Superior Fragmentation and Spall Mitigation Coatings by LINE-X
•
2 likes•970 views
Line-X is a company that provides superior fragmentation and spall mitigation coatings for body armor and ballistic plate manufacturers. They offer fantastic customer and technical support services including on-site equipment installation and over 20 years of experience developing customer-driven solutions. Line-X works to create customized coating solutions that increase product life cycles, customer satisfaction, and efficiency while decreasing production costs.
Report
Share
Report
Share
Download to read offline
Recommended
Linex presentationeng
This document describes Line-X, an American-made protective coating developed in the mid-1990s. It dries within 3-5 seconds, adheres well to most substrates, and has high physical and chemical resistance properties. Line-X coatings are spray-applied in thick layers and can withstand a wide range of temperatures and chemicals. They are used to protect infrastructure in oil/gas, construction, transportation, and military applications.
5min Pres 2009 Li
LINE-X specializes in spray elastomers like polyurethanes and polyureas. They lead the industry in years of field testing, customer satisfaction, product quality, and innovation. Their products include polyurethane and polyurea coatings that are VOC-free, CFC-free, and provide high tensile strength, abrasion resistance, elongation, quick setup times, and chemical resistance. LINE-X serves a variety of applications through their protective coatings including use in the military, municipalities, industrial, commercial, environmental, safety, residential, and recreational sectors.
Sikalastic 560 leaflet aus
Sikalastic-560 is a hybrid, economical and eco-friendly waterproofing solution based on Sika Co-Elastic Technology. It can be used for exposed waterproofing on roofs and for external waterproofing under tiles. The document provides instructions on substrate preparation, priming, application, drying times, and consumption rates for achieving various durations of waterproofing from 3 to 15 years. Sikalastic-560 offers benefits like high elasticity, crack bridging, color stability, faster drying, and environmental friendliness.
GRP-Glass Reinforced Plastic
Being part of the Speed House Group, our journey since inception in 1987 has been a very exciting one. Although the start was to supply our sister companies with minor GRP products to their prefab housing units, today I.C.C products have become a market leader in mass storage solutions for different types of liquids. Whether it’s sewerage, water or oil, we custom design and produce a solution for our clients. We have also established strategic alliances with companies in Korea, South Africa, France and Greece to ensure using the latest in technology & raw materials. In addition to water tanks I.C.C has expanded its offerings to several new products ranging from car shed, claddings, domes and solid surface products.
Groundworks and Civil Engineering Products
This document provides a summary of products for groundwork and civil engineering projects. It describes Insulslab SFRC, an innovative foundation system using expanded polystyrene pods and steel fibre reinforced concrete. It also lists products for voids, gas barriers, geotextiles, drainage and more. The document is a catalogue showcasing SIG Construction Accessories' range of civil engineering and groundwork products.
DELIVERING INNOVATIVE SOLUTIONS FOR THE GLOBAL BUILDING AND CONSTRUCTION INDU...
DELIVERING INNOVATIVE SOLUTIONS FOR THE GLOBAL BUILDING AND CONSTRUCTION INDU...Owens Corning Composites Solution Business
Owens Corning presentation by Geoffrey Wilson at JEC Europe 2014 on new innovative solutions for the global building and construction industry through glass non-wovensLewis Flooring Presentation
Reppel b.v. is a specialist in building materials that has been operating since 1930. It supplies products and services worldwide through its own branches in Europe and other locations. The company's products include composite steel decking, fireproofing materials, and industrial coatings. Reppel operates through two business units: Sales Distribution Products, which includes steel sheeting and accessories sold through construction dealers; and Sales Application Products, which provides technical support. Reppel aims to optimize existing markets and create new ones by adapting to customer needs and market developments. It offers high-quality, certified products along with sales and technical support services.
INTEGRATED GLASS SOLUTIONS TO REDUCE THE COST OF WIND ENERGY
INTEGRATED GLASS SOLUTIONS TO REDUCE THE COST OF WIND ENERGYOwens Corning Composites Solution Business
Presentation by Dr. Chris Skinner @JEC Europe 2014 on market trends for wind energy and Owens Corning integrated glass solutions to reduce the cost of wind energy for blade producers.Recommended
Linex presentationeng
This document describes Line-X, an American-made protective coating developed in the mid-1990s. It dries within 3-5 seconds, adheres well to most substrates, and has high physical and chemical resistance properties. Line-X coatings are spray-applied in thick layers and can withstand a wide range of temperatures and chemicals. They are used to protect infrastructure in oil/gas, construction, transportation, and military applications.
5min Pres 2009 Li
LINE-X specializes in spray elastomers like polyurethanes and polyureas. They lead the industry in years of field testing, customer satisfaction, product quality, and innovation. Their products include polyurethane and polyurea coatings that are VOC-free, CFC-free, and provide high tensile strength, abrasion resistance, elongation, quick setup times, and chemical resistance. LINE-X serves a variety of applications through their protective coatings including use in the military, municipalities, industrial, commercial, environmental, safety, residential, and recreational sectors.
Sikalastic 560 leaflet aus
Sikalastic-560 is a hybrid, economical and eco-friendly waterproofing solution based on Sika Co-Elastic Technology. It can be used for exposed waterproofing on roofs and for external waterproofing under tiles. The document provides instructions on substrate preparation, priming, application, drying times, and consumption rates for achieving various durations of waterproofing from 3 to 15 years. Sikalastic-560 offers benefits like high elasticity, crack bridging, color stability, faster drying, and environmental friendliness.
GRP-Glass Reinforced Plastic
Being part of the Speed House Group, our journey since inception in 1987 has been a very exciting one. Although the start was to supply our sister companies with minor GRP products to their prefab housing units, today I.C.C products have become a market leader in mass storage solutions for different types of liquids. Whether it’s sewerage, water or oil, we custom design and produce a solution for our clients. We have also established strategic alliances with companies in Korea, South Africa, France and Greece to ensure using the latest in technology & raw materials. In addition to water tanks I.C.C has expanded its offerings to several new products ranging from car shed, claddings, domes and solid surface products.
Groundworks and Civil Engineering Products
This document provides a summary of products for groundwork and civil engineering projects. It describes Insulslab SFRC, an innovative foundation system using expanded polystyrene pods and steel fibre reinforced concrete. It also lists products for voids, gas barriers, geotextiles, drainage and more. The document is a catalogue showcasing SIG Construction Accessories' range of civil engineering and groundwork products.
DELIVERING INNOVATIVE SOLUTIONS FOR THE GLOBAL BUILDING AND CONSTRUCTION INDU...
DELIVERING INNOVATIVE SOLUTIONS FOR THE GLOBAL BUILDING AND CONSTRUCTION INDU...Owens Corning Composites Solution Business
Owens Corning presentation by Geoffrey Wilson at JEC Europe 2014 on new innovative solutions for the global building and construction industry through glass non-wovensLewis Flooring Presentation
Reppel b.v. is a specialist in building materials that has been operating since 1930. It supplies products and services worldwide through its own branches in Europe and other locations. The company's products include composite steel decking, fireproofing materials, and industrial coatings. Reppel operates through two business units: Sales Distribution Products, which includes steel sheeting and accessories sold through construction dealers; and Sales Application Products, which provides technical support. Reppel aims to optimize existing markets and create new ones by adapting to customer needs and market developments. It offers high-quality, certified products along with sales and technical support services.
INTEGRATED GLASS SOLUTIONS TO REDUCE THE COST OF WIND ENERGY
INTEGRATED GLASS SOLUTIONS TO REDUCE THE COST OF WIND ENERGYOwens Corning Composites Solution Business
Presentation by Dr. Chris Skinner @JEC Europe 2014 on market trends for wind energy and Owens Corning integrated glass solutions to reduce the cost of wind energy for blade producers.Sika profile
Sika is a global leader in specialty chemicals and has been operating since 1910. The document discusses Sika's divisions, products, and applications. It focuses on Sika's facade, fenestration, and insulating glass (FFI) division and their silicone sealant products. Examples of projects in Taiwan using Sika products are provided.
Tensile structure in noida
e are offering an broad range of high quality Tensile Structure in Noida. Our expertise includes Auditorium Tensile Structure; Swimming pool Tensile Structure; Tensile Fabric Structures; Tensile Architecture; Tensile Umbrella for Terrace; Tensile Structure for Restaurant.
http://www.noida.fabstructure.in/
Grain Silo Installation Checklist
Grain Silo Installation Checklist consolidates most of Installation checks that one should perform while doing installation of Grain Silos so that nothing goes wrong after the installations
Coro tech overview presentation 2013
CoroTech is a corrosion preventive company that specializes is acid brick/ceramic glazed tile lining systems and modifications in all types of industries.
Please take a look at our overview and email me for more information!!
Kimberlee Hewitt
khewitt@corotech.com
CONFORTO
Conforto produces building panels made from a mixture of recycled waste, binding chemicals and emulsions. This provides a quicker, stronger and greener alternative to conventional building methods. The panels are composed of a 60%/40% cement and waste ash or slag mixture. They are produced in a factory and assembled on-site in a fraction of the time required for traditional building. Conforto's panels provide insulation, strength, and are made from recycled materials, making construction more sustainable.
Issue 18
This document discusses corrosion protection coatings for mild and galvanized steel. It summarizes three projects where Dekro Paints recommended different coatings: at Acacia Park they recommended RustRite, a decorative rust treatment; at West Coast Mall they recommended epoxy coatings; and at Merensky they recommended Hydrobond 44 and Hydrosilk. It also discusses two other projects, one involving encapsulation of asbestos and steel, and another involving coatings for a wine cellar approved by Thales that are organohalogen-free. Finally, it discusses Hydromet rust conversion coating and its properties for situations where blast cleaning is not possible.
Advanced UV Protection for Resin Based Floor Systems
Sika presented new resin technologies that provide advanced UV protection for seamless floor systems. Four technologies were introduced: 1) Sikafloor 33NA PurCem, an aliphatic polyurethane/cement top coat that allows light colored screeds while maintaining thermal shock resistance. 2) Sikafloor 217 and 510N LPL, epoxy and polyaspartic resins with improved UV resistance for use in decorative flooring. 3) Sikafloor 315N, an aliphatic polyurethane top coat with UV blocker technology. 4) Sikafloor 510N LPL, a polyaspartic resin for use in decorative flooring with improved UV resistance.
Aac block technical note by delf india dtn 1-2014
This document provides technical data and specifications for autoclaved aerated concrete (AAC) blocks according to Indian standards. It covers:
1) Manufacturing requirements including allowing up to 20% fly ash replacement and steam curing for 14-18 hours at high pressure and temperature.
2) Dimensional tolerances of less than 5mm for length and 3mm for height and width.
3) Specific requirements on density, compressive strength, water absorption, drying shrinkage, and thermal conductivity.
4) Guidance on storage, preparation, wall thickness, use of mortar, and sampling for testing according to Indian standards.
Epoxy Coving
This document provides information on Monarch's floor screed and topping products for repairing and protecting floors. It discusses Monarch's range of cementitious underlayments, screed mortars, floor toppings, primers, and accessories. Product groups include floor screeds for repairs under 10mm and over 10mm, floor toppings, silicate floor hardeners, and non-skid/anti-slip toppings. Applications include industrial, commercial, and institutional buildings. The document lists partial clientele and highlights how Monarch's products provide cost savings through extended equipment life, reduced downtime, and competitive pricing.
Paxcon presentation
LINE-X developed a blast-resistant coating called PAXCON using polyurethane and polyurea. Testing showed that PAXCON could withstand explosions 20 times greater than an uncoated wall. The U.S. Pentagon and Air Force have used PAXCON for blast mitigation following rigorous testing. PAXCON has various military and civilian applications for impact and blast protection.
LINE-X Dealership Opportunities for the United Kingdom and Germany
LINE-X Dealership Opportunities
LINE-X Werden sie zum Dealer Deutschland
Enterprise Use Of Social Media
Using Social Media in Large Organizations discusses the importance of social media for businesses and provides best practices for using social media effectively. It notes that over 41% of internet users visit social networks monthly and that younger users are more likely to use social media to socialize and create content. The document outlines both potential downsides like forcing brand perceptions and upsides like intelligence gathering if social media is used properly. It recommends engaging with customers, monitoring brands, intervening early in conversations, and integrating social media efforts across departments from the bottom-up.
XA-200, Finland - Wheeled Armoured Vehicle
The XA-200 series armoured 6x6 wheeled vehicle is an updated production version of the XA series, with over 700 produced. It is manufactured by Patria Vehicles of Finland and serves in the armies of Finland, Sweden, and Norway. The XA-200 has a top speed of 95km/h and range of 600km, and can ford 1.5m of water. Various turrets can be fitted with weapons like a 7.62mm or 90mm cannon. The AMOS advanced mortar system was integrated on the XA-200 chassis for the Finnish Army. The XA-202 command vehicle version has a divided hull and auxiliary power unit.
TATA LAMV, India - Light Armoured Multipurpose Vehicle For Indian Army
The TATA LAMV is a new light patrol vehicle developed by TATA Motors for troop transportation, reconnaissance, and urban warfare. It has a composite crew pod that houses 2-6 soldiers and a modular V-shaped hull. The LAMV can be equipped with cameras, weapons like a 7.62mm or 12.7mm machine gun, and armor protection derived from the Supacat SPV400 to shield against small arms fire and explosions.
Kaplan light tracked reconnaissance vehicle, turkey
The Kaplan LAWC-T is a light armored vehicle developed by FNSS Savunma Sistemleri for reconnaissance, anti-armor, and fire support missions. It features sloped armor, a low profile, and sophisticated imaging and sensor systems. The vehicle can be armed with machine guns or anti-tank missiles and offers protection against heavy machine gun fire. It is powered by a diesel engine and automatic transmission, giving it a speed of 70 km/h and range of 600 km on roads or cross-country.
Bastion patsas light wheeled armoured vehicle, france
The Bastion Patsas is a light wheeled armoured vehicle developed in France by ACMAT for use by French special forces. It comes in two variants, the Bastion Patsas which is a semi-open top design for reconnaissance and assault, and the Bastion APC which is configured for troop transport. The vehicle is intended to withstand extreme weather conditions and provide ballistic protection levels 1-3 as well as mine protection level 2. It has a five-liter turbo diesel engine and can carry 300L of fuel.
13 January 2015: Armoured Trials and Development Unit
The Armoured Trials and Development Unit (ATDU):
- Represents the user (soldier) perspective and provides specialist advice on armored/tracked vehicles.
- Conducts user trials, development, and experimentation on mounted close combat equipment to support operations and acquisition programs.
- Works with various military organizations and industry to ensure equipment meets requirements through trials at different stages from initial designs to final acceptance.
Armoured vehicle magazine
Check all available armoured vehicles from MSPV armoured vehicle, analyze the review report, armoured protection levels, comparison with other models, test drive report, new armoring technologies, new vehicle designs, armoring equipment, etc.
Contact http://www.mspv.com for more details.
Sky X Tech Presentation
Sky X is a new technology that overcomes restrictions of using TCP/IP over satellite networks by using a new protocol called Xpress Transport Protocol (XTP). It works by splitting connections and compressing data at Sky X gateways on the client and server sides, translating between XTP and TCP transparently. This improves performance over satellite networks by 3-10x. Future enhancements involving XipLink will further improve Sky X's ability to handle large amounts of data transmission expected with developing technologies.
Komatsu lav (light armoured vehicle), japan
The Komatsu LAV is a light armored vehicle developed in 1997 and introduced in 2002 for the Japan Ground Self Defence Forces. It was deployed in the Iraq War. The 4x4 wheeled LAV is produced by Komatsu and resembles the French VBL vehicle. It is armed with a machine gun or anti-tank missiles and has a welded steel armor construction that provides protection for its four-person crew. The LAV has good mobility and can travel over 200 miles without refueling.
Evolution of Armoured Fighting Vehicles 1
1) Armoured fighting vehicles (AFVs) first emerged in World War 1 as tanks were developed to help break trench warfare deadlocks.
2) Over the decades, AFVs evolved significantly through different wars and conflicts. New models incorporated lessons learned and adapted to changing threats and technologies.
3) AFVs fill an important role in modern combat by providing protected mobility, firepower, and the ability to transport troops across difficult terrain. They have been integral to operations in conflicts like the Gulf War, Afghanistan, and the Battle of 73 Easting.
Advanced Composite Materials & Technologies for Defence
This document discusses advanced composite materials and technologies for defense applications. It covers composites for armor applications, including novel ceramic materials and modeling of material response to high-rate loading. It discusses fibers and resins used in ballistic armor composites. Different threats are outlined and the technical requirements for armor are discussed. Body armor design considerations around weight, flexibility and cost are presented.
More Related Content
What's hot
Sika profile
Sika is a global leader in specialty chemicals and has been operating since 1910. The document discusses Sika's divisions, products, and applications. It focuses on Sika's facade, fenestration, and insulating glass (FFI) division and their silicone sealant products. Examples of projects in Taiwan using Sika products are provided.
Tensile structure in noida
e are offering an broad range of high quality Tensile Structure in Noida. Our expertise includes Auditorium Tensile Structure; Swimming pool Tensile Structure; Tensile Fabric Structures; Tensile Architecture; Tensile Umbrella for Terrace; Tensile Structure for Restaurant.
http://www.noida.fabstructure.in/
Grain Silo Installation Checklist
Grain Silo Installation Checklist consolidates most of Installation checks that one should perform while doing installation of Grain Silos so that nothing goes wrong after the installations
Coro tech overview presentation 2013
CoroTech is a corrosion preventive company that specializes is acid brick/ceramic glazed tile lining systems and modifications in all types of industries.
Please take a look at our overview and email me for more information!!
Kimberlee Hewitt
khewitt@corotech.com
CONFORTO
Conforto produces building panels made from a mixture of recycled waste, binding chemicals and emulsions. This provides a quicker, stronger and greener alternative to conventional building methods. The panels are composed of a 60%/40% cement and waste ash or slag mixture. They are produced in a factory and assembled on-site in a fraction of the time required for traditional building. Conforto's panels provide insulation, strength, and are made from recycled materials, making construction more sustainable.
Issue 18
This document discusses corrosion protection coatings for mild and galvanized steel. It summarizes three projects where Dekro Paints recommended different coatings: at Acacia Park they recommended RustRite, a decorative rust treatment; at West Coast Mall they recommended epoxy coatings; and at Merensky they recommended Hydrobond 44 and Hydrosilk. It also discusses two other projects, one involving encapsulation of asbestos and steel, and another involving coatings for a wine cellar approved by Thales that are organohalogen-free. Finally, it discusses Hydromet rust conversion coating and its properties for situations where blast cleaning is not possible.
Advanced UV Protection for Resin Based Floor Systems
Sika presented new resin technologies that provide advanced UV protection for seamless floor systems. Four technologies were introduced: 1) Sikafloor 33NA PurCem, an aliphatic polyurethane/cement top coat that allows light colored screeds while maintaining thermal shock resistance. 2) Sikafloor 217 and 510N LPL, epoxy and polyaspartic resins with improved UV resistance for use in decorative flooring. 3) Sikafloor 315N, an aliphatic polyurethane top coat with UV blocker technology. 4) Sikafloor 510N LPL, a polyaspartic resin for use in decorative flooring with improved UV resistance.
Aac block technical note by delf india dtn 1-2014
This document provides technical data and specifications for autoclaved aerated concrete (AAC) blocks according to Indian standards. It covers:
1) Manufacturing requirements including allowing up to 20% fly ash replacement and steam curing for 14-18 hours at high pressure and temperature.
2) Dimensional tolerances of less than 5mm for length and 3mm for height and width.
3) Specific requirements on density, compressive strength, water absorption, drying shrinkage, and thermal conductivity.
4) Guidance on storage, preparation, wall thickness, use of mortar, and sampling for testing according to Indian standards.
Epoxy Coving
This document provides information on Monarch's floor screed and topping products for repairing and protecting floors. It discusses Monarch's range of cementitious underlayments, screed mortars, floor toppings, primers, and accessories. Product groups include floor screeds for repairs under 10mm and over 10mm, floor toppings, silicate floor hardeners, and non-skid/anti-slip toppings. Applications include industrial, commercial, and institutional buildings. The document lists partial clientele and highlights how Monarch's products provide cost savings through extended equipment life, reduced downtime, and competitive pricing.
What's hot (9)
Advanced UV Protection for Resin Based Floor Systems
Advanced UV Protection for Resin Based Floor Systems
Viewers also liked
Paxcon presentation
LINE-X developed a blast-resistant coating called PAXCON using polyurethane and polyurea. Testing showed that PAXCON could withstand explosions 20 times greater than an uncoated wall. The U.S. Pentagon and Air Force have used PAXCON for blast mitigation following rigorous testing. PAXCON has various military and civilian applications for impact and blast protection.
LINE-X Dealership Opportunities for the United Kingdom and Germany
LINE-X Dealership Opportunities
LINE-X Werden sie zum Dealer Deutschland
Enterprise Use Of Social Media
Using Social Media in Large Organizations discusses the importance of social media for businesses and provides best practices for using social media effectively. It notes that over 41% of internet users visit social networks monthly and that younger users are more likely to use social media to socialize and create content. The document outlines both potential downsides like forcing brand perceptions and upsides like intelligence gathering if social media is used properly. It recommends engaging with customers, monitoring brands, intervening early in conversations, and integrating social media efforts across departments from the bottom-up.
XA-200, Finland - Wheeled Armoured Vehicle
The XA-200 series armoured 6x6 wheeled vehicle is an updated production version of the XA series, with over 700 produced. It is manufactured by Patria Vehicles of Finland and serves in the armies of Finland, Sweden, and Norway. The XA-200 has a top speed of 95km/h and range of 600km, and can ford 1.5m of water. Various turrets can be fitted with weapons like a 7.62mm or 90mm cannon. The AMOS advanced mortar system was integrated on the XA-200 chassis for the Finnish Army. The XA-202 command vehicle version has a divided hull and auxiliary power unit.
TATA LAMV, India - Light Armoured Multipurpose Vehicle For Indian Army
The TATA LAMV is a new light patrol vehicle developed by TATA Motors for troop transportation, reconnaissance, and urban warfare. It has a composite crew pod that houses 2-6 soldiers and a modular V-shaped hull. The LAMV can be equipped with cameras, weapons like a 7.62mm or 12.7mm machine gun, and armor protection derived from the Supacat SPV400 to shield against small arms fire and explosions.
Kaplan light tracked reconnaissance vehicle, turkey
The Kaplan LAWC-T is a light armored vehicle developed by FNSS Savunma Sistemleri for reconnaissance, anti-armor, and fire support missions. It features sloped armor, a low profile, and sophisticated imaging and sensor systems. The vehicle can be armed with machine guns or anti-tank missiles and offers protection against heavy machine gun fire. It is powered by a diesel engine and automatic transmission, giving it a speed of 70 km/h and range of 600 km on roads or cross-country.
Bastion patsas light wheeled armoured vehicle, france
The Bastion Patsas is a light wheeled armoured vehicle developed in France by ACMAT for use by French special forces. It comes in two variants, the Bastion Patsas which is a semi-open top design for reconnaissance and assault, and the Bastion APC which is configured for troop transport. The vehicle is intended to withstand extreme weather conditions and provide ballistic protection levels 1-3 as well as mine protection level 2. It has a five-liter turbo diesel engine and can carry 300L of fuel.
13 January 2015: Armoured Trials and Development Unit
The Armoured Trials and Development Unit (ATDU):
- Represents the user (soldier) perspective and provides specialist advice on armored/tracked vehicles.
- Conducts user trials, development, and experimentation on mounted close combat equipment to support operations and acquisition programs.
- Works with various military organizations and industry to ensure equipment meets requirements through trials at different stages from initial designs to final acceptance.
Armoured vehicle magazine
Check all available armoured vehicles from MSPV armoured vehicle, analyze the review report, armoured protection levels, comparison with other models, test drive report, new armoring technologies, new vehicle designs, armoring equipment, etc.
Contact http://www.mspv.com for more details.
Sky X Tech Presentation
Sky X is a new technology that overcomes restrictions of using TCP/IP over satellite networks by using a new protocol called Xpress Transport Protocol (XTP). It works by splitting connections and compressing data at Sky X gateways on the client and server sides, translating between XTP and TCP transparently. This improves performance over satellite networks by 3-10x. Future enhancements involving XipLink will further improve Sky X's ability to handle large amounts of data transmission expected with developing technologies.
Komatsu lav (light armoured vehicle), japan
The Komatsu LAV is a light armored vehicle developed in 1997 and introduced in 2002 for the Japan Ground Self Defence Forces. It was deployed in the Iraq War. The 4x4 wheeled LAV is produced by Komatsu and resembles the French VBL vehicle. It is armed with a machine gun or anti-tank missiles and has a welded steel armor construction that provides protection for its four-person crew. The LAV has good mobility and can travel over 200 miles without refueling.
Evolution of Armoured Fighting Vehicles 1
1) Armoured fighting vehicles (AFVs) first emerged in World War 1 as tanks were developed to help break trench warfare deadlocks.
2) Over the decades, AFVs evolved significantly through different wars and conflicts. New models incorporated lessons learned and adapted to changing threats and technologies.
3) AFVs fill an important role in modern combat by providing protected mobility, firepower, and the ability to transport troops across difficult terrain. They have been integral to operations in conflicts like the Gulf War, Afghanistan, and the Battle of 73 Easting.
Advanced Composite Materials & Technologies for Defence
This document discusses advanced composite materials and technologies for defense applications. It covers composites for armor applications, including novel ceramic materials and modeling of material response to high-rate loading. It discusses fibers and resins used in ballistic armor composites. Different threats are outlined and the technical requirements for armor are discussed. Body armor design considerations around weight, flexibility and cost are presented.
Under Armour Analysis
Under Armour is a leading provider of performance apparel and footwear founded in 1996. It has approximately 1,400 employees and is headquartered in Baltimore, Maryland. Under Armour designs and markets athletic performance apparel, footwear and accessories. Its main apparel lines are HEATGEAR, COLDGEAR, and ALLSEASONGEAR. Under Armour sponsors many collegiate and professional sports teams and events and has over 15,000 retail locations that carry its brand.
Slideshare ppt
Miss goodheart created a PowerPoint to test out the Slideshare tool, which was introduced to her by Sharon Tonner on January 20th, 2011.
Viewers also liked (15)
LINE-X Dealership Opportunities for the United Kingdom and Germany
LINE-X Dealership Opportunities for the United Kingdom and Germany
TATA LAMV, India - Light Armoured Multipurpose Vehicle For Indian Army
TATA LAMV, India - Light Armoured Multipurpose Vehicle For Indian Army
Kaplan light tracked reconnaissance vehicle, turkey
Kaplan light tracked reconnaissance vehicle, turkey
Bastion patsas light wheeled armoured vehicle, france
Bastion patsas light wheeled armoured vehicle, france
13 January 2015: Armoured Trials and Development Unit
13 January 2015: Armoured Trials and Development Unit
Advanced Composite Materials & Technologies for Defence
Advanced Composite Materials & Technologies for Defence
Similar to Superior Fragmentation and Spall Mitigation Coatings by LINE-X
Sanford Process Corporation Company Introduction and Recent Anodizing Develop...
Sanford Process is at the forefront of patented innovation in anodizing aluminum; with the first low voltage hard aluminum anodizing system and more recently with micro-crystalline anodizing, MICRALOX. Sanford Process licenses developed technologies and provides contract development work on an exclusive or non-exclusive basis. We deliver validated process and product design solutions with detailed instructions, and can also arrange complete part processing through our sister company, DCHN LLC.
VAC Buildcare Best Concrete Manufacturer in Mumbai
Welcome to VAC Buildcare, where we specialize in providing cutting-edge solutions for modern construction needs. With a focus on quality, innovation, and sustainability, we offer a comprehensive range of products and services tailored to meet the demands of today's construction industry. Our expertise lies in providing specialized concrete solutions, waterproofing chemicals, and admixtures that enhance the durability, strength, and performance of concrete structures. Whether you're embarking on a new construction project or looking to refurbish existing structures, our products are designed to meet your specific requirements. One of our key offerings is our waterproofing solutions, particularly for roofs and structures. We understand the importance of protecting buildings from water damage, and our range of waterproofing chemicals is designed to provide long-lasting protection against leaks, seepage, and moisture ingress. With our expertise and state-of-the-art products, we ensure that your building remains dry and structurally sound for years to come. Based in Mumbai, we serve the Navi Mumbai region with a team of highly skilled and experienced waterproofing contractors. Our commitment to quality and customer satisfaction has earned us a reputation as one of the best waterproofing companies in the area. Whether you're a homeowner, builder, or developer, you can trust VAC Buildcare to deliver reliable and effective waterproofing solutions for your project. At VAC Buildcare, we believe in adding value to every construction project we undertake. From providing innovative products to delivering exceptional service, we are dedicated to helping our clients achieve their goals with confidence. Contact us today to learn more about our products and services, and discover how we can contribute to the success of your next construction project.
At VAC Construction, we take pride in being the largest manufacturer and supplier of stamped concrete in India, revolutionizing the construction industry with our innovative products and services.
For top-notch stamped concrete services and decorative concrete floors, look no further than VAC Construction. As the largest manufacturer and supplier of stamped concrete in India, we specialize in Mumbai construction services, offering expert craftsmanship and attention to detail in every project. Whether you’re looking to enhance the aesthetic appeal of your home or create a stunning outdoor space for your business, our stamped concrete services are sure to exceed your expectations.
Choose VAC Construction for reliable, high-quality stamped concrete solutions that elevate the beauty and functionality of your space. Visit our website at VAC Construction to learn more about our services and how we can bring your vision to life
The INHANCE Advantage
For over 30 years, Inhance Technologies has been treating billions of plastics articles for a wide variety of applications.
Protect structural steel from fire - Australian Fire Control
AFC are approved and factory trained certified applicators/installers of Vermiculite Spray, Intumescent Paint Systems [Nullifire & International Paints] & ResCom Board.
40Shore company Profile 1
40Shore Africa provides corrosion and wear resistance solutions like rubber, ceramic, and epoxy coatings to protect steel tanks and equipment from chemical damage. Its vision is to be the leading service and equipment provider in Africa through a focus on quality, efficiency, safety, and skills development. The company offers lining installation, training, and specialized products like pumps, belts, and hoses to support customers in mining, petrochemical, and other industries.
Cs product presentation 2017 slideshow
Clean Seal, Inc. is a manufacturer and distributor of extruded rubber and plastic seals, springs, hose, molded products, and trim moldings located in South Bend, Indiana. Founded in 1978, Clean Seal serves hundreds of industries and prides itself on its technical expertise, large inventory, and ability to ship stock items quickly. Clean Seal focuses on continuous innovation and lean manufacturing to provide custom solutions and meet customers' sealing and insulation needs.
Rion General Presentation May 19 2015 (2)
This document provides an overview of Rion Industries, an Israeli plastics manufacturer. It summarizes Rion's capabilities such as injection molding, R&D support, mold design/manufacturing, assembly/automation, and quality certifications. It also describes markets served including medical, defense, water/agriculture, and gas industries. Rion has 300+ employees, 2 manufacturing facilities in Israel, and aims to provide tailored plastic solutions and engineering support to customers.
senthilkumar CV
Senthil Kumar has over 8 years of experience as a certified coating inspector. He has worked on various projects involving surface preparation and application of coatings to structures like vessels, pipelines, and pressure vessels. He is responsible for ensuring coating work is done according to specifications and maintains documentation. He is currently a senior coating advisor in Qatar, providing technical support and training to customers.
40ShoreAfrica Profile
40Shore Africa aims to be the most sought after service and equipment provider with a focus on quality, safety, customer service and continuous improvement. It provides lining services using rubber, ceramic and epoxy materials to protect customers' assets from corrosion, wear, and spillage. This helps minimize downtime and environmental damage while protecting customers' chemical assets and production. The company's services include rubber sheeting, conveyor belt accessories, pumps, and more. It has over 90 years of combined experience in industries like mining, petrochemical, steel, and has completed projects lining tanks, pipes and other equipment.
Surface treatment aerospace - DAES Group
Aerospace surface treatment solutions.
Ultrasonic cleaning chemical cleaning lines, shot peening, wet blast, therma spray and blast.
Motion Compensation Brochure
Hydratech Industries designs and manufactures hydraulic cylinders and accumulators for motion compensation applications in offshore oil and gas industries. They specialize in custom cylinders from concept to completion, with bores up to 30 inches and strokes up to 60 feet. Hydratech focuses on quality, safety, and meeting customers' specific needs through innovative sealing and surface technologies to protect cylinders in harsh marine environments.
Keep it Running! – Surface Drainage 201 – Design Basics for Modular Trench Dr...
Keep it Running! – Surface Drainage 201 – Design Basics for Modular Trench Dr...Communications Branding
Join Dominic Turner and Jamie Kershaw for Surface Drainage 201, the interesting conclusion to our 2 part series on Surface Drainage!
The presenters will begin by reviewing key features of modular trench drains and then get into the fascinating step-by-step process for selecting the right modular trench drain system for a project. Key considerations they will cover include system durability and site conditions. You will also learn how to determine the load category for a specific application. The presenters will finish by reviewing the basics of hydraulic calculations for trench drain sizing.APC Corporative Presentation
Steve Walters is the president of American Photonics Company (APC), which was founded in 1995 to provide optical components and solutions for laser applications. APC has grown from its founding to now have over 72,000 square feet of headquarters and manufacturing facilities where it produces over 16,000 optical parts per year. APC prides itself on manufacturing most of its products in the United States and having distribution networks in over 53 countries. It focuses on providing cheaper, faster, and better solutions for customers through technological innovation and endless pursuit of process improvements without compromising on quality.
Corporate presentation
Headway Chemicals presents its range of fire protection and sealing products for the construction industry. It distributes products from NPT Italy, including one-part polyurethane sealants for joints in concrete and buildings. It also offers polyurethane foam, passive fire protection products, and intumescent fire stopping materials like sealants, mortars, coatings, and putty. Headway has a 20-year production history, fully equipped laboratories for product development and testing, and distributes globally through partnerships like the one with NPT Italy.
Zatec High Performance Cleaning Blades
Zatec produces high performance cleaning blades for photocopier and printer manufacturers. Their blades are engineered to consistently perform over the long term and are available quickly at a competitive price. Unlike offshore alternatives, Zatec's stringent quality controls ensure consistent properties. They are also developing new blade assemblies and customizing solutions for clients.
Liquid Silicone Rubber (LSR) Processing Capabilities English
Liquid silicone rubber (LSR) in combination with other substrates, completed in a combination of injection molding, assembly and other process steps. Trelleborg Sealing Solutions is the world’s leading exponent of precision Liquid Silicone Rubber (LSR) and Two-Component (2C) manufacturing processes and tooling technology.
PLZ Aeroscience Overview Capabilities Presentation - March 24 2016
PLZ Aeroscience is a contract packaging company with 10 manufacturing locations across North America. It offers comprehensive services including R&D, regulatory support, manufacturing, quality control, distribution, and business support. PLZ has the flexibility to partner with customers to deliver innovative and compliant chemical solutions.
IMPERMEABILIZACION TRANSITABLE Tremco 2022.pdf
Con una amplia gama de soluciones para aplicaciones vehiculares, peatonales y especiales, las membranas de aplicación líquida de alto rendimiento de Tremco ofrecen una durabilidad superior a largo plazo en condiciones de servicio de tránsito.
Nuestros sistemas están diseñados para impermeabilizar estructuras, protegiendo los sustratos de los duros efectos de la intrusión química, extendiendo así el ciclo de vida de estas superficies. La capa de impermeabilización de nuestros sistemas está protegida
por varias capas superiores y de desgaste, lo que aumenta la durabilidad del sistema instalado.
Con más de 40 años de experiencia en revestimientos para tráfico, hemos creado y desarrollado productos que satisfacen las demandas únicas de cualquier proyecto. Nuestra cartera de recubrimientos aborda la velocidad de aplicación, la durabilidad, las consideraciones presupuestarias y más. También ofrecemos fórmulas Neighbor Friendly (NF) para aplicaciones en áreas sensibles y una gama totalmente compatible de selladores para detalles. Ya sea reparación/restauración o construcción nueva, Tremco tiene
soluciones comprobadas para las siguientes aplicaciones:
• Edificios de estacionamiento • Estadios • Salas de basura
• Pasarelas peatonales • Salas de máquinas • Áreas de piscina
• Balcones y terrazas • Losas recreacionales • Azoteas y cubiertas planas
senthilkumar CV
Senthil Kumar has over 8 years of experience as a NACE Level II Coating Inspector. He has extensive knowledge of surface preparation techniques and coating applications across various industries. His responsibilities include ensuring coatings are applied according to specifications, conducting inspections, and maintaining documentation. He is proficient in coating inspection methods and has experience with numerous coating products from major manufacturers.
Matrix Oil & Gas Profile
Matrix Composites & Engineering is an Australian company that specializes in engineered composite products for the oil and gas industry. Over its 25+ years of experience, Matrix has developed a wide range of proprietary composite products including centralizers, splash zone protection, riser buoyancy modules, subsea production buoyancy, and marine hose buoyancy. Matrix provides fully integrated engineering and manufacturing services from design to delivery.
Similar to Superior Fragmentation and Spall Mitigation Coatings by LINE-X (20)
Sanford Process Corporation Company Introduction and Recent Anodizing Develop...
Sanford Process Corporation Company Introduction and Recent Anodizing Develop...
VAC Buildcare Best Concrete Manufacturer in Mumbai
VAC Buildcare Best Concrete Manufacturer in Mumbai
Protect structural steel from fire - Australian Fire Control
Protect structural steel from fire - Australian Fire Control
Keep it Running! – Surface Drainage 201 – Design Basics for Modular Trench Dr...
Keep it Running! – Surface Drainage 201 – Design Basics for Modular Trench Dr...
Liquid Silicone Rubber (LSR) Processing Capabilities English
Liquid Silicone Rubber (LSR) Processing Capabilities English
PLZ Aeroscience Overview Capabilities Presentation - March 24 2016
PLZ Aeroscience Overview Capabilities Presentation - March 24 2016
Recently uploaded
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
-- June 2024 is National Volunteer Month --
Check out our June display of books on voluntary organisations
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Recruiting in the Digital Age: A Social Media Masterclass
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Company Valuation webinar series - Tuesday, 4 June 2024
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Recently uploaded (20)
LA HUG - Video Testimonials with Chynna Morgan - June 2024
LA HUG - Video Testimonials with Chynna Morgan - June 2024
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challenges
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Recruiting in the Digital Age: A Social Media Masterclass
Recruiting in the Digital Age: A Social Media Masterclass
Company Valuation webinar series - Tuesday, 4 June 2024
Company Valuation webinar series - Tuesday, 4 June 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
Superior Fragmentation and Spall Mitigation Coatings by LINE-X
- 1. BODY ARMOUR & BALLISTIC PLATE MANUFACTURERS www.line-x.co.uk
- 2. SUPERIOR FRAGMENTATION & SPALL MITIGATION COATINGS
- 3. FANTASTIC CUSTOMER/TECH SERVICE • Tech Support • On-site Equipment Install • LINE-X has over 20 Year Experience Developing Manufacturer Customer Driven Solutions
- 4. CREATING SOLUTIONS SPECIFICALLY FOR YOUR MANUFACTURING PROCESS • Identifying & Implementing Applications Focused on Increasing Product Life Cycle and Customer Satisfaction • Creating Spray Systems & Processes Aimed at Increasing Product Efficiency • Evaluating Potential Applications that Decrease Production Costs
- 5. WHY ARMOUR & BALLISTIC PLATE MANUFACTURERS CHOOSE LINE-X
- 6. LINE-X BENEFITS • Anti Spall & Fragmentation Containment • Extreme Abrasion Resistance • Rust & Corrosion Protection • Custom Colours • Proven History on Military Applications • Extensive Lab & Spall Testing
- 7. HOW IS LINE-X APPLIED? LINE-X Protective Coatings are specialised, high- performance spray-on elastomeric coatings engineered to ensure long-lasting protection to virtually any surface. LINE-X is applied via high- pressure, high temperature, air purged Graco equipment. All LINE-X products are tested for strength and stability both in the lab and in harsh, real world conditions.
- 8. FOR MORE INFORMATION CONTACT info@line-x.co.uk