VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum melongena L.)
•
1 like•22 views
Based on the study of various traits in brinjal genotypes, the researchers recommend selecting for number of fruits per plant and single fruit weight to improve yield. The best performing genotype was found to be Line-01× Line-25F2, as it had the highest single fruit weight and yield per plant. Additionally, the genotypes Line-01× Line-25F1 and Line-23× Line-24F2 produced relatively high yields, while Line-23× Line-24F2 was the earliest to flower and harvest.
Report
Share
Report
Share
Download to read offline
Recommended
P.52 56 summary
An experiment was conducted to evaluate variability and exploit genetics in 12 brinjal genotypes. Significant variability was found for traits like plant height, number of branches, fruit characteristics, and yield. High heritability and genetic advance were observed for most traits, indicating selection would be effective. Number of fruits per plant and single fruit weight had the strongest positive impact on yield and the highest genetic correlations. The genotypes Line-01×Line-25F2 and Line-23×Line-24F2 showed the best performance for yield and other traits. Further crosses are recommended to combine traits like early flowering and harvesting, large single fruits, and high fruit number.
Archives Of Agronomy Soil Science (49) 333 345
This document summarizes a survey of yield differences between transgenic and non-transgenic crops. The survey found no clear evidence that genetically modified (GM) crops yield more than conventionally bred crops. Additionally, there were no valid comparative trials of yield. The document then discusses GM crop technology and conventional plant breeding methods, highlighting the importance of hybrid vigor and environmental factors for plant breeding. Conventional breeding aims to combine desirable genes from two parents to produce hybrid crops with increased yields, while GM crops contain foreign genes inserted from other organisms.
Genetical engineering
The document discusses genetically modified organisms (GMOs) and provides several key facts and figures:
1) Only four countries - the United States, Argentina, Canada, and China - grow almost 90% of the world's GM crops. The vast majority of other countries grow no GMOs.
2) Only four main crops - soy, maize, cotton, and oil-seed rape - make up over 99% of GMOs grown, with herbicide tolerance and insect resistance being the dominant traits.
3) Critics are concerned that genetic engineering may have unintended health and environmental impacts, as it allows for novel genetic combinations not possible through natural breeding.
Parthenocarpy
The document discusses parthenocarpy, which is the natural or artificial induction of fruit development without pollination and fertilization. It causes include male sterility, self-incompatibility, and adverse environmental conditions. Fruit and seed development is controlled by phytohormones like GA3, auxins, and cytokinins. Parthenocarpy is important for increased production, seedless fruits, and off-season production. It can be genetic/natural or artificially induced. Various breeding approaches like interspecific hybridization and application of plant growth regulators can induce parthenocarpy. Parthenocarpic traits in crops like tomato are controlled by incomplete dominant genes.
Pedigree method
The pedigree method is a popular technique for developing pure lines of self-pollinated crops. It involves keeping detailed records during inbreeding to select plants with desirable traits. Early generations focus on high heritability traits, while later generations evaluate low heritability traits. This method is useful for improving yield and quality in established varieties. However, it is time-consuming and labor-intensive due to the extensive record keeping required.
Evaluation of Grain Cowpea for Protein and its Inheritance in Anyigba, Kogi S...
Three cowpea lines are selected based on their percent crude protein and used as parents in crosses in the following Combinations: Sampea-6 (High): IT825-124 (Low); sampea-6 (High) x T89KD-286(Low) and I7825-124 (Low) x 1789KD-288 (Low). In the first cross, the following generations were obtained in addition to the parental reciprocals F1s, reciprocal backcrosses and F2 in the remaining two crosses. Only the reciprocal F1s and F2 population were obtained in addition to the Parental. The F1 means of per cent crude protein content were either closer to or lower than the low protein parent, thus indicating partial dominance to over dominance of low protein over high. No Significant differences were observed between reciprocal F1’s, indicating the absence of maternal effects. The F2 distributions for percent protein were normal, suggesting the involvement of multiple genes, thus supporting the estimate of three major genes with possible modifiers. Broad-sense heritability estimates ranged from 40.77 to 73.4% in the crosses low x low protein to high x low protein. Narrow-sense heritability estimates ranged from 26.8 to 40% in the crosses low x low protein to high x low protein. These estimates indicate considerable genetic influence, some of which were additive. In all crosses, negative phenotypic and genotypic correlations predominated for yield, numbers of seeds/pod and number of days to flowering with per cent protein. Significant negative phenotypic correlations were obtained between numbers of pods/plant and per cent protein while, 100-seed weight showed mostly positive phenotypic and genotypic correlations with per cent protein. Positive correlations predominated between days to maturity and per cent protein. Some high yielding segregants had high protein percentage, suggesting that high yield and high protein percentage can be combined into a suitable genotype most especially with the weak negative correlations between these characters.
Heterosis breeding in horticultural crops
Heterosis, also called hybrid vigor, refers to the superiority of F1 hybrids over their parents in terms of traits like yield, disease resistance, and vigor. It is caused by the combination of favorable genes from parents during crossing. Two hypotheses have been proposed to explain the genetic basis of heterosis: the dominance hypothesis and overdominance hypothesis. Heterosis is classified into true heterosis (euheterosis) involving mutational or balanced heterosis, and pseudoheterosis. Several studies in crops like marigold, petunia, tomato, and brinjal have observed high heterosis for traits like flower size, yield, and fruit characteristics through specific hybrid combinations.
Three line system of hybrid seed production
The document describes a three line system of hybrid seed production. It involves an A line that is male sterile, a B line that is fertile and maintains the same nucleus as the A line but with different cytoplasm, and an R line that can restore male fertility in the A line. When the A line is crossed with the B line, it produces a first generation hybrid that is heterozygous. The R line is then used to restore male fertility in the A line for large-scale seed production without needing extra parent lines. Key requirements for successful hybrid seed production using this system include selecting appropriate locations, seed fields, isolation, and cultural practices.
Recommended
P.52 56 summary
An experiment was conducted to evaluate variability and exploit genetics in 12 brinjal genotypes. Significant variability was found for traits like plant height, number of branches, fruit characteristics, and yield. High heritability and genetic advance were observed for most traits, indicating selection would be effective. Number of fruits per plant and single fruit weight had the strongest positive impact on yield and the highest genetic correlations. The genotypes Line-01×Line-25F2 and Line-23×Line-24F2 showed the best performance for yield and other traits. Further crosses are recommended to combine traits like early flowering and harvesting, large single fruits, and high fruit number.
Archives Of Agronomy Soil Science (49) 333 345
This document summarizes a survey of yield differences between transgenic and non-transgenic crops. The survey found no clear evidence that genetically modified (GM) crops yield more than conventionally bred crops. Additionally, there were no valid comparative trials of yield. The document then discusses GM crop technology and conventional plant breeding methods, highlighting the importance of hybrid vigor and environmental factors for plant breeding. Conventional breeding aims to combine desirable genes from two parents to produce hybrid crops with increased yields, while GM crops contain foreign genes inserted from other organisms.
Genetical engineering
The document discusses genetically modified organisms (GMOs) and provides several key facts and figures:
1) Only four countries - the United States, Argentina, Canada, and China - grow almost 90% of the world's GM crops. The vast majority of other countries grow no GMOs.
2) Only four main crops - soy, maize, cotton, and oil-seed rape - make up over 99% of GMOs grown, with herbicide tolerance and insect resistance being the dominant traits.
3) Critics are concerned that genetic engineering may have unintended health and environmental impacts, as it allows for novel genetic combinations not possible through natural breeding.
Parthenocarpy
The document discusses parthenocarpy, which is the natural or artificial induction of fruit development without pollination and fertilization. It causes include male sterility, self-incompatibility, and adverse environmental conditions. Fruit and seed development is controlled by phytohormones like GA3, auxins, and cytokinins. Parthenocarpy is important for increased production, seedless fruits, and off-season production. It can be genetic/natural or artificially induced. Various breeding approaches like interspecific hybridization and application of plant growth regulators can induce parthenocarpy. Parthenocarpic traits in crops like tomato are controlled by incomplete dominant genes.
Pedigree method
The pedigree method is a popular technique for developing pure lines of self-pollinated crops. It involves keeping detailed records during inbreeding to select plants with desirable traits. Early generations focus on high heritability traits, while later generations evaluate low heritability traits. This method is useful for improving yield and quality in established varieties. However, it is time-consuming and labor-intensive due to the extensive record keeping required.
Evaluation of Grain Cowpea for Protein and its Inheritance in Anyigba, Kogi S...
Three cowpea lines are selected based on their percent crude protein and used as parents in crosses in the following Combinations: Sampea-6 (High): IT825-124 (Low); sampea-6 (High) x T89KD-286(Low) and I7825-124 (Low) x 1789KD-288 (Low). In the first cross, the following generations were obtained in addition to the parental reciprocals F1s, reciprocal backcrosses and F2 in the remaining two crosses. Only the reciprocal F1s and F2 population were obtained in addition to the Parental. The F1 means of per cent crude protein content were either closer to or lower than the low protein parent, thus indicating partial dominance to over dominance of low protein over high. No Significant differences were observed between reciprocal F1’s, indicating the absence of maternal effects. The F2 distributions for percent protein were normal, suggesting the involvement of multiple genes, thus supporting the estimate of three major genes with possible modifiers. Broad-sense heritability estimates ranged from 40.77 to 73.4% in the crosses low x low protein to high x low protein. Narrow-sense heritability estimates ranged from 26.8 to 40% in the crosses low x low protein to high x low protein. These estimates indicate considerable genetic influence, some of which were additive. In all crosses, negative phenotypic and genotypic correlations predominated for yield, numbers of seeds/pod and number of days to flowering with per cent protein. Significant negative phenotypic correlations were obtained between numbers of pods/plant and per cent protein while, 100-seed weight showed mostly positive phenotypic and genotypic correlations with per cent protein. Positive correlations predominated between days to maturity and per cent protein. Some high yielding segregants had high protein percentage, suggesting that high yield and high protein percentage can be combined into a suitable genotype most especially with the weak negative correlations between these characters.
Heterosis breeding in horticultural crops
Heterosis, also called hybrid vigor, refers to the superiority of F1 hybrids over their parents in terms of traits like yield, disease resistance, and vigor. It is caused by the combination of favorable genes from parents during crossing. Two hypotheses have been proposed to explain the genetic basis of heterosis: the dominance hypothesis and overdominance hypothesis. Heterosis is classified into true heterosis (euheterosis) involving mutational or balanced heterosis, and pseudoheterosis. Several studies in crops like marigold, petunia, tomato, and brinjal have observed high heterosis for traits like flower size, yield, and fruit characteristics through specific hybrid combinations.
Three line system of hybrid seed production
The document describes a three line system of hybrid seed production. It involves an A line that is male sterile, a B line that is fertile and maintains the same nucleus as the A line but with different cytoplasm, and an R line that can restore male fertility in the A line. When the A line is crossed with the B line, it produces a first generation hybrid that is heterozygous. The R line is then used to restore male fertility in the A line for large-scale seed production without needing extra parent lines. Key requirements for successful hybrid seed production using this system include selecting appropriate locations, seed fields, isolation, and cultural practices.
Parthenocarpy
This document provides an overview of parthenocarpy in vegetables. It defines parthenocarpy as fruit development without fertilization. The importance of parthenocarpy for increased production and quality is discussed. Different approaches for inducing parthenocarpy are described, including breeding methods, application of plant growth regulators, and transgenic techniques. Specific details are given on parthenocarpic research in tomato, cucumber, brinjal, and capsicum. Key findings and developments in parthenocarpic varieties and lines for various vegetable crops are summarized.
Heterosis in bottle gourd [lagenaria siceraria (mol.) standl.]
This study evaluated heterosis for yield and yield traits in bottle gourd hybrids. Twenty-eight F1 hybrids were evaluated along with eight parental lines. Heterosis over the mid-parent and standard check was estimated for 16 quantitative traits. Several hybrids showed significant positive heterosis for traits like fruit yield per vine, average fruit weight, and number of fruits per plant. The highest heterosis for fruit yield per vine was observed in the hybrid Aditi X PSPL, with 68.5% heterosis over the standard check. Positive heterosis was also observed for traits related to fruit quality and plant growth. The results identified hybrids with improved yield and suggest that heterosis breeding can help increase bottle g
HANDLING OF SEGREGATING GENERATIONS
In this presentation you will come to know about the HANDLING OF SEGREGATING GENERATIONS, that is (PEDIGREE METHOD, MASS PEDIGREE METHOD, BULK METHOD, SINGLE SEED DESCENT METHOD).
Presentation on pedigree method of breeding
1. The document discusses pedigree analysis and various plant breeding methods such as pedigree selection, bulk population breeding, and backcross breeding.
2. It describes the procedure from hybridization of parental plants to generating F1, F2, and subsequent advanced filial generations, conducting yield trials, and ultimately releasing a new variety.
3. Modifications to the traditional pedigree method are suggested to improve selection for competitive ability and identity of selected plants, such as raising populations under both spaced and drilled conditions starting from F2.
Pedigree Selection
The document discusses the pedigree selection method for plant breeding. It begins by explaining that the pedigree method was first outlined in 1927 and involves selecting individual plants from segregating generations and recording their progeny relationships until homozygosity is reached.
It then notes that a pedigree record details the relationships between selected plants and their progeny, and is helpful for determining genetic relatedness. The pedigree method is commonly used for self-pollinated crops to select for specific traits like disease resistance over multiple generations. While it is effective for simply inherited traits and faster than bulk methods, maintaining accurate pedigree records takes time and skill from breeders.
Presentation on Alien Addition Line
Wide hybridization is a technique used to transfer agriculturally important traits from alien species to cultivated plants. It allows for greater genetic variability but can be hampered by issues like poor crossability and hybrid sterility. These barriers have been overcome through techniques like the use of growth hormones, improved culture conditions, chromosome doubling, and bridge crosses. Alien addition lines carry one chromosome pair from another species in addition to the parent species' normal chromosomes. They allow for the transfer of traits like disease resistance while limiting the introduction of undesirable genes. Alien addition lines have been developed in several important crop species like wheat and tobacco.
Wide cross hybridization
Distant hybridization involves crossing genetically dissimilar plant species and can be used to transfer beneficial traits between species. It faces numerous barriers at the stigma, stylar, and post-fertilization stages. Techniques like embryo rescue, growth regulators, and ploidy manipulation can help overcome these barriers. Successful distant hybrids include triticale, disease-resistant additions and substitutions in crops, and new varieties with biotic or abiotic stress tolerance from wild relatives. While powerful for crop improvement, distant hybridization also has limitations like sterility and linkage drag that must be addressed.
10. methods & problems in seed production
This document discusses different methods of hybrid seed production in vegetable crops, including hand emasculation and pollination, male sterility systems, self-incompatibility, and gynoecism. It provides details on the principles, techniques, advantages, and limitations of each method. Cytoplasmic, genic, and cytoplasmic-genic male sterility systems as well as environmental genic male sterility and chemically induced male sterility are described. Gametophytic and sporophytic self-incompatibility systems are also explained. Hybrid seed production methods including single cross, double cross, and triple cross techniques are outlined.
Problems in seed production pgs-504
This document discusses various methods of hybrid seed production in vegetable crops, including their principles, advantages, and limitations. It covers hand emasculation and pollination, male sterility systems like cytoplasmic male sterility, genic male sterility, cytoplasmic-genic male sterility, and environmental genic male sterility. It also discusses methods like self-incompatibility, chemically induced male sterility, and their characteristics. The document provides details on the mechanisms, commercially exploited crops, and maintenance of different male sterility systems to facilitate large-scale, low-cost hybrid seed production.
Back Cross Breeding Method
it is most important breeding method useful for transfer of dominant and recessive genes. helps to develop RILs and NILs
Breeding methods in cross pollinated crops
OVERVIEW OF DIFFERENT BREEDING METHODS IN CROSSPOLLINATED CROPS. MASS SELECTION, PROGENY SELECTION METHODS THIER MODIFICATIONS MERITS AND DEMERITS
Bulk Breeding Method
it is also one of the breeding method in which bulking done for several generation i.e upto 6 generation, selection will start after F6 generation
Pedigree Breeding Method
It is method helps for handling segregation population , and maintain the population record for every generation, which helps breeders to select lines and know the pedigree information regarding lines
18. synthetics and composites
1) A synthetic variety is developed by inter-crossing multiple good inbred lines and mixing their F1 seeds. It partially exploits heterosis through open pollination over generations.
2) Synthetic varieties are developed to exploit heterosis and additive gene effects. They have wider adaptability than hybrids due to genetic diversity.
3) A synthetic variety initially consists of many heterozygotes, but some homozygosity is fixed over generations through self-pollination. Later generations consist of both heterozygotes and homozygotes.
Backcross Breeding Method
Backcross breeding is a method used to transfer one or few desirable traits from a donor parent to a recurrent parent with otherwise good qualities. It involves crossing a hybrid plant with one of its parents and selecting progeny that resemble the recurrent parent for further backcrossing. This helps recover most of the recurrent parent's genome while introducing the desired trait. Marker-assisted backcrossing can improve efficiency by selecting against donor genome regions outside the target locus and choosing rare recombinants near the target gene. The objective is to develop an improved variety like the recurrent parent but with the trait from the donor parent.
Distant hybridization
Distant hybridization involves crossing individuals from different plant species or genera. It has been used to transfer desirable traits like disease resistance between crops. Some key challenges include hybrid sterility and incompatible crosses due to genetic differences between parental species. Techniques like embryo rescue and colchicine treatment have helped produce new crops through wide crosses, such as Nerica rice and triticale wheat-rye hybrids. Distant hybridization remains limited by barriers like hybrid breakdown but has achieved successes in improving crop varieties.
Cross the Best with the Best, and Select the Best: HELP in Breeding Selfing ...
Hybrid-enabled line profiling (HELP) is a new
integrated breeding strategy for self-fertilizing crops that combines existing and recently identified elements, resulting in a strategy that synergistically exceeds existing breeding concepts.
Wide hybridization
This document discusses wide hybridization or distant hybridization in maize. It begins by defining hybridization and distant hybridization. It then discusses the history of important wide crosses done in crops. Some key points made include:
- Thomas Fairchild produced the first wide cross between carnation and sweet william in 1717.
- Karpechenko produced the intergeneric hybrid Raphanobrassica in 1928.
- Rimpu produced the first intergeneric hybrid triticale in 1890, which had greater potential than Raphanobrassica.
- Problems with wide crosses include cross incompatibility, hybrid inviability, hybrid sterility, and hybrid breakdown.
- Wild relatives of maize like
Distant Hybridization: An Introduction
This document provides an introduction to distant hybridization, which involves crossing individuals from different plant species or genera. It discusses the history of distant hybridization, features such as hybrid fertility levels, and barriers like cross incompatibility and hybrid sterility. Techniques for overcoming these barriers are described, such as embryo rescue and chromosome doubling. The roles of distant hybridization in crop improvement through traits like disease resistance are explained. Limitations and achievements in producing new varieties through distant hybridization are also summarized.
Handling of segregating generations -Backcross breeding
Genetic basis, recurrent, donor parent, linkage drag,procedure,dominant gene transfer, recessive gene transfer,stepwise, simultaneous transfer, application, merits, demerits,examples
Selection possibilities for seed content fresh fruit quality in guava j. ap...
This document analyzes genetic variability in seed characteristics of 68 guava genotypes. It finds highly significant differences among genotypes for fruit weight and seed traits. A wide range of variation was observed for pulp to seed weight ratio (17.10 to 5905.31) and number of seeds per fruit (2 to 463). High genetic coefficient of variation and heritability estimates were found for pulp to seed weight ratio, 100-seed weight, and number of seeds per fruit, indicating these traits are influenced by additive genes and effective selection is possible. The study identifies pulp to seed weight ratio, number of seeds per fruit, and 100-seed weight as promising traits for guava breeding to develop varieties with fewer and softer seeds.
A Survey of Yield Differences Between Transgenic and Non-Transgenic Crops
This document summarizes findings from a survey of yield differences between transgenic and non-transgenic crops. The survey found no clear evidence that GM crops yield more than conventionally bred crops due to a lack of valid comparative trials. GM crops are derived from a single parent and carry one or few transferred genes, whereas conventional crops benefit from hybrid vigor through crossing varieties. The document goes on to describe methods of plant breeding, including traditional, Mendelian, and Isolection breeding, and compares these proven methods to GM technology which aims to transfer genes via cell bombardment.
More Related Content
What's hot
Parthenocarpy
This document provides an overview of parthenocarpy in vegetables. It defines parthenocarpy as fruit development without fertilization. The importance of parthenocarpy for increased production and quality is discussed. Different approaches for inducing parthenocarpy are described, including breeding methods, application of plant growth regulators, and transgenic techniques. Specific details are given on parthenocarpic research in tomato, cucumber, brinjal, and capsicum. Key findings and developments in parthenocarpic varieties and lines for various vegetable crops are summarized.
Heterosis in bottle gourd [lagenaria siceraria (mol.) standl.]
This study evaluated heterosis for yield and yield traits in bottle gourd hybrids. Twenty-eight F1 hybrids were evaluated along with eight parental lines. Heterosis over the mid-parent and standard check was estimated for 16 quantitative traits. Several hybrids showed significant positive heterosis for traits like fruit yield per vine, average fruit weight, and number of fruits per plant. The highest heterosis for fruit yield per vine was observed in the hybrid Aditi X PSPL, with 68.5% heterosis over the standard check. Positive heterosis was also observed for traits related to fruit quality and plant growth. The results identified hybrids with improved yield and suggest that heterosis breeding can help increase bottle g
HANDLING OF SEGREGATING GENERATIONS
In this presentation you will come to know about the HANDLING OF SEGREGATING GENERATIONS, that is (PEDIGREE METHOD, MASS PEDIGREE METHOD, BULK METHOD, SINGLE SEED DESCENT METHOD).
Presentation on pedigree method of breeding
1. The document discusses pedigree analysis and various plant breeding methods such as pedigree selection, bulk population breeding, and backcross breeding.
2. It describes the procedure from hybridization of parental plants to generating F1, F2, and subsequent advanced filial generations, conducting yield trials, and ultimately releasing a new variety.
3. Modifications to the traditional pedigree method are suggested to improve selection for competitive ability and identity of selected plants, such as raising populations under both spaced and drilled conditions starting from F2.
Pedigree Selection
The document discusses the pedigree selection method for plant breeding. It begins by explaining that the pedigree method was first outlined in 1927 and involves selecting individual plants from segregating generations and recording their progeny relationships until homozygosity is reached.
It then notes that a pedigree record details the relationships between selected plants and their progeny, and is helpful for determining genetic relatedness. The pedigree method is commonly used for self-pollinated crops to select for specific traits like disease resistance over multiple generations. While it is effective for simply inherited traits and faster than bulk methods, maintaining accurate pedigree records takes time and skill from breeders.
Presentation on Alien Addition Line
Wide hybridization is a technique used to transfer agriculturally important traits from alien species to cultivated plants. It allows for greater genetic variability but can be hampered by issues like poor crossability and hybrid sterility. These barriers have been overcome through techniques like the use of growth hormones, improved culture conditions, chromosome doubling, and bridge crosses. Alien addition lines carry one chromosome pair from another species in addition to the parent species' normal chromosomes. They allow for the transfer of traits like disease resistance while limiting the introduction of undesirable genes. Alien addition lines have been developed in several important crop species like wheat and tobacco.
Wide cross hybridization
Distant hybridization involves crossing genetically dissimilar plant species and can be used to transfer beneficial traits between species. It faces numerous barriers at the stigma, stylar, and post-fertilization stages. Techniques like embryo rescue, growth regulators, and ploidy manipulation can help overcome these barriers. Successful distant hybrids include triticale, disease-resistant additions and substitutions in crops, and new varieties with biotic or abiotic stress tolerance from wild relatives. While powerful for crop improvement, distant hybridization also has limitations like sterility and linkage drag that must be addressed.
10. methods & problems in seed production
This document discusses different methods of hybrid seed production in vegetable crops, including hand emasculation and pollination, male sterility systems, self-incompatibility, and gynoecism. It provides details on the principles, techniques, advantages, and limitations of each method. Cytoplasmic, genic, and cytoplasmic-genic male sterility systems as well as environmental genic male sterility and chemically induced male sterility are described. Gametophytic and sporophytic self-incompatibility systems are also explained. Hybrid seed production methods including single cross, double cross, and triple cross techniques are outlined.
Problems in seed production pgs-504
This document discusses various methods of hybrid seed production in vegetable crops, including their principles, advantages, and limitations. It covers hand emasculation and pollination, male sterility systems like cytoplasmic male sterility, genic male sterility, cytoplasmic-genic male sterility, and environmental genic male sterility. It also discusses methods like self-incompatibility, chemically induced male sterility, and their characteristics. The document provides details on the mechanisms, commercially exploited crops, and maintenance of different male sterility systems to facilitate large-scale, low-cost hybrid seed production.
Back Cross Breeding Method
it is most important breeding method useful for transfer of dominant and recessive genes. helps to develop RILs and NILs
Breeding methods in cross pollinated crops
OVERVIEW OF DIFFERENT BREEDING METHODS IN CROSSPOLLINATED CROPS. MASS SELECTION, PROGENY SELECTION METHODS THIER MODIFICATIONS MERITS AND DEMERITS
Bulk Breeding Method
it is also one of the breeding method in which bulking done for several generation i.e upto 6 generation, selection will start after F6 generation
Pedigree Breeding Method
It is method helps for handling segregation population , and maintain the population record for every generation, which helps breeders to select lines and know the pedigree information regarding lines
18. synthetics and composites
1) A synthetic variety is developed by inter-crossing multiple good inbred lines and mixing their F1 seeds. It partially exploits heterosis through open pollination over generations.
2) Synthetic varieties are developed to exploit heterosis and additive gene effects. They have wider adaptability than hybrids due to genetic diversity.
3) A synthetic variety initially consists of many heterozygotes, but some homozygosity is fixed over generations through self-pollination. Later generations consist of both heterozygotes and homozygotes.
Backcross Breeding Method
Backcross breeding is a method used to transfer one or few desirable traits from a donor parent to a recurrent parent with otherwise good qualities. It involves crossing a hybrid plant with one of its parents and selecting progeny that resemble the recurrent parent for further backcrossing. This helps recover most of the recurrent parent's genome while introducing the desired trait. Marker-assisted backcrossing can improve efficiency by selecting against donor genome regions outside the target locus and choosing rare recombinants near the target gene. The objective is to develop an improved variety like the recurrent parent but with the trait from the donor parent.
Distant hybridization
Distant hybridization involves crossing individuals from different plant species or genera. It has been used to transfer desirable traits like disease resistance between crops. Some key challenges include hybrid sterility and incompatible crosses due to genetic differences between parental species. Techniques like embryo rescue and colchicine treatment have helped produce new crops through wide crosses, such as Nerica rice and triticale wheat-rye hybrids. Distant hybridization remains limited by barriers like hybrid breakdown but has achieved successes in improving crop varieties.
Cross the Best with the Best, and Select the Best: HELP in Breeding Selfing ...
Hybrid-enabled line profiling (HELP) is a new
integrated breeding strategy for self-fertilizing crops that combines existing and recently identified elements, resulting in a strategy that synergistically exceeds existing breeding concepts.
Wide hybridization
This document discusses wide hybridization or distant hybridization in maize. It begins by defining hybridization and distant hybridization. It then discusses the history of important wide crosses done in crops. Some key points made include:
- Thomas Fairchild produced the first wide cross between carnation and sweet william in 1717.
- Karpechenko produced the intergeneric hybrid Raphanobrassica in 1928.
- Rimpu produced the first intergeneric hybrid triticale in 1890, which had greater potential than Raphanobrassica.
- Problems with wide crosses include cross incompatibility, hybrid inviability, hybrid sterility, and hybrid breakdown.
- Wild relatives of maize like
Distant Hybridization: An Introduction
This document provides an introduction to distant hybridization, which involves crossing individuals from different plant species or genera. It discusses the history of distant hybridization, features such as hybrid fertility levels, and barriers like cross incompatibility and hybrid sterility. Techniques for overcoming these barriers are described, such as embryo rescue and chromosome doubling. The roles of distant hybridization in crop improvement through traits like disease resistance are explained. Limitations and achievements in producing new varieties through distant hybridization are also summarized.
Handling of segregating generations -Backcross breeding
Genetic basis, recurrent, donor parent, linkage drag,procedure,dominant gene transfer, recessive gene transfer,stepwise, simultaneous transfer, application, merits, demerits,examples
What's hot (20)
Heterosis in bottle gourd [lagenaria siceraria (mol.) standl.]
Heterosis in bottle gourd [lagenaria siceraria (mol.) standl.]
Cross the Best with the Best, and Select the Best: HELP in Breeding Selfing ...
Cross the Best with the Best, and Select the Best: HELP in Breeding Selfing ...
Handling of segregating generations -Backcross breeding
Handling of segregating generations -Backcross breeding
Similar to VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum melongena L.)
Selection possibilities for seed content fresh fruit quality in guava j. ap...
This document analyzes genetic variability in seed characteristics of 68 guava genotypes. It finds highly significant differences among genotypes for fruit weight and seed traits. A wide range of variation was observed for pulp to seed weight ratio (17.10 to 5905.31) and number of seeds per fruit (2 to 463). High genetic coefficient of variation and heritability estimates were found for pulp to seed weight ratio, 100-seed weight, and number of seeds per fruit, indicating these traits are influenced by additive genes and effective selection is possible. The study identifies pulp to seed weight ratio, number of seeds per fruit, and 100-seed weight as promising traits for guava breeding to develop varieties with fewer and softer seeds.
A Survey of Yield Differences Between Transgenic and Non-Transgenic Crops
This document summarizes findings from a survey of yield differences between transgenic and non-transgenic crops. The survey found no clear evidence that GM crops yield more than conventionally bred crops due to a lack of valid comparative trials. GM crops are derived from a single parent and carry one or few transferred genes, whereas conventional crops benefit from hybrid vigor through crossing varieties. The document goes on to describe methods of plant breeding, including traditional, Mendelian, and Isolection breeding, and compares these proven methods to GM technology which aims to transfer genes via cell bombardment.
P.4 10 review of literature
The document reviews several studies on eggplant/aubergine variability, heritability, genetic diversity, and performance. One study identified high heritability and genetic advance for fruit and shoot borer infestation, branches, and yield in four interspecific crosses. Another found genetic variation among Ralstonia solanacearum strains isolated from eggplants in the Philippines. A third noted high phenotypic and genotypic variation for traits like fruit length and weight, indicating potential for selection-based improvement.
Aa renu 1
This document provides details about a proposed study on genetic variability and diversity in okra. The study will analyze 30 okra genotypes to determine genetic variability, heritability, genetic advance, correlation and path coefficients between yield and other traits. It will also assess genetic divergence among genotypes. The study aims to identify diverse parents for hybridization and develop superior genotypes. It will be conducted in 2021 at the Research Farm of Chaudhary Charan Singh Haryana Agricultural University, Hisar, India using a randomized block design. Observations will be recorded for 12 traits related to plant growth, flowering, fruit characteristics and yield.
Genetics of traits-pptx
The documents discuss genetic analysis of quantitative traits in sunflower, including combining ability, heritability, gene action, and quantitative trait loci (QTL). Line x tester analysis revealed non-additive gene action was predominant for several traits, while additive and non-additive gene action were equally important for days to maturity and oil content. Several QTL were identified for traits like resistance to pathogens and seed weight. The genetic basis of oil quality traits in sunflower involves genes controlling fatty acid composition.
Variability, heritability and genetic advance analysis for grain yield in rice
Ten diverse genotypes of rice (Oryza sativa L.) were crossed in a diallel fashion to study variability , heritability and genetic advance for 12 quantitative characters . A considerable amount of variability (gcv) varied from 5.95 for no. of leaves per tiller to 17.40 for grain yield per plant and the estimates of pcv varied from 7.08 for days to 50% flowering to 17.49 for grain yield per plant. The heritability estimates ranged from 0.721 for total biological yield per plant to 1.000 for plant height . Since the heritability in broad sense was estimated , therefore . other parameters should also be considered for selecting the genotypes. The genetic advance varied from 0.71 for no. of leaves per tiller to 46.23 for no. of spikelets per panicle. High estimates of genetic advance was reported for plant height , days to maturity , days to 50% flowering and total biological yield per plant . However, high heritability estimates was associated with high predicted genetic advance for plant height , days to maturity ,days to 50% flowering and no. of spikelets per panicle. The situation is encouraging since selection based on these characters being of additive in nature , is likely to be more effective for their improvement. As such phenotypic selection for those traits is likely to be more effective for their improvement. The estimates of phenotypic coefficient of variation were higher than those of genotypic coefficient of variation for all the traits except plant height. High estimates of heritability and genetic advance were obtained for plant height , number of spikelets per panicle , days to 50 per cent flowering and days to maturity . These traits were mostly governed by additive gene action. And these characters are important for the breeder to construct selection indices.
Studies on Genetic Variability in Different Genotypes of French Bean (Phaseol...
Studies on Genetic Variability in Different Genotypes of French Bean (Phaseol...SSR Institute of International Journal of Life Sciences
DOI: 10.21276/ijlssr.2016.2.3.1
ABSTRACT- Genetic variability studied for eleven characters viz., number of leaves, branches, clusters, pods, pod
length (cm), seed per plant, plant height (cm), 100 seed weight (g), days to flower, maturity and yield per plant (g) in
group of forty two genotypes of French bean (Phaseolus vulgaris L.) revealed highly significant difference for all the
characters. High heritability not only guideline for breeding improvement must to associated with genetic advance
expressed a wide range of variability for all the traits. Heritability estimated and expected genetic advance were high
for number of leaves (95.46< 97.00), branches (45.85 > 14.00), clusters (89.45< 92.00), pods (92.84< 99.00), pod length
(88.94< 99.00), seeds per plant (92.20> 32.00), plant height (96.41< 106.00), 100 seed weight (99.22> 72.00), days to
flower (94.82 > 32.00), maturity (56.26> 13.00) and yield per plant (80.13 < 140.00) suggesting that these are more
useful traits for varietal improvement programme.
Key-words- French bean (Phaseolus vulgaris L.), Genetic Variability, Heritability, Phenotypic coefficient of variation,
Genotypic coefficient of variationCorn Seeding Rate Considerations for 2014
DuPont Pioneer conducted corn population research trials across North America from 2001-2012. The results showed that the optimal seeding rate depends on yield levels, with higher rates needed for higher yields. For typical Midwest yields of 190-220 bushels per acre in 2013, the optimal economic seeding rate was found to be 34,600 seeds per acre. Hybrid improvements have allowed for higher populations over time, with the top yielding hybrids from 2009-2012 performing best at 40,000 plants per acre. Growers can use these results to determine the best seeding rates for their hybrids, locations, and management practices.
Breeding techniques for organic agriculture.
Different breeding techniques for development of varities and hybrids that are allowed according to IFOAM Norms and need for development of varities specific for organic conditions. Importance of organic foods in current situation in context with health befits and environmental safety as well. To prevent health and environmental side effects form harmful chemicals.
Maximizing-Crop-Yield-with-the-Single-Seed-Descent-Method (1).pptx
The single seed descent method is a plant breeding technique that involves selecting individual plants grown from single seeds over multiple generations until a desirable genotype is achieved, improving crop yield. It originated from Mendelian genetics in the 1930s-1940s and has been used to develop high-yielding wheat and disease-resistant tomatoes. Key steps are selecting traits, isolating individual plants, repeating the process over generations, and breeding the best plants. Advantages are efficient selection, genetic purity, and improved yield, though it is time-consuming and limited by diversity. Recent advances may enhance its effectiveness.
Genetic Basis of selection
The document discusses various concepts in plant breeding and genetics including selection methods, genetic variation and inheritance, gene action, and estimation of genetic parameters. It provides information on selection in self-pollinated and cross-pollinated crops, the pure line theory, bulk and pure line selection methods, genetic variation and inbreeding, gene action and effects, estimation of genetic variance and heritability, and recurrent selection approaches. Examples and equations are given to explain key concepts in plant breeding and population genetics.
Ymv tolerance in greengram
1. The document discusses mungbean yellow mosaic virus (MYMV) which is a major biotic stress for mungbean crops. MYMV is transmitted by the whitefly vector Bemisia tabaci and causes significant yield losses.
2. Research has found that resistance to MYMV in mungbean is controlled by a single recessive gene. Studies identified RAPD markers linked to the MYMV resistance gene which can enable marker-assisted selection for resistant varieties.
3. Breeding efforts aim to develop MYMV-tolerant mungbean varieties through identification of resistant lines, interspecific crosses, and induced mutations. The ultimate goal is generating superior genotypes with durable resistance to minimize yield losses
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
This study evaluated variability in F2 populations of brinjal (eggplant) crosses. Significant variation was found among genotypes for traits like plant height, fruit circumference, single fruit weight, days to first harvest, days to last harvest, and yield per plant. The best performing genotype was Line-01× Line-25F2, which had the highest single fruit weight and yield per plant. Several other genotypes, including Line-01× Line-25F1 and Line-23× Line-24F2, also performed well for yield. The genotype Line-23× Line-24F2 was the earliest for days to flowering and first harvest. High heritability was observed for most traits, suggesting additive gene effects
Production and Evaluation of Highly Yielding Sweet Pepper Hybrids under Gree...
Production and Evaluation of Highly Yielding Sweet Pepper Hybrids under Gree...Ahmedabd Eleslamboly Eleslamboly
This document describes a study that evaluated 10 F1 hybrid sweet pepper crosses, their 7 parent lines, and a commercial hybrid for fruit yield and quality traits under greenhouse conditions. Significant variations were observed among the hybrids and parents for traits like early yield, total yield, average fruit weight, pericarp thickness, fruit diameter, and ascorbic acid content. The highest levels of positive heterobeltiosis (improvement over the best parent) were recorded for early yield (62.9%), total yield (50.5%), average fruit weight (96.7%), and other traits. Two hybrids, P2 × P3 and P2 × P4, showed the highest positive commercial heterosis (improvement over the commercial hybridLinthoi credit seminar
The document summarizes the genetic basis of crop domestication. It discusses how early farmers unconsciously selected traits from wild plants like larger seeds and loss of seed dispersal, forming the domestication syndrome. This selection through bottlenecks and selective sweeps reduced genetic diversity in crops compared to their wild ancestors. Various approaches are described to identify genes underlying domesticated traits, like QTL mapping, association studies, and selection scans of genomes. Two case studies on soybean and sunflower domestication are presented, finding genes related to traits like shattering and oil content experienced strong selection. Understanding domestication genetics can aid future crop improvement efforts.
Yield contributing character of maize
The document discusses important yield contributing characters of maize such as plant height, leaf area and number of leaves, canopy, number of cobs per plant, length of the cob, number of rows per cob, number of kernels per row, test weight, and grain yield. It provides details on each characteristic such as their measurement units and relationships to maize yield. For example, it states that increased plant height, leaf area, number of cobs per plant, cob length, and test weight are positively correlated with increased maize grain yield.
Evaluation of some morphological and yield component traits
This study evaluated the relationship between soybean seed yield and various morphological and yield component traits under different population densities and phosphorus levels over two growing seasons. The results showed that pod weight had the strongest correlation with seed yield per plant (R2=0.998), followed by number of seeds per plant (R2=0.937) and number of pods per plant (R2=0.884). Regression analyses found that yield component traits explained more variation in seed yield (R2=0.999) than morphological traits (R2=0.713). Specifically, pod weight, number of pods, and number of seeds per plant contributed most to determining soybean seed yield. These key traits could be useful for soy
Similar to VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum melongena L.) (17)
Selection possibilities for seed content fresh fruit quality in guava j. ap...
Selection possibilities for seed content fresh fruit quality in guava j. ap...
A Survey of Yield Differences Between Transgenic and Non-Transgenic Crops
A Survey of Yield Differences Between Transgenic and Non-Transgenic Crops
Variability, heritability and genetic advance analysis for grain yield in rice
Variability, heritability and genetic advance analysis for grain yield in rice
Studies on Genetic Variability in Different Genotypes of French Bean (Phaseol...
Studies on Genetic Variability in Different Genotypes of French Bean (Phaseol...
Maximizing-Crop-Yield-with-the-Single-Seed-Descent-Method (1).pptx
Maximizing-Crop-Yield-with-the-Single-Seed-Descent-Method (1).pptx
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
Production and Evaluation of Highly Yielding Sweet Pepper Hybrids under Gree...
Production and Evaluation of Highly Yielding Sweet Pepper Hybrids under Gree...
Evaluation of some morphological and yield component traits
Evaluation of some morphological and yield component traits
More from Moniruzzaman Shohag
Leaf counting of rice
The document describes the process of plant breeding using the step-by-step single seed descent method. It involves the following steps:
1. Selecting plants and self-pollinating them to advance generations.
2. Harvesting seeds from individual plants to create progeny lines.
3. Rating progeny lines on a scale of 0.1 to 1.0 based on desired traits compared to previous generations, with 1.0 being as good as the original parent plant.
4. Repeating the process for multiple generations to develop pure breeding lines.
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
This document provides 58 references on topics related to genetic variability, heritability, combining ability, and yield components in brinjal (Solanum melongena L.). The references include journal articles, theses, book chapters, and reports published between 1952 and 2009. The references cover studies conducted in locations such as India, Bangladesh, Philippines, and the United States.
P.21 49 chapter iv
This document reports on the results and discussion of an experiment analyzing 12 brinjal genotypes. It finds:
- Significant variation among genotypes in terms of plant height, number of branches, days to flowering, fruit circumference, and number of fruits per plant. The highest-yielding genotype was Line-01×Line-25F2.
- Differences in fruit length, single fruit weight, days to first harvest, days to last harvest, and yield per plant among genotypes. Line-01×Line-25F2 had the highest yield per plant.
- Prior studies have also found variability in brinjal yield and characteristics depending on genotype and environmental factors. Overall, the study identifies traits and genotypes that can
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
The document summarizes the materials and methods used in an experiment on brinjal genotypes conducted at the experimental farm of Sher-e-Bangla Agricultural University in Bangladesh from March to August 2008. The experiment used 12 brinjal genotypes in a randomized complete block design with three replications. Data was collected on plant characteristics and yield and statistically analyzed to evaluate differences between genotypes.
Effect of bari wheat varieties on seed germination, growth and yield under
The study evaluated the performance of four BARI wheat varieties (BARI ghom-23, BARI ghom-24, BARI ghom-25, BARI ghom-26) under coastal conditions in Patuakhali, Bangladesh. BARI ghom-26 showed superior performance for all parameters measured except total dry matter content and yield reduction percentage. It had the highest seed germination percentage, plant height, shoot dry weight, root dry weight, leaf area index, spike length, grains per spike, 1000-grain weight, and number of effective tillers. BARI ghom-26 was identified as the most suitable variety for cultivation under coastal conditions in Patuakhali based on its overall superior performance
Genetic variability, correlation and path coefficient analysis
This document reports on a study of genetic variability, correlation, and path coefficient analysis of chickpea (Cicer arietinum L.) genotypes. It found significant genetic variability for traits like number of secondary branches, plant height, number of pods per plant, 100 seed weight, and seed yield per plant. Correlation analysis revealed strong positive associations between seed yield and number of pods per plant and 100 seed weight. Path coefficient analysis showed that number of pods per plant and 100 seed weight had high direct effects on seed yield and should be important selection criteria for improving chickpea varieties.
Variability Study in Inter-varietal Crosses of Aubergine (Solanum melongena L.)
The document summarizes the results of a study assessing genetic variability in 12 eggplant genotypes. The study found significant differences between genotypes for several yield-related traits including number of primary and secondary branches per plant, days to flowering, number of fruits per plant, and fruit length. The genotype Line-23×Line-24F2 performed best for number of primary branches, early flowering, and number of fruits per plant. BARI-2 produced the most secondary branches and longest fruits. The study suggests crossing Line-23×Line-24F2 with BARI-2 to combine their valuable traits.
More from Moniruzzaman Shohag (7)
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum ...
Effect of bari wheat varieties on seed germination, growth and yield under
Effect of bari wheat varieties on seed germination, growth and yield under
Genetic variability, correlation and path coefficient analysis
Genetic variability, correlation and path coefficient analysis
Variability Study in Inter-varietal Crosses of Aubergine (Solanum melongena L.)
Variability Study in Inter-varietal Crosses of Aubergine (Solanum melongena L.)
Recently uploaded
一比一原版坎特伯雷大学毕业证(UC毕业证书)学历如何办理
制做办理【微信号:176555708】【制做办理(UC毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(EUR毕业证)鹿特丹伊拉斯姆斯大学毕业证如何办理
原件一模一样【微信：95270640】【鹿特丹伊拉斯姆斯大学毕业证EUR学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理鹿特丹伊拉斯姆斯大学毕业证毕业证offerEUR学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理鹿特丹伊拉斯姆斯大学毕业证EUR学位证毕业证offer【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理鹿特丹伊拉斯姆斯大学毕业证毕业证offerEUR学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理鹿特丹伊拉斯姆斯大学毕业证毕业证offerEUR学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
办理阿卡迪亚大学毕业证（uvic毕业证）本科文凭证书原版一模一样
原版一模一样【微信：741003700 】【阿卡迪亚大学毕业证（uvic毕业证）本科文凭证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
按照学校原版(UofT文凭证书)多伦多大学毕业证快速办理
快速办理【(UofT毕业证书)多伦多大学毕业证】【176555708微信号】硕士毕业证成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
体育博彩论坛-十大体育博彩论坛-体育博彩论坛|【网址🎉ac55.net🎉】
在体育博彩论坛，你会发现数之不尽的在线博彩机会，包括世界各地的精彩体育赛事以及绝佳的赔率。此外，体育博彩论坛还会为你提供诸如赌场、宾果和扑克等在线游戏以及各种各样的奖金优惠，包括体育博彩论坛的免费投注。无论你是忠实的足球迷，或者是二十一点的专业玩家，在这里都可以找到你最感兴趣的投注市场或游戏。
在线办理(UOIT毕业证书)安大略省理工大学毕业证在读证明一模一样
原件一模一样【微信：bwp0011】《(UOIT毕业证书)安大略省理工大学毕业证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(uwm毕业证书)美国威斯康星大学密尔沃基分校毕业证如何办理
原版一模一样【微信：741003700 】【(uwm毕业证书)美国威斯康星大学密尔沃基分校毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uwm毕业证书)美国威斯康星大学密尔沃基分校毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uwm毕业证书)美国威斯康星大学密尔沃基分校毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uwm毕业证书)美国威斯康星大学密尔沃基分校毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uwm毕业证书)美国威斯康星大学密尔沃基分校毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
欧洲杯足彩-欧洲杯足彩体育投注-欧洲杯足彩投注网站|【网址🎉ac99.net🎉】
【网址🎉ac99.net🎉】欧洲杯足彩是世界上历史最悠久的博彩公司之一。其历史可以追溯到十九世纪末，确切时间是1886年。这家英国公司拥有超过15000名员工，是博彩行业规模最大的公司。欧洲杯足彩是英国最受欢迎的实体博彩公司之一，其排名仅次于欧洲杯足彩，旗下2800家投注站遍布全英国。
A Guide to a Winning Interview June 2024
This webinar is an in-depth review of the interview process. Preparation is a key element to acing an interview. Learn the best approaches from the initial phone screen to the face-to-face meeting with the hiring manager. You will hear great answers to several standard questions, including the dreaded “Tell Me About Yourself”.
美洲杯买球-美洲杯买球下注平台-美洲杯买球投注平台|【网址🎉ac55.net🎉】
【网址🎉ac55.net🎉】美洲杯买球是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。美洲杯买球通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，美洲杯买球提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
一比一原版美国西北大学毕业证(NWU毕业证书)学历如何办理
原版办理【微信号:BYZS866】【美国西北大学毕业证(NWU毕业证书)】【微信号:BYZS866】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号BYZS866】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号BYZS866】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
欧洲杯投注-欧洲杯投注投注官方网站-欧洲杯投注买球投注官网|【网址🎉ac99.net🎉】
【网址🎉ac99.net🎉】在欧洲杯投注，你会发现数之不尽的在线博彩机会，包括世界各地的精彩体育赛事以及绝佳的赔率。此外，欧洲杯投注还会为你提供诸如赌场、宾果和扑克等在线游戏以及各种各样的奖金优惠，包括欧洲杯投注的免费投注。无论你是忠实的足球迷，或者是二十一点的专业玩家，在这里都可以找到你最感兴趣的投注市场或游戏。
Gabrielle M. A. Sinaga Portfolio, Film Student (2024)
My portfolio as a highly motivated film student pursuing a career in Yogyakarta.
Khushi Saini, An Intern from The Sparks Foundation
This is my first task as an Talent Acquisition(Human resources) Intern in The Sparks Foundation on Recruitment, article and posts.
I invitr everyone to look into my work and provide me a quick feedback.
欧洲杯外围-欧洲杯外围赛程-欧洲杯外围压注|【网址🎉ac99.net🎉】
【网址🎉ac99.net🎉】欧洲杯外围是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。欧洲杯外围通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，欧洲杯外围提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
Connect to Grow: The power of building networks
In the intricate tapestry of life, connections serve as the vibrant threads that weave together opportunities, experiences, and growth. Whether in personal or professional spheres, the ability to forge meaningful connections opens doors to a multitude of possibilities, propelling individuals toward success and fulfillment.
Eirini is an HR professional with strong passion for technology and semiconductors industry in particular. She started her career as a software recruiter in 2012, and developed an interest for business development, talent enablement and innovation which later got her setting up the concept of Software Community Management in ASML, and to Developer Relations today. She holds a bachelor degree in Lifelong Learning and an MBA specialised in Strategic Human Resources Management. She is a world citizen, having grown up in Greece, she studied and kickstarted her career in The Netherlands and can currently be found in Santa Clara, CA.
按照学校原版(ArtEZ文凭证书)ArtEZ艺术学院毕业证快速办理
官方原版办理【(ArtEZ毕业证书)ArtEZ艺术学院毕业证】【176555708微信号】海外认证成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
LinkedIn for Your Job Search June 17, 2024
This webinar helps you understand and navigate your way through LinkedIn. Topics covered include learning the many elements of your profile, populating your work experience history, and understanding why a profile is more than just a resume. You will be able to identify the different features available on LinkedIn and where to focus your attention. We will teach how to create a job search agent on LinkedIn and explore job applications on LinkedIn.
Community Skills Building Workshop | PMI Silver Spring Chapter | June 12, 2024
Community Skills Building Workshop | PMI Silver Spring Chapter | June 12, 2024Hector Del Castillo, CPM, CPMM
We recently hosted the much-anticipated Community Skill Builders Workshop during our June online meeting. This event was a culmination of six months of listening to your feedback and crafting solutions to better support your PMI journey. Here’s a look back at what happened and the exciting developments that emerged from our collaborative efforts.
A Gathering of Minds
We were thrilled to see a diverse group of attendees, including local certified PMI trainers and both new and experienced members eager to contribute their perspectives. The workshop was structured into three dynamic discussion sessions, each led by our dedicated membership advocates.
Key Takeaways and Future Directions
The insights and feedback gathered from these discussions were invaluable. Here are some of the key takeaways and the steps we are taking to address them:
• Enhanced Resource Accessibility: We are working on a new, user-friendly resource page that will make it easier for members to access training materials and real-world application guides.
• Structured Mentorship Program: Plans are underway to launch a mentorship program that will connect members with experienced professionals for guidance and support.
• Increased Networking Opportunities: Expect to see more frequent and varied networking events, both virtual and in-person, to help you build connections and foster a sense of community.
Moving Forward
We are committed to turning your feedback into actionable solutions that enhance your PMI journey. This workshop was just the beginning. By actively participating and sharing your experiences, you have helped shape the future of our Chapter’s offerings.
Thank you to everyone who attended and contributed to the success of the Community Skill Builders Workshop. Your engagement and enthusiasm are what make our Chapter strong and vibrant. Stay tuned for updates on the new initiatives and opportunities to get involved. Together, we are building a community that supports and empowers each other on our PMI journeys.
Stay connected, stay engaged, and let’s continue to grow together!
About PMI Silver Spring Chapter
We are a branch of the Project Management Institute. We offer a platform for project management professionals in Silver Spring, MD, and the DC/Baltimore metro area. Monthly meetings facilitate networking, knowledge sharing, and professional development. For more, visit pmissc.org.Recently uploaded (20)
Gabrielle M. A. Sinaga Portfolio, Film Student (2024)
Gabrielle M. A. Sinaga Portfolio, Film Student (2024)
Khushi Saini, An Intern from The Sparks Foundation
Khushi Saini, An Intern from The Sparks Foundation
Community Skills Building Workshop | PMI Silver Spring Chapter | June 12, 2024
Community Skills Building Workshop | PMI Silver Spring Chapter | June 12, 2024
VARIABILITY STUDY IN F2 MATERIALS OF INTERVARIETAL CROSS OF BRINJAL (Solanum melongena L.)
- 1. 57 CHAPTER VI RECOMMENDATION Minimum difference between genotypic and phenotypic variance and coefficient of variation were observed for all the traits studied. High to moderate heritability, high genetic advanced and genetic advanced in percent of mean were observed for all the traits studied. Number of fruit per plant and single fruit weight showed high degree of significant positive correlation with yield per plant. Based on above conclusion selection could be made on number of fruit per plant and single fruit weight to improve the yield of brinjal genotypes. Regarding singal fruit weight and yield per plant the genotype Line-01× Line-25F2 performed best. Genotypes Line-01× Line-25F1, Line-23× Line-24F2 produced higher yields next to genotype Line-01× Line-25F2. In respect of days to flowering and days to first harvest Line-23× Line-24F2 was found as earliest genotype.