This document provides information about timber, including its definition, structure, classifications, properties, defects, seasoning, preservation, fireproofing, and common types. Timber is defined as wood that retains its natural structure and composition and is suitable for engineering works. It discusses the structures of softwoods and hardwoods. Classifications include based on growth, durability, seasoning characteristics, and grading. General properties, mechanical properties, and qualities of good timber are outlined. Various natural and manufactured defects that can occur in timber are described. The methods and advantages of seasoning timber are explained. The document also covers the types of preservatives used to treat timber, the preparation and methods of treatment, and characteristics of good preservatives
All you need to know about timber in just a single ppt with interesting slides. Hope it hlps! This ppt was created as the result of a teamwork with my classmates
All you need to know about timber in just a single ppt with interesting slides. Hope it hlps! This ppt was created as the result of a teamwork with my classmates
The process of removal of moisture content from wood, so as to make it useful for construction and other uses, is called drying of wood or seasoning of wood.
types of seasoning in wood
artificial seasoning of wood
how to season firewood quickly
chemical seasoning of timber
seasoning of timber
wood seasoning process
types of seasoning of timber
different types of seasoning wood
water seasoning of timber
seasoning of timber pdf
natural seasoning timber
chemical seasoning of timber
reasons for seasoning timber
kiln seasoning of timber
seasoning defects in timber
air seasoning wood
types of seasoning in wood
seasoning of timber pdf
natural seasoning timber
chemical seasoning of timber
reasons for seasoning timber
kiln seasoning of timber
seasoning defects in timber
natural seasoning timber
water seasoning of timber
seasoning of timber pdf
chemical seasoning of timber
reasons for seasoning timber
disadvantages of artificial seasoning
seasoning defects in timber
kiln seasoning of timber
water seasoning of timber
seasoning of timber pdf
natural seasoning timber
methods of seasoning timber
reasons for seasoning timber
kiln seasoning of timber
seasoning defects in timber
louisiana shrimp boil seasoning
seafood boil seasoning ingredients
seafood boil seasoning mix recipe
homemade seafood boil seasoning recipe
seafood boil seasoning
shrimp boil seasoning mix recipe
louisiana crawfish boil seasoning recipe
homemade crab boil seasoning
types of seasoning in wood
air seasoning wood
wood seasoning process
seasoning wood for burning
seasoning ash wood
artificial seasoning of wood
seasoning wood for woodworking
different types of seasoning wood
slide share
slideshare ppt
Timbers: Varieties of Indian timber, Characteristics and suitability
for different uses, Defects in timber, Diseases and decay in timber, Preservation and
Seasoning, Veneers, Fiber boards, Block boards
TIMBER -
AN INTEGRAL PART OF OUR DAY TO DAY LIVES
TIMBER ITS DEFECTS, SEASONING AND USAGE IS DISCUSSED IN HERE WITH APPROPRIATE PICTURES MAKING IT QUITE SELF UNDERSTANDABLE
WOOD - As a Material
types - hard wood, soft wood, description, manufactured boards, joining methods, adhesives used, types of adhesives, types of hardware, screws used, types of nails, joints, all the joinery sketches, knock down fittings and everything about wood.
Timber as a building material consists of uses, pros and cons.
Classification of trees as exogeneous and endogeneous. Structure of tree. Processing of timber 4 stages - felling of trees, seasonong of timber, conversion of timber and preservation of timber. Characteristics of good timber and defects of timber. Industrial timbers
The process of removal of moisture content from wood, so as to make it useful for construction and other uses, is called drying of wood or seasoning of wood.
types of seasoning in wood
artificial seasoning of wood
how to season firewood quickly
chemical seasoning of timber
seasoning of timber
wood seasoning process
types of seasoning of timber
different types of seasoning wood
water seasoning of timber
seasoning of timber pdf
natural seasoning timber
chemical seasoning of timber
reasons for seasoning timber
kiln seasoning of timber
seasoning defects in timber
air seasoning wood
types of seasoning in wood
seasoning of timber pdf
natural seasoning timber
chemical seasoning of timber
reasons for seasoning timber
kiln seasoning of timber
seasoning defects in timber
natural seasoning timber
water seasoning of timber
seasoning of timber pdf
chemical seasoning of timber
reasons for seasoning timber
disadvantages of artificial seasoning
seasoning defects in timber
kiln seasoning of timber
water seasoning of timber
seasoning of timber pdf
natural seasoning timber
methods of seasoning timber
reasons for seasoning timber
kiln seasoning of timber
seasoning defects in timber
louisiana shrimp boil seasoning
seafood boil seasoning ingredients
seafood boil seasoning mix recipe
homemade seafood boil seasoning recipe
seafood boil seasoning
shrimp boil seasoning mix recipe
louisiana crawfish boil seasoning recipe
homemade crab boil seasoning
types of seasoning in wood
air seasoning wood
wood seasoning process
seasoning wood for burning
seasoning ash wood
artificial seasoning of wood
seasoning wood for woodworking
different types of seasoning wood
slide share
slideshare ppt
Timbers: Varieties of Indian timber, Characteristics and suitability
for different uses, Defects in timber, Diseases and decay in timber, Preservation and
Seasoning, Veneers, Fiber boards, Block boards
TIMBER -
AN INTEGRAL PART OF OUR DAY TO DAY LIVES
TIMBER ITS DEFECTS, SEASONING AND USAGE IS DISCUSSED IN HERE WITH APPROPRIATE PICTURES MAKING IT QUITE SELF UNDERSTANDABLE
WOOD - As a Material
types - hard wood, soft wood, description, manufactured boards, joining methods, adhesives used, types of adhesives, types of hardware, screws used, types of nails, joints, all the joinery sketches, knock down fittings and everything about wood.
Timber as a building material consists of uses, pros and cons.
Classification of trees as exogeneous and endogeneous. Structure of tree. Processing of timber 4 stages - felling of trees, seasonong of timber, conversion of timber and preservation of timber. Characteristics of good timber and defects of timber. Industrial timbers
wood defects for civil engineering studentselviraandadi14
No matter what species of timber you use, you will undoubtedly come across some pieces that contain defects.
Defects may be naturally occurring or can be man-made. Natural defects can be due to many reasons such as environmental factors, growth patterns, soil composition, etc. Man-made defects can occur at many points ... from the felling of the tree, transport, storage, sawing, drying, etc.
The terms “hardwood” and “softwood” are often misleading because they have no direct relation to the actual physical hardness or softness of the wood, so that a hardwood may actually be softer than a softwood.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Gen AI Study Jams _ For the GDSC Leads in India.pdf
Timber ppt final
1. CIVIL ENGINEERING CONSTRUCTION
MATERIALS(1103)
TIMBER
1
NAME REG. NUMBER PHONE NUMBER
IMALINAGT GABRIEL 2018/KCE/0777/F 0778889793
KIRABO NASSER 2018/KCE/0759/F 0703299831
WANCHA VICENT 2018/KCE/OO89/G/F 0789112169
KATUSIIME BRIDGET 2018/KCE/0096/G/F 0779259105
2. DEFINITION
Timber is wood which retains its natural physical
structure and chemical composition and its suitable for
various engineering works.
Structure of timber
2
3. Classification of Timber
• Mode of Growth
a.exogens (exogenous) – these trees grow outward.
coniferous trees
deciduous trees
b.endogens (endogenous) – these trees grow inwards.
• modulus of elasticity
• durability
high durability
moderate durability
low durability
3
4. Classifications of Timber
• seasoning characteristics
• high refractory (class a)(likely to
be damaged severely)
• moderately refractory (class
b)(have a tendency to split or
crack during seasoning)
• non refractory (class c)(rapidly
seasoned without any trouble)
• grading
4
5. General properties of timber
o Color – a darker color in wood indicates greater durability.
o Odor – it is present only on freshly cut trees.
o Hardness – is the ability of wood to withstand indentations
caused by harder bodies.
o Density – densest woods are generally the strongest.
o Texture - In hardwoods, the texture depends upon the size and
distribution vessels and rays. In softwoods, it is determined by
the size and distribution of tracheid.
5
6. General properties cont.…
Workability- the relative case in which wood
is shaped cut and fastened together than the
others.
Warping- is the general term used to describe
any variation from a true surface.
Moisture content- is a percentage of the
mass of water over the mass of wood fiber in a
piece of timber.
6
7. 1. Tracheid - These are hollow, needle-shaped units closely
packed together so that a cross-section through them resembles
a honeycomb.
2. Storage Tissues (Rays and Wood Parenchyma Cells) - They
are too small to be seen individually and are not of much in
identification.
3. Resin Canals - these canals are not cells but are cavities in the
wood lined by the parenchyma cells.
4. Growth Rings - these are normally distinct in softwoods.
7
8. Structures of Hardwoods
1. Pores or Vessels – these are tubular elements running in a
vertical direction and serve to conduct water and mineral
nutrients.
2. Parenchyma or Soft Tissues - these are storage tissues and
consist of small, thin-walled, rectangular or brick-shaped cells.
These are vertically aligned.
3. Rays - are groups of horizontally aligned parenchyma cells
running in a radial direction and their function is horizontal
conduction and storage.
4. Intercellular cells – These are long tubular cavities seen in the
horizontal or vertical direction.
8
9. Qualities of good timber
• 1. Hardness A good quality timber should be hard enough to
resist deterioration.
• 2. Strength it should have sufficient strength to resist heavy
structural loads.
• 3. Toughness it should have enough toughness to resist shocks
due to vibrations. It should not break in bending and should
resist splitting. Timbers having narrow annual rings, are
generally the strongest.
• 4. Elasticity it should have the property of elasticity so as to
regain its original shape after removal of loads. This is a very
important property to be considered if the timber is used in
making sport goods.
• 5. Durability it should be able to resist attacks of fungi and
worms and also atmospheric effects for a longer period of time.
9
10. Qualities of good timber cont.…
• 6. Defects timber should be prepared from the heart of a sound tree and be free
from sap, dead knots, shakes and other similar defects.
• 7. Fibres and structure it should have straight and closed fibres and compact
medullary rays. It should give a clear ringing sound when struck. Dull heavy
sound is an indication of internal decay. Its annual rings should be uniform in
shape and colour. Structure of a timber
• 8. Appearance and colour freshly cut surface should give sweet smell and
present shining surface. It should have dark color, as light colored timbers are
generally weak in strength.
• 9. Shape and weight it should retain its shape during the process of
seasoning. Heavy timbers are always stronger than light weight timbers.
• 10. Workability it should be well seasoned and easily workable. Teeth of saw
should not get clogged during the process of sawing. It should provide
smoothened surface easily.
10
11. Felling and Conversion
11
• Felling and Transporting the Timber
Felling is done by a clean saw cut as near to the base as possible.
Transporting the log to saw mill is done either by road transport using
big trucks
Sawing. Is the splitting of wood into timber.
Conversion; this is the cutting of timber into marketed sizes and
shapes.
Methods of conversion
Ordinary or Flat conversion
Tangential conversion
Radial conversion
Quarter or Rift conversion
Combination conversion
12. • The quarter sawn is far more expensive because of the need
to double (or more) handle the log. There is also more
wastage. It is however more decorative and less prone to cup
or distort. Note also there are two ways of sawing the quarter.
• Through and through produces mostly tangentially sawn
timber and some quarter sawn stuff. (See diagram) tangential
timber is the most economical to produce because of the
relatively less repetitive production methods. It is used
extensively in the building industry
12
13. • Moisture Content - It s one of the most important
characteristics of timber that affects its use on the site
performance.
• Equilibrium Moisture Content (EMC) - moisture
content of wood changes in response to the
temperature and humidity of its surroundings.
• Fiber Saturation Point (FSP) – when the cell
cavities are empty but the cell walls still retain their
bound water.
13
14. Seasoning of timber
Defn: Seasoning of timber is the process by which moisture content in the
timber is reduced to required level. A well-seasoned timber has 15%
moisture content in it. The methods include;
1. Natural/Air seasoning.
Natural seasoning is the process in which timber is seasoned by
subjecting it to the natural elements such as air or water. Natural
seasoning may be water seasoning or air seasoning.
2. Artificial /Kiln seasoning.
Natural seasoning gives good results but takes more time. So, artificial
seasoning of timber is developed nowadays. By artificial seasoning, timber
is seasoned with in 4-5 days. Here also different methods of artificial
seasoning are there and they are as follows. Seasoning by Boiling,
Chemical seasoning, Kiln seasoning and electrical seasoning.
14
15. Advantages of seasoning
It ensures that no shrinkage takes place before the
timber is used
It ensures the moisture content of timber is below the
dry rot safety line 20%
Dry timber is easier to work with than wet timber
Using seasoned timber gives a more reliable and is less
likely to split or distort (dry timber is stronger and
stiffer than wet timber)
Wet timber will not readily accept glue, paint or polish.
etc.
15
16. Disadvantages of seasoning
• Some seasonings methods contain a chemical called TCP and
this may be detrimental to health if over exposed.
• Seasoning is not always uniform in all the sections of timber.
• Some seasoning methods are very slow process like natural
seasoning.
• Some seasoning methods are expensive like electrical methods.
16
17. Mechanical Properties
17
• Tensile Strength
Timber is stronger in tension along the grain but it’s quite
difficult to determine this because of the difficulties in conducting test.
• Compressive Strength
The strength along the grain is important for columns, props, and post.
• Shear Strength
Shear strength is important in the case of the beam and slabs.
• Bending Strength or Flexural Strength
This refers as the strength of the timber as a beam.
18. 18
• Brittleness
is use to describe the property of suffering little deformations
before breaking.
• Hardness
is important in case of timber for paving blocks flooring bearings
and other similar purposes.
• Stiffness
This property is important to determine the deflection of a timber
under a load
19. Defects in Timber
19
Defects caused in timber may be basically classified
into two categories:
Internal Defects
These are due to factors affecting the growing tissue
or the tree.
External Defects
These take place due to external agents or
subsequent treatment of timber.
21. knots
21
The central part or stem of a tree is majorly used in
the conversion of timber. Branches from the stem
are removed and whole rounded stem is taken. But
the base of branches forms a mark on the stem
which results dark colored stains on the surface
after conversion.
Examples include;
Live knots, dead knots, decay knots,
Loose knots.
22. Defects in Timber due to natural forces cont’d
22
• Shakes- or cracks are caused by the rupture
of tissues resulting in partial or complete
separation of the fibers along the grain.
» Star Shakes
» Heart Shakes
» Cups Shakes
» Ring Shakes
» Radial Shakes
23. Classification of Defects in Timber
23
Rind Galls- these are typical curved swelling formed upon the
trunk of the tree by successive layer of the sapwood.
Upsets- are clipping or buckling of fibers caused by crushing of
fibers when the trunk is felled violently over a rocky surface.
Twisted or Spiral Grain- fibers or wandering hearts are caused by the
prevalent wind turning or twisting the tree at its young age constantly in
one direction.
Wind Cracks- are shakes on the outside of a log due to the shrinkage of
the exterior surface caused by the atmospheric influences.
24. Defects Due to Seasoning
24
• Bow- a curvature of the timber in the direction of its length.
• Cup- a curvature in the transverse direction of the timber.
• Twist- a spiral distortion along the length of the timber.
• Spring- a curvature of the timber in its own plane.
• Case Hardening- it is due to the unequal drying of the exterior surfaces
under compression and the interior surfaces under tension due to rapid
drying.
• Split- separation of the fibers along the grain and
extends from one end of the plank to the other.
• Honey Combing- separation of the fibers in the
interior due to drying stresses.
• Collapse - the cells of timber are flattened due to excessive shrinkage
25. Defects Due to Manufacturing or Use
• Chipped or Torn Grain- a defect caused by the breaking away of timber
below the surface of the dressing by the action of the planning tool.
• Chip Mark- indentation on the finished surface of the timber caused by
the chips or other small pieces of the timber being carried around on the
planning knife edges.
• Wane- the original round surface of a tree which remains on
finished plank.
• Boxed Heart- the pith at the center fully enclosed within one
piece in the process of conversion.
25
26. Decay of Timber/Defect associated with fungi
• Decay or Rot - is usually caused by the presence of sap or by
the alternate dry and wet condition of the timber.
Forms of Decay
Wet rot
Dry rot
Due to fungal attack
Due to insects
Wet Rot - This is a decomposition of sap and fibers of the living
tree set up by the access of water through wounds in the barks.
Dry Rot - This is a decomposition of converted timber induced
by the commonest and most destructive dry rot fungi or
weeping fungus.
26
28. Decay of Timber
Due to fungal Attack
A fungus starts its life as a tiny seed or spore, one of
millions produced at the fruiting stage.
o Fungi
are system plant organisms which live on and attack
timber causes it to rot or decay.
o Fungi can only exist in following condition:
• Air for their respiration
• Moisture
• Suitable Temperature
• Food Supplies
28
29. Defects of Timber by insects
a) Beetles:
b) Small insects form holes of size about 2mm diameter and attack sap
wood of all species of hard woods. Tunnels are formed in all
directions in sapwood by the larvae of these beetles and converted
into fine flour like powder. They do not disturb outer cover and
looks sound.
c) Marine borers:
d) These make holes or bore tunnels in wood for taking shelter. The
wood attacked by marine borers loses color and strength
e) Termites:
f) White ants are very fast in eating away the wood from the core of
the cross section. They make tunnels inside in different directions
and usually do not disturb the outer shell or cover
29
30. Seasoning of Timber
• REASONS OF SEASONING
-To reduce movement of timber, to reduce the tendency to
split.
-To make it immune from attack by insects.
-To increase strength, durability, workability and resilience.
-To make the timber receptive to finish like preservatives,
paints, and varnish.
-To reduce weight and minimize cost of transportation.
-To make the timber burn readily, if used as a fuel.
30
31. Preservation of Timber
• Preservatives Types:
• Oil Type
coal tar creosote with or without admixture of petroleum, coal tar,
fuel oil or other suitable oils having high boiling range.
• Organic solvent type
consist of toxic chemical compounds
dissolved in a non- aqueous solvent like volatile oils, spirits,
naphtha etc.
• Water-soluble(leachable)
these preservatives are inorganic salts soluble in water.
• Water-soluble (Fixed)
These consists of the various salt described above with the
addition of fixative salt, usually sodium or potassium
dichromate.
31
32. Preservation of Timber
• Characteristics of a Good Preservative
o It should be strongly toxic to insects and fungi.
o It should penetrate readily into the timber.
o It should not be soluble in water nor should it change in
composition under
o ordinary climatic condition.
o It should cover a large surface area with a comparatively small
quantity of preservative.
o It should have no destructive influence on the strength of the
timber.
o It should be harmless to human beings.
o It should not render the timber treated with it more inflammable.
oIt should not be non-corrosive to metals.
oIt should be pleasant in color and give an attractive appearance to
the wood work.
oIt should be highly resistant to water and dampness.
oIt should be economical and available readily
32
33. Preparation of Timber for
Treatment
• Methods of Treatment
• Surface Application
• Soaking
• Hot and Cold Process
• Boucherie Process
• Diffusion Process
• Pressure or Pneumatic
Process
•Full Cell or Bethel
Process
•Empty Cell Process
•Choice of Treatment
33
34. Fire-proofing of Timber
• Timber about a particular thickness, cannot support self-sustained combustion
and continue to burn only when external heat is applied.
• Timber cannot be made fire proof but can only be made fire resistant.
• It is supposed that the fire-proofing chemicals act in one of the following
ways:
The melting point of the chemicals is low so that it melts and forms a
barrier to the supply of oxygen to the inside.
The chemical decomposes under heat, yielding non-inflammable gases that
dilute the inflammable gases. This retards the ignition of inflammable point.
The chemical vaporizes at sufficiently low temperature, absorbing sufficient
heat that the temperature of wood does not rise to decomposition point.
34
35. Commontimber
35
Teak - The sapwood is pale yellowish or greyish-white in color and is
distinguished from heartwood. The heartwood is golden brown and turns a dull
deeper brown on exposure.
Deodar - The sapwood is white to creamy white and is distinct from the
heartwood which is light yellowish brown turning to pinkish brown on exposure.
Chirr - The sapwood is white to creamy white and is distinct from the
heartwood which is light yellowish brown turning to pinkish brown on exposure.
Kail - The yellowish in white to greyish sapwood is white to pale-yellowish
white in color and is distinct from the heartwood which is light pinkish-red to
light red.
Sal - The sapwood is pale-yellowish or brownish white and is distinct from the
heartwood which is brown or reddish brown.
Mango - This is brown in color.
36. • Advantages of Timber
36
•It is readily available. Timber is a natural material used in many forms for building
and construction. It is readily available, and can be easily sourced from many building
material suppliers all over Australia.
•It is safe. Since it comes from a natural source, timber is non-toxic. It is safe to handle
and even as it ages, it will not cause damage to the environment. It is safe to reuse or
recycle and maximises Green Star Energy rating and carbon credits. Most timbers
these days are endorsed or sustainably harvested to return a great life cycle.
•It is easy to work. Due to its lightness, density and grain structure, and the fact we
have been using timber in buildings from the early ages we have highly developed
machinery to cut, drill and prepare timber to the required size and shape. Even
hardwood timbers are relatively easy to work with compared to other building
materials such as steel.
•It is cost effective. Timber is the cost effective alternative to many other materials, if
you consider the life cycle of timber it has less steps to process than many other
building materials, therefore less to produce.
•It is versatile and visually appealing. As timber comes in many different grades and
species this gives timber a huge reach across many different uses and appeals.
Structural and visual grade timbers are often chosen for outdoor structures.
•It is naturally anti-corrosive. Unlike steel and other highly used building materials
timber does not corrode in salt air or heavy industrial environments.
37. Availability and Uses Of Timber
• Advantages of Timber
I. Timber has better insulating properties than
any other materials.
II. Durability of timber can be very high, if
properly seasoned and preserved.
III.Timber constructions are light in weight and
can be made economical.
IV.For aesthetic and decorative appearance.
37
38. Wood Products
38
• Veneers - thin sheet of wood, 0.4 mm to 0.6
mm in thickness obtained by different knife
cutting process.
i. Rotary veneers
ii. Cutting sliced veneers
• Plywood - is made by gluing together
veneers.
Plywood grades and sizes
Boiling water proof (BWP) grade
Boiling water resistance (BWR) grade
Warm water resistance (WWR)
Cold water resistance (CWR) grade
39. Wood Products cont.…
39
• Advantages of plywood
I. It has a good strength both across as well as along
the grain.
II. Plywood has better splitting resistance due to grains
in adjacent layers running at the right angle and
nailing and screwing even closed to the edges in
safe.
III.Can easily be bending to a curvature limited by the
tensile and the compressive strength of the other
plies.
IV.The face piles made at different heartwoods show
great aesthetic variety in
V. grain pattern and color.
40. Wood Products cont.…
40
• Hardboard - manufactured from raw materials like wood waste,
veneer manufacturing, furniture making.
Sizes of hardboards
Medium hardboard
Normal hardboard
Tempered hardboard
• Particle boards - is a board manufactured from particles of wood or other lingo cellulose
materials.
• Block board – these are boards having a core made up strips of wood each not exceeding 25
mm.
• Other boardsBatten board – it is a board having a core made up of strips of wood usually 8
cm wide each laid separately or glued or otherwise joined to form a slab.
• Lamin board – it is a board having core strips, each not exceeding 7 mm in thickness.
41. Wood Products cont.…
41
• Adhesives
Synthetic Resins – it has a composition consisting substantially of
phenolic or amino plastic resins including a hardening agent,
fortifier, filler or extender.
Four types of synthetic resin
o Boiling Water Proof (BWP)
o Boiling Water Resistant (BWR)
o Warm Water Resistant (WWR)
o Cold Water Resistant (CWR)
42. Wood Products cont.…
42
Classification According to their Uses
Gap filling adhesive – suitable use in situation where the surfaces to be joined
may or may not be in continuous contact.
Close contact adhesive – where the surfaces to join can be brought
into closed contact by means of adequate pressure.
• Anima Glue – it is generally obtained from hides and bones of animals.
• Vegetable Glue – it is made from natural grains and starch-bearing roots,
potato, corn, wheat, etc. with acid like Sodium Hydroxide (NaOH).