This document introduces Thermo-S, a liquid ceramic-based thermal insulation coating produced by Hungarowatt Ltd. It has superior thermal insulation properties compared to other materials. The coating significantly reduces thermal conductivity and heat transfer. It can be used for insulating interior and exterior walls, facades, pipes, tanks and other surfaces. It is resistant to mold, bacteria, UV rays and has a lifespan of 15 years. The coating is available in different versions for various applications and surfaces both indoor and outdoor. It provides an innovative solution for thermal insulation needs.

1. Ceramic based heat reflecting coat
Product introduction

2. Liquid ceramic-based thermal insulation coating
The Thermo-S nano insulation coating significantly outperforms the
thermal conductivity and heat transfer properties of the known
conventional insulation materials and therefore its use provides a
professional and innovative solution for a wide range of situations.
Through the Hungarian developed and manufactured Thermo-S
product line Hungarowatt Ltd. would like to contribute to the
conservation of our natural resources and to the sustainable
development of humanity. Our aim is to rationalize energy
consumption and to provide the opportunity to live in a healthier
environment.

3. Thermo-S technical information
Thermo-S, UniPress, Front, FrontPress, Metal, MetalPress,
Eco – liquid ceramic-based insulation coating
Appearance, Color: White, viscous coating
Viscosity: thick, viscous
Suspension density: 500-550 kg / m3
Hardened material density: 290- 319 kg / m3
Base: Water
Colorability: Water-based colourants, up to a
maximum of 0.5%
Dilution: with water, up to a maximum of
3%
Fire protection class : A2 -s1, d0
pH: 8,5-9,5
Thermal conductivity (20 °C-on), λ: 0,003 W/mC
Heat-reflection, white: 92%

4. Water absorption after 24 hours,
on the surface: 0,03 g/cm3
Usability temperature: from -60°C to +180°C
Drying time at 20 ° C: can be repainted after 1 hour,
complete drying of
an 1 mm layer is 48 hours
Water vapor permeability: 0,2 Sd (Sd<0,5 m = water vapor
permeable)
Coverage: 1 liter / 1 m2 / 1 mm (dry film
thickness)
UVB stability: UV stable
Life span: 15 years
Adhesion: Plasters: 0,92 Mpa
Brick : 0,92 Mpa
Metals : 0,90 Mpa
Wood: 0,94 Mpa
Plastics: 0,92 Mpa
Thermo-S technical information

5. •Thermal insulation of interior walls
•Elimination of thermal bridges
•Thermal insulation of exterior walls
•Facade insulation
•Facade insulation of historic buildings
•Thermal insulation of cold storage, refrigeration containers
•Prevention of mold growth
•Industrial building insulation
•Thermal insulation of heating and cooling systems
•Tank and pipe insulation
•Insulation of the pipes of district heating.
•Insulation of metal surfaces and roofs
•Heat insulation of metal containers
Areas of use:

6. The EMI conducted Bacteria and Fungi inquiry on the Thermo-S product in
accordance with EN ISO 846:1999 standard.
The mold resistance test results show that the Thermo-S insulating coating
material may not be attacked by fungi and do not contain usable nutrients for fungi.
The Thermo-S thermal insulation coating is therefore classified as fungi resistant.
In the carried out bacterial resistance tests it was found that the Thermo-S thermal
insulation coating does not contain usable nutrients for bacteria. The Thermo-S
insulating coating is therefore classified as resistant to bacteria.

7. The coating of the walls kills
the mold and improves the
moisture control.
Reduction of allergies and
asthma by termination of the
mold
Usage of Thermo-S improves
the comfort of the home or
office by elimination of
humidity caused by cold
walls and cold bridges.

8. Thermo-S FrontPress
Applied with Airless spray
paint gun
Thermo-S Front
Applied with iron filler
Microscopic examination(400X)

9. Thermo-S FrontPress
Applied with Airless spray
paint gun
Microscopic examination(400X)
Comparative study
„ competitor's product
1” applied with Airless
spray paint gun

10. Competing products
Microscopic examination(400X)
competitor's product 2 competitor's product 3
competitor's product 1
applied with brush
competitor's product 1
spray painted

11. Thermo-S performace
Image captured with an thermal imaging camera.

12. Thermo-S performace
Thermal imaging capture presented on a graph.

13. Thermo-S advantages over the competition:
The product is made in the European Union (CE)
The product meets A2-s1, d0 fire classification (Euroclass) in case of an 1 mm
layer. This rating is unique in this thickness.
Above 1 mm layer thickness the fire classification is C2-s1,d0. The competing
products do not meet this rating.
Due to greater percentage by weight ratio of ceramic spheres the insulation
properties of the Thermo-S product family is better than the measured
values of the competing products.
Even in case of relatively small orders we’re able to produce the product
specifically for the customer’s needs.
The products labeled as Press are manufactured using high resistance
ceramic balls and are able to withstand up to 300 bar.

14. Thermo-S advantages over the competition:
Due to to the high resistance to pressure the Press product line can be applied by
airless technology.
The airless spray techology significantly reduces the work time.
The shortened spraying workflow leads to significant savings compared to
conventional coating technology.
With airless technology it is possible to coat 1000-1500 m2 per day, after an
appropriate surface preparation.
Significant inventory, flexible delivery from stock at short notice.
Our products have a specific gravity of about 50% less than major competitors.
Using the product will not cause significant increase in structural load.

15. Thermo-S advantages compared to conventional insulation technology:
Simpler application technology compared to traditional insulation.
Time saving fast application.
Require fewer hours of work per unit area, cost-effective.
Insulation of facades with complicated geometry, eg.: Monuments, silos.
Suitable for thermal insulation (retrofitting and renewal) of existing buildings.
The product itself may be colored so follow up painting not required, this results
in labor and material savings.
Can be used both indoors and outdoors.
Eco-friendly product.

16. Thermo-S product family
Thermo-S Basic – Primer for walls:
A primer specifically developed for Mahlmart products. Its usage increases the
surface adhesion and forms a durable bond between the layers. Suitable for
exterior and interior use.
Thermo-S Eco – Interior insulation:
The binding material makes it ideal for the thermal insulation of indoor walls
and interior metal surfaces. Due to its consistency it can be widely used and
it has excellent adhesion. Areas of use: Thermal insulation of interior walls,
interior insulation of thermal bridges; on concrete, gypsum, precast concrete
panels and lime, cement or gypsum based plasters. Also ideal for the
insulation of interior metal surfaces, heating and cooling systems, tanks,
pipes and fittings.
Application:
Paint brush, paint roller, iron filler, standard spray equipment

17. Thermo-S product family
Thermo-S Uni, UniPress – Indoor surfaces:
Due to its material structure and ingredients it is primarily for indoor use. We
recommend it for thermal insulation of indoor wall surfaces. Areas of use:
thermal insulation of interior walls, interior insulation of thermal bridges; on
concrete, gypsum, precast concrete panels and lime, cement or gypsum based
plasters. It can be applied to wood and wood based materials.
Thermo-S Front, FrontPress – Outdoor surfaces:
The composition of materials and the binder makes it ideal for outdoor use. We
recommend it for thermal insulation of outdoor wall surfaces. Areas of use:
thermal insulation of exterior walls, exterior insulation of thermal bridges, flat
roof insulation (bitumen sheets), facade insulation of historic buildings; on
concrete, gypsum, precast concrete panels and lime, cement or gypsum based
plasters. It can be applied to wood and wood based materials.
Application:
Paint brush, paint roller, iron filler, standard spray equipment, spray plastering
machine and airless paint equipment. Pressure: from 10 to 300 bar.

18. Thermo-S product family
Thermo-S Metal, MetalPress – Metal surfaces:
The special binder material makes it ideal for indoor and outdoor use. We
recommend it for thermal insulation of indoor and outdoor metal surfaces. Areas
of use: outdoor and indoor metal surfaces, heating and cooling systems, cold
storage, refrigerated containers, tanks, pipes and fittings, industrial buildings.
Application:
Paint brush, paint roller, iron filler, standard spray equipment, spray plastering
machine and airless paint equipment. Pressure: from 10 to 300 bar.

19. Thermo-S with iron filler or roller

20. Suggested airless sprayer MARK V from GRACO

21. Thermo-S Front – house insulation, coloring - Debrecen

22. Thermo-S Front – house insulation, coloring - Debrecen

23. Thermo-S Uni – house insulation, - Budapest

24. Thermo-S Uni – house insulation, - Budapest

25. Thermo-S Front – Historical insulation, -
Budapest Buda Castle

26. Thermo-S Front – SáriSáp

27. * At our Kiskunhalas site on the customer's request
choice of pastel color is recommended in order to keep the heat reflection
effect
Range of colors*

28. For more information, inquiries and business opportunities
kindly contact us as at gua-rep@guaglobal.com or
info@guaglobal.com Tel:+36 30 9872 375
Thank you for your kind attention!