Z-Way for Windows is software that allows you to control your Z-Wave home automation network. It requires installation of the Z-Way software and driver for the USB Z-Wave controller. Once installed, you can include and control Z-Wave devices, view device information and sensor values, and configure the network from the browser interface. The software also works with the Z-Way iPhone app to remotely control the smart home network.
This manual, as well as the software described in it, is furnished under license and may only be used
or copied in accordance with the terms of such license. The information in this manual is intended for
informational use only and is subject to change without notice. Anite Finland Ltd assumes no
The Nano SOM from Mistral is an extremely small footprint (44mm * 26 mm) System-on-Module; weighing just 7gms; which can be used directly in your end product design.
Radio-frequency (RF) remote controllers are widely used in multiple industrial applications like manufacturing, construction and transportation. Cranes, drillers and diggers, among others, are commonly equipped with RF controllers, which have become the weakest link in safety-critical IIoT applications.
Our security assessment revealed a lack of important security features at different levels, with vendors using obscure proprietary protocols instead of standards. As a consequence, this technology appeared to be vulnerable to attacks like replay, command injection, e-stop abuse, malicious repairing and reprogramming. Together with ZDI, we ran into a 6-months responsible disclosure process and then released 10 security advisories.
In this presentation, we share the findings of our research and make use of demos to discuss the problems in detail. We conclude providing recommendations for all parties involved in the life-cycle of these devices, from vendors to users and system integrators.
This manual, as well as the software described in it, is furnished under license and may only be used
or copied in accordance with the terms of such license. The information in this manual is intended for
informational use only and is subject to change without notice. Anite Finland Ltd assumes no
The Nano SOM from Mistral is an extremely small footprint (44mm * 26 mm) System-on-Module; weighing just 7gms; which can be used directly in your end product design.
Radio-frequency (RF) remote controllers are widely used in multiple industrial applications like manufacturing, construction and transportation. Cranes, drillers and diggers, among others, are commonly equipped with RF controllers, which have become the weakest link in safety-critical IIoT applications.
Our security assessment revealed a lack of important security features at different levels, with vendors using obscure proprietary protocols instead of standards. As a consequence, this technology appeared to be vulnerable to attacks like replay, command injection, e-stop abuse, malicious repairing and reprogramming. Together with ZDI, we ran into a 6-months responsible disclosure process and then released 10 security advisories.
In this presentation, we share the findings of our research and make use of demos to discuss the problems in detail. We conclude providing recommendations for all parties involved in the life-cycle of these devices, from vendors to users and system integrators.
Wireless security testing with attack by Keiichi Horiai - CODE BLUE 2015CODE BLUE
We are in the IoT era. In this session, the function of GNURadio will be introduced with demonstration. GNURadio is a SDR (Software Defined Radio) tool to analyze wireless security such as Bluetooth LE. As an example of a SDR usage, I will demonstrate the replay attack for RF signal of ADS-B (Automatic Dependent Surveillance Broadcast) mounted on an aircraft and sniffer for wireless keyboards. Ideas of the counter measurement will also be discussed.
The MGV-4000/PA Controller from TDM allows routing of audio inputs from different sources to the connected speaker zones. The controller converts the VoIP audio codecs into analogue signals as input for the connected amplifiers and their speakers.
The zone selection feature allows the operator or dispatcher to select dedicated speakers to broadcast an announcement at a specific location. Each broadcast can be assigned a priority level, those with a higher priority will take precedence over announcements of lower priority.
All announcements are duplicated on the MGV-4000 /PA Controller and forwarded to the voice recorder on TDM’s NIS system; providing recorded evidence of each audio announcements.
The Sapphire series represents a revolutionary new pulse generator technology that offers full function in a compact and cost effective package. At just 7.125“ x 5.1“ x 1.5” this is one of the smallest units available, but you will not be disappointed in its performance, features or programmability. This instrument also has wireless capabilities (optional) via Bluetooth allowing you to communicate without a USB or RS232 connection.
The MGV-4000 /TETRA Mobile Gateway provides access to the TETRA network, enabling communication between mobile subscribers in the TETRA network and a dispatching terminal on TDM‘s VoIP communication platform (NIS), or an alternative VoIP system.
Up to 8 external TETRA mobiles can be attached to the MGV-4000 for multiple, simultaneous connections to the TETRA network. The gateway converts the audio voice stream and the TETRA-specific PEI signalling into VoIP, and standard IP protocols.
The connection via the TETRA Air Interface means that the MGV-4000 is particularly suitable for remote locations and for ad-hoc applications.
Aditgroup present the AVtron Monarch dome camera for the home security which able to support the dynamic wide rang. Its 1.3MP lens catches the HD resolution pictures with the great clarity.
I am the authorized K-12 representative in South Carolina for eInstruction by Turning Technologies
Bill McIntosh
SchoolVision Inc..
Authorized South Carolina K-12 Consultant for eInstruction / Turning Technologies
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Website : www.einstruction.com
For technical assistance on all eInstruction® or Turning Technologies products please call 866-746-3015
Turning Technologies | 255 West Federal Street | Youngstown, OH Main: 330-746-3015 | Toll Free: 866-746-3015 | Fax: 330-884-6065
www.TurningTechnologies.com
Wireless security testing with attack by Keiichi Horiai - CODE BLUE 2015CODE BLUE
We are in the IoT era. In this session, the function of GNURadio will be introduced with demonstration. GNURadio is a SDR (Software Defined Radio) tool to analyze wireless security such as Bluetooth LE. As an example of a SDR usage, I will demonstrate the replay attack for RF signal of ADS-B (Automatic Dependent Surveillance Broadcast) mounted on an aircraft and sniffer for wireless keyboards. Ideas of the counter measurement will also be discussed.
The MGV-4000/PA Controller from TDM allows routing of audio inputs from different sources to the connected speaker zones. The controller converts the VoIP audio codecs into analogue signals as input for the connected amplifiers and their speakers.
The zone selection feature allows the operator or dispatcher to select dedicated speakers to broadcast an announcement at a specific location. Each broadcast can be assigned a priority level, those with a higher priority will take precedence over announcements of lower priority.
All announcements are duplicated on the MGV-4000 /PA Controller and forwarded to the voice recorder on TDM’s NIS system; providing recorded evidence of each audio announcements.
The Sapphire series represents a revolutionary new pulse generator technology that offers full function in a compact and cost effective package. At just 7.125“ x 5.1“ x 1.5” this is one of the smallest units available, but you will not be disappointed in its performance, features or programmability. This instrument also has wireless capabilities (optional) via Bluetooth allowing you to communicate without a USB or RS232 connection.
The MGV-4000 /TETRA Mobile Gateway provides access to the TETRA network, enabling communication between mobile subscribers in the TETRA network and a dispatching terminal on TDM‘s VoIP communication platform (NIS), or an alternative VoIP system.
Up to 8 external TETRA mobiles can be attached to the MGV-4000 for multiple, simultaneous connections to the TETRA network. The gateway converts the audio voice stream and the TETRA-specific PEI signalling into VoIP, and standard IP protocols.
The connection via the TETRA Air Interface means that the MGV-4000 is particularly suitable for remote locations and for ad-hoc applications.
Aditgroup present the AVtron Monarch dome camera for the home security which able to support the dynamic wide rang. Its 1.3MP lens catches the HD resolution pictures with the great clarity.
I am the authorized K-12 representative in South Carolina for eInstruction by Turning Technologies
Bill McIntosh
SchoolVision Inc..
Authorized South Carolina K-12 Consultant for eInstruction / Turning Technologies
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Website : www.einstruction.com
For technical assistance on all eInstruction® or Turning Technologies products please call 866-746-3015
Turning Technologies | 255 West Federal Street | Youngstown, OH Main: 330-746-3015 | Toll Free: 866-746-3015 | Fax: 330-884-6065
www.TurningTechnologies.com
I am the authorized K-12 representative in South Carolina for eInstruction by Turning Point.
Bill McIntosh
SchoolVision Inc..
Authorized K-12 Consultant for eInstruction by Turning Technologies
Phone :843-442-8888
Email :WKMcIntosh@Comcast.net
Twitter : @OtisTMcIntosh
SchoolVision Website on Facebook: https://www.facebook.com/WKMIII
Website : www.einstruction.com
Stay Connected - @eInstruction • Facebook
Turning Technologies | 255 West Federal Street | Youngstown, OH Main: 330-746-3015 | Toll Free: 866-746-3015 | Fax: 330-884-6065
www.TurningTechnologies.com
Congratulations……!!!!! A Good news for all of us. Now you can buy all electronic products like bluetooth relays, iPhone relays to automate your home, Fusion Series Controllers, Ethernet Controlled Relay, ethernet relay, ethernet relay control, remote controlled electrical switch, remote controlled dimmer, Push Notifications IOS, ios push notification server, wifi power switch, home automation ideas, wifi relay controller etc. only at https://www.controlanything.co.in/
This user manual serves as general guidance for UbiBot Smart Air Quality Sensors. Some features, which are marked with asterisk, are available only for specific versions. Please refer to the related instructions according to the version you purchased. By using this user manual, it will be easy for the user to operate the device.
싸이퍼랩 9700 윈도우즈 PDA (Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3), 산업용PDA는 혹독한 현장에 적합하도록 설계되었으며 2 배터리(옵션) 운영으로 24시간 운영이 가능합니다.
타사의 경쟁 모델보다 CPU 처리속도, 메모리, 배터리 방진, 방수등급 등이 우월하면서도 가격 경쟁력 또한 우수합니다.
다양한 스캔 엔진을 제공하며 현장에서 교체 가능하도록 설계되었습니다.
(1D, 2D 다중모드, 최대 15m 바코드 인식)
Extended Range Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 13.5˚ ± 0.7˚
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
Min. Distance : 2 in/ 5 cm (7.5 mil)
Max. Distance : 45 ft/ 9.1 m (100 mil retro-reflective)
Near/Far 2D Imager
Technology : Auto-focus 2D imager
Light source : Auto-adaptive illumination: 617 nm highly visible LEDs
Scan Angle : 14˚ (horizontal), 8.7˚ (vertical)
Print Contrast : Down to 40%
Ambient Lighting : From 0 to 100,000 lux
Min. Distance : 6 in/ 15 cm (10 mil)
Max. Distance : 50 ft/ 15 m (300mil)
Laser
Technology : Laser
Light source : Visible laser diode 650 nm
Scan Angle : 47˚±3˚(typical), 35˚±3˚(narrow)
Print Contrast : Minimum 20% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : 4,844 lux (indoor) / 86,111 lux (sunlight)
DOF : 1 to 45 in. / 2.5 to 114.3 cm
2D Imager
Technology : 752 x 480 pixels
Light source : 625 ±5 nm LEDs
Scan Angle : 40˚ (horizontal), 25˚ (vertical)
Print Contrast : Minimum 25% absolute dark/ light reflectance measured at 650 nm
Ambient Lighting : Max 96,900 lux (sunlight)
DOF :
5 mil code39 1.4 in./5.3cm to 7.5 in./19.1 cm
100% UPC 1.6 in./4.1cm to 12 in./30.5cm
5 mil PDF417 2.8 in./7.1cm to 4.5 in./11.4cm
다양한 키패드 선택
30-Key 및 38-Key 뉴메릭 키패드와 각각 4개 및 10개의 기능키
특정 52-Key 알파 뉴메릭키로 VT220 / TN3270 / TN5250 시스템 터미널 에뮬레이션 제공
우연한 터치에 의한 키패드 입력 오류를 방지하기 위한 키간격 유지 및 인체공학적 디자인
유연하고 효율적인 무선통신 제공
CCXv4 인증 IEEE 802.11 a/b/g/n
Bluetooth® 통신 Class II, V2.1
Push-to-talk (무전기, 동보전송 기능)
장시간 사용을 위한 주요 대안
표준 3600 mAh 뱃더리 및 대용량 5400 mAh 뱃더리 제공
최소 13 시간 계속 운용 (20초당 1번 레이저 스캐닝시)
두가지 Windows® 플랫폼 지원
Window® CE 6.0
Windows® Embedded Handheld 6.5
Android 6.0 (모델 : 9700A)
블루투스 및 무선랜 지원거리
블루투스 : 가시거리내에서 50m 지원
802.11 b/g: 가시거리 내에서 300 m 지원
802.11 a: 가시거리 내에서 250 m 지원
PERFORMANCE
Operating system : Windows® CE 6.0 R3 / Window® Embedded Handheld 6.5.3
CPU : TI OMAP 3730 1GHz
Memory : 4GB Nand FLASH / 512MB DDR SDRAM
Expansion : Micro SD slot with SDHC support
Operating power : Rechargeable 3.7V 3600 mAh / 5400 mAh Li-ion Battery
Working hours1 : 13 hours
Alert : 3 LED indicators (for RF, charging status and good reading) / Vibrator/ Speaker
Interface supported : USB, RS232
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Optimal protection for critical loads. To limit starting currents on problematic devices, such as energy saving bulbs and fluorescent bulbs. Problematic devices, such as electronic ballasts, energy-saving light bulbs, incandescent bulbs, LED drivers, and switching power supplies, consume a lot of power during ignition due to the multiplication of current. nominal and can therefore destroy the switching relay.
With the ESB200 current limiter, the high current that can occur when switching on electronic devices is limited to a harmless value. It is also possible to limit the inrush current of incandescent lamps to give them a longer life. A protection fuse is also integrated. This starting current limiter can be plugged directly into the power supply circuit for loads up to 200 VA. This compact device can be installed very easily in junction and recessed boxes or in lamp boxes, for example. The device is easily installed in series with the load
MATHEMATICS BRIDGE COURSE (TEN DAYS PLANNER) (FOR CLASS XI STUDENTS GOING TO ...PinkySharma900491
Class khatm kaam kaam karne kk kabhi uske kk innings evening karni nnod ennu Tak add djdhejs a Nissan s isme sniff kaam GCC bagg GB g ghan HD smart karmathtaa Niven ken many bhej kaam karne Nissan kaam kaam Karo kaam lal mam cell pal xoxo
NO1 Uk Amil Baba In Lahore Kala Jadu In Lahore Best Amil In Lahore Amil In La...Amil baba
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
1. ZWAYW
Z-Way for Windows is a fully functionally Z-
Way controller software allowing to control
your Z-Wave network.
To use the software under windows execute
the following steps:
Installation
1. Plug in the USB Stick and check if the
device driver for the FTDI USB-Serial
Converter of the USB Stick is installed
correctly. You find the latest device driver for
you Windows Version at the vendors support
site http://www.ftdichip.com/FTDrivers.htm
2. Download the ZWay4Win installer from the
web at:
http://www.zwave.me/download/zway4win.m
si
and execute it by double clicking the icon.
3. Make sure you select the right COM Port of the
USB Stick. You must have the USB Stick attached
to your PC when installing the software.
4. Start the Browser.
5. Access the Browser User Interface using
http://localhost:8083
Note: The software is installed as windows
service in the background. You can
unplug/re-plug the USB Stick at any time.
Once the USB stick is attached, the service
is reactivated and the browser UI can be
used again.
LED
The ZWAYW uses two LEDs to indicate
status information. They are inside the
enclosure but shine thru the translucent
plastics.
- RED: permanent on Inclusion Mode
and Exclusion Mode
- GREEN: Blink on transmission
success
2. User Interface
-You can include new devices with the button
"Include" in the network tab
-You can check the device capabilities of the
devices included under the tab "device
configuration"
-You can operate device and read sensor
values under the tab
-You may want to upload your floor plan and
drag and drop your device icons to the place
where they are. The icons also allow to
operate the device and read the sensor
values
iPhone App
Go to the app store and download the
iPhone App "Z-Way" free of charge. Start the
app and create a new profile. If you only
want to operate your Smart Home from
within the house, just add the IP address of
your windows machine as URL like
http://YOURURL:8083/
Trouble Shooting:
- Z-Way installer terminates: Check available
memory and administrator rights!
- No COM Port selectable: Device driver is
not installed correctly, check device manager
- No service at http://localhost:8083: Did you
change the http port? Check in service
manager, if service is active. Check USB
stick hardware
Technical Data
Z-Wave Chip Sigma Designs ZM3102
Indicator one green LED and one red LED
Frequency EU: 868.4 MHz (EN 300 220)
RU: 869.0 MHz (GKRCh/EN 300 200)
Wireless Range
Up to 100 m outside, on average up to
20 m inside buildings
Explorer Frame
Support
Yes
SDK 4.54 pl1
Device Type Depends on Application firmware
Routing Yes
Serial API Version 4.2
Dimensions 65 x 24 x 8 mm
Weight 15 gr.
Origin Made in Germany
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and
receiver.
(3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio/TV technician
for help. Any changes or modification not expressly
approved by the party responsible for compliance could
void the user's authority to operate the device.
Where shielded interface cables have been provided with
the product or specified additional components or
accessories elsewhere to be used with the installation of
the product, they must be used in order to ensure
compliance with FCC regulations.
CE for Class B ITE (Following European standard
EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995,
EN55024/1998, EN60950-1/2001)
Z-Wave.Me guarantees that every device is free from
physical defects in material and workmanship under normal
use for one year from the date of purchase. If the product
proves defective during this one-year warranty period, Z-
Wave.Me will replace it free of charge. Z-Wave.Me does
not issue any refunds. This warranty is extended to the
original end user purchase only and is not transferable.
This warranty does not apply to: (1) damage to units
caused by accident, dropping or abuse in handling, or any
negligent use; (2) units which have been subject to
unauthorized repair, taken apart, or otherwise modified; (3)
units not used in accordance with instruction; (4) damages
exceeding the cost of the product; (5) transit damage, initial
installation costs, removal cost, or reinstallation cost. For
information on additional devices, please visit us online.
3. ZWAYW
Z-Way for Windows is a fully functionally Z-
Way controller software allowing to control
your Z-Wave network.
To use the software under windows execute
the following steps:
Installation
1. Plug in the USB Stick and check if the
device driver for the FTDI USB-Serial
Converter of the USB Stick is installed
correctly. You find the latest device driver for
you Windows Version at the vendors support
site http://www.ftdichip.com/FTDrivers.htm
2. Download the ZWay4Win installer from the
web at:
http://www.zwave.me/download/zway4win.m
si
and execute it by double clicking the icon.
3. Make sure you select the right COM Port of the
USB Stick. You must have the USB Stick attached
to your PC when installing the software.
4. Start the Browser.
5. Access the Browser User Interface using
http://localhost:8083
Note: The software is installed as windows
service in the background. You can
unplug/re-plug the USB Stick at any time.
Once the USB stick is attached, the service
is reactivated and the browser UI can be
used again.
LED
The Z-StickC uses two LEDs to indicate
status information. They are inside the
enclosure but shine thru the translucent
plastics.
- RED: permanent on Inclusion Mode
and Exclusion Mode
- GREEN: Blink on transmission
success
4. User Interface
- You can include new devices with the
button "Include" in the network tab
- You can check the device capabilities of the
devices included under the tab "device
configuration"
- You can operate device and read sensor
values under the tab
- You may want to upload your floor plan and
drag and drop your device icons to the place
where they are. The icons also allow to
operate the device and read the sensor
values
iPhone App
Go to the app store and download the
iPhone App "Z-Way" free of charge. Start the
app and create a new profile. If you only
want to operate your Smart Home from
within the house, just add the IP address of
your windows machine as URL like
http://YOURURL:8083/
Trouble Shooting:
- Z-Way installer terminates: Check available
memory and administrator rights!
- No COM Port selectable: Device driver is
not installed correctly, check device manager
- No service at http://localhost:8083: Did you
change the http port? Check in service
manager, if service is active. Check USB
stick hardware
Technical Data
Z-Wave Chip Sigma Designs ZM3102
Indicator one green LED and one red LED
Frequency EU: 868.4 MHz (EN 300 220)
RU: 869.0 MHz (GKRCh/EN 300 200)
Wireless Range
Up to 100 m outside, on average up to
20 m inside buildings
Explorer Frame
Support
Yes
SDK 4.54 pl1
Device Type Depends on Application firmware
Routing yes
Serial API Version 04.02.13
Dimensions 65 x 24 x 8 mm
Weight 15 gr.
Origin Made in Germany
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and
receiver.
(3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio/TV technician
for help. Any changes or modification not expressly
approved by the party responsible for compliance could
void the user's authority to operate the device.
Where shielded interface cables have been provided with
the product or specified additional components or
accessories elsewhere to be used with the installation of
the product, they must be used in order to ensure
compliance with FCC regulations.
CE for Class B ITE (Following European standard
EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995,
EN55024/1998, EN60950-1/2001)
Z-Wave.Me guarantees that every device is free from
physical defects in material and workmanship under normal
use for one year from the date of purchase. If the product
proves defective during this one-year warranty period, Z-
Wave.Me will replace it free of charge. Z-Wave.Me does
not issue any refunds. This warranty is extended to the
original end user purchase only and is not transferable.
This warranty does not apply to: (1) damage to units
caused by accident, dropping or abuse in handling, or any
negligent use; (2) units which have been subject to
unauthorized repair, taken apart, or otherwise modified; (3)
units not used in accordance with instruction; (4) damages
exceeding the cost of the product; (5) transit damage, initial
installation costs, removal cost, or reinstallation cost. For
information on additional devices, please visit us online.