Introduction to IEEE STANDARDS and its different types.pptx
Sikalastic 560 leaflet aus
1. Sika – Specialised Trade Partner
All orders are accepted subject to our current terms of sale and delivery.
Users should always refer to the most recent issue of the Product Data Sheet for the product
concerned.
Sika Australia Pty Limited
55 Elizabeth Street
Wetherill Park, NSW 2164
1300 22 33 48
aus.sika.com
Sikalastic®
-560
Know-how
from Site to Shelf
Hybrid, economical and eco-friendly
waterproofing solution based on
Sika Co-Elastic Technology (CET)
Sikalastic ®
-560
How to use Sikalstic®
-560
Substrate Preparation & Priming
All dust, loose friable material must be
completely removed from all surfaces
before application of the product,
preferably by brush and/or vacuum.
Application
Stir Sikalastic®
-560 thoroughly for 3 minutes
in order to achieve a homogeneous mix
(tool: electric stirrer 300-400 rpm).
Overmixing must be avoided to minimise
air entrainment.
Remove weak concrete surface defects
such as blowholes. Voids must be fully
exposed. High spots must be removed by e.g.
grinding.
If there are any details to waterproof always
do them first according to the same steps
of the application of Sikalastic®
-560 on the
surface. In any case, use Sikalastic®
Fleece-120
for details, connections, overlaps and
substrates with high movements or cracks.
Apply Sikalastic®
-560 with brush, roller or
spray according the system standards to
achieve.
Drying Time: (20°C, 50% air humidity)
Touch dry: 1 hour
Rain resistant: 4 hours
1st
to 2nd
layer: 6 hours
Prime the substrate with one layer
Sikalastic®
-560 thinned with 10% water.
Drying Time: (20°C, 50% air humidity)
~2 hrs
2. Fully bonded, no leaking joints VOC free/water-based White GreyRoller, brush, spray
Packaging: 20 kg 10 kg plastic
pails
Use Sikalastic®
Fleece-120 for details, repairs,
substrates with high movements or cracks and
for systems with 10 or 15 years of durability.
The Co-Elastic Technology combines the high performance of a
polyurethane dispersion with the well-known properties of an
acrylic.
Can be used for: For exposed waterproofing on roofs (non-walkable)
For external waterproofing under tiles (e.g. on balconies)
On horizontal vertical surfaces
Improved overall performance compared to conventional acrylic
dispersions.
Sikalastic®
-560
3 Years durability
0.3 mm dry film thickness
b Consumption for 2 layers:
0.9 kg/m2
5 Years durability
0.5 mm dry film thickness
b Consumption for 2 layers:
1.4 kg/m2
10 Years durability
1.0 mm dry film thickness
b Consumption for 3 layers:
2.1 kg/m2
15 Years durability
1.5 mm dry film thickness
b Consumption for 4 layers:
2.8 kg/m2
Very easy to use Seamless solution Environmental friendly
Available in 2 colours
• Higher elastic and crack-bridging
properties
• High colour stability/non-yellowing
• Higher durability
• Faster drying time
• Environmetal friendly
What is CET CO-Elastic
Technology?
One solution for different
waterproofing expectations!
Concrete
Roofing felt
Mortar
Bituminuous
Brickwork
Metal
Fibre-cement
Wood
Roof tiles
Ceramic tiles
Can be used on many materials
For waterproofing of new roofs!
For refurbishment for life cycle
extension of old roofs!
As reflective coating to enhance
energy efficiency by reducing cooling
costs!
For roofs with many details
and complex geometries!
For roof detailing in combination
with other roofing solutions!
For reparing work on roofs and
walls!
As waterproofing layer under tiles
on balconies and terraces!
a 1x Sikalastic®
-560 + 10% Water (0.30 kg/m2
)
b 1x Sikalastic®
-560
c 1x Sikalastic®
Fleece-120
a b b
a b b
a
b
c
b b
a
b
c
b b
b