WBUC). The decrease in backscatter strength is enhanced by the presence of gas in the sub-surface sediments found in the buried Chesapeake Drift.
The Ecuadorian shoreline is considered highly susceptible by impacts of tsunamis triggered by marine quakes or submarine landslides occurring close or nearby the subduction zone between the Nazca, Caribbean and South American plates. Since 1877 one dozen known tsunamis have been witnessed along this coast, mostly related to short-distanced seismic activities (earthquakes between Mw 6.9 to 8.8). However, no evidence of these impacts has been recorded in the sedimentary stratigraphy on the Ecuadorian platform so far. Nonetheless, in the southwestern
part of the Gulf of Guayaquil, due to a biological, chemical, stratigraphic and geochronologic study of a few cored samples an anomalous horizon to the other sedimentary layers has been identified and recognized as a paleo-tsunami deposit. This layer having a thickness of up to 10 cm and up to 1100 meters away from the actual shore, demonstrates various criteria which confirm its origin such as deep sea foraminifera like Pullenia bulloides, run-up and backwash features, fragments of molluscs, which are absent in other sedimentary levels, matrix of weathered chlorite potentially originated by glauconite besides other. Geocronologic evidence together with the calculated sedimentation rate, implies that a the tsunami surged the coastal lowlands around Villamil Playas about 1250 ± 50 yrs ago and must have been a major event originated from the western or northwestern direction.
Preliminary Studies of the Litho-Structural Evolution of Areas Around Obudu N...IJRESJOURNAL
ABSTRACT: Rocks underlying the northeastern sector of Obudu area forms part of the Bamenda massif which is a westward extension of the Precambrian terrains of Cameroon into southeastern Nigeria. These rocks are frequently found in the basement complex of Nigeria and include the migmatitic gneiss as the early metamorphic tectonites constituting over 60% of the outcropping rocks in the study area. The basement rock of the study area comprised of the migmatite gneiss and biotite-hornblende garnetiferous gneiss as well as the porphyroblastic gneiss and granite gneiss which formed the basement intruded by the Older granites (Pan-African granitoids). The Older granites in this area include charnockite, porphyritic granite, medium grained granite, diorite and pegmatite/aplite with relatively undeformed veins of dolerite and quartz. The presence of garnet nodules in the biotite-hornblende gneiss indicates high grade tectono-thermal metamorphism of a possible sedimentary protholith. The shearing observed in some rock outcrops are indication that there have been a series of structural deformation alongside magmatism and metamorphism in the area.
Developing Conceptual Aquifer Geometry, Structural Geological Control and Pos...iosrjce
IOSR Journal of Applied Geology and Geophysics (IOSR-JAGG) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of Applied Geology and Geophysics. The journal welcomes publications of high quality papers on theoretical developments and practical applications in Applied Geology and Geophysics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
A great landmass which was thought to be in the geological past, splitting into fragments drifting apart and again colliding into one another is called a supercontinent.1. VAALBARA -First ever made continent was Vaalbara which was 3.6 billion years old, it was named after kaapvaal and Pilbara which were the most ancient cratons present on that land mass. Kaapvaal is in Africa and Pilbara is in western Australia.2. UR- A supercontinent which was 3000 m.y.a and it was smaller than modern day Australia.3. KENORLAND- 2700 m.y.a famous events were HURONIAN GLACIATION. Also known as SNOWBALL EARTH.Responsible for formation of phytoplanktons.and VREDEFORT impact.4. COLUMBIA- Also called as NUNA . Period between Snowball Earth and subsequent Oxidation is called as THE BARREN BILLION.5. RODINIA- 1130 m.y.a.SECOND SNOWBALL EARTH.Also known as NEOPROTEROZOIC GLACIATION.6. PANNOTIA- 750 m.y.aThe formation of Pannotia was associated with the breakup of Rodinia into Proto- Gondwana and Proto-Laurasia. Two oceans were PANTHALSSA and Pan-African Ocean.7. PANGEA- One of the Youngest Supercontinent of all time , there are plenty of evidences of this Supercontinent. Like marine fossils from TETHYS OCEAN can be observed in Himalayas.
Similar to Verslag geotektoniek-biharie-dwarka-gopie-jhan-jhan-samjhawan (20)
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
1. Faculteit der Technologische Wetenschappen
“The geological structures in the Bight basin and
the possibility of petroleum”
Geotektoniek
Field of study : Mineral Resources
Phase : B 2
Course : Geotektoniek
Teacher : Drs. A. Nelson
Paramaribo, Friday 5th of june 2015
Names en student numbers :
Biharie Dheeraj (20130423)
Dwarka Arvind (12dp1012)
Gopie Rishi (12dp1014)
Samjhawan Anroedh (20130179)
Jhan Jhan Lokhnath (11dp1029)
2. 1
Preface
This report is made as a completion of the course Geotectonic. In this report the students; Biharie, Dwarka,
Gopie, Jhan- Jhan and Samjhawan did a case study of an area in the Bight Basin. The case was given by the
teacher, Drs. A. Nelson. The students tasks was to use their knowledge and creativity to analyze the given case.
The results of the group analysis are displayed in this report.
We would like to thank our teacher, Drs. A. Nelson, for his valuable input and support throughout the entire
course period.
3. 2
Content
List Of Figures .......................................................................................................................................................3
Introduction............................................................................................................................................................4
1. Background information of the bight basin....................................................................................................5
2. Stratigraphy of the bight basin........................................................................................................................7
2.1 Aspects of the Petroleum systems................................................................................................................9
2.2 Source rock...................................................................................................................................................9
2.3 Reservoirs and seals ...................................................................................................................................10
2.4 Reservoir traps............................................................................................................................................10
3. Exploration ...................................................................................................................................................12
4. Environmental Impact & Risk Assessment according to seismic activity .....................................................13
4.1 System of methods to identify environmental impacts and risks.........................................................14
4.2 Lightning 3D Marine Seismic Survey environmental hazards ..............................................................14
Conclusion ...........................................................................................................................................................17
Sources.................................................................................................................................................................18
4. 3
List Of Figures
Fig. 1: Rifting between the Australian and Antarctic plates 5
Fig. 2: Australian bight basin (Red Square) 6
Fig. 3: Geological summary of the Bight Basin 7
Fig. 4: Seismic lines bight basin 8
Fig. 5: 2D Seismic line interpretation overview 11
Fig. 6: Licensed area 12
Fig. 7: Regional Location of the Lightning 3D MSS 13
5. 4
Introduction
The Bight Basin (Jurassic-Cretaceous) is a large basin, mainly offshore, that extends along the southern
Australian margin. From the southern tip of Western Australia, across the Great Australian Bight to the
western tip of Kangaroo Island. The Basin contains a Late Jurassic to Late Cretaceous sedimentary succession
that is 15 km thick in the thickest deposition centre, the Ceduna Sub-basin. In the east of the main deposition
centre, a thin Bight Basin succession overlies the western tip of the mostly Proterozoic Polda Basin (Totterdell
& Krassay, 2003).
Geoscience Australia undertook an integrated geological study of the Bight Basin between 1999 and 2003,
which resulted in a new chronostratigraphic framework and an improved understanding of the tectonic and
depositional history of the basin. The stratigraphic and structural interpretation of 8600 kilometers of new and
high quality regional 2D seismic reflection data was the key component of this study (Totterdell & Krassay,
2003).
The stratigraphic columns and 2D seismic reflection data described above, is used for the interpretation of the
Bight Basin and is displayed in this report named : “The geological structures in the Bight basin and the
possibility of petroleum”. The core of the report can be divided in the following 4 chapters:
1. Background information of the bight basin
2. Stratigraphy of the bight basin
3. Exploration
4. Environment of the area program
The report also includes a list of figures, a conclusion and a list of sources that are used to complete the report.
6. 5
1. Background information of the bight basin
The Bight Basin (Fig. 2) is an area of over 800 000 km2
, straddling the Western border of Australia and South
Australia. The Basin is onshore and offshore in water depths over 5000 meter. It is one of the largest offshore
frontier basins in the world (DMITRE, 2012) (Geoscience Australia, n.d.).
The Bight Basin contains a Late Jurassic to Late Cretaceous sedimentary succession and is located in the
central portion of the Australian Southern Rift System. The Basin is the result of extension and subsidence
following the rifting between the Australian and Antarctic plates (Fig. 1) (Wilcox, 1988).
The basin has fluvial to paralic, a mixture of marine and continental deposits, sediments of Late Jurassic to
Early Cretaceous age. These sediments are disconformably overlain by nearshore marine to non-marine Late
Cretaceous sediments. Sediments from the interior was dumped into the rapidly subsiding rift system to the
south, the plat formal portion of the basin. The platform is thus a clastic bypass margin (Wilcox, 1988).
Fig. 1: Rifting between the Australian and Antarctic plates
Australia-
Antarctica
Rift
8. 7
2. Stratigraphy of the bight basin
The basin consists a Jurassic to Cretaceous rift and post-rift succession up to 15 km thick. It is shown as a
syncline-rift fluviolacustrine succession, properly overlooked by Late Cretaceous paralic to marine sediments
combined with the post-rift phase of continental breakup (Geoscience Australia, 2014).
Figure 3: Geological summary of the Bight Basin (Geoscience Australia, 2014)
The earliest sediment in basin which were separated in the Eyre- basin are the fluvial and lacustrine
sandstone and mudstones of Late Jurrasic age. This is part of the Sea Lion and Minke Supersequences which
were deposited during the earlier rift development stages (Fig. 3) (Geoscience Australia, 2014).
The Jurassic upper crustal extension was followed by a period of thermal subsidence during the Early
Cretaceous. The Berriasian Southern Right Supersequence had acces in Echidna 1 in the Duntroon Sub-basin,
described by dark carbonaceous mudstone with interbedded gritty sandstone of the Echidna Formation
arranged into the lacustrine shale of the Neptune Formation. The Southern Right Supersequence is described
9. 8
by the fluvial sandy to shaly succession of the Loongana Formation, in the Eyre and Ceduna subbasins. The
fluviolacustrine succession is pursued by the Valanginian to mid-Albian Bronze Whaler Supersequence,
comprising mudstone, claystone, siltstone and minor coal of the Borda Formation in the Duntroon Sub-basin
and the eastern part of the Ceduna Sub-basin. Nearby the central and the northern parts of the Bight Basin,
the Bronze Whaler Supersequence includes sandstone, silt and shale with wood fragments of the late
Loongana Formation. Glauconitic and carbonaceous rich claystone, sandstone, siltstone and shale of the
Madura Formation. Claystone, siltstone and shales of the early parts of the Toondi Formation. Marine
incursions were explained during the Albian, and appear more common in the central to western areas,
marking the beginning of a period of accelerated subsidence (Fig. 4 ) (Geoscience Australia, 2014).
Thick deltaic and marine successions were settled during the late Albian to the Santonian (Blue Whale, White
Pointer and Tiger Supersequences), straight to a phase of increasing subsidence ultimately with the late
Santonian breakup. In the Duntroon and Ceduna sub-basins, the drilled lithologies found in interbedded
fluviodeltaic claystone and sandstone of the late Albian Ceduna Formation overlooked by the sandstone,
siltstone and coal of the Cenomanian Platypus Formation. Nearly at the west the facies moves into the near
shore fine sandstone and the silt of ‘unit a’ and silty mudstone of ‘unit b’ in Potoroo 1 (northern Ceduna Sub-
basin). The distal areas of the Bight Basin, the lithologies are considered to be more mud dominated, this is
based on the seismic (Fig. 4) geometries and characters (Geoscience Australia, 2014).
Figure 4: Seismic lines bight basin (Geoscience Australia, 2014)
10. 9
2.1 Aspects of the Petroleum systems
Maximum transgression that took place in the Santonian in the time when prodelta shale and mudstone of
the Wigunda Formation were settled. Transition from non-marine, paralic to marine sedimentation is located
in the eastern parts of the basin by the settling of the Wombat Sandstone Member.
The late Santonian breakup was persued by another period of thermal subsidence. The growth in clastic
sediment influx led to the settling of the thick sand-dominated delta structures of the Hammerhead.
Supersequence in the Ceduna and Recherche sub-basins (Fig. 4) were drilled in the supersequence consists of
amalgamated sandstone, interbedded claystone–sandstone and massive mudstone units of the Potoroo
Formation, or its lateral equivalent on the platformal areas, the sandstone-dominant Nurina Formation. In
the wells of the eastern Ceduna Sub-basin, the basal Hammerhead Supersequence includes shales of the
Wigunda Formation.
A scope of irregularity at the top of the Hammerhead Supersequence divides the Bight Basin from the thin
transgressive sandstones and massive open-marine carbonates of the Tertiary Eucla Basin (Geoscience
Australia, 2014).
2.2 Source rock
The Jurassic to Cretaceous succession in the Bight Basin holds a number of source intervals to be found in
marine and non-marine carbonaceous shales, coals and oil shales (Fig. 3). Geoscience Australia evaluated
distribution of the potential source intervals based on the regional sequence stratigraphic framework and the
potential petroleum systems present, along with the regional palaeogeography and geochemical data from
wells. Minor oil and gas shows were detected by wells until now and the majority of intervals divided in
exploration wells. These are not fully developed for oil generation. The source rock quality in the deeper
parts of the basin is implied to range from good to excellent. Modelling shows that full growth were reached
to generate and expel liquid and gaseous hydrocarbons.
The Borda Formation facies of the Bronze Whaler Supersequence appears as the richest and most oil-prone
interval penetrated to date, both in terms of TOC and hydrogen index (Fig. 6). Coal interbedded within the
claystone has HI values averaging between 210 to 330 mg HC/g TOC and TOC values up to 56%.
Part of the same petroleum system, naturally rich fluviolacustrine shales takes place within the underlying
Southern Right Supersequence (Loongana Formation) that have TOC average of 1.2% . Rock-Eval results
suggests low potential for generating liquid hydrocarbons. However a small number of samples were
available; shales may be both thicker and more thermally mature in locations away from basement highs.
Shales of the Blue Whale Supersequence (Toondi and Ceduna formations) with an average of 2.6% TOC,
while the coals reach up to 62% TOC, with HI values up to 230 mg HC/g TOC for shales and 345 mg HC/g TOC
for coals. Source rock quality in Platypus 1 is good for both coaly and shaly lithologies. The best source rocks
11. 10
are supposed to be found in the central Ceduna Sub-basin, where deep water, restricted marine
environments of deposition are interpreted for this time.
Other important source intervals are the coal-prone Platypus Formation (and its ‘unit b’ equivalent in Potoroo
1) and the claystone of the basal Wigunda Formation, within the White Pointer and early Tiger
Supersequences. In the inboard basin areas these intervals are volumetrically less significant and more gas
prone, but the distal portions of these sections, in the outer Ceduna Sub-basin, are interpreted to be much
thicker and more mature. So they may have generated light oils (Geoscience Australia, 2014).
2.3 Reservoirs and seals
Reservoir, seal and source potential of each unit are summarised in Figure 3. With the existence and quality
of the source rock, are wells mostly loacated on the basin margin, reservoir and seal distribution is explained
by associating the well results to seismic data and gathered depositional models.
Fluviodeltaic sandstones of the Potoroo Formation have great reservoir but they may not have enough
regional seal. Thick and laterally extensive claystone units within the Hammerhead Supersequence are
possibly present and supply intraformational seals. Some parts of the basin may have enough sealing quality
of the interbedded marl and limestone of the overlying Eucla Basin.
Other important reservoir aspirant are deltaic sandstones of the Ceduna and Platypus formations, where
porosities of up to 30% have been detected. Marine sandstones of the Tiger Supersequence (Wigunda and
Potoroo formations) also have great reservoir quality. Apart of the regional highs, prodelta mudstone of the
Wigunda Formation brings usefull seal for these highly porous intervals.
Although the high reservoir quality, these intervals are not easy to be balanced, because of the high depth
burial. Shales of the Madura and Toondi formations and intraformational shale of the Loongana Formation
can give enough seal for these potential reservoirs. Major cap rocks lays in the Borda and Neptune
formations. Great quality reservoir rocks have been detected in the overlying Eucla Basin, within the marine
Wobbegong Supersequence (Pidinga Formation and Hampton Sandstone) (Geoscience Australia, 2014).
2.4 Reservoir traps
Traps involve highly faulted, rotated and shattered anticlinal structures, tilted fault blocks and unconformity
traps on the flanks of the rotated anticlines (Fig. 4 and 5). The high grade of faulting and complexity of
structures needs a close grid, high-resolution seismic to adequately assess seal integrity.
Crestal erosion along with the basement highs due to tectonic uplift, has resulted in the development of
significant stratigraphic traps. Opportunities for stratigraphic traps also lays below incised valley systems, like
the ones mapped in the Ceduna Sub-basin at Santonian level (Geoscience Australia, 2014).
12. 11
Figure 5: 2D Seismic line interpretation overview of the group
13. 12
3. Exploration
The use of 3D seismic is to better understand the subsurface geology within the license blocks Epp 31 and Epp
32 (Fig. 6) and to define potential prospective petroleum targets for exploration. This mapping should be
undertaken by an experienced seismic contractor using a purpose-built seismic ship, towing equipment along a
series of established seismic lines within the survey area. As the ship l travels along the survey lines, a series of
acoustic pulses, activated at approximately every 11 seconds, will be directed down through the water column
into the seafloor via a dual source array (Geoscience Australia, 2014).
The acoustic signals are weakened through the subsurface geological structure; reflect at geological
boundaries and the reflected signals are detected using hydrophones, arranged in series along a number of
cables (in a string) towed behind the ship. Data collected by the hydrophones is stored in on board computers
for processing and analysis, allowing the structure of the underlying geological strata to be mapped and
potential hydrocarbon reservoir targets to be identified (Geoscience Australia, 2014).
The geology structurally is very complex for 2D interpretation, 3D seismic mapping is capable of unlocking
the complex geology of the Bight basin. Poor interpretation can led to drilling off structure.
Figure 6: Licensed area (O’Brien, Paraschivoiu, & Hibburt, 1990)
14. 13
4. Environmental Impact & Risk Assessment according to seismic activity
In agreement with the offshore petroleum and Greenhouse Gas storage, environmental hazard identification
and risk assessment has been started to evaluate the possibly sources of environmental and social impacts
connected with lightning MSS action. This includes an evaluation of impacts and risks created by operational
and unplanned actions, and the identification of control measures to minimize the impacts and risks to
acceptable degree (Australia/New Zeeland Authorities, 2012) (Australian Government, 2010).
Activity location
The Lightning 3D MSS activity, shown on a regional basis in (Fig. 7) will be undertaken within the blocks
EPP31 (41) and EPP32 (42) non‐permit areas (Bight Basin). The Lightning 3D MSS covers an area of
approximately 3,000km2 and is located entirely within Commonwealth waters of the bight basin.
Fig 7: Regional Location of the Lightning 3D MSS (Australia/New Zeeland Authorities, 2012)
15. 14
4.1 System of methods to identify environmental impacts and risks
Environmental threats, possible impacts and risks that are created by the lightning MSS have been recognized
by taking the followings steps (Australia/New Zeeland Authorities, 2012) :
Describe the activity and related environmental characteristics
Determine the environmental and social values
Determining the essential risks of each possible environmental hazard associated with the action of the
MSS
Determining the remaining risks of each possible environmental hazard with recognized control
measured adopted
With control applied we should describe if the impact or risk it at acceptable level, if it’s not the case
than the activity will be reviewed and other control measures will be added until the impacts and risks
are at an acceptable level.
Evaluation of the impact and risk assessment of each possible environmental hazard is done by using
Qualitative Environmental Risk Assessment based on ISO14001 (Environmental Management Systems),
ISO31000: 2009 (Risk Management) and HB203: 2012 (Environmental Risk Management – principles
and process )
4.2 Lightning 3D Marine Seismic Survey environmental hazards
There are in total 19 hazards that could have an impact on the environment by using the lightning 3D marine
seismic survey, which can be grouped in the following categories (Australia/New Zeeland Authorities, 2012):
Mobilisation of the seismic and support vessels to the proposed survey area:
Introduction of non- indigenous invasive marine species (IMS) from ballast water discharge or
biofouling.
Physical presence of the Seismic ship:
Disruption to commercial fishing activities;
Disruption to commercial shipping;
Disruption to Tourism; and
Light pollution due to 24 hour MSS activities.
16. 15
Seismic acquisition:
Discharge of acoustic source pulses in the proposed MSS area;
Sound from operation of vessels; and
Sound from operation of helicopters.
General vessel operations:
Routine waste discharges from the seismic and support vessels (oily water, sewage,
foodscraps); and Air emissions.
Non-Routine events:
Accidental hydrocarbon spill due to collision with another vessel;
Chemical/oil spill through deck drain system;
Oil spill during refueling at sea;
Solid non-biodegradable/hazardous waste overboard incident;
Seismic streamer perforation and/or loss in the marine environment; and
Collision with a cetacean.
To have an idea how these hazard activities should be monitored an example will follow next.
1. Non Routine Incident – refueling Spill
Background Information and Potential Impacts:
A well- known source of oil spill in offshore marine operations is associated with refueling (bunkering)
activities. Causal pathways include hose breaks, coupling failures and tank over fill. Sea refueling of the
lightning MSS is a risky activity and will be the exception. The refueling of it will happen at port facilities.
Spills to the marine environment may cause impacts to marine fauna through contact with
contaminated water residues (Australia/New Zeeland Authorities, 2012).
2. Control measures
If refueling will happen offshore the following steps will be applied (Australia/New Zeeland Authorities,
2012):
Activity will be fully supervised, in accordance with documented bunkering procedures
there will be a meeting to check all the tools for the operation before it starts
refueling activity will only happy in good weather conditions, good visibility and during daylight hours
the refueling equipment will be constantly inspected and tested
Tank levels will be monitored so they are not over‐filled;
The transfer area will be bunded with spill kits in the event of a spill or leak
To make sure that SOPEP (Ship Oil Pollution Emergency Plan) equipment is available, and tested to
response by spill events by appropriately trained personnel.
17. 16
3. Spill Response Strategy:
In the event of a spill, it is expected a natural weathering/surveillance monitoring strategy will
be adopted due to the type and volume of the hydrocarbon released.
Given the small spill volumes involved, the very limited area where marine impacts might be experienced; and
the rapid evaporation/dispersion of MGO( marine gas oil ), impacts to protection priorities if present
(whales, turtles, seabirds, sharks, pinnipeds) are expected to be negligible and exposure considered very
unlikely. The residual risk associated with the adoption of a natural weathering/monitoring response
strategy to these protection priorities is assessed as low. After all there should be a monitoring team to
observe and check the progress or quality of the process of the MSS to maintain a good environment at all
times (Australia/New Zeeland Authorities, 2012).
18. 17
Conclusion
Research has shown that there are source rock, traps, seals and reservoirs in the bight basin. This is an
indication of petroleum in the basin. The 2D interpretation of the group also shows potential traps for
petroleum (faults and anticline). The different also show that blocks EPP31 (41) and EPP32 (42) are potential
sources of petroleum. 3D seismic is used after the 2D survey for better data.
3D seismic data is used by the big companies because they are reliable and give a better insight. Other
methodic, such as drilling, are used for further exploration.
Environmental Impact and Risk Assessment are done according to seismic activity. These assessments are
done for the protection of the ecosystems, in the area of exploration, from environmental disasters.
19. 18
Sources
Australia/New Zeeland Authorities. (2012). Managing environmentrelated risk. Sydney: SAI GLOBAL
limited.
Australian Government. (2010). ISO 31000 - Risk management. Sydney: SAI GLOBAL limited.
DMITRE. (2012). Bight BASIN. Opgeroepen op 6 3, 2015, van Petroleum en geothermal in Australia:
http://www.petroleum.dmitre.sa.gov.au/__data/assets/pdf_file/0020/26912/prospectivity_bight.pdf
Geoscience Australia. (2014). Regional Geology Of The Bight BASIN. OFFSHORE PETROLEUM
EXPLORATION, pp. 1-16.
Geoscience Australia. (n.d.). Bight Basin. Opgeroepen op 6 3, 2015, van Geoscience Australia:
http://www.ga.gov.au/scientific-topics/energy/province-sedimentary-basin-
geology/petroleum/offshore-southern-australia/bight
O’Brien, G., Paraschivoiu, E., & Hibburt, J. (1990). Great Australian Bight. The petroleum geology of South
Australia, p. ch. 4.
Totterdell, & Krassay. (2003, 1). Bight Basin. Opgeroepen op 6 1, 2015, van Geoscience Australië:
http://www.ga.gov.au/scientific-topics/energy/province-sedimentary-basin-
geology/petroleum/offshore-southern-australia/bight
Wilcox, J. (1988). Rig Seismic research cruises 10 & 11 : geology of the central Great Australian Bight
region. Canberra: Bureau of Mineral Resources, Geology and Geophysics.