This document provides a curriculum vitae for Dr. Md. Abid Ali, including his contact information, career objective, academic qualifications, work experience, participation in seminars and workshops, seminars organized, and published papers. Some key details: - Dr. Ali has a PhD from Andhra University and over 14 years of experience working in various roles in mechanical engineering departments at universities in India. - His academic qualifications include a BTech and MTech in Production Engineering. - He has participated in over 15 seminars and workshops related to mechanical engineering and organized 5 seminars on topics like composite materials and heat transfer. - Dr. Ali has published 10 papers in international journals and presented 10 papers at various

1. CURRICULUM VITAE
Dr.Md. Abid Ali email: mdabid_786@yahoo.co.in
H.NO.5-191 Phone: 091-08654 – 225244
Seetharampuram, Cell : 9441581156
Yadava Bazar,
Jaggayyapet,
Krishna District, A.P.
India.
Career Objective
To keep the expectation of the employer alive through hard work and loyalty resulting in
the achievement of both organization and personal goals.
Academic Qualification
Course Board/University Year of
Passing
Division % Marks
Secondary School
Certificate
Board of Secondary
Education, A.P
1992- 93 First 79.0
Intermediate Board of Intermediate
Education, A.P
1993-95 First 75.0
B.Tech
(Production Engg.)
V.R.Siddartha Engineering
College, Vijayawada
1996 – 2000 First 65.0
M.Tech
(Production Engg.)
Nagarjuna University 2002– 2004 First 67.0
Ph.D. Andhra University 2013 awarded
Experience: 14 Years
• Ratified as Associate Professor by JNTU staff selection Committee in the year 2010 .
2. Working as an Professor in Mechanical Engineering from K L University,Vijayawada
from July 20154 to till date.
2. Worked as an Associate Professor in Mechanical Engineering from K L
University,Vijayawada from February 2014 to june2015.
2. Worked as an Professor & Head of the Department in Mechanical Engineering from
Anurag Engineering College, Kodad from November 2012 to january2014.

2. 3.Worked as an an Assoc.Professor & Head of the Department in Mechanical Engineering &
Incharge Hod for Civil Engineering from Anurag Engineering College, Kodad from October
2010to November 2012.
4. Worked as an Assoc. Professor in Mechanical Engineering from Anurag Engineering
College, Kodad from July 2009toOctober2010.
45 Worked as Assistant Professor& Head of The Department in Aeronautical Engineering
from NIMRA Institute of Science & Technology, Vijayawada from October 2008 to
june2009.
6.. Worked as Assistant Professor& Head of The Department in Mechanical Engineering
from NIMRA College of Engineering & Technology, Vijayawada from July 2001 to October
2008.
7. Worked as a Lecturer in Mechanical Engineering in J.B. Institute of Technology,
Hyderabad from October 2000 to April 2001
Details of Participation in Seminar/ Work shops
Sl.
No.
Name of the Seminar/Work
Shop
Place Dates Role
1 One day work shop on
Flexible Automation in
Manufacturing
V.R. Siddhartha
Engineering College,
Vijayawada.
17th December
1999
Participant
2 Short term Intensive Course on
CAD/CAM
Vignan’s Engineering
College,
Vadlamudi, Guntur
21.06.2004 to
25.06.2004
Participant
3 National work shop on “Simulation
of Manufacturing Systems
National Institute of
Technology
Warangal
07.10.2004 to
09.10.2004
Participant
4 AICTE – ISTE sponsored
short term training program me on
Precision Manufacturing and
Nanotechnology (PAN)
P.E.S. College of
Engineering,
Mandya, Karnataka
22.11.2004 to
03.12.2004
Participant
5 One Day workshop on “Computer
Numerical Controls and Flexible
Manufacturing Systems”
P.V.P. Siddhartha
Institute of
Technology,
Vijayawada.
16th and
17-10-2005
Participant

3. 6 One Day National workshop on
“APPLICATIONS OF
OPTIMIZATION TECHNIQUES
IN INDUSTRIAL ENGINEERING
- OPTECH ‘05”
Koneru Lakshmaiah
College of Engg.
Vijayawada
10-12-2005 Participant
7 A Workshop on “Genetic
Algorithms for Mechanical
Engineering Optimization
problems”
National Institute of
Technology, Warangal
3-3-2006 to
5-3-2006
Participant
8. A Workshop on “Advances in
Composite Materials”.
Vignan’s Engineering
College,
Vadlamudi, Guntur
28.06.2008 to
30.06.2008
Participant
9. Two days National Seminar on
“Application Of Soft Computing
Tools in Mechanical Engineering”.
V.R. Siddhartha
Engineering College,
Vijayawada.
28.01.2008 to
29.01.2008
Participant
10. Two days National Workshop on
“Advances in Computational
Structural Mechanics using Finite
Element Method”.
V.R. Siddhartha
Engineering College,
Vijayawada
6 & 7th February
2008.
Participant
11. Advances in Manufacturing
Processess
National Institute of
Technology, Warangal
08.08.2008 to
10.08.2008
Participant
12. Three days International
Conference on Fascinating
Advancement in Mechanical
Engineering.
MEPCO SCHLENK
ENGINEERING
COLLEGE, Sivakasi
11.12.2008 to
13.12.2008
Participant
13. Applications of Design of
Experiments and FEM Techniques
in Mechanical Engineering
KITS, Singapur,
Karimnagar
07.02.2009 Participant
14. STTP on Condition Monitoring of
Mechanical Systems
GITAM
University,Vizag
16.03.2009 to
21.03.2009
Participant
15. One day National Workshop on
Advanced Manufacturing Systems
JNTU, Kakinada 25.03.2009 Participant
16 ISTE 42nd
Annual Convention Anurag Group of
Institutions,Hyderabad
20-12-2012 to
22-12-2012
Participant

4. Seminar/ Work shops Organised:5.
Elements of Heat Transfer By Dr G.Amarender Rao,Prof&HOD,VBIT,Hyd. in the month of
March,2013.
.CFD&Its Applications by Mr.D.Srinivas ,N.S.Technologies,Hyd in the month of March,2013.
• Mechanical Engineering Association (MECHNOMICZ) Conducted One Seminar on Science
Behind the metals&Materials by Dr. N Eswar Prasad, Director,DRDO,Hyderabad.in the of
August,2012.
• Conducted one day seminar on composite materials advanced systems by Dr. G.V.RAO on
23.08.2013.
• Conducted One day on seminar advances behind the development of metals and materials by
Dr. N. Eshwara prasad on 17.08.2013.
• Conducted one day workshop on Advances in mechanical engineering by Dr. G.Vijay Kumar
as a part of faculty development program on 20.07.2013..
• Work shop on FEM for the III Mechanical students in July 2013.
• Seminar on composites for the IV Mechanical students in August 2013.
• A National Conference on advances in mechanical Engineering for the all Mechanical
students in September 2013.
Papers presented:10
1.Presented paper on “Expert systems approach for selection of material handling
equipment in FMS National Conference on Emerging Trends in Concurrent Engineering
January 15-16, 2005 Organized by Department of Mechanical Engg. NIT ROURKELA,
ORISSA.

5. 2.Paper presented on Fatigue Analysis of Weldments. National Conference, RTDMT 2005,
March 17-18th 2005 Kumarguru College of Technology, COIMBATORE, Tamilnadu State,
India.
3.Paper presented on Fracture Analysis of Weldment National Conference, CAME – 2005,
21st December, 2005 JNTU College of Engineering, Anantapur, Andhra Pradesh State, India.
4.Paper presented on Free Vibrations Analysis of Thin FRP Laminated Composite Plates
using FEM. International Conference, ICADM– 2007, 9th to 11, August, 2007, Sethu Institute
Of Technology,Pulloor,Kariapatti, Tamil Nadu, India.
5.Paper presented on Micro Mechanical Analysis of FRP Composite Lamina for Thermal
Loading. International Conference, ICRTME– 2007, 4th to 6, October-2007, Ujjain Engineering
College, Ujjain, India.
6.Paper presented on Finite Element Simulation of Thick FRP Laminated Composite
Beam With Simply Supported End Conditions. National Conference, AMMP– 2007, 5th to 6,
October, 2007, University B.D.T. Engineering College, Davengere, Karnataka, India.
7.Paper presented on Micro Mechanical Analysis of FRP Composite Lamina for Thermal
Loading.National Conference, RAIME– 2008, 20th to 21st, March- 2008, National Engineering
College, Kovilpatti, Tamil Nadu, India.
8.Paper Presented on Wood Polymer Composites: A Review, National Conference, GTMTS-
2010, March-2010, Sethu Institute Of Technology,Pulloor,Kariapatti, Tamil Nadu, India.
9. Paper Presented on Determination of Wear Strength of Cork wood PolyAcrlonitrile
Composites, National Conference, AIME-2012, Febraury-2012, Kamala Institute Of
Technology and Science,Karim Nagar, Andhra Pradesh, India.
10. Paper Presented on Spectral Investigation of Structural and Optical Properties of
Mechanically Synthesized MoO3 Nano Powders, National Conference, AMMS-2015, 28th
November-2015, Vishnu Institute of technology ,Bhimavaram,Andhra Pradesh, In
JOURNALS:
Published papers in the international journals – 10

6. [1] DETERMINATION OF IMPACT STRENGTH OF POP AND SAW DUST COMPOSITE
LAMINATE "authorized by Mohammed Abid Ali has been published for publication in
International journal of scientific computing “Serials publications, New Delhi".
[2] DETERMINATION OF THERMAL CONDUCTIVITY OF PLASTER OF PARIS
"authorized by Mohammed Abid Ali has been published for publication in INTERNATION E-
JOURNAL OF MATHEMATICS AND ENGINEEING journal” 52(2010)528-531.
[3] Md. Abid Ali, Dr. K.N.S. Suman, Dr. V.V.S. Kesava Rao, “Mechanical and Thermal
Properties of Indian Cork Wood PolyAcrlonitrile Composites”, Journal of Automotive
Mechanical &Aerospace Engineering Research ISSN:2229-9270, March, 2011.
[4] Mohammed Abid Ali and V.V.S. Kesava Rao, “Compressive Strength of Neem, Mango and
Cork Wood Poly Acrylonitrile Composites”, International journal of Engineering Research and
Technology, ISSN:0974-3154, Vol.4, No.4, pp.391-399, 2011
[5] Mohammed Abid Ali, Dr. K. N.S Suman and V.V.S. Kesava Rao, “Thermal behaviour of
Cork, Mango and Neem Wood Polyacrlonitrile Composites Thermogravimetric Analysis in Inert
Atmosphere”, acceptance of your Manuscript/Research paper for publication in International
journal on Mechanical & Automobile Engineering (IJMAE) ISSN:0974-231X. (Acceptance
Code: SERC-IJMAE-JBBN11-03-21N).
[6]. MD. ABID ALI, DR. K.N.S. SUMAN, DR. V.V.S. KESAVA RAO, “STUDY OF
MECHANICAL PROPERTIES OF WOOD POLYACRYLONITRILE COMPOSITES”,
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY.
[7] Md. Abid Ali, Dr. K.N.S. Suman, Dr. V.V.S. Kesava Rao, “Thermal Analysis of Neem
Wood Polyacrylonitrile Composites”, IJETSE International Journal of Emerging Technologies in
Sciences and Engineering, Vol., No.(accepted).
[8] Dr MD. ABID ALI, “Mechanical Properties Of slag Reinforced Polymer Composites”
,International Journal Of Mechanical And Production Engineering Research And
Development.ISSN:2249-6890 IN AUG 2013.
[9]. Dr MD. ABID ALI, “Finite Element Analysis of Glass/Epoxy Composite Laminates with
Different Types of Circular Cutouts”,Indian Journal Of Applied Research. Volume : 3 Issue : 6
June 2013 SSN – 2249-555X

7. [10]. Dr MD. ABID ALI, “ Thermal Characterization of Neem and Cork Wood Polyacrylonitrile
Composites”Global Journal of Researches in Engineering: A Mechanical and Mechanics
Engineering Volume 14 Issue 3 Version 1.0 Year 2014
Vocational Training :
1.CNC Turning/CNC Milling Training course using MTAB & Denford
Equipment at the MTAB – DENFORD Technology Centre Chennai, India from 15.04.2003 to
19.04.2003,
2.Organizational Orientation at Petrofac Chennai, India from 23rd
June to 26th
June 2015.
3.First Convection On Quality Concepts Thirupathi Chapter-2015, India.
Subject Taught-U.G:
Engineering Graphics, Engineering Mechanics, Metallurgy & Materials Science, Instrumentation
& Control System, Production Technology – 1, Operations Research, Optimization Techniques,
Management science, Managerial Economics and Financial Analysis, Metrology, CAD/CAM,
Mechanical Handling Equipment’s, Introduction to Aeronautical Engineering, Aerospace
Materials and Composites, , Finite Element Modeling and Methods, Power Plant Engineering,
Mechanics of Solids, Machine Tools, Machine Drawing, Reverse Engineering &Rapid
Prototyping, Robotics, Cellular Manufacturing Systems
Subject Taught-P.G:M.Tech (CAD/CAM)
Manufacturing methods and mechanics of composites, Computer Aided Manufacturing,
Automation in Manufacturing.
Projects Guided:
M.Tech-4 B.Tech-15
P.hD guidance:4 .
Personal Details:
Sex : Male
Date of Birth and age : 15.06.1978
Marital Status : Married

8. Religion : Muslim
Nationality : Indian
Languages Known : English, Telugu, and Hindi & Urdu
References
Dr. V.V.S. Keshava Rao, Professor in AU College of Engineering, Vizag
Dr. Ch.Srinivas Rao,Associate Professor in AU College of Engineering, Vizag
Dr.Md. Abid Ali