This document provides an oral presentation summary for Engineer Md. Mamunur Rashid, including personal information, career history working for 15 years at a fertilizer company and management institute, education background, and local and foreign training experiences. It also lists proceedings and journal publications related to his work in mechanical engineering and management.

1. WELCOME TO
ORAL PRESENTATION FOR
CAREER of
ENGR. MD. MAMUNUR RASHID,
Life Fellow of IEB-7645

2. Personal Information
 Date of Birth November 01, 1970
 Place of Birth Dinajpur, Bangladesh
 Nationality Bangladeshi
Present Resident in
Japan
 Language Bangla, English
 Marital Status Married

3. My 15 years Career:
 Around 7 years in Jamuna Fertilizer Company Limited of BCIC as
a Mechanical Engineer since May 31,1997 to February 15,2004.
 Around 8 years in Bangladesh Institute of Management as a
Management Counsellor since February 16,2004 to till date.

4. Introduction
 I would like to give thanks to the ‘BPERB’ for calling me for
interview.
 I also pay respects and thanks to my Assessors.
 I am a Mechanical Engineer, I obtained my engineering degree from
RUET (former BIT Rajshahi) in 1993.
 At present, I am doing PhD in Manufacturing Engineering at Kitami
Institute of Technology in Japan from Bangladesh Institute of
Management (BIM) ,Dhaka, Bangladesh since January 2010.

5. My Career in Brief: Education
 SSC (Science) 1985-1st Division, Rajshahi.
 HSC (Science) 1987-1st Division, Rajshahi.
 B.Sc in Mechanical Engineering 1993 with 1st class
from RUET (former BIT,
Rajshahi).
 M.Sc in Mechanical Engineering 1996 from BUET, Dhaka.
 MBA 2004 from BOU, Gazipur.
 Diploma in Computer Science and Application
2006 from BOU, Gazipur.
 PGD in HRM 2007 from Institute of Personnel
Management (IPM), Dhaka.
 PGD in Marketing Management 2008 from Bangladesh Institute of
Management (BIM), Dhaka.

6. My Career in Brief: Foreign
Training
 Successfully completed training course on “Mechatronics Systems Technology”
Conducted by Nanyang Polytechnic, Singapore, from14 October-1 November,
2002.jointly sponsored by the Ministry of Foreign Affairs, Singapore and Japan
International Cooperation Agency.
 Actively participated and presented a technical paper as an international delegate at the
“8th National Convention & FEISCA Regional Meet on Engineers’ in Social
Transformation of Nepal Engineers’ Association (NEA)”, held at Kathmandu,
capital of Nepal, during April 3-5,2003.
 Successfully completed training course on “Total Quality Management and
ISO9000/14000 & QS9000” Conducted by National Institute of Small Industry
Extension Training (nisiet) , from11 October-03 December, 2004. Sponsored by the
Ministry of External Affairs, India under ITEC programme.
 Actively participated represented of Bangladesh as absent of President of IEB, and
presented an innovative management paper as an international delegate at the “21st
Indian Engineering Congress”, held at Guwahati, Capital of Assam state, India,
during December 22-24, 2006.

7. My Career in Brief: Local Training
 Successfully completed the training course on “Preventive
Maintenance” of two weeks in Training Institute for Chemical Industries,
Polash, Narsingdi, Bangladesh, February 14-26, 1998.
 Successfully completed the training course on “Control Valve and Their
Application in Industrial Process Control” of two weeks in Training
Institute for Chemical Industries, Polash, Narsingdi, Bangladesh, October
4-15,1998.
 Successfully completed the Workshop on “Parallel Thinking Method
and Forth Generation Time Management System” organized by the
Institution of Engineers, Bangladesh held at Tarakandi, Jamalpur from of 2
June 1999.
 Successfully completed the training course on “Vibration Monitoring &
Data Acquisition Instrumentation” of two weeks in Training Institute
for Chemical Industries, Polash, Narsingdi, Bangladesh, April 01-12, 2001.

8. My Career in Brief:
Local Training (Cont’d)
 Successfully completed the training course on “Computer Hardware
Maintenance & Trouble Shooting” of one week in M/S Daffodils Computers,
64/3, Lake Circus, Kalabagan (2nd-4th floor). Mirpur Road, Dhaka-1216,
Bangladesh, May 12-17, 2001.
 A short course on “Design and Analysis of Heat Exchangers for Process
and Power Industries” December 29-30, 2001 organized by BSME-ASME at
Dhaka, Bangladesh.
 Attended a Seminar on “Pollution Control Technology and Energy Saving”
organized by the Institution of Engineers, Bangladesh held at Tarakandi, Jamalpur
from 23rd October, 2003.

9. My Career in Brief:
Local Training (Cont’d)
 Satisfactorily completed the course on “Training of Trainers” of two
weeks in Bangladesh Institute of Management, 4 Sobhanbag, Mirpur Road,
Dhaka-1207, Bangladesh, from January 20-31,2004.
 Satisfactorily completed the training course on “Project Appraisal and
Evaluation” of two weeks in Bangladesh Institute of Management, 4
Sobhanbag, Mirpur Road, Dhaka-1207, Bangladesh, February 22-March
4,2004.

10. My Career in Brief:
Local Training (Cont’d)
 Satisfactorily completed the training course on “Project Management” of
three weeks in Bangladesh Institute of Management, 4 Sobhanbag, Mirpur
Road, Dhaka-1207, Bangladesh, May16-June3,2004.
 Satisfactorily completed the training course on “Motivation for
Improvement of Quality and Productivity” of 2 days in Bangladesh
AOTS Alumni Society (BAAS), Room No. 31-32, 7th floor, Eastern Plaza,
Sonargaon Road, Hatirpool, Dhaka-1205.2-3 October,2004.
 Satisfactorily completed the training course on “Implementation of
Management standards in the Organization ISO 9001, ISO 14001,
OHSAS 18001 and SA8000” Jointly organized by Indian Register Quality
Systems , A department of Indian Register of Shipping and ZR Professionals
Bangladesh Limited, held at Dhaka, Bangladesh on 4th July,2004.

11. My Career in Brief:
Local Training (Cont’d)
 Satisfactorily completed the training course on “Research Methodology with
the Application of SPSS/WINDOWS” of two weeks in Bangladesh Institute of
Management, 4 Sobhanbag, Mirpur Road, Dhaka-1207, Bangladesh, May23-
June2,2005.
 Satisfactorily completed the training course on “General English” between the
dates November 11,2007 to January 08,2008, in British Council, Bangladesh .
 Satisfactorily completed the training course on “Competency based Training
System for TVET” for NPDP of 5 days on three weeks in ILO-GOB-EC,
Bangladesh, May-June, 2009.

12. My Career in Brief:
List of Proceedings
publication
 M.M. Rashid, M. H. Kabir and M. N. Islam, A Study on the Use of Rice Bran Oil
and Vegetable Oils as Renewable Sources of Energy and Alternative Fuel for
Lighting Purposes. Proceedings of the Sixth Annual Paper Meeting and the First International
Conference on Mechanical Engineering, February 18-20, 2000, Dhaka-1000, Bangladesh;
Paper No-4, pp. 22-29.
 M.M. Rashid and J.A. Naser, Computational Fluid Dynamics For Newtonian
Fluid Flow Through Concentric Annuli With Center Body Rotation,
Proceedings of the Fourth International Conference on Mechanical Engineering, December,26-28,
2001, Dhaka, Bangladesh, Volume-II, Section –IV (Fluid Mechanics), pp. 119-123 .
 M.M. Rashid and J.A. Naser, Non-Newtonian Fluid Flow Through Concentric
Annuli, Proceedings of the First BSME-ASME International Conference on Thermal Engineering,
31 December, 2001-2 January 2002, Dhaka, Bangladesh; pp. S46-S51.

13. Proceedings publication
(Cont’d)
 M.M. Rashid, Numerical Simulation - A Modern Concept of Chemical
Industries, In the Proceedings of the 1st Annual Paper Meet and International Conference on
Chemical Engineering, February 12, 2002, IEB Chandpur, Bangladesh , Paper No-7,
pp.72-77.
 M.M. Rashid, Engineering Functions in the 21st Century, Proceedings of the First
Annual Paper Meeting and the First International Conference on Electrical Engineering,
February 9, 2002, Rajshahi, Bangladesh, pp. 171-175.
 M . Manaf. And M.M. Rashid , Technical Challenge about Woodward
Governor’s Trouble Shooting and Rectification in Jamuna Fertilizer
Company Limited. Proceedings of the Seventh Annual Paper Meeting and the Second
International Conference on Mechanical Engineering, February15, 2002, IEB, Chittagong,
Bangladesh, Paper No.26, pp. 206-211.
 M.M. Rashid, Md Ayan Reza, Dewan al-Mamun, Effat Chowdhury Tonny , Safia
Habib and Rumana Rahman, Technology for Disable People Achieves
Millennium Development Goals: Bangladesh Perspectives, Proceedings of the
Twenty-first Indian Engineering Congress, December 22-24, 2006, Guwahati, Assam,
India, pp.315-318.

14. My Career in Brief: List of
Proceedings publication (Cont’d)
 M. Manaf and M.M. Rashid , A process upgrading of urea synthesis and high
pressure recovery section by reducing pressure from high pressure loop,
Proceedings of the national paper meeting on fertilizer sector, IEB, Rangadia, Chittagong,
Bangladesh, July 09, 2004, Paper No 1B, pp. 68-72.
 M.M. Rashid and Dr. Md Ashraful Islam, A Technical Proposal on Analyzing
Management Information Systems of the Jamuna Fertilizer Company Limited:
A case Study, Proceedings of the national paper meet on fertilizer sector at IEB Rangadia,
Chittagong, Bangladesh, July 09,2004, Paper No 1A, pp. 73-79.
 M.M. Rashid, Innovation of Programming Keyboard in Jamuna Fertilizer
Company Limited, Proceedings of the Eighth Annual Paper Meeting and the Third International
Conference on Mechanical Engineering, March 20-22, 2003, IEB, Ramna, Dhaka-1000,
Bangladesh; Abstract No.60.
 Rashid, M.M (2010), A Simulating functional and dysfunctional answer from
given Kano evaluation for Product Development, Proceedings of 1st International
Conference on Mechanical, Industrial and Energy Engineering 2010, 23-24, December, 2010,
Khulna, Bangladesh, paper No. MIE10-040, pp.1-6.

15. My Career in Brief: LIST OF
JOURNAL PUBLICATION
 Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2010). A Kano Model based
Computer System for Respondents determination: Customer Needs Analysis
for Product development Aspects, Management Science and Engineering, Vol.4 (4),
pp.70-74. 2010, (Canada); Retrieve from
http://www.cscanada.net/index.php/mse/article/view/1359/1378/pdf
 Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2010). A proposed
computer system on Kano Model for new product development and
innovation aspect: A case study is conducted by an attractive attribute of
automobile, International Journal of Engineering, Science & Technology, Vol.2(9),pp.1-12,
2010 (Nigeria); Retrieve from http://www.ijest-ng.com/vol2_no9/
 Rashid, M.M. (2010). A review of state-of –Art on Kano Model for Research
Direction , International Journal of Engineering, Science and Technology, Vol.2(12),
pp.7481-7490, 2010, (India) ; Retrieve from
http://www.ijest.info/docs/IJEST10-02-12-089.pdf

16. My Career in Brief: LIST OF
JOURNAL PUBLICATION
(Cont’d)
 Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2011). A Numerical Kano
Model for compliance customer needs with product development, Industrial
Engineering and Management System. Vol. 10 (2), pp140-153, 2011, (Korea); Retrieve
from http://www.kiie.org/iems/contents/vol10no2/10-2-08.pdf
 Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2011). A Kano Model
Based Linguistic Application for Customer Needs Analysis, International Journal
of Engineering Business Management, Vol.3 (2) pp29-36,2011, (Croatia); Retrieve from
http://www.intechopen.com/articles/show/title/a-kano-model-based-linguistic-applicatio
 Rashid, M.M. Ullah, A.M.M.S., Tamaki, J. and Kubo, A (2011). Evaluation of Hard
Materials using Eco-Attribute, Advanced Material Research Vol.325, pp693-698,2011,
(Switzerland) ; Retrieve from http://www.scientific.net/AMR.325.693

17. My Career in Brief: LIST OF
JOURNAL PUBLICATION
(Cont’d)
 Rashid, M.M. (2011). Management Information System of Jamuna Fertilizer
Company Limited: A Case Study, International Business and Management, Vol.3
(1),pp118-124, 2011, (Canada) ; Retrieve from
http://www.cscanada.net/index.php/ibm/article/view/j.ibm.1923847920110201.038/18
 Rashid, M.M. (2011). Management of Renewable Sources of Energy: A Case on
Rice Bran oil and Vegetable oils of Bangladesh Perspective, Energy Science and
Technology, Vol.2(1) pp62-67 2011 (Canada); Retrieve from
http://www.cscanada.net/index.php/est/article/view/j.est.1923847920110201.729/pdf

18. My Career in Brief: LIST OF
JOURNAL PUBLICATION
(Cont’d)
 Rashid, M.M (2011), CFD for non-newtonian CMC fluid flow through
concentric annuli with centre body rotation, International Journal on
Science and Technology, ISSN:2229-7677, Vol. 2(3):121-126 (India); Retrieve
from http://www.ijsat.in; password :MDMIIIII4
 Rashid, M.M. and Manaf, M.A (2011), Woodward Governor’s Trouble
shooting and Rectification: A Case on Jamuna Fertilizer Company
perspective, Bangladesh Research Publications Journal, ISSN:1998-2003,
Vol.5(4), pp381-386. July-August,2011 (Bangladesh); Retrieve from
http://www.bdresearchpublications.com/admin/journal/upload/09246/09246.p

19. My Career in Brief: LIST OF
JOURNAL
PUBLICATION(Cont’d)
 Rashid, M.M and Manaf, M.A (2011), Process upgrading of urea
synthesis: A Case on Jamuna Fertilizer Company Perspective,
Bangladesh Research Publications Journal, ISSN: 1998-2003,Vol.6(1): September -
October,2011 (Bangladesh); Retrieve from
http://www.bdresearchpublications.com/admin/journal/upload/
 Rashid, M.M. (2011). Technology for Disable People: A thinking for
Bangladesh Perspective, Bangladesh Research Publications Journal, ISSN:
1998-2003,Vol.6(2): 252-256, November-December,2011 (Bangladesh);
Retrieve from
http://www.bdresearchpublications.com/admin/journal/upload/
 Rashid, M.M (2011), Engineering Functions for Bangladesh Socio-
Economic Development Aspects, International Journal of Business and
Management Tomorrow, Vol. 1(1) :1-11; (India); Retrieve from
http://www.ijbmt.com/issue/35.pdf

20. My Career in Brief: LIST OF
JOURNAL
PUBLICATION(Cont’d)
 Rashid, M.M (2012), Computational Fluid Dynamics (CFD) for Chemical Industries, International
Journal of Advances in Engineering, Science and Technology,Vol.1(2): 252-256 (India) ;
http://www.ijaest.com/
 Ullah, A.M.M.S., Rashid, M.M. and Tamaki, J. (2012). On Some Unique Features of C-K
Theory of Design, CIRP Journal of Manufacturing Science and Technology, Vol.5 , No. 1:55-66,
2012, [Publisher: Elsevier Science]; (France); Retrieve from http://www.sciencedirect.com
 Rashid, M.M (2012), CFD for Newtonian Glucose fluid flow through concentric annuli with
centre body rotation , International Journal on Science and Technology,ISSN:2229- 7677, Vol. 3(1) (in-print)
(India); Retrieve from http://www.ijsat.in
 Rashid, M.M (2012), Proposed Research Direction for Sustainable SMEs in Bangladesh,
Bangladesh Research Publications Journal, ISSN: 1998-2003,Vol.6(3): 317-329, January–February ,2012
(Bangladesh); Retrieve from http://www.bdresearchpublications.com/admin/journal/upload/
09290/09290.pdf

21. ATTENDED VARIOUS SEMINAR
AND WORKSHOPS
 Attended a seminar on “Quality Control Implementation in
Construction Industries” Organized by Engineering Staff College,
IEB, Ramna, Dhaka dated 13 April,2004.
 Attended a seminar on “Psychosocial counseling” organized by Ain
O Salish kendra (ASK) and Bangladesh Institute of Management (BIM),
held on 26 June ,2004,2004 at BIM, Dhaka Campus.
 Attended a seminar on “Safe Building and Bangladesh National
Building Code” organized by Dhaka Centre of the Institution of
Engineers, Bangladesh (IEB), held on Saturday, 7 May 2005, at IEB
Head quarters, Ramna, Dhaka.
 Attended a seminar on “Prospect and problem of Small Medium
Enterprises (SME) of Bangladesh” organized by Mechanical
Engineering Division of of the Institution of Engineers, Bangladesh
(IEB), held on Monday, 27 June 2005, at IEB Head quarters, Ramna,
Dhaka.

22. ATTENDED VARIOUS SEMINAR
AND WORKSHOPS (Cont’d)
 Actively participated a Seminar on “The Second Annual Paper
Meet (APM’95)” in Rajshahi, September 28-30,1995, organized by
Mechanical Engineering Division, The Institution of Engineers
Bangladesh (IEB), HQ, Ramna, Dhaka-1000, hosted by IEB Rajshahi
Centre, Bangladesh.
 Attended a Seminar on “Optimal Energy Utilization with Vapor
Absorption Chillers” held at BUET, Dhaka, October 8, 1998,
Organized by the Centre for Energy studies, Bangladesh University of
Engineering and Technology, (BUET), Dhaka, Bangladesh.
 Attended a Seminar on “The Need For Rethinking About Our
Thinking System, parallel thinking method and Fourth
Generation Time Management System” held at Jamuna Fertilizer
Co. Ltd., Tarakandi, Jamalpur, Bangladesh Organized by EPSSW, IEB,
Headquarters, Ramna, Dhaka-1000 and IEB Tarakandi Sub-Centre on
June 02,1999.

23. ATTENDED VARIOUS SEMINAR
AND WORKSHOPS (Cont’d)
 Actively participated and presented a paper on “45th IEB Annual
Convention and Technical Session of Mechanical
Engineering” in Khulna, February17-19, 2000, organizd by IEB
Khulna Centre, Bangladesh.
 Actively participated and presented a paper on “National Paper Meet
on Fertilizer and Chemical Sector” in Rangadia, September 1,
2001, organized by IEB Rangadia, Centre Chittagong, Bangladesh.
 Actively participated and presented a paper on “The First Annual
Paper Meet and International Conference on Agricultural
Engineering ” in Mymensingh, October 20, 2001, jointly organized
by Agricultural Engineering Division, The Institution of Engineers
Bangladesh (IEB) and Federation of Engineering institutions of South and
Central Asia (FEISCA), hosted by IEB Mymensingh Centre, Bangladesh.

24. ATTENDED VARIOUS SEMINAR
AND WORKSHOPS (Cont’d)
 Successfully attended the a seminar on “ Pollution Control
Technology and Energy Saving” held at Jamuna Fertilizer
Co. Ltd., Tarakandi, Jamalpur, Bangladesh Organized by IEB,
Headquarters, Ramna, Dhaka-1000 and IEB Tarakandi Sub-
Centre on 23rd October,1999.
 Actively participated and attended on “the 48th IEB Annual
Convention of the Institution of Engineers, Bangladesh
and National Seminar on Poverty Reduction is the
Global Challenge” held at Dhaka, from January 20-22, 2004,
organized by IEB Dhaka Centre, Bangladesh.
 Attended a seminar on “ Telecommunication for Disaster
Management” organized by Electrical Engineering Division of
the Institution of Engineers, Bangladesh (IEB), held on Tuesday, 9
March 2004, at IEB Head quarters, Ramna, Dhaka.

25. List of Research Work in BIM
 Safety compliance in readymade garments Industry: A Case
study on TNZ apparels Ltd.
 Compliance through ISO9001:2000 in Stamford university
 A study on difference of life style & health knowledge
between urban and rural male college students
 A study on perception of mothers of 05 years children
toward Polio-free Bangladesh drive in a selected village.

26. List of Research Work in BIM (Cont’d)
 Compliance issues in readymade garments Industry
 Study on factors related with drug addiction among the
patients threaten in a private clinic, Dhaka.
 Quality control can ensure safety drinking water on context
Dhaka WASA.
 Safety health & welfare at Garment sector in Bangladesh

27. List of Research Work in BIM (Cont’d)
 Human resources Practices Karstadtquella International
 Study on Bangladesh Laws-2006
 Industrial relations between employee and employer of
Padma Poly cotton Knit fabrics Ltd
 Role of Total Quality Management in Human Resource
Management
 Occupational health & Safety benefit & welfare hazardous
problem & Prospect in tannery sector in Bangladesh

28. List of Research Work in BIM (Cont’d)
 Occupational health & Safety benefit & welfare hazardous
problem & Prospect in tannery sector in Bangladesh
 Human Resources Practices in Manarat International University
 The role of information technology in human resources : A case
study on HUAWEI Technologies (BD) Ltd
 Social compliance status in Readymade garments Sector for
employees Perspective: A case study on Venix Bangladesh Ltd.
 Compliance system of Fakir Knitwears Ltd: A Case Study
 A report on collection and selection of worker’s health security in
Garments Industries in Bangladesh.
 A study on Personnel Management in Bangladesh
 Recruitment and selection Process of PROSHIKA

29. List of Research Work in BIM (Cont’d)
 HR Practice in Interstoff Clothing Ltd
 Performance appraisal system of human resources of
Popular Life Insurance Co. Ltd.
 A study on quality of education between public and private
universities in Bangladesh
 A Study on Sickness of Small and Medium enterprise in
Bangladesh during 2000 to 2005 : HRM Perspective

30. List of Research Work in BIM (Cont’d)
 Recruitment , Selection & Training Procedure of Milton
trading International: A Garments Industry under labour law
Act 2006 of Bangladesh
 Recruitment and selection Process Causes of Company
Bankruptcy of Bangladesh Shilpa Bank Perspective:
1980-2006
 Alternative dispute resolution Project to dev HR through
Shushilon
 Job satisfaction of the employee of Golden Son Ltd.

31. List of Research Work in BIM (Cont’d)
 Training dev. Program of Cogito Marketing Solution Ltd
 HR training and development program of Grameen Phone
Ltd.
 Sales forecasting in Cement Industry in Bangladesh: Study
on Seven Ring Brand Cement
 Performance appraisal system of ICDDRB
 Performance appraisal system: A case study of Distribution
Deptt. Of Incepta Pharmaceuticals
 Performance appraisal system : A Comparative study among
three organizations

32. My Career in Brief: Name of
Training Program Conducted in
BIM
 Productivity and Competitiveness
 Productivity Improvement Techniques
 Project Management
 Critical Path Method using MS Project 2003
 Productivity and Competitiveness
 Certificate Course on computer Aided Project Management
 Certificate Course on Total Quality Control Through ISO 9001:2000 (TQM)
 Computer Aided Project Management using MS Project 2007
 Certificate Course on Total Quality Control Through ISO 9001:2008 (QMS)
 Instructional Techniques for Faculty of Aeronautical Institute of Bangladesh

33. My Career in Brief: List of
Subjects are Taught in BIM
 Safety Health and Welfare
 Applied Statistics
 Production and Operation Management

34. My Career in Brief: List of
Professional Organization
Linking as a Member
 The Institution of Engineers, Bangladesh
 Bangladesh Society of Mechanical Engineers
 Bangladesh Computer Society
 Institute of Personnel Management
 Bangladesh Society of Training and Development
 Japanese Society of Precision Engineering

35. My career in Brief: List of
University, where I taught as
an adjunct faculty
 BUBT
 IBAIS
 DIU: Dhaka International University
 BOU
 DIU: Darul Ihsan University
 BUET ( Teaching Assistance and Guest Speaker)

36. My Career in Brief:
Scholarships and Awards
1983-1984 Junior School Examination Merit Scholarship
Khansama, Dinajpur, Bangladesh
Government of the People’s Republic of Bangladesh
1985-1987 Secondary School Examination Merit Scholarship
Dinajpur, Bangladesh
Rajshahi Education Board, Rajshahi, Bangladesh
1988-1993 Higher Secondary School Examination Merit
scholarship
Rajshahi Education Board, Rajshahi, Bangladesh
November1994-May1996 National Science & Technology Fellowship
Ministry of Science & Technology
Government of the People’s Republic of Bangladesh

37. My Career in Brief:
List of Organization as an Enlisted
Consultant
 BGMEA for Curriculum development
 ILO for TVET Project

38. Now I am demonstrating ‘The
Core Training Objectives’:-
 1. PERSONAl
 1.1 To meet the global environment/challenge:
I am regular studying from
 Daily News Papers
 Different online Journals
 Engineering News of IEB

39. 1.2 Communication with others in a
work situation
Prior to start any Job: I consult with
 my supervisor
 Colleagues
 Guest Speaker
 Prospect Participants
Moreover , after completing a
Job/training/consultancy
 I maintain the record of the done Job.

40. 1.3 Team Work and Contribution
 In Jamuna Fertilizer Company Limited: I
have managed and supervised a group of
technician.
 In BIM: I have managed and coordinated
multi discipline people in training room.
 In Japan: I am doing PhD work with a
group people in the laboratory.

41. 1.4 Commitment to Profession
I am a
 Life fellow of IEB (F-7645)
 Member of BSME(M-02-28ME)
 Life member of BSTD (M-54)
 Life member of IPM
 Member of BCS (M-675)
Moreover, I held the following position:
 Local council member (2000-2004) of Tarakandi sub centre
 Joint secretary (2000-2004) of BCIC Engineers Association at JFCL
branch.
 Member of MED,IEB (2009-2010)
Beside, I have presented several number of papers at conferences and
published 17 papers in Journal, most of the papers are my working/job
evidence.

42. 1.5 Code of Ethics
 I am aware and respect of 13 points code of ethics of IEB.
 I have followed the rules and regulations as a presiding
officer of national election to parliament of Bangladesh of
2001.

43. 2. Engineering
2.1 Engineering Procedure
 In this regards, I have published 17 journal
papers to demonstrate a knowledge and
understanding of engineering procedures
including planning, programming,
progressing the implementation process.

44. 2.2 Engineering Problems
In JFCl,
 Process upgrading of Urea synthesis loop of JFCL
 MIS system of JFCL
 Rectification of WOODWARD Governor.
In Japan,
 Virtual customer needs analysis system

45. 2.3 Solution of Engineering Problems
I have solved many engineering problems, as follows:
 To solve any adjustment, calibrating, setting and trouble
shooting regarding turbine control system.
 To rectification works of any trouble of WOODWARD
Governor.
 To solve a problem of programming keyboard of urea
weighing machine.
 To develop a computer system to analysis customer needs.

46. 2.4 Management and Leadership
 I have attended the following activities as a supervisor in JFCL to
demonstrate engineering management and leadership:
 Valve maintenance
 Welding
 Heat exchanger repairing
 Refractory and insulation
 Precision and general fabrication
 Modification work
 Flange facing
 Turn around/overhauling

47. 2.4 Management and Leadership(Cont’d)
Moreover, following jobs were done at JFCL:
 To ensure economic and safe operation of the assigned plant.
 To ensure the production through efficiently, timely, safely.
 To suggest changing of the working conditions and use of
equipments to increase efficiency of the plants.

48. 3. Management and Economics
3.1 Contractual Form
In JFCL for overhaul maintenance work,
 I attended meeting regularly with the contractor’s (CNCC)
senior staff , where contractual issues were discussed and
solved within time and budget.
My detailed knowledge of the maintenance work,
 I would advised the contractor’s of my decision , they could
make any amendments to the drawings. Hence, many
contractual issues were solved.

49. 3.2 Project Management
 In JFCL,
 To ensure the assigned plant for the continuous and safe
operations .
 To ensure the proper implementation of higher authority’s
instruction for optimum operating conditions.
 In BIM,
 I have coordinated many training programs as a coordinator of
the training program.
 I have taught project management with MS project software in
connection with real life situations.

50. 3.3 MIS system
 In JFCL,
 A proposed planning of real MIS system in JFCL has published
in Journal .
Moreover in BIM, I have taught the MIS system/ERP , how to
planning, implement in any organizations to ensure transfer of
information in the work place situation.

51. 3.4 Financial Knowledge
In JFCL,
 I have gathered a knowledge and understanding of how work
is financed and how funds are obtained and managed.
 I have prepared yearly budget both for capital and
consumables.
 Within the budget provision, I have prepared both foreign
and local purchase requisition .

52. 3.5 Standards and Codes
In JFCL, after study I have designed and fabricated a tabular
heat exchanger of 140 sq. meter under ASME code , section-
V, Div-I.
In BIM, In my coordination,
I have taught ISO9001:2008 for creating international
standards quality management system

53. 3.6 Quality Plans
In JFCL,
 I have consulted with my supervisor to some extent with my
technicians.
 I have reviewed al the aspects relating to tools, equipments
and safety measures.
 A schedule was prepared consciously , which all party follow
strictly.
In BIM,
 I have taught Quality management System ( 9001:2008) ,
safety, health and welfare and TQM on the training program.

54. 3.7 Quality Assurance
In JFCL,
 After procurement, I have checked the quality of procured of
materials and certify for acceptance or not acceptance.
 Once, in my notice was come, some spares of Scraping
Reclaimer was undersized:
 Supplier endorsed it and requested me to take corrective
measure within our capacity at their cost.
 We have corrected those within acceptable range in our
workshop.

55. 3.8 Effective Uses of Resources
 In JFCL, in my leadership, using ‘fives Ms’-Men, method,
Materials, Machines and Money are contributed to achieve
the financial performance.
 In BIM, in my coordination, I have taught the following
training program to achieve competitiveness in the global
market:
 Productivity Improvement Techniques
 Productivity and Competiveness
 TQM and ISO 9001:2008

56. 4. Environment, Health and Safety
4.1 EIA: Environmental Impact Assessment
In JFCL,
 I have served as an incorporating environment and in
decision making for public interest and factors according to
the rules , called environment conservation,1997:
 To inspect JFCL for controlling environmental pollution.
 To monitor and supervise proper implementation of national a
forestation program in JFCL on regular basis.
 I have worked to run the plant properly for maintenance of
waste treatment plant.

57. 4.2 Safety in the work situation
In JFCL,
 I have taken responsibility for personal and collective safety
in work situation.
 I was instrumental in introducing a scheme to recognize
teams that had good safety records. It has created a growing
awareness of dangers in the workplaces and has reduced the
company’s accident record significantly.
In BIM,
 I am paper leader of safety , health and welfare for
PGDHRM/PGDPM

58. 4.3 Engineering Solutions
 I have published four papers regarding
engineering solutions of JFCL in compliance
with relevant regulations and best practice
concerning health, safety and risk .

59. 4.4 Manage and apply safe system
 I have manage and applied safe systems
in JFCL to follow rules and regulations
of JFCL.