VENTILATION_IN_BUILDINGS_1650891110788.pptx
•
0 likes•3 views
This document discusses different types of ventilation systems for buildings. It describes natural ventilation systems like single-sided ventilation, cross ventilation, and the stack effect. Single-sided ventilation uses openings on one side of a building to ventilate a space with limited area. Cross ventilation achieves greater air flow by opening windows on different facades to allow air to flow through a room. The stack effect uses differences in air pressure and temperature to ventilate buildings.
Report
Share
Report
Share
Recommended
VENTILATION_IN_BUILDINGS.pptx
Ventilation refers to circulating air in an area to improve air quality or remove unwanted substances. There are natural and mechanical ventilation systems, with natural relying on open windows and vents and mechanical using fans. Buildings can be naturally ventilated through single-sided ventilation with openings on one side, cross ventilation using opposing openings on opposite sides using wind pressure, or the stack effect where warm air rises up chimneys or shafts creating pressure differences.
Building Ventilation
Building ventilation involves introducing outdoor air into indoor spaces to provide fresh air and remove stale, polluted air. It can occur through natural means using wind and buoyancy, mechanical means using fans and blowers, or a hybrid approach. The key purposes of ventilation are to dilute indoor pollutants, replenish oxygen, regulate temperature, and improve occupant comfort. Effective ventilation considers the rate of outdoor air introduced, overall airflow directions from clean to dirty zones, and efficient air distribution throughout the space.
ventilation-160317023710.pptx
This document discusses different methods of ventilation in buildings. It describes natural ventilation which uses wind and thermal forces to move air through purpose-built openings. Natural ventilation includes cross ventilation driven by wind pressure and stack ventilation driven by warm air rising. Mechanical ventilation uses fans and blowers when natural forces are insufficient. Hybrid or mixed-mode ventilation combines natural and mechanical methods.
Atmospheric dampness and ventilation
The document discusses various methods of ventilation for buildings. It describes how moisture from everyday activities like breathing and cooking can lead to mold growth if air is not properly ventilated. Different types of ventilation systems are outlined, including extract ventilation for wet rooms, whole-building ventilation for general air exchange, and purge ventilation for fast pollutant removal. Both natural ventilation techniques like stack effect and mechanical systems like fans are covered.
HVAC: Ventillation
A lecture in the process of changing or replacing air in any space to provide high indoor air quality (i.e. to control temperature, replenish oxygen, or remove moisture, odors, smoke, heat, dust, airborne bacteria, and carbon dioxide).
Ventilation
Ventilation systems in buildings serve several key functions:
1. To provide healthy indoor air quality by removing odors, smoke and carbon dioxide while replenishing oxygen.
2. To maintain thermal comfort by controlling temperature and removing excess moisture.
3. To cool building structures.
Natural ventilation relies on pressure differences and temperature differences to move air through openings, while mechanical ventilation uses fans and ducts to control indoor air movement and quality. The type of ventilation used depends on factors like room size, occupancy levels, and ability to effectively ventilate without mechanical assistance.
An introduction to ventilation
Ventilation is the intentional introduction of outdoor air into a building to dilute and remove indoor air contaminants. It can be achieved through natural or mechanical means. Natural ventilation relies on wind and thermal pressure through openings, while mechanical ventilation uses fans. Proper ventilation is important for indoor air quality and occupant health. Standards like ASHRAE 62.2 provide guidelines for whole-building ventilation and local exhaust in high-moisture areas. Energy recovery systems can improve ventilation efficiency. Building pressurization controls air movement. Maintaining pressure differentials between zones can help isolate contaminant spread.
An introduction to ventilation
Ventilation is the intentional introduction of outdoor air into a building to dilute and remove indoor air contaminants. It can be achieved through natural or mechanical means. Natural ventilation relies on wind and thermal pressure through openings, while mechanical ventilation uses fans. Proper ventilation is important for indoor air quality and occupant health. Standards like ASHRAE 62.2 provide guidelines for whole-building ventilation and local exhaust in high-moisture areas. Energy recovery systems can improve ventilation efficiency. Building pressurization controls air movement. Maintaining pressure differentials between zones can help isolate contaminant spread.
Recommended
VENTILATION_IN_BUILDINGS.pptx
Ventilation refers to circulating air in an area to improve air quality or remove unwanted substances. There are natural and mechanical ventilation systems, with natural relying on open windows and vents and mechanical using fans. Buildings can be naturally ventilated through single-sided ventilation with openings on one side, cross ventilation using opposing openings on opposite sides using wind pressure, or the stack effect where warm air rises up chimneys or shafts creating pressure differences.
Building Ventilation
Building ventilation involves introducing outdoor air into indoor spaces to provide fresh air and remove stale, polluted air. It can occur through natural means using wind and buoyancy, mechanical means using fans and blowers, or a hybrid approach. The key purposes of ventilation are to dilute indoor pollutants, replenish oxygen, regulate temperature, and improve occupant comfort. Effective ventilation considers the rate of outdoor air introduced, overall airflow directions from clean to dirty zones, and efficient air distribution throughout the space.
ventilation-160317023710.pptx
This document discusses different methods of ventilation in buildings. It describes natural ventilation which uses wind and thermal forces to move air through purpose-built openings. Natural ventilation includes cross ventilation driven by wind pressure and stack ventilation driven by warm air rising. Mechanical ventilation uses fans and blowers when natural forces are insufficient. Hybrid or mixed-mode ventilation combines natural and mechanical methods.
Atmospheric dampness and ventilation
The document discusses various methods of ventilation for buildings. It describes how moisture from everyday activities like breathing and cooking can lead to mold growth if air is not properly ventilated. Different types of ventilation systems are outlined, including extract ventilation for wet rooms, whole-building ventilation for general air exchange, and purge ventilation for fast pollutant removal. Both natural ventilation techniques like stack effect and mechanical systems like fans are covered.
HVAC: Ventillation
A lecture in the process of changing or replacing air in any space to provide high indoor air quality (i.e. to control temperature, replenish oxygen, or remove moisture, odors, smoke, heat, dust, airborne bacteria, and carbon dioxide).
Ventilation
Ventilation systems in buildings serve several key functions:
1. To provide healthy indoor air quality by removing odors, smoke and carbon dioxide while replenishing oxygen.
2. To maintain thermal comfort by controlling temperature and removing excess moisture.
3. To cool building structures.
Natural ventilation relies on pressure differences and temperature differences to move air through openings, while mechanical ventilation uses fans and ducts to control indoor air movement and quality. The type of ventilation used depends on factors like room size, occupancy levels, and ability to effectively ventilate without mechanical assistance.
An introduction to ventilation
Ventilation is the intentional introduction of outdoor air into a building to dilute and remove indoor air contaminants. It can be achieved through natural or mechanical means. Natural ventilation relies on wind and thermal pressure through openings, while mechanical ventilation uses fans. Proper ventilation is important for indoor air quality and occupant health. Standards like ASHRAE 62.2 provide guidelines for whole-building ventilation and local exhaust in high-moisture areas. Energy recovery systems can improve ventilation efficiency. Building pressurization controls air movement. Maintaining pressure differentials between zones can help isolate contaminant spread.
An introduction to ventilation
Ventilation is the intentional introduction of outdoor air into a building to dilute and remove indoor air contaminants. It can be achieved through natural or mechanical means. Natural ventilation relies on wind and thermal pressure through openings, while mechanical ventilation uses fans. Proper ventilation is important for indoor air quality and occupant health. Standards like ASHRAE 62.2 provide guidelines for whole-building ventilation and local exhaust in high-moisture areas. Energy recovery systems can improve ventilation efficiency. Building pressurization controls air movement. Maintaining pressure differentials between zones can help isolate contaminant spread.
Ventilation - Air movement
This document discusses ventilation and air movement in buildings. It covers natural ventilation strategies like wind patterns, opening positions and sizes, and stack effect. Cross ventilation and the venturi effect are explained as ways to induce air flow. Maintaining indoor air quality by supplying fresh air and removing pollutants requires careful ventilation design considering factors like wind direction, constrictions to increase speed, and opening placement and size. Various techniques are presented, like wind scoops, jets and tunnels, to study air movement and optimize ventilation performance in buildings.
Lecture 4 natural ventilation
Natural ventilation utilizes stack effect and wind pressure to supply outdoor air into buildings for ventilation and cooling without fans or mechanical systems. It reduces energy consumption for air conditioning. Key concepts include an airtight building envelope with operable windows and exhaust units located high with intakes low to facilitate airflow. Benefits include reduced costs and energy usage while providing thermal comfort, though effectiveness varies with outdoor conditions. Application requires considering factors like prevailing winds, vegetation, inlet/outlet placement and sizing.
Ventilation system
This document discusses ventilation requirements and systems. It defines ventilation as changing the air in an enclosed space to provide fresh air for respiration and control factors like carbon dioxide, moisture, heat, and odors. Ventilation requirements vary by building usage but are often measured in air changes per hour. Systems can be natural (using airflow without fans) or mechanical (using ducts and fans). Natural ventilation provides benefits like improved indoor air quality but requires proper building design. Mechanical systems provide more air flow control and constant fresh air intake. Common mechanical systems include natural inlet/mechanical exhaust, mechanical inlet/natural exhaust, and fully mechanical. The document also discusses fan types, air filters, and design considerations to minimize mechanical ventilation needs.
ventilation-160317023710.pptx
Building ventilation involves introducing outdoor air into indoor spaces to provide healthy air and remove pollutants. There are three main methods: natural ventilation which relies on wind and buoyancy forces, mechanical ventilation which uses fans, and hybrid/mixed-mode ventilation which combines natural and mechanical methods. Natural ventilation works through cross ventilation driven by wind pressure differences or stack ventilation using warmer air rising, while mechanical ventilation is needed when natural forces are insufficient. Hybrid ventilation uses mechanical fans to supplement natural ventilation when flow rates are too low.
Forced Draft Ventilation
This document discusses different methods of ventilation for buildings, including forced/mechanical ventilation and natural ventilation. Forced ventilation uses fans and ductwork to exchange indoor air with outside air or circulate air within a building to control temperature, humidity, and air quality. Natural ventilation relies on operable windows, vents, and stack effect to move air without mechanical systems. Proper ventilation is important for maintaining indoor comfort and air quality in various building types like industrial facilities, commercial buildings, and homes.
Ventilation.pptx
This document discusses different types of ventilation for buildings. It defines ventilation as replacing or circulating air to provide good indoor air quality. The main types discussed are natural ventilation, mechanical ventilation, and hybrid/mixed-mode ventilation. Natural ventilation uses openings to allow air flow via pressure differences without fans. Mechanical ventilation uses powered fans or blowers. Hybrid systems allow controlled introduction of outdoor air using both mechanical and passive means. The document also outlines purposes of ventilation like maintaining comfort, removing odors and contaminants, and creating air movement.
Passive cooling
Passive cooling refers to techniques used to cool buildings without energy consumption, such as those used in passive house designs. Passive cooling aims to slow heat transfer into buildings and remove unwanted heat through principles of physics like shading, natural ventilation strategies like stack ventilation and cross ventilation, evaporative cooling, and using thermal mass materials. Some key passive cooling techniques discussed are shading, natural ventilation methods, night ventilation to pre-cool buildings, evaporative cooling, desiccant cooling, and underground cooling pipes or storage chambers.
passivecooling-130703193354-phpapp02.pdf
Passive cooling refers to techniques used to cool buildings without energy consumption, such as those in passive house design. Passive cooling aims to slow heat transfer into buildings and remove unwanted heat through principles of physics like shading, natural ventilation strategies like stack effect and cross ventilation, evaporative cooling, and using thermal mass. Effective passive cooling provides indoor comfort while having low maintenance and energy consumption.
Ventilation System
This document discusses ventilation systems and strategies. It begins by explaining the need for ventilation in buildings to remove stale air and bring in fresh air. It then describes different types of ventilation systems including natural ventilation, mechanical ventilation, exhaust ventilation, supply ventilation, balanced ventilation, and energy recovery systems. The document also discusses air conditioning systems like window units, split units, centralized units, and packaged units. It covers the components and cycles of air conditioning systems. Green roofs are also summarized, including their benefits like reducing temperatures and providing stormwater management. Design standards and factors for green roofs are briefly mentioned.
Basics of ventilation by jj
The document discusses different types of ventilation systems. Natural ventilation uses natural forces like wind and stack effect to circulate air without mechanical systems. Forced ventilation uses fans and blowers to provide ventilation when natural forces are insufficient. Hybrid ventilation relies primarily on natural ventilation but uses mechanical systems to supplement airflow when needed. Evaporative cooling is also discussed, which uses the evaporation of water to lower air temperature in a cost-effective way. Different fans and their applications are outlined. Two-stage evaporative cooling units that provide initial indirect evaporative cooling before direct cooling are described.
Natural ventilation
Natural ventilation uses natural forces like wind and buoyancy to introduce fresh air into buildings. It ventilates spaces by providing oxygen, diluting contaminants, and promoting air movement for comfort. There are three main natural ventilation methods: single-sided ventilation using only openings on one wall, cross-ventilation using openings on opposite walls, and stack effect using cooler air intake on the lower sides and warmer air exhaust on the upper sides. Natural ventilation has advantages like energy savings, no need for ducts or machinery, more natural light, lower maintenance costs, and potential health benefits compared to mechanical ventilation. Factors like wind direction, building orientation, topography, vegetation and the size and placement of openings need to be considered for effective
Ventilation
Ventilation is the intentional movement of air into and out of a building. It provides acceptable indoor air quality by removing odors and delivering fresh air either naturally through forces like wind and stack effect, or mechanically. Standards for ventilation are based on factors like floor area, cubic footage of air per person, and recommended air changes per hour. Proper ventilation is important for thermal comfort, indoor air quality, and health.
Ventilation and health in english
THIS PPT EXPLAINS TETANUS IN EASY WAY Important links- NOTES- https://mynursingstudents.blogspot.com/ youtube channel https://www.youtube.com/c/MYSTUDENTSU... CHANEL PLAYLIST- ANATOMY AND PHYSIOLOGY-https://www.youtube.com/playlist?list... COMMUNITY HEALTH NURSING- https://www.youtube.com/playlist?list... CHILD HEALTH NURSING- https://www.youtube.com/playlist?list... FIRST AID- https://www.youtube.com/playlist?list... HCM- https://www.youtube.com/playlist?list... FUNDAMENTALS OF NURSING- https://www.youtube.com/playlist?list... COMMUNICABLE DISEASES- https://www.youtube.com/playlist?list... ENVIRONMENTAL HEALTH- https://www.youtube.com/playlist?list... MSN- https://www.youtube.com/playlist?list... HINDI ONLY- https://www.youtube.com/playlist?list... ENGLISH ONLY- https://www.youtube.com/playlist?list... facebook profile- https://www.facebook.com/suresh.kr.lrhs/ FACEBOOK PAGE- https://www.facebook.com/My-Student-S... facebook group NURSING NOTES- https://www.facebook.com/groups/24139... FOR MAKING EASY NOTES YOU CAN ALSO VISIT MY BLOG – BLOGGER- https://mynursingstudents.blogspot.com/ Instagram- https://www.instagram.com/mystudentsu... Twitter- https://twitter.com/student_system?s=08 #TPR,#FEVER,#PRIMARY, #SECONDARY,#TERTIARY PREVENTION#Prevention_COMMUNICABLE_DISEASES,#breaking_CHAIN_OF_INFECTION,#PORTAL_OF_EXIT, #PORTAL_OF_ENTRY, #AGENT, #HOST, #CASE, #CARRIER, #NIDDCP,#NATIONALHELATHPROGRAM,S#MYSTUDENTSUPPORTSYSTEM, #rashes,#nursingclasses, #communityhealthnursing,#ANM, #GNM, #BSCNURING,#NURSINGSTUDENTS, #WHO,#NURSINGINSTITUTION,#COLLEGEOFNURSING,#nursingofficer,#COMMUNITYHEALTHOFFICER
Building services 2 final (final)
This document provides information about a group project for a building services course. It includes an introduction to the One City mixed development project in Kuala Lumpur and lists the group members working on the project. The group will analyze different building systems in the development, including air conditioning, vertical transportation, fire protection, electrical supply, and will conclude with references. Key areas to be examined are the mechanical ventilation and air conditioning systems, types of elevators and escalators used, and safety features of the vertical transportation. Problems with insufficient cooling and ventilation in some areas are also identified.
Artificialventilation
Artificial ventilation involves using mechanical fans and systems to drive stale interior air outside and bring fresh air inside. There are three main types: supply ventilation which pressurizes interior spaces, exhaust ventilation which depressurizes, and balanced ventilation which maintains pressure equilibrium. Balanced ventilation includes heat and energy recovery systems. Artificial ventilation provides controlled air exchange and distribution without introducing outdoor pollutants. However, faulty systems can impact health and quality systems are expensive. A case study of Cundall offices showed how artificial and natural ventilation can be integrated harmoniously in a thermally active building.
Air distribution system design and indoor air quality comfort and health
The document discusses the design of air distribution systems and indoor air quality. It describes different types of duct systems including trunk and branch, spider, radial, and perimeter loop. Properly designed ducts are important for occupant comfort, efficient heating and cooling, and indoor air quality. Poor duct design can lead to imbalanced air flow and temperatures. Good indoor air quality depends on controlling pollutant sources, adequate ventilation, and humidity levels.
ventilation in building
The document discusses various methods of ventilation in buildings, including natural ventilation, mechanical ventilation, and hybrid/mixed-mode ventilation. Natural ventilation uses wind and temperature differences to move fresh air through buildings without mechanical fans. Mechanical ventilation uses fans to force air through ducts. Hybrid ventilation combines natural and mechanical methods. The document also describes specific ventilation system types like task ventilation, constant air volume, and variable air volume systems. It discusses the importance of ventilation for occupant health and comfort.
hvac systems.pptx
This document discusses various aspects of ventilation systems for buildings, including: natural ventilation using wind and convection without fans; mechanical ventilation using fans to move air; and interior design implications of ventilation. It covers components like air sources, means to move air through spaces and control airflow, and exhausting contaminated air. Factors that influence natural airflow and techniques like comfort ventilation are also examined.
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
More Related Content
Similar to VENTILATION_IN_BUILDINGS_1650891110788.pptx
Ventilation - Air movement
This document discusses ventilation and air movement in buildings. It covers natural ventilation strategies like wind patterns, opening positions and sizes, and stack effect. Cross ventilation and the venturi effect are explained as ways to induce air flow. Maintaining indoor air quality by supplying fresh air and removing pollutants requires careful ventilation design considering factors like wind direction, constrictions to increase speed, and opening placement and size. Various techniques are presented, like wind scoops, jets and tunnels, to study air movement and optimize ventilation performance in buildings.
Lecture 4 natural ventilation
Natural ventilation utilizes stack effect and wind pressure to supply outdoor air into buildings for ventilation and cooling without fans or mechanical systems. It reduces energy consumption for air conditioning. Key concepts include an airtight building envelope with operable windows and exhaust units located high with intakes low to facilitate airflow. Benefits include reduced costs and energy usage while providing thermal comfort, though effectiveness varies with outdoor conditions. Application requires considering factors like prevailing winds, vegetation, inlet/outlet placement and sizing.
Ventilation system
This document discusses ventilation requirements and systems. It defines ventilation as changing the air in an enclosed space to provide fresh air for respiration and control factors like carbon dioxide, moisture, heat, and odors. Ventilation requirements vary by building usage but are often measured in air changes per hour. Systems can be natural (using airflow without fans) or mechanical (using ducts and fans). Natural ventilation provides benefits like improved indoor air quality but requires proper building design. Mechanical systems provide more air flow control and constant fresh air intake. Common mechanical systems include natural inlet/mechanical exhaust, mechanical inlet/natural exhaust, and fully mechanical. The document also discusses fan types, air filters, and design considerations to minimize mechanical ventilation needs.
ventilation-160317023710.pptx
Building ventilation involves introducing outdoor air into indoor spaces to provide healthy air and remove pollutants. There are three main methods: natural ventilation which relies on wind and buoyancy forces, mechanical ventilation which uses fans, and hybrid/mixed-mode ventilation which combines natural and mechanical methods. Natural ventilation works through cross ventilation driven by wind pressure differences or stack ventilation using warmer air rising, while mechanical ventilation is needed when natural forces are insufficient. Hybrid ventilation uses mechanical fans to supplement natural ventilation when flow rates are too low.
Forced Draft Ventilation
This document discusses different methods of ventilation for buildings, including forced/mechanical ventilation and natural ventilation. Forced ventilation uses fans and ductwork to exchange indoor air with outside air or circulate air within a building to control temperature, humidity, and air quality. Natural ventilation relies on operable windows, vents, and stack effect to move air without mechanical systems. Proper ventilation is important for maintaining indoor comfort and air quality in various building types like industrial facilities, commercial buildings, and homes.
Ventilation.pptx
This document discusses different types of ventilation for buildings. It defines ventilation as replacing or circulating air to provide good indoor air quality. The main types discussed are natural ventilation, mechanical ventilation, and hybrid/mixed-mode ventilation. Natural ventilation uses openings to allow air flow via pressure differences without fans. Mechanical ventilation uses powered fans or blowers. Hybrid systems allow controlled introduction of outdoor air using both mechanical and passive means. The document also outlines purposes of ventilation like maintaining comfort, removing odors and contaminants, and creating air movement.
Passive cooling
Passive cooling refers to techniques used to cool buildings without energy consumption, such as those used in passive house designs. Passive cooling aims to slow heat transfer into buildings and remove unwanted heat through principles of physics like shading, natural ventilation strategies like stack ventilation and cross ventilation, evaporative cooling, and using thermal mass materials. Some key passive cooling techniques discussed are shading, natural ventilation methods, night ventilation to pre-cool buildings, evaporative cooling, desiccant cooling, and underground cooling pipes or storage chambers.
passivecooling-130703193354-phpapp02.pdf
Passive cooling refers to techniques used to cool buildings without energy consumption, such as those in passive house design. Passive cooling aims to slow heat transfer into buildings and remove unwanted heat through principles of physics like shading, natural ventilation strategies like stack effect and cross ventilation, evaporative cooling, and using thermal mass. Effective passive cooling provides indoor comfort while having low maintenance and energy consumption.
Ventilation System
This document discusses ventilation systems and strategies. It begins by explaining the need for ventilation in buildings to remove stale air and bring in fresh air. It then describes different types of ventilation systems including natural ventilation, mechanical ventilation, exhaust ventilation, supply ventilation, balanced ventilation, and energy recovery systems. The document also discusses air conditioning systems like window units, split units, centralized units, and packaged units. It covers the components and cycles of air conditioning systems. Green roofs are also summarized, including their benefits like reducing temperatures and providing stormwater management. Design standards and factors for green roofs are briefly mentioned.
Basics of ventilation by jj
The document discusses different types of ventilation systems. Natural ventilation uses natural forces like wind and stack effect to circulate air without mechanical systems. Forced ventilation uses fans and blowers to provide ventilation when natural forces are insufficient. Hybrid ventilation relies primarily on natural ventilation but uses mechanical systems to supplement airflow when needed. Evaporative cooling is also discussed, which uses the evaporation of water to lower air temperature in a cost-effective way. Different fans and their applications are outlined. Two-stage evaporative cooling units that provide initial indirect evaporative cooling before direct cooling are described.
Natural ventilation
Natural ventilation uses natural forces like wind and buoyancy to introduce fresh air into buildings. It ventilates spaces by providing oxygen, diluting contaminants, and promoting air movement for comfort. There are three main natural ventilation methods: single-sided ventilation using only openings on one wall, cross-ventilation using openings on opposite walls, and stack effect using cooler air intake on the lower sides and warmer air exhaust on the upper sides. Natural ventilation has advantages like energy savings, no need for ducts or machinery, more natural light, lower maintenance costs, and potential health benefits compared to mechanical ventilation. Factors like wind direction, building orientation, topography, vegetation and the size and placement of openings need to be considered for effective
Ventilation
Ventilation is the intentional movement of air into and out of a building. It provides acceptable indoor air quality by removing odors and delivering fresh air either naturally through forces like wind and stack effect, or mechanically. Standards for ventilation are based on factors like floor area, cubic footage of air per person, and recommended air changes per hour. Proper ventilation is important for thermal comfort, indoor air quality, and health.
Ventilation and health in english
THIS PPT EXPLAINS TETANUS IN EASY WAY Important links- NOTES- https://mynursingstudents.blogspot.com/ youtube channel https://www.youtube.com/c/MYSTUDENTSU... CHANEL PLAYLIST- ANATOMY AND PHYSIOLOGY-https://www.youtube.com/playlist?list... COMMUNITY HEALTH NURSING- https://www.youtube.com/playlist?list... CHILD HEALTH NURSING- https://www.youtube.com/playlist?list... FIRST AID- https://www.youtube.com/playlist?list... HCM- https://www.youtube.com/playlist?list... FUNDAMENTALS OF NURSING- https://www.youtube.com/playlist?list... COMMUNICABLE DISEASES- https://www.youtube.com/playlist?list... ENVIRONMENTAL HEALTH- https://www.youtube.com/playlist?list... MSN- https://www.youtube.com/playlist?list... HINDI ONLY- https://www.youtube.com/playlist?list... ENGLISH ONLY- https://www.youtube.com/playlist?list... facebook profile- https://www.facebook.com/suresh.kr.lrhs/ FACEBOOK PAGE- https://www.facebook.com/My-Student-S... facebook group NURSING NOTES- https://www.facebook.com/groups/24139... FOR MAKING EASY NOTES YOU CAN ALSO VISIT MY BLOG – BLOGGER- https://mynursingstudents.blogspot.com/ Instagram- https://www.instagram.com/mystudentsu... Twitter- https://twitter.com/student_system?s=08 #TPR,#FEVER,#PRIMARY, #SECONDARY,#TERTIARY PREVENTION#Prevention_COMMUNICABLE_DISEASES,#breaking_CHAIN_OF_INFECTION,#PORTAL_OF_EXIT, #PORTAL_OF_ENTRY, #AGENT, #HOST, #CASE, #CARRIER, #NIDDCP,#NATIONALHELATHPROGRAM,S#MYSTUDENTSUPPORTSYSTEM, #rashes,#nursingclasses, #communityhealthnursing,#ANM, #GNM, #BSCNURING,#NURSINGSTUDENTS, #WHO,#NURSINGINSTITUTION,#COLLEGEOFNURSING,#nursingofficer,#COMMUNITYHEALTHOFFICER
Building services 2 final (final)
This document provides information about a group project for a building services course. It includes an introduction to the One City mixed development project in Kuala Lumpur and lists the group members working on the project. The group will analyze different building systems in the development, including air conditioning, vertical transportation, fire protection, electrical supply, and will conclude with references. Key areas to be examined are the mechanical ventilation and air conditioning systems, types of elevators and escalators used, and safety features of the vertical transportation. Problems with insufficient cooling and ventilation in some areas are also identified.
Artificialventilation
Artificial ventilation involves using mechanical fans and systems to drive stale interior air outside and bring fresh air inside. There are three main types: supply ventilation which pressurizes interior spaces, exhaust ventilation which depressurizes, and balanced ventilation which maintains pressure equilibrium. Balanced ventilation includes heat and energy recovery systems. Artificial ventilation provides controlled air exchange and distribution without introducing outdoor pollutants. However, faulty systems can impact health and quality systems are expensive. A case study of Cundall offices showed how artificial and natural ventilation can be integrated harmoniously in a thermally active building.
Air distribution system design and indoor air quality comfort and health
The document discusses the design of air distribution systems and indoor air quality. It describes different types of duct systems including trunk and branch, spider, radial, and perimeter loop. Properly designed ducts are important for occupant comfort, efficient heating and cooling, and indoor air quality. Poor duct design can lead to imbalanced air flow and temperatures. Good indoor air quality depends on controlling pollutant sources, adequate ventilation, and humidity levels.
ventilation in building
The document discusses various methods of ventilation in buildings, including natural ventilation, mechanical ventilation, and hybrid/mixed-mode ventilation. Natural ventilation uses wind and temperature differences to move fresh air through buildings without mechanical fans. Mechanical ventilation uses fans to force air through ducts. Hybrid ventilation combines natural and mechanical methods. The document also describes specific ventilation system types like task ventilation, constant air volume, and variable air volume systems. It discusses the importance of ventilation for occupant health and comfort.
hvac systems.pptx
This document discusses various aspects of ventilation systems for buildings, including: natural ventilation using wind and convection without fans; mechanical ventilation using fans to move air; and interior design implications of ventilation. It covers components like air sources, means to move air through spaces and control airflow, and exhausting contaminated air. Factors that influence natural airflow and techniques like comfort ventilation are also examined.
Similar to VENTILATION_IN_BUILDINGS_1650891110788.pptx (20)
Air distribution system design and indoor air quality comfort and health
Air distribution system design and indoor air quality comfort and health
Recently uploaded
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Recently uploaded (20)
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
VENTILATION_IN_BUILDINGS_1650891110788.pptx
- 2. Ventilation Ventilation refers to the process of circulating air in a specific area or space, usually to improve the quality of the air or to remove unwanted substances from it. ventilation systems can be natural or mechanical, and they serve various purposes, such as providing fresh air, removing odors, reducing humidity, and removing pollutants.
- 3. TYPES OF VENTILATION SYSTEMS
- 4. WAYS BY WHICH BUILDINGS ARE NATURALLY VENTILATED Single Sided Ventilation Cross Ventilation Stack Effect Reverse Stack Effect
- 6. SINGLE SIDED VENTILATION Single sided ventilation is the use of openings on one side of a building. This is used to naturally ventilate the space of projects with limited area. Single sided ventilation systems are also used in projects where cross ventilation cannot be provided, due to structural or environmental constraints. Keep in mind though that this type of ventilation generates the least air circulation when it comes to natural ventilation systems.
- 8. CROSS VENTILATION Greater air flow can be achieved when windows/vents can be opened on different facades to allow air flow through a room. This can also include layouts where cross ventilation occurs by air entering through the external façade, traveling across the floor plate to a central atrium where it is exhausted up and out through vents at roof level. It is generally recommended that cross ventilation flows should not exceed 15m or 5x floor to ceiling height (whichever is the smallest) as it is known that air pollutants become more concentrated at the leeward side of the room, where the air exhausts, compared to the windward side where outside air enters the room.