Uable to do ssh from the RedHat Linux machine to Netapp filer 7 mode storage system throwing the error message as "Unable to negotiate with 10.150.10.10 port 22: no matching cipher found. Their offer: 3des-cbc"
•Download as DOCX, PDF•
0 likes•852 views
Unable to access Netapp Filer by ssh from the RedHat Linux machine throwing the error message as "Unable to negotiate with 10.150.10.10 port 22: no matching cipher found. Their offer: 3des-cbc
Report
Share
Report
Share
![Uable to ssh NetAppfiler7 mode storage system from the RedHat Linuxmachine throwingthe error
message as below,but it is pingable.
[root@smbserver~]#ssh root@10.160.10.10
Unable to negotiate with 10.160.10.10 port 22: no matchingcipherfound.Theiroffer:3des-cbc
[root@smbserver~]#ssh 10.160.10.10
Unable to negotiate with10.190.196.62 port 22: no matchingcipherfound.Theiroffer:3des-cbc
[root@smbserver~]#ping10.150.10.10
PING10.160.10.10 (10.160.10.10) 56(84) bytesof data.
64 bytesfrom10.160.10.10: icmp_seq=1 ttl=128 time=155 ms
Solutions-:
First of all,make an entrythe hostname ofthe RedHat Linux machine IP and host informationas
below
Netapp1>wrfile /etc/hosts
#Auto-generatedbysetupWedJun20 16:28:23 GMT 2018
127.0.0.1 localhostlocalhost-stack
127.0.10.1 localhost-10localhost-bsd
127.0.20.1 localhost-20localhost-sk
10.160.10.11 Netapp1-aNetapp1-a-e0M
# 0.0.0.0 Netapp1-a-e0P
10.160.10.10 Netapp1-a-e0a
192.168.230.131 smbserver.abc.comsmbserv (IPand host name of the RedHat Linux Machine)
Thenpress Ctrl+C (tosave the contentof the rdfile /etc/hostsinthe netappControllerof boththe
nodes)
Afterthat goto the RedHatLinux Machine and enable anoptioninthe /etc/ssh/ssh_config file
[root@smbserver~]#vi /etc/ssh/ssh_config](https://image.slidesharecdn.com/uabletosshnetappfiler7modestoragesystemfromtheredhatlinuxmachinethrowingtheerrormessageasbelow-180627111253/85/Uable-to-do-ssh-from-the-RedHat-Linux-machine-to-Netapp-filer-7-mode-storage-system-throwing-the-error-message-as-Unable-to-negotiate-with-10-150-10-10-port-22-no-matching-cipher-found-Their-offer-3des-cbc-1-320.jpg)
![We needtouncommentthe blowline whichare bydefaultina# followedbythe below line.
Ciphersaes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
Thendo sshfrom the RedHatLinux machine toNetappFilerbyusingthe hostname orIP addressaswe
have mentionedbothinthe /etc/hostsfile itcanbe accessible byIPandHostname.
[root@smbserverssh]#sshroo@Netapp1-a
The authenticityof host'munc1netapp1-a(10.190.196.11)' can't be established.
RSA keyfingerprintisSHA256:i5efLTF25Yyj8iWYmT8gDjwy27zaFoX3IhHtJGFeNH0.
RSA keyfingerprintisMD5:da:4c:59:0b:e5:9c:75:bb:07:86:24:9d:1a:e0:5b:b1.
Are you sure youwant to continue connecting(yes/no)?yes
Warning:Permanentlyadded'munc1netapp1-a, 10.160.10.10 (RSA) to the listof knownhosts.
root@netapp1-a'spassword:
Please provide the passwordof the NetAppstorage system andaccessit.
Thank you!!!!Saroj](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Безопасность интернет-приложений осень 2013 лекция 7
This document outlines the steps of a DNS request from a user's computer to resolve a domain name, including the initial DNS query to the root server, subsequent queries to TLD servers and authoritative name servers, and the final response returned to the user. It also shows ARP requests made to determine the MAC address of the local gateway router when establishing a connection.
Server
This document contains configuration settings for a VPN server using the OpenVPN protocol. It specifies UDP as the transport protocol, port 1194 for the service, and assigns dynamic IP addresses and routes to multiple clients on the 10.0.0.0/24 subnet. It also defines TLS encryption settings and key files for authentication of the server.
Tomáš Čorej - OpenSSH
OpenSSH is a free software suite that implements secure, remote login and file transfer capabilities using the SSH protocol. It provides a secure replacement for older protocols like telnet, FTP, and rlogin. OpenSSH allows for remote login, file transfer, port forwarding, X11 forwarding, and more. It offers strong security features like public-key authentication and encrypted connections.
Log
The document contains log entries from Nero burning software. It lists the software and hardware versions used, details about the burning process such as settings and tracks, and indicates that the burn was aborted by the user due to insufficient free space on the disc.
Creating qmgr and allowing remote authorization
IBM MQ V8, Enable Remote Access on Queue Manager, Allowing Remote connections, Connecting Remote Queue manager in Windows using MQ Explorer step by step process, Implementing enable Remote connections on Queue manager using commands, IBM MQ commands for creating Queue manager and creating objects in Linux
Setting ubuntu server sebagai pc router
The document provides steps to configure an Ubuntu server as a router for a PC. It involves enabling the root account, configuring TCP/IP and DNS settings for two Ethernet interfaces, enabling IP forwarding, setting up NAT rules to allow a client access to the internet, and testing the connectivity between the server and client and to external websites.
Basic dns-mod
This document discusses advanced DNS topics including DHCP auto-updates, DNS security techniques like restricting zone transfers and using IP or crypto controls, the importance of running closed recursive resolvers to prevent DDoS amplification attacks, and other DNS uses like DNS blacklists and ENUM. It provides best practices for DNS configuration including not mixing authoritative and caching servers, explicitly configuring options rather than relying on defaults, and being consistent with zone file formatting including proper use of the $ORIGIN directive.
3 manual installation of open vpn
The document provides steps to install and configure OpenVPN on CentOS to create a VPN server. It describes installing required packages, setting up bridging and network interfaces, generating certificates using EasyRSA, configuring iptables, and writing server and client configuration files.
Recommended
Безопасность интернет-приложений осень 2013 лекция 7
This document outlines the steps of a DNS request from a user's computer to resolve a domain name, including the initial DNS query to the root server, subsequent queries to TLD servers and authoritative name servers, and the final response returned to the user. It also shows ARP requests made to determine the MAC address of the local gateway router when establishing a connection.
Server
This document contains configuration settings for a VPN server using the OpenVPN protocol. It specifies UDP as the transport protocol, port 1194 for the service, and assigns dynamic IP addresses and routes to multiple clients on the 10.0.0.0/24 subnet. It also defines TLS encryption settings and key files for authentication of the server.
Tomáš Čorej - OpenSSH
OpenSSH is a free software suite that implements secure, remote login and file transfer capabilities using the SSH protocol. It provides a secure replacement for older protocols like telnet, FTP, and rlogin. OpenSSH allows for remote login, file transfer, port forwarding, X11 forwarding, and more. It offers strong security features like public-key authentication and encrypted connections.
Log
The document contains log entries from Nero burning software. It lists the software and hardware versions used, details about the burning process such as settings and tracks, and indicates that the burn was aborted by the user due to insufficient free space on the disc.
Creating qmgr and allowing remote authorization
IBM MQ V8, Enable Remote Access on Queue Manager, Allowing Remote connections, Connecting Remote Queue manager in Windows using MQ Explorer step by step process, Implementing enable Remote connections on Queue manager using commands, IBM MQ commands for creating Queue manager and creating objects in Linux
Setting ubuntu server sebagai pc router
The document provides steps to configure an Ubuntu server as a router for a PC. It involves enabling the root account, configuring TCP/IP and DNS settings for two Ethernet interfaces, enabling IP forwarding, setting up NAT rules to allow a client access to the internet, and testing the connectivity between the server and client and to external websites.
Basic dns-mod
This document discusses advanced DNS topics including DHCP auto-updates, DNS security techniques like restricting zone transfers and using IP or crypto controls, the importance of running closed recursive resolvers to prevent DDoS amplification attacks, and other DNS uses like DNS blacklists and ENUM. It provides best practices for DNS configuration including not mixing authoritative and caching servers, explicitly configuring options rather than relying on defaults, and being consistent with zone file formatting including proper use of the $ORIGIN directive.
3 manual installation of open vpn
The document provides steps to install and configure OpenVPN on CentOS to create a VPN server. It describes installing required packages, setting up bridging and network interfaces, generating certificates using EasyRSA, configuring iptables, and writing server and client configuration files.
Как HeadHunter удалось безопасно нарушить RFC 793 (TCP) и обойти сетевые лову...
В какой-то момент 3-й в мире работный сайт начал периодически падать на несколько минут. Сюрпризом стало то, что в этот раз действительно из-за сети.
Для масштабирования сервисов и их взаимодействия между собой hh.ru использует внутренний балансировщик. Обработку 25 тыс. запросов в секунду обеспечивают 5 серверов с nginx. Обращение к этим серверам балансирует коммутатор.
Я расскажу, как мы расследовали серию инцидентов, которая была вызвана нарушением протокола TCP при балансировке. И что мы придумали, чтобы продолжить безнаказанно его нарушать.
Как HeadHunter удалось безопасно нарушить RFC 793 (TCP) и обойти сетевые лову...
В какой-то момент 3-й в мире работный сайт начал периодически падать на несколько минут. Сюрпризом стало то, что в этот раз действительно из-за сети.
Для масштабирования сервисов и их взаимодействия между собой hh.ru использует внутренний балансировщик. Обработку 25 тыс. запросов в секунду обеспечивают 5 серверов с nginx. Обращение к этим серверам балансирует коммутатор.
Я расскажу, как мы расследовали серию инцидентов, которая была вызвана нарушением протокола TCP при балансировке. И что мы придумали, чтобы продолжить безнаказанно его нарушать.
Tomasz P from Poland
Tcpdump is a command line packet analyzer that allows users to intercept and display TCP/IP and other network packets. It can be used to debug applications that use the network, analyze network setups, and intercept unencrypted network traffic passing through systems with appropriate privileges. Tcpdump displays captured packets and allows filtering by protocol, port, or other criteria using command line flags.
Basic command for linux
This document provides an overview of basic Linux commands for tasks like file management, installation, networking, compression, searching, SSH, permissions and more. It explains commands for changing directories, listing files, copying/moving files, installing packages, pinging hosts, compressing files and directories, searching for patterns, remote login via SSH, and managing processes and system information.
5 issues
This document discusses several common problems encountered with TCP sockets, connections, and memory usage. Solutions provided include increasing socket backlog limits, connection tracking limits, adjusting TIME_WAIT settings, and scaling memcached with multiple processes instead of threads.
How install nagios in ubuntu 15.04, 16.04
The document provides instructions for installing and configuring Nagios on an Ubuntu 15.04 server to monitor the localhost and other servers. It outlines steps to install required packages like Apache, MySQL, PHP, SNMP and Nagios. It also explains how to add users, configure hosts and services, edit configuration files, restart services and access the Nagios web interface.
TechTalkThursday 29.06.2017: Wie verhält sich DDoS in der Realität?
Hast du dich jemals gefragt, wie eine DDoS-Attacke aus der Perspektive eines Hosting-Providers aussieht? Unser Senior Linux Operations Engineers, Patrick Hunziker zeigt, welche Attacken wir bereits erlebt und welche Massnahmen wir ergriffen haben.
PENYELESAIAN SOAL UKK/UPK TAHUN 2018 Paket 3 oleh Walid Umar
The document describes steps to configure a server to provide network services including DHCP, DNS, FTP, Samba file sharing, Apache web server, MySQL, mail server, and SquirrelMail webmail. Key services configured are Bind DNS, ProFTPD FTP, Samba file sharing, Apache web server, Postfix mail server, and SquirrelMail webmail. Network interfaces are configured and services are enabled, configured and tested.
How to get ce license at the rbs through moshell
The document provides instructions for obtaining CE licenses from the RBS system through MOSHELL in 3 steps:
1) To get a CE license for a particular site, check the site's existing license status and capacity.
2) To get CE licenses for all sites, use the "mobatch" command to run a command like "cat /c/license/licensekeys.xml" across multiple sites simultaneously.
3) To get CE licenses for more than 5 sites at a time, create a file with the site list, run it through the "mobatch" command followed by the license checking command. This will run the command across numerous sites in parallel.
Log
This document summarizes the results of an attempted CD/DVD burn using Nero burning software. The burn was aborted by the user after Nero determined there was not enough free space on the DVD-R disc to write the 6.688 MB of data. Nero provided details of the drive, software version, burn settings, and activities taken during the attempted burn process.
Instalasi Network Monitoring System (Nagios) Ubuntu 12.04
The document provides steps to install and configure Nagios3 monitoring on Ubuntu 12.04. It involves installing Nagios3 and Apache2 packages, configuring host definitions and services to monitor for three hosts, grouping the hosts, defining service checks, and restarting Nagios after configuration. Finally, a username and password are set up to access the Nagios web interface and confirm monitoring of the three hosts.
One key sheard site to site open vpn
The document describes the configuration of an OpenVPN site-to-site VPN tunnel between two networks (Side A and Side B). Key steps include generating and sharing a security key between the sites, configuring firewall rules and routing on each side, and starting the OpenVPN service to establish the encrypted tunnel between the 10.0.0.1 and 10.0.0.2 addresses. Once configured, connectivity between the 192.168.1.0/24 and 192.168.2.0/24 networks can be tested using ping and traceroute.
Linux Server Start
This document provides an overview of common commands, configurations, and tools used for deploying projects on Linux servers including CentOS. It covers setting up networking, remote access, domains, Java, MySQL, web containers like Tomcat and GlassFish, web servers Apache and Nginx, time synchronization with NTP, automatic startup of services, and firewall management.
Nessus scan report using microsoft patchs scan policy - Tareq Hanaysha
A Nessus vulnerability scan was performed on a host named "tareq-laptop" between 15:19 and 15:20 on November 17, 2008. The scan found 19 open ports but no vulnerabilities rated as high, medium, or low risk. Details provided include the operating system, NetBIOS name, and DNS name which were all listed as unknown. Each of the 19 open ports found are also listed.
Konfigurasi Server Gateway dengan fitur PROXY, WEBSERVER dan DHCP
This document provides instructions for completing a competency test on networking skills. It details how to:
1) Plan a network topology with a server, gateway, and client devices.
2) Perform subnetting calculations to divide IP addresses into public and private networks.
3) Assemble and install a Debian server, configure networking and services like DHCP, Apache, and Squid proxy server.
4) Configure the router and firewall rules for network address translation and proxy access.
Linux Networking Commands
This document provides an overview of common Linux networking commands such as ifconfig, route, traceroute, nslookup, arp, dig, and netstat that are used to configure network interfaces, display routing tables, trace network routes, lookup domain names, manage address resolution, query DNS servers, and view network statistics. It also discusses how to use ifconfig to assign IP addresses to interfaces, route to view routing tables, arp to manage the address resolution cache, and dig for more powerful DNS lookups than nslookup.
Linux router
The document describes how to configure a Linux machine as a router to connect two subnets. It provides instructions to enable IP forwarding and configure the network interfaces using temporary and permanent methods.
The summary is:
- Enable IP forwarding and configure the network interfaces of two Ethernet cards using ifconfig to set up routing temporarily
- Use netconf to configure the interfaces and routing permanently by editing settings, accepting changes, and rebooting to confirm the configuration persists
- Install traffic generator programs on end stations to test routing of UDP and TCP packets between subnets going through the router
Network commands
The document discusses various Linux network configuration and troubleshooting commands, including ifconfig for configuring network interfaces and viewing network settings, ping for testing network connectivity, traceroute for tracing the network route to a destination, and commands like netstat, dig, nslookup, route, host, arp, ethtool, iwconfig, and hostname for additional network tasks and information retrieval. It provides examples and brief explanations of how to use each command.
05 module managing your network enviornment
Upon reading the document, the key steps in a router's start-up process can be summarized as follows:
1. When power is applied, the router performs a power-on self-test and loads the bootstrap code from ROM to initialize hardware and find the IOS image.
2. The IOS image is then loaded from flash memory or another source such as TFTP into RAM where it is decompressed and executed.
3. The startup configuration is loaded, typically from NVRAM. If no configuration is present, the router enters setup mode to configure initial settings.
Hack The Box Nest 10.10.10.178
I have some fun with HackTheBox machine with the Nest (the easy one) and do a note with Write-ups style.
--
Mod
Linux Network commands
This document provides an overview of various networking tools in Linux, including commands for network configuration (ifconfig, route), connectivity testing (ping, traceroute), name resolution (host, nslookup), port and protocol inspection (netstat, tcpdump), and secure remote access (SSH, PuTTY). It also covers tools for firewall management (ufw), network mapping (Nmap), raw socket programming (netcat), link status (ethtool), and more. Examples are given for common tasks like viewing routing tables, capturing packets, remotely controlling systems, and accessing services over Telnet versus SSH. A references section at the end provides additional learning resources.
[오픈소스컨설팅] Linux Network Troubleshooting
The document discusses Linux networking commands and tools. It provides examples of using ip commands to view and configure network interfaces, routes, neighbors, and rules. It also shows tcpdump for packet capture and nmap for port scanning. Firewalls are configured using iptables to allow traffic from a specific source to a web server port.
More Related Content
What's hot
Как HeadHunter удалось безопасно нарушить RFC 793 (TCP) и обойти сетевые лову...
В какой-то момент 3-й в мире работный сайт начал периодически падать на несколько минут. Сюрпризом стало то, что в этот раз действительно из-за сети.
Для масштабирования сервисов и их взаимодействия между собой hh.ru использует внутренний балансировщик. Обработку 25 тыс. запросов в секунду обеспечивают 5 серверов с nginx. Обращение к этим серверам балансирует коммутатор.
Я расскажу, как мы расследовали серию инцидентов, которая была вызвана нарушением протокола TCP при балансировке. И что мы придумали, чтобы продолжить безнаказанно его нарушать.
Как HeadHunter удалось безопасно нарушить RFC 793 (TCP) и обойти сетевые лову...
В какой-то момент 3-й в мире работный сайт начал периодически падать на несколько минут. Сюрпризом стало то, что в этот раз действительно из-за сети.
Для масштабирования сервисов и их взаимодействия между собой hh.ru использует внутренний балансировщик. Обработку 25 тыс. запросов в секунду обеспечивают 5 серверов с nginx. Обращение к этим серверам балансирует коммутатор.
Я расскажу, как мы расследовали серию инцидентов, которая была вызвана нарушением протокола TCP при балансировке. И что мы придумали, чтобы продолжить безнаказанно его нарушать.
Tomasz P from Poland
Tcpdump is a command line packet analyzer that allows users to intercept and display TCP/IP and other network packets. It can be used to debug applications that use the network, analyze network setups, and intercept unencrypted network traffic passing through systems with appropriate privileges. Tcpdump displays captured packets and allows filtering by protocol, port, or other criteria using command line flags.
Basic command for linux
This document provides an overview of basic Linux commands for tasks like file management, installation, networking, compression, searching, SSH, permissions and more. It explains commands for changing directories, listing files, copying/moving files, installing packages, pinging hosts, compressing files and directories, searching for patterns, remote login via SSH, and managing processes and system information.
5 issues
This document discusses several common problems encountered with TCP sockets, connections, and memory usage. Solutions provided include increasing socket backlog limits, connection tracking limits, adjusting TIME_WAIT settings, and scaling memcached with multiple processes instead of threads.
How install nagios in ubuntu 15.04, 16.04
The document provides instructions for installing and configuring Nagios on an Ubuntu 15.04 server to monitor the localhost and other servers. It outlines steps to install required packages like Apache, MySQL, PHP, SNMP and Nagios. It also explains how to add users, configure hosts and services, edit configuration files, restart services and access the Nagios web interface.
TechTalkThursday 29.06.2017: Wie verhält sich DDoS in der Realität?
Hast du dich jemals gefragt, wie eine DDoS-Attacke aus der Perspektive eines Hosting-Providers aussieht? Unser Senior Linux Operations Engineers, Patrick Hunziker zeigt, welche Attacken wir bereits erlebt und welche Massnahmen wir ergriffen haben.
PENYELESAIAN SOAL UKK/UPK TAHUN 2018 Paket 3 oleh Walid Umar
The document describes steps to configure a server to provide network services including DHCP, DNS, FTP, Samba file sharing, Apache web server, MySQL, mail server, and SquirrelMail webmail. Key services configured are Bind DNS, ProFTPD FTP, Samba file sharing, Apache web server, Postfix mail server, and SquirrelMail webmail. Network interfaces are configured and services are enabled, configured and tested.
How to get ce license at the rbs through moshell
The document provides instructions for obtaining CE licenses from the RBS system through MOSHELL in 3 steps:
1) To get a CE license for a particular site, check the site's existing license status and capacity.
2) To get CE licenses for all sites, use the "mobatch" command to run a command like "cat /c/license/licensekeys.xml" across multiple sites simultaneously.
3) To get CE licenses for more than 5 sites at a time, create a file with the site list, run it through the "mobatch" command followed by the license checking command. This will run the command across numerous sites in parallel.
Log
This document summarizes the results of an attempted CD/DVD burn using Nero burning software. The burn was aborted by the user after Nero determined there was not enough free space on the DVD-R disc to write the 6.688 MB of data. Nero provided details of the drive, software version, burn settings, and activities taken during the attempted burn process.
Instalasi Network Monitoring System (Nagios) Ubuntu 12.04
The document provides steps to install and configure Nagios3 monitoring on Ubuntu 12.04. It involves installing Nagios3 and Apache2 packages, configuring host definitions and services to monitor for three hosts, grouping the hosts, defining service checks, and restarting Nagios after configuration. Finally, a username and password are set up to access the Nagios web interface and confirm monitoring of the three hosts.
One key sheard site to site open vpn
The document describes the configuration of an OpenVPN site-to-site VPN tunnel between two networks (Side A and Side B). Key steps include generating and sharing a security key between the sites, configuring firewall rules and routing on each side, and starting the OpenVPN service to establish the encrypted tunnel between the 10.0.0.1 and 10.0.0.2 addresses. Once configured, connectivity between the 192.168.1.0/24 and 192.168.2.0/24 networks can be tested using ping and traceroute.
Linux Server Start
This document provides an overview of common commands, configurations, and tools used for deploying projects on Linux servers including CentOS. It covers setting up networking, remote access, domains, Java, MySQL, web containers like Tomcat and GlassFish, web servers Apache and Nginx, time synchronization with NTP, automatic startup of services, and firewall management.
Nessus scan report using microsoft patchs scan policy - Tareq Hanaysha
A Nessus vulnerability scan was performed on a host named "tareq-laptop" between 15:19 and 15:20 on November 17, 2008. The scan found 19 open ports but no vulnerabilities rated as high, medium, or low risk. Details provided include the operating system, NetBIOS name, and DNS name which were all listed as unknown. Each of the 19 open ports found are also listed.
What's hot (14)
Как HeadHunter удалось безопасно нарушить RFC 793 (TCP) и обойти сетевые лову...
Как HeadHunter удалось безопасно нарушить RFC 793 (TCP) и обойти сетевые лову...
Как HeadHunter удалось безопасно нарушить RFC 793 (TCP) и обойти сетевые лову...
Как HeadHunter удалось безопасно нарушить RFC 793 (TCP) и обойти сетевые лову...
TechTalkThursday 29.06.2017: Wie verhält sich DDoS in der Realität?
TechTalkThursday 29.06.2017: Wie verhält sich DDoS in der Realität?
PENYELESAIAN SOAL UKK/UPK TAHUN 2018 Paket 3 oleh Walid Umar
PENYELESAIAN SOAL UKK/UPK TAHUN 2018 Paket 3 oleh Walid Umar
Instalasi Network Monitoring System (Nagios) Ubuntu 12.04
Instalasi Network Monitoring System (Nagios) Ubuntu 12.04
Nessus scan report using microsoft patchs scan policy - Tareq Hanaysha
Nessus scan report using microsoft patchs scan policy - Tareq Hanaysha
Similar to Uable to do ssh from the RedHat Linux machine to Netapp filer 7 mode storage system throwing the error message as "Unable to negotiate with 10.150.10.10 port 22: no matching cipher found. Their offer: 3des-cbc"
Konfigurasi Server Gateway dengan fitur PROXY, WEBSERVER dan DHCP
This document provides instructions for completing a competency test on networking skills. It details how to:
1) Plan a network topology with a server, gateway, and client devices.
2) Perform subnetting calculations to divide IP addresses into public and private networks.
3) Assemble and install a Debian server, configure networking and services like DHCP, Apache, and Squid proxy server.
4) Configure the router and firewall rules for network address translation and proxy access.
Linux Networking Commands
This document provides an overview of common Linux networking commands such as ifconfig, route, traceroute, nslookup, arp, dig, and netstat that are used to configure network interfaces, display routing tables, trace network routes, lookup domain names, manage address resolution, query DNS servers, and view network statistics. It also discusses how to use ifconfig to assign IP addresses to interfaces, route to view routing tables, arp to manage the address resolution cache, and dig for more powerful DNS lookups than nslookup.
Linux router
The document describes how to configure a Linux machine as a router to connect two subnets. It provides instructions to enable IP forwarding and configure the network interfaces using temporary and permanent methods.
The summary is:
- Enable IP forwarding and configure the network interfaces of two Ethernet cards using ifconfig to set up routing temporarily
- Use netconf to configure the interfaces and routing permanently by editing settings, accepting changes, and rebooting to confirm the configuration persists
- Install traffic generator programs on end stations to test routing of UDP and TCP packets between subnets going through the router
Network commands
The document discusses various Linux network configuration and troubleshooting commands, including ifconfig for configuring network interfaces and viewing network settings, ping for testing network connectivity, traceroute for tracing the network route to a destination, and commands like netstat, dig, nslookup, route, host, arp, ethtool, iwconfig, and hostname for additional network tasks and information retrieval. It provides examples and brief explanations of how to use each command.
05 module managing your network enviornment
Upon reading the document, the key steps in a router's start-up process can be summarized as follows:
1. When power is applied, the router performs a power-on self-test and loads the bootstrap code from ROM to initialize hardware and find the IOS image.
2. The IOS image is then loaded from flash memory or another source such as TFTP into RAM where it is decompressed and executed.
3. The startup configuration is loaded, typically from NVRAM. If no configuration is present, the router enters setup mode to configure initial settings.
Hack The Box Nest 10.10.10.178
I have some fun with HackTheBox machine with the Nest (the easy one) and do a note with Write-ups style.
--
Mod
Linux Network commands
This document provides an overview of various networking tools in Linux, including commands for network configuration (ifconfig, route), connectivity testing (ping, traceroute), name resolution (host, nslookup), port and protocol inspection (netstat, tcpdump), and secure remote access (SSH, PuTTY). It also covers tools for firewall management (ufw), network mapping (Nmap), raw socket programming (netcat), link status (ethtool), and more. Examples are given for common tasks like viewing routing tables, capturing packets, remotely controlling systems, and accessing services over Telnet versus SSH. A references section at the end provides additional learning resources.
[오픈소스컨설팅] Linux Network Troubleshooting
The document discusses Linux networking commands and tools. It provides examples of using ip commands to view and configure network interfaces, routes, neighbors, and rules. It also shows tcpdump for packet capture and nmap for port scanning. Firewalls are configured using iptables to allow traffic from a specific source to a web server port.
Free radius billing server with practical vpn exmaple
This document provides instructions for setting up a total site-to-site Linux-based OpenVPN solution with dynamic DNS (DDNS) in 3 pages. It includes steps to install and configure a DDNS client, FreeRADIUS server, MySQL database, OpenVPN server, firewall rules, and a web interface for managing the FreeRADIUS server. The full document contains technical details for installing packages, editing configuration files, testing the setup, and securing the system.
Mini CTF workshop dump
This document provides instructions for hacking into various targets on a network to retrieve flags. It includes steps like port scanning with Nmap, cracking passwords, exploiting vulnerabilities like SQL injection and file inclusion, and using tools like Hydra, Burp Suite, and Metasploit to retrieve hashes, escalate privileges, and access remote systems. The flags are stored on the target systems in files or application interfaces.
TCP/IP Exercises
System Administration and IP Services TCP/IP Networking Exercises
Practice: ping, netstat, tcpdump, traceroute, arp, route.
Ssh and sshfp dns records v04
Using DNSSEC and SSHFP records to ensure you're ssh (and scp) session is connected to the server you expect.
Saad baig practical file
This document contains instructions and configuration steps for configuring Cisco routers and switches. It discusses configuring global settings like hostname and MOTD banners on routers. It also provides steps for configuring router passwords, interfaces with IP addresses, and saving configurations. The document contains tasks for configuring a switch interface description and saving the RAM configuration to NVRAM.
3 scanning-ger paoctes-pub
The document discusses the nmap scanning tool and provides examples of using its basic scanning options. Nmap can scan for open ports on TCP, UDP, and other protocols. It can detect operating systems, banner grab services to identify software versions, and has options for port scanning, ping scanning entire networks, and more. Scripting options allow tasks like brute force attempts, information gathering, and vulnerability scanning.
Unidade3 roteiro proxy
The document describes how to configure a proxy server using Squid Cache on a Linux server. It provides instructions for installing Squid Cache via yum, downloading, compiling and installing the Squid tarball. It also includes an example Squid configuration file with ACL rules to allow access from local networks and deny access to blocked sites and unsafe ports.
Sc manual
The document provides instructions for a Packet Tracer practical activity to configure security features like OSPF MD5 authentication, NTP, syslog, and SSH on Cisco routers. Students will configure OSPF MD5 authentication between the routers, configure the routers to synchronize time with an NTP server, configure the routers to log messages to a syslog server, and configure one of the routers to support SSH management. The objectives are to learn how to securely configure these routing, time synchronization, logging and remote access protocols between network devices.
Reverse engineering Swisscom's Centro Grande Modem
The document discusses reverse engineering the firmware of Swisscom's Centro Grande modems. It identifies several vulnerabilities found, including a command overflow issue that allows complete control of the device by exceeding the input buffer, and multiple buffer overflow issues that can be exploited to execute code remotely by crafting specially formatted XML files. Details are provided on the exploitation techniques and timeline of coordination with Swisscom to address the vulnerabilities.
managing your network environment
The document discusses Cisco Discovery Protocol (CDP) and how it can be used to gather information about neighboring and remote network devices. CDP discovers information like device identifiers, address lists, port identifiers, and capabilities without needing to know the data link layer protocol. The summary also describes how to use commands like show cdp neighbor, show cdp entry, ping, and telnet to view CDP information and connect to remote devices.
1. Task In this assignment you are asked to provide named.pdf
1. Task In this assignment you are asked to provide named ACLs for Cisco Packet Filter
Firewalls. Each student must undertake their own assignment - any duplicate solutions will
receive 0 marks. Please submit any questions/queries via email to Consider the following
network outline: - Note: There is no need to build this network !!! - Note: Not all PCs/Servers are
displayed! This network has the following components: - The Internet: any machine/network
range not mentioned elsewhere. - Partner (class B network 136.201.0.0/16): a business partner
with privileged access rights. - Evil Group (class C network 6.6.60.0/C): known to have
malicious intent. - Your own corporate network (class B network 147.17.0.0/16), which has the
subnets 147.17.1.0/24 Screened Subnet, 147.17.2.0/24 Workstation Network, 147.17.3/24 Server
Network, and 147.17.4.0/24 Admin Network.
The Border Router in the Corporate Network has the following interfaces: - FastEthernet 0/0:
Connected to the ISP (Internet), IP address 10.10.10.10 - FastEthernet 1/0: Connected to the
Screened Subnet, IP address 147.17.1.254 - FastEthernet 2/0: Connected to the Workstation
Network, IP address 147.17.2.254 The Internal Router in the Corporate Network has the
following interfaces: - FastEthernet 0/0: Connected to the Workstation Network, IP address
147.17.2.254 - FastEthernet 1/0: Connected to the Server Network, IP address 147.17.3.254 -
FastEthernet 2/0: Connected to the Admin Network, IP address 147.17.4.254 The Screened
Subnet contains the following servers: - DNS Server 147.17.1.50 - Mail Server 147.17.1.60 -
Web Server 147.17.1.70 The Workstation Network contains the following machines: 2/6 -
Internal PCs and Workstations 147.17.2.1-254 (even though 147.17.2.254/_ .ne interfaces of the
routers, treat them as if they were PCS) The Internal Server Network contains the following
servers: - Internal NTP Server 147.17.3.10 - MySQL Database Server 147.17.3.20 The Admin
Network contains the following machines: - Admin PCs 147.17.4.1-127 - Syslog Server
147.17.4.128 Your task is to configure named ACLs in the two routers to implement the security
policy outlined below (only IPv4 needs to be considered). Please note that some networking
aspects that are usually required for the network to work might be missing - you can ignore
these. In this section, IP addresses are combined with ports in format ipaddress:port, where port
indicates TCP (T) or UDP (U) as well as port number. Ranges are indicated as follows: - Port in
range x to y (both inclusive): Txy - Any port greater than x:T>x - Any port greater or equal to
x:T>=x - Any port less than x:T1023 to 147.17.4.128:T514) and can contact the NTP server
(147.17.x.x:U>1023 to 147.17.3.10:U123). - Business partner machines can connect to the
Syslog Server via SSH (136.201.x.x:T>1023 to 147.17.4.128:T22), can send secure log message
to the Syslog Server (136.201.x.x:T>1023 to 147.17.4.128:T514) and contact the NTP Server
(136.201.x.x:U>1023 to 147.17.3.
Home security with Raspberry Pi
1) The document discusses using a Raspberry Pi for home security with Zoneminder or a simpler alternative. It provides steps to set up Zoneminder on a Raspberry Pi 1 with Raspbian to use IP cameras for video monitoring and email notifications.
2) An alternative project is described that uses PIR sensors, an RFID reader, LED status lights, a switch, and a Python script running on the Raspberry Pi to detect intrusions and send email alerts without relying on Zoneminder.
3) Instructions and code are provided to read sensors, control lights, arm/disarm with RFID, capture camera images on detection, and send alert emails with images attached using Postfix. The
Similar to Uable to do ssh from the RedHat Linux machine to Netapp filer 7 mode storage system throwing the error message as "Unable to negotiate with 10.150.10.10 port 22: no matching cipher found. Their offer: 3des-cbc" (20)
Konfigurasi Server Gateway dengan fitur PROXY, WEBSERVER dan DHCP
Konfigurasi Server Gateway dengan fitur PROXY, WEBSERVER dan DHCP
Free radius billing server with practical vpn exmaple
Free radius billing server with practical vpn exmaple
Reverse engineering Swisscom's Centro Grande Modem
Reverse engineering Swisscom's Centro Grande Modem
1. Task In this assignment you are asked to provide named.pdf
1. Task In this assignment you are asked to provide named.pdf
More from Saroj Sahu
How to shutdown the Netapp SAN 8.3 and 9.2 version
Here it has been described the step by step process "how to shutdown or power down of the Netapp Cluster mode system version 8.3 onwards
How to Shutdown Netapp Cluster Mode Storage System with Multi-Node Cluster (6...
Here we have explain step by step how to shutdown the Netapp storage System with Multi-Node Cluster (6 nodes cluster with ontap version 9.1P14 with model FAS8200, AFF8040 & AFF8020)
Autosupport email sending failed issue netapp cluster mode-
Sometimes autosupport message is not sending to the "autosupport.to" list, means we are not getting as an mail.
How to assign the disks in Netapp storage cluster mode 8.X
Here we have described how to assign the disks which are in unassigned state in netapp cluster mode storage system and explained in which scenario we have to assign the disks.
How to assign unowned disk in the netapp cluster 8.3
Here it has been described how to assign the disk which is unowned to the node in the netapp cluster mode 8.3 and how to enable the disk assign option shelf level and stack level
Use of administrative privilege levels in netapp cluster 8.x
Here it has been described how to user the administrative privileges in command mode in Netapp cluster mode 8.x
Different type of shells In Netapp Cluster mode 8.X and how to access them t...
Here it has been described how to use different type of shells in the Netapp cluster mode 8.x storage
How to access the Netapp cluster mode 8.2 through CLI (command mode)
This document provides 3 methods for accessing a NetApp cluster mode storage system through the command line interface (CLI).
Method 1 involves connecting a laptop directly to the storage system's serial port using PuTTY software and logging in with username "admin". Method 2 allows using telnet or RSH by first cloning the firewall policy and enabling those services, but they are insecure. Method 3, which is recommended, uses SSH to securely access the storage system by hostname or IP and log in as "admin". The document provides instructions for downloading PuTTY and checking which CLI services are enabled or disabled.
How to shut down Netapp san 9.2 cluster mode version1
The document provides step-by-step instructions for shutting down and powering up a NetApp cluster mode system. It describes the process of:
1. Shutting down connected host machines, switches, and SAN components like controllers and disk shelves.
2. Powering up disk shelves first, then controllers, switches, and host machines after 5-10 minutes.
3. Entering commands like disabling the cluster, halting nodes, and enabling the cluster during shutdown and startup.
Unable to access the net app cluster mode 9.2 san through gui after power mai...
Unable to access the NetApp storage system 9.2 cluster mode due to cluster management LIF down and http service was disable. Here we have mentioned the real time issue which we have faced and solution has been given step by stem by using the command mode. Hope it can be useful for NetApp Administrators
Volume migration from one aggregate to other without impacting the applicatio...
How to migrate a volume from one aggregate to another in the cluster mode Netapp storage system with version 9.2 without any impact to the production
How to work seamlessly in your vm without pressing host key again and again
How to work seamlessly in your oracle VM which is installed with Cent OS or RedHat Linux? You can copy and past from your local machine to the VM without any difficulties. (HOST KEY is not required) (Guest editions CD image installation in Oracle VM (Cent OS, RedHat Linux
Deleting a vserver in Netapp cluster mode
How to delete a vserver step by step in command mode in Netapp cluster mode version 9.2 system. Lot of hurdles can be avoided if you follow this document.Thank you!
How to enable efficiency (deduplication and compression in netapp cluster mod...
This step by step implementation of deduplication and compression will make you easy to implement in your environment on the volume of Netapp storage. we will get lot of space savings which will benefit for customer and business can grow beyond our limitation.
How to see the event and audit logs through ( gui and cli) in cluster ontap n...
With the help of this document, we can check the logs in NetApp storage. It will very helpful for troubleshooting of the issues. we can easily take the decision to act on the current issue by analysing the logs.
How to see the log files through ( gui and cli) in cluster ontap netapp stora...
How to see the logs in cluster data on tap storage system through the graphical user interface and the command line interface.
Snapshot technology Netapp storage
NetApp snapshot technology works by preserving the inode map at the time a snapshot is created and continuing to change the inode map on the active file system, while keeping the older version for the snapshot. Snapshots can be created quickly in just a few seconds without impacting performance and up to 255 snapshots can be created per volume, providing point-in-time copies of data.
SAN High availability (Netapp Storage)
High availability ensures that network services and data are accessible at all times by configuring storage systems in high availability pairs. When a network interface fails, negotiated failover can trigger an automatic failover of the storage system to prevent loss of connectivity. Enabling negotiated failover and selecting which network interfaces to include allows the storage system to fail over to the other node. The benefits of high availability include uninterrupted data access, and the ability to perform nondisruptive upgrades to storage system components like motherboards, adapters, disks and interfaces.
3PAR: HOW TO CHANGE THE IP ADDRESS OF HP 3PAR SAN
The document provides steps to change the IP address of a HP 3PAR SAN. It outlines logging into the SAN through Putty using default credentials. It then details using the 'setnet' command to change the IP address, netmask, and gateway. The 'shownet' command confirms the new network settings. Login to the SP console allows changing additional settings like the hostname through interactive menus.
Aggregate standard for Netapp storage 7 mode
1. Storage teams create aggregates using naming conventions like aggr0, aggr1 to provision storage. They decide the configuration including the RAID type, number of disks, and disk size.
2. When creating an aggregate, factors like recovery speed, data assurance, and storage space must be considered. Larger RAID groups improve performance but increase risk of data loss if multiple disks fail, while smaller groups reduce this risk but decrease performance.
3. Guidelines for RAID group sizing depend on disk type, with ATA/SATA generally having smaller groups than FC/SAS. The default sizes balance speed, protection, and space utilization, though the maximum sizes allow flexibility based on needs.
More from Saroj Sahu (20)
How to shutdown the Netapp SAN 8.3 and 9.2 version
How to shutdown the Netapp SAN 8.3 and 9.2 version
How to Shutdown Netapp Cluster Mode Storage System with Multi-Node Cluster (6...
How to Shutdown Netapp Cluster Mode Storage System with Multi-Node Cluster (6...
Autosupport email sending failed issue netapp cluster mode-
Autosupport email sending failed issue netapp cluster mode-
How to assign the disks in Netapp storage cluster mode 8.X
How to assign the disks in Netapp storage cluster mode 8.X
How to assign unowned disk in the netapp cluster 8.3
How to assign unowned disk in the netapp cluster 8.3
Use of administrative privilege levels in netapp cluster 8.x
Use of administrative privilege levels in netapp cluster 8.x
Different type of shells In Netapp Cluster mode 8.X and how to access them t...
Different type of shells In Netapp Cluster mode 8.X and how to access them t...
How to access the Netapp cluster mode 8.2 through CLI (command mode)
How to access the Netapp cluster mode 8.2 through CLI (command mode)
How to shut down Netapp san 9.2 cluster mode version1
How to shut down Netapp san 9.2 cluster mode version1
Unable to access the net app cluster mode 9.2 san through gui after power mai...
Unable to access the net app cluster mode 9.2 san through gui after power mai...
Volume migration from one aggregate to other without impacting the applicatio...
Volume migration from one aggregate to other without impacting the applicatio...
How to work seamlessly in your vm without pressing host key again and again
How to work seamlessly in your vm without pressing host key again and again
How to enable efficiency (deduplication and compression in netapp cluster mod...
How to enable efficiency (deduplication and compression in netapp cluster mod...
How to see the event and audit logs through ( gui and cli) in cluster ontap n...
How to see the event and audit logs through ( gui and cli) in cluster ontap n...
How to see the log files through ( gui and cli) in cluster ontap netapp stora...
How to see the log files through ( gui and cli) in cluster ontap netapp stora...
Recently uploaded
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Recently uploaded (20)
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Uable to do ssh from the RedHat Linux machine to Netapp filer 7 mode storage system throwing the error message as "Unable to negotiate with 10.150.10.10 port 22: no matching cipher found. Their offer: 3des-cbc"
- 1. Uable to ssh NetAppfiler7 mode storage system from the RedHat Linuxmachine throwingthe error message as below,but it is pingable. [root@smbserver~]#ssh root@10.160.10.10 Unable to negotiate with 10.160.10.10 port 22: no matchingcipherfound.Theiroffer:3des-cbc [root@smbserver~]#ssh 10.160.10.10 Unable to negotiate with10.190.196.62 port 22: no matchingcipherfound.Theiroffer:3des-cbc [root@smbserver~]#ping10.150.10.10 PING10.160.10.10 (10.160.10.10) 56(84) bytesof data. 64 bytesfrom10.160.10.10: icmp_seq=1 ttl=128 time=155 ms Solutions-: First of all,make an entrythe hostname ofthe RedHat Linux machine IP and host informationas below Netapp1>wrfile /etc/hosts #Auto-generatedbysetupWedJun20 16:28:23 GMT 2018 127.0.0.1 localhostlocalhost-stack 127.0.10.1 localhost-10localhost-bsd 127.0.20.1 localhost-20localhost-sk 10.160.10.11 Netapp1-aNetapp1-a-e0M # 0.0.0.0 Netapp1-a-e0P 10.160.10.10 Netapp1-a-e0a 192.168.230.131 smbserver.abc.comsmbserv (IPand host name of the RedHat Linux Machine) Thenpress Ctrl+C (tosave the contentof the rdfile /etc/hostsinthe netappControllerof boththe nodes) Afterthat goto the RedHatLinux Machine and enable anoptioninthe /etc/ssh/ssh_config file [root@smbserver~]#vi /etc/ssh/ssh_config
- 2. We needtouncommentthe blowline whichare bydefaultina# followedbythe below line. Ciphersaes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc Thendo sshfrom the RedHatLinux machine toNetappFilerbyusingthe hostname orIP addressaswe have mentionedbothinthe /etc/hostsfile itcanbe accessible byIPandHostname. [root@smbserverssh]#sshroo@Netapp1-a The authenticityof host'munc1netapp1-a(10.190.196.11)' can't be established. RSA keyfingerprintisSHA256:i5efLTF25Yyj8iWYmT8gDjwy27zaFoX3IhHtJGFeNH0. RSA keyfingerprintisMD5:da:4c:59:0b:e5:9c:75:bb:07:86:24:9d:1a:e0:5b:b1. Are you sure youwant to continue connecting(yes/no)?yes Warning:Permanentlyadded'munc1netapp1-a, 10.160.10.10 (RSA) to the listof knownhosts. root@netapp1-a'spassword: Please provide the passwordof the NetAppstorage system andaccessit. Thank you!!!!Saroj