Stairs.pdf
•
0 likes•29 views
This document provides design information and assumptions for the reinforced concrete design of a staircase. It includes the staircase dimensions, design loads, and a 5-step design process: 1) design of section, 2) bending moment reinforcement, 3) deflection check, 4) shear at supporting beam, and 5) critical shear from supporting beam. Reinforcement is specified as 16mm bars at 200mm centers longitudinally and 12mm bars at 300mm centers transversely. A detailing drawing then shows the reinforcement arrangement, anchorage, and staircase dimensions.
Report
Share
Report
Share
Download to read offline
Recommended
Worked examples for Cross section analysis and design software
The document contains 15 examples demonstrating the use of a software for analyzing and designing cross-sectional reinforcement of structures. The examples cover reinforcement design of beams, creating moment-curvature diagrams, checking reinforcement patterns, estimating stresses, and more. Worked examples are provided for reinforced concrete, steel, composite, and timber cross-sections to illustrate the program's capabilities.
Etabs notes-pdf
ETABS is structural analysis software used to analyze and design buildings. It was developed in 1975 by students and later released commercially in 1985 by Computers and Structures Inc. The Burj Khalifa in Dubai was one of the first major projects analyzed using ETABS.
To model a structure in ETABS, materials like concrete and steel must first be defined along with their properties. Frame sections for beams, columns, walls and slabs are then created. The grid is drawn representing the building plan. Beams, columns, walls and slabs can then be drawn by connecting nodes on the grid. Modeling tools allow modifying the structural model by merging joints, aligning elements, and editing frames.
Super-Structural Construction Work of a Six Storied Residential Building.
In this presentation I will try to uphold about my 3 month’s practicum period experience of the construction work of a six storied residential building on super structural parts.
Superstructure is building parts located above the ground level such as column, beam, floor, wall and roof.
Here I have focused on mainly Beam, Slab, Stair and Column construction process and also the problems I have faced & my contribution to solve those.
Cross section analysis and design: Worked examples
Cross Section Analysis And Design is a powerful application that can perform a wide range of cross section calculations, including the design of reinforced concrete sections. The given cross sections are built up of one or more geometric entities and can be drawn directly using the versatile featured user interface. The user can also import standard steel sections from a complete shape library according to all major codes (AISC, Australian-New Zealand, BS, Chinese, European, Indian, Aluminum etc.) There are no limitations regarding the shape, materials or loads of a section, since the program can handle any arbitrary cross section under biaxial bending and axial loads. Among its capabilities, Cross Section Analysis And Design can calculate all sectional properties, plot Moment – Curvature and Interaction diagrams, estimate the location of neutral axis under given sets of biaxial loads and plot the corresponding stress – strain diagrams as well as the resulting stress contours. The last -named items can also be calculated by providing the location of the neutral axis plane on the section. Moreover, the program fully complies with all major codes concerning reinforced concrete sections (AASHTO, UBC, AS 3600, IS 456, ACI 318, BS 8110, CSA A233, EC2, NZS 3101 and CP 65). The user can also perform a reinforcement design according to above listed codes, plot the matching interaction diagrams etc., or even check a given reinforcement amount for the specified load cases. The stress – strain curve of concrete, reinforcement and other materials is specified as per the defined Analysis Parameters Sets. Thus calculations can be performed for many design situations, such as Ultimate/Serviceability or custom defined Limit States, with an automatic adjustment of the material properties, safety factors etc. A large material library is also available according to almost all concrete/reinforcement material specifications. Apart from concrete and reinforcement materials, the user can specify custom linear, bilinear, trilinear parabolic or fully general materials.
report2
Thank you for providing the project overview. The HIDCO Convention Centre seems like an impressive and large scale project.
DCE.DOCX
The document provides the teaching and examination schedule for the 5th semester of a civil engineering course. It includes the list of courses being taught, the teaching scheme detailing the instruction periods and credits for each course, and the examination scheme specifying the evaluation parameters for continuous internal evaluation and semester end examination. The courses include Reinforced Concrete Structures, Construction Management and Entrepreneurship, Water Supply and Sanitary Engineering, electives, structural engineering drawing, construction technology lab, civil engineering computer applications lab, programming in C lab, and project work. The document also provides the course content and blue print of marks for the semester end examination of Reinforced Concrete Structures course.
UMN_Capstone_4F_BKBM_FinalReport
This letter summarizes the structural design of a 250,000 square foot, 6-story student housing project near the University of Minnesota. A team of 4 engineers spent 15 weeks completing the design, which included wood framing for the top 5 floors supported by a single story precast concrete podium. The total cost for the structural design work was $105,770. The attached report provides analysis and design details for the wood frame, precast concrete levels, and spread footing foundation.
Final Report (Group 5)
This document provides a design summary for Bridge 205 of the I-35W Extension Project. The project involved designing pre-tensioned prestressed concrete girders for the seven spans of the bridge using PGSuper software. Span 2, the longest at 230.58 feet, required 15 Tx70 girders to meet stress limits, while the other spans used mostly 5 Tx54 girders, except Span 4 which used 5 Tx70 girders. Analysis was performed for moments, shears, stresses, deflections and other limit states. Design details such as mild steel reinforcement, girder schedules, and shop drawings are provided to summarize the project.
Recommended
Worked examples for Cross section analysis and design software
The document contains 15 examples demonstrating the use of a software for analyzing and designing cross-sectional reinforcement of structures. The examples cover reinforcement design of beams, creating moment-curvature diagrams, checking reinforcement patterns, estimating stresses, and more. Worked examples are provided for reinforced concrete, steel, composite, and timber cross-sections to illustrate the program's capabilities.
Etabs notes-pdf
ETABS is structural analysis software used to analyze and design buildings. It was developed in 1975 by students and later released commercially in 1985 by Computers and Structures Inc. The Burj Khalifa in Dubai was one of the first major projects analyzed using ETABS.
To model a structure in ETABS, materials like concrete and steel must first be defined along with their properties. Frame sections for beams, columns, walls and slabs are then created. The grid is drawn representing the building plan. Beams, columns, walls and slabs can then be drawn by connecting nodes on the grid. Modeling tools allow modifying the structural model by merging joints, aligning elements, and editing frames.
Super-Structural Construction Work of a Six Storied Residential Building.
In this presentation I will try to uphold about my 3 month’s practicum period experience of the construction work of a six storied residential building on super structural parts.
Superstructure is building parts located above the ground level such as column, beam, floor, wall and roof.
Here I have focused on mainly Beam, Slab, Stair and Column construction process and also the problems I have faced & my contribution to solve those.
Cross section analysis and design: Worked examples
Cross Section Analysis And Design is a powerful application that can perform a wide range of cross section calculations, including the design of reinforced concrete sections. The given cross sections are built up of one or more geometric entities and can be drawn directly using the versatile featured user interface. The user can also import standard steel sections from a complete shape library according to all major codes (AISC, Australian-New Zealand, BS, Chinese, European, Indian, Aluminum etc.) There are no limitations regarding the shape, materials or loads of a section, since the program can handle any arbitrary cross section under biaxial bending and axial loads. Among its capabilities, Cross Section Analysis And Design can calculate all sectional properties, plot Moment – Curvature and Interaction diagrams, estimate the location of neutral axis under given sets of biaxial loads and plot the corresponding stress – strain diagrams as well as the resulting stress contours. The last -named items can also be calculated by providing the location of the neutral axis plane on the section. Moreover, the program fully complies with all major codes concerning reinforced concrete sections (AASHTO, UBC, AS 3600, IS 456, ACI 318, BS 8110, CSA A233, EC2, NZS 3101 and CP 65). The user can also perform a reinforcement design according to above listed codes, plot the matching interaction diagrams etc., or even check a given reinforcement amount for the specified load cases. The stress – strain curve of concrete, reinforcement and other materials is specified as per the defined Analysis Parameters Sets. Thus calculations can be performed for many design situations, such as Ultimate/Serviceability or custom defined Limit States, with an automatic adjustment of the material properties, safety factors etc. A large material library is also available according to almost all concrete/reinforcement material specifications. Apart from concrete and reinforcement materials, the user can specify custom linear, bilinear, trilinear parabolic or fully general materials.
report2
Thank you for providing the project overview. The HIDCO Convention Centre seems like an impressive and large scale project.
DCE.DOCX
The document provides the teaching and examination schedule for the 5th semester of a civil engineering course. It includes the list of courses being taught, the teaching scheme detailing the instruction periods and credits for each course, and the examination scheme specifying the evaluation parameters for continuous internal evaluation and semester end examination. The courses include Reinforced Concrete Structures, Construction Management and Entrepreneurship, Water Supply and Sanitary Engineering, electives, structural engineering drawing, construction technology lab, civil engineering computer applications lab, programming in C lab, and project work. The document also provides the course content and blue print of marks for the semester end examination of Reinforced Concrete Structures course.
UMN_Capstone_4F_BKBM_FinalReport
This letter summarizes the structural design of a 250,000 square foot, 6-story student housing project near the University of Minnesota. A team of 4 engineers spent 15 weeks completing the design, which included wood framing for the top 5 floors supported by a single story precast concrete podium. The total cost for the structural design work was $105,770. The attached report provides analysis and design details for the wood frame, precast concrete levels, and spread footing foundation.
Final Report (Group 5)
This document provides a design summary for Bridge 205 of the I-35W Extension Project. The project involved designing pre-tensioned prestressed concrete girders for the seven spans of the bridge using PGSuper software. Span 2, the longest at 230.58 feet, required 15 Tx70 girders to meet stress limits, while the other spans used mostly 5 Tx54 girders, except Span 4 which used 5 Tx70 girders. Analysis was performed for moments, shears, stresses, deflections and other limit states. Design details such as mild steel reinforcement, girder schedules, and shop drawings are provided to summarize the project.
K Project final report
This document presents a finite element analysis of the turbine vane seal support (TVSS) component of a Rolls-Royce T56 turboprop engine. A student project team modeled the combustion gas flow, determined the resulting forces on the stator vanes, and performed static analysis to calculate loads on the TVSS. Two-dimensional and three-dimensional finite element models of the TVSS were created to analyze stresses. The goal was to predict the maximum machining depth allowed for a repair process, but both FEMs predicted failure under normal loads due to conservative load assumptions. The document outlines areas for future work.
Meen 442 Journal Final Pdf V2
The document summarizes the design of a two-stage planetary gearbox with an overall gear ratio of 10:1 for a 1 HP 3600 RPM NEMA C face motor. Key aspects of the design include:
- Choosing a modular value of 1 and ring gear diameter of 160mm for the first stage.
- Calculating gear ratios, sizes, and speeds for each stage using standard gear equations.
- Performing stress analysis, force calculations, and shaft/bearing design using equations from references.
- Creating 3D CAD models and performing FEA in SolidWorks to validate stress calculations and ensure proper function.
- Producing engineering drawings of the design for manufacturing.
The analytical
STRUCTURAL ENGINEERING
Cheap Assignment Help, an online tutoring company, provides students with a wide range of online assignment help services for students studying in classes K-12, and College or university. The Expert team of professional online assignment help tutors at Cheap Assignment Help .COM provides a wide range of help with assignments through services such as college assignment help, university assignment help, homework assignment help, email assignment help and online assignment help. Our expert team consists of passionate and professional assignment help tutors, having masters and PhD degrees from the best universities of the world, from different countries like Australia, United Kingdom, United States, Canada, UAE and many more who give the best quality and plagiarism free answers of the assignment help questions submitted by students, on sharp deadline. Cheap Assignment Help .COM tutors are available 24x7 to provide assignment help in diverse fields - Math, Chemistry, Physics, Writing, Thesis, Essay, Accounting, Finance, Data Analysis, Case Studies, Term Papers, and Projects etc. We also provide assistance to the problems in programming languages such as C/C++, Java, Python, Matlab, .Net, Engineering assignment help and Finance assignment help. The expert team of certified online tutors in diverse fields at Cheap Assignment Help .COM available around the clock (24x7) to provide live help to students with their assignment and questions. We have also excelled in providing E-education with latest web technology. The Students can communicate with our online assignment tutors using voice, video and an interactive white board. We help students in solving their problems, assignments, tests and in study plans. You will feel like you are learning from a highly skilled online tutor in person just like in classroom teaching. You can see what the tutor is writing, and at the same time you can ask the questions which arise in your mind. You only need a PC with Internet connection or a Laptop with Wi-Fi Internet access. We provide live online tutoring which can be accessed at anytime and anywhere according to student’s convenience. We have tutors in every subject such as Math, Chemistry, Biology, Physics and English whatever be the school level. Our college and university level tutors provide engineering online tutoring in areas such as Computer Science, Electrical and Electronics engineering, Mechanical engineering and Chemical engineering.
Regards
http://www.cheapassignmenthelp.com/
http://www.cheapassignmenthelp.co.uk/
Steel Compliance from the Consulting Engineer's Perspective
This is a presentation I gave in Melbourne at the ACRS Seminar in October. It lists what the engineer does, and what they don't do regarding the checking the compliance of steel to Australian Standards.
Is.sp .6.1.1964
This document provides information on the disclosure of a public safety standard by the Bureau of Indian Standards (BIS) to promote transparency and access to information. It aims to make this standard available, especially to disadvantaged communities and those in education, so that important information can be disseminated accurately to the public in a timely manner. The attached document is the 1964 edition of the BIS handbook for structural engineers, which provides structural steel section properties to facilitate design computations for steel structures according to the Indian code of practice.
Is.sp.6.1.1964
This document provides information on the disclosure of a public safety standard by the Bureau of Indian Standards (BIS) to promote transparency and access to information. It aims to make this standard available, especially to disadvantaged communities and those in education, so that important information can be disseminated accurately to the public in a timely manner. The attached document is the 1964 edition of the BIS handbook for structural engineers, which provides structural steel section properties to facilitate design computations for steel structures according to the Indian code of practice.
is.sp.6.1.1964 Structural Steel Section.pdf
This document provides information on the publication of an Indian Standard for structural steel sections by the Bureau of Indian Standards. It aims to promote transparency and access to information for citizens. Some key points:
1) The standard is being published to provide practical right to information for citizens to access public authorities' documents and promote transparency in their work.
2) The attached steel standard is of particular interest to disadvantaged communities and those in education, so it is being made publicly available.
3) The standard is for structural steel sections and is being accurately disseminated to the public in a timely manner.
4) It provides guidance on structural engineering and structural sections for use in design and construction.
Handbook-for-Structural-Engineers-PART-1.pdf
It is beneficial for Civil Engineers....It is a Steel Table and Manual stating SP(6) part 1, use it along with IS Code-800:2007. It can be used for design and structural engineering. Handbook-for-Structural-Engineers-PART-1
Is.sp.6.1.1964
This document provides information on the disclosure of a public safety standard by the Bureau of Indian Standards to promote transparency and access to information. It aims to make this standard available, especially to disadvantaged communities and those in education, in an accurate manner. The attached standard is the ISI Handbook for Structural Engineers - Part 1 on Structural Steel Sections, which was first published in 1964 and reaffirmed in 2003. It provides properties of steel sections, plates, bars and other products to facilitate structural design and enable more efficient use of steel.
IS. SP .6.1.1964
This document provides information on the disclosure of a public safety standard by the Bureau of Indian Standards to promote transparency and access to information. It aims to make this standard available, especially to disadvantaged communities and those in education, in an accurate manner. The attached standard is the ISI Handbook for Structural Engineers - Part 1 on Structural Steel Sections, which was first published in 1964 and reaffirmed in 2003. It provides properties of steel sections, plates, bars and other products to facilitate structural design and enable more efficient use of steel.
Cube srl - Engineering Consulting
Cube Srl is an engineering firm with more than 10 years of experience in basic and detail engineering. We have developed an high level of expertise in the structural design of industrial steel structures and equipment. We act as a specialized engineering firm for EPC, contractors and manufactures providing basic and detail engineering.
Analysis and Design of RCC Residential Building in StaadPro
The design process of structural planning and design requires not only imagination and conceptual thinking but also sound knowledge of science of structural engineering besides the knowledge of practical aspects, such as recent design codes, bye laws, backed up by ample experience, intuition and judgment. The purpose of standards is to ensure and enhance the safety, keeping careful balance between economy and safety The process of design commences with planning of the structure , primarily to meet its functional requirements. Initially, the requirements proposed by the client are taken into consideration. They may be vague, ambiguous or even unacceptable from engineering point of view because he is not aware of the various implications involved in the process of planning and design , and about the limitation and intricacies of structural science..
Dbr kashmiri gate
The document provides the structural design basis for a commercial building and Kashmiri Gate project in Delhi. It summarizes the project details, structural system, design loads considered, load combinations, material strengths, modeling and analysis software used. The building has a raft foundation and composite steel frame superstructure designed as per Indian codes for earthquake and wind loads in seismic zone IV.
Technical
This presentation provides an overview of the construction process for a structural steel frame of a 4-story office building. It details the activities involved, including detailing, fabrication, transportation, and erection. Photographs and animations show the erection of the steel frame through its 6 sequenced phases. The overall goals are to introduce the user to the typical steps and provide technical insights into constructing a structural steel frame.
Cube srl - Engineering Consulting
This document provides information about CUBE Srl, an engineering consulting firm located in Terni, Italy. It offers basic and detail engineering services for steel structures, foundations, equipment, and pipe supports for power and industrial plants. The firm has 12 engineers with a total capability of 21,000 hours per year. It uses software like Tekla Structures, SAP2000, and CAESAR II. Some of its main clients include AC Boilers, Nooter Eriksen, and Demont. It has experience with projects in countries like Egypt, Qatar, the Dominican Republic, Kazakhstan, Russia, Algeria, and Italy.
L-02 Analysis and Design of One-Way Slab System B & White.pdf
The document discusses the analysis and design of one-way slab systems. It covers various concrete floor systems including beam supported slabs, flat plates, flat slabs, one-way joists, and two-way joists. The basic design steps of specifying sizes, determining loads, analyzing load effects, and designing structural elements to meet capacity requirements are outlined. As an example, the document begins the design of a one-way slab for a 90' x 60' hall, selecting a structural configuration and determining minimum slab thickness.
Etabs concrete-design
This document provides an overview of modeling a three-story L-shaped concrete building in ETABS. Key steps include generating grids, drawing wall objects to form bays, modeling an elevator core using fine grid snapping, assigning properties like slab thickness and loads, and performing both static and earthquake analysis according to UBC97 code. The example demonstrates ETABS capabilities for integrated object-based modeling of concrete structures with features like automatic load transfer, shear wall design, and modeling of floor diaphragms and cores.
3 AXIS CNC
The document describes a project to fabricate a 3-axis computer numerical control (CNC) machine carried out by 5 students under the guidance of Prof. Rahul Vaisya. It includes sections on the introduction, fabrication, design, and future scope of the project. The objectives of the project were to gain practical knowledge of industrial machines and processes that would benefit the students in their future engineering careers. The project involved designing, planning, and building a 3-axis CNC machine over two semesters.
Application & Comparison of different Formwork System used within Ind...
The document provides details about the Mivan formwork system used in Indian construction projects. It discusses the components, assembly, procedures, advantages and limitations of the Mivan formwork system. It also compares Mivan formwork components to actual site photos. The document then discusses conventional formwork systems used for foundations, walls, columns, slabs, beams and stairs. It describes the factors that determine the time for removal of formwork. Finally, it discusses potential future work on comparing different formwork systems like Doka, Peri, Coffor and Tabla formwork systems.
Different Types of Formwork Syetem Used within Indian Construction Industry
The document provides details about the Mivan formwork system used in Indian construction projects. It discusses the components, assembly, procedures, advantages and limitations of the Mivan formwork system. It also compares Mivan formwork components to actual site photos. Finally, it discusses conventional formwork systems and provides timelines for formwork removal based on cement type. The next steps would be to analyze and compare other formwork systems like Doka, Peri, Coffor and Tabla formwork.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
More Related Content
Similar to Stairs.pdf
K Project final report
This document presents a finite element analysis of the turbine vane seal support (TVSS) component of a Rolls-Royce T56 turboprop engine. A student project team modeled the combustion gas flow, determined the resulting forces on the stator vanes, and performed static analysis to calculate loads on the TVSS. Two-dimensional and three-dimensional finite element models of the TVSS were created to analyze stresses. The goal was to predict the maximum machining depth allowed for a repair process, but both FEMs predicted failure under normal loads due to conservative load assumptions. The document outlines areas for future work.
Meen 442 Journal Final Pdf V2
The document summarizes the design of a two-stage planetary gearbox with an overall gear ratio of 10:1 for a 1 HP 3600 RPM NEMA C face motor. Key aspects of the design include:
- Choosing a modular value of 1 and ring gear diameter of 160mm for the first stage.
- Calculating gear ratios, sizes, and speeds for each stage using standard gear equations.
- Performing stress analysis, force calculations, and shaft/bearing design using equations from references.
- Creating 3D CAD models and performing FEA in SolidWorks to validate stress calculations and ensure proper function.
- Producing engineering drawings of the design for manufacturing.
The analytical
STRUCTURAL ENGINEERING
Cheap Assignment Help, an online tutoring company, provides students with a wide range of online assignment help services for students studying in classes K-12, and College or university. The Expert team of professional online assignment help tutors at Cheap Assignment Help .COM provides a wide range of help with assignments through services such as college assignment help, university assignment help, homework assignment help, email assignment help and online assignment help. Our expert team consists of passionate and professional assignment help tutors, having masters and PhD degrees from the best universities of the world, from different countries like Australia, United Kingdom, United States, Canada, UAE and many more who give the best quality and plagiarism free answers of the assignment help questions submitted by students, on sharp deadline. Cheap Assignment Help .COM tutors are available 24x7 to provide assignment help in diverse fields - Math, Chemistry, Physics, Writing, Thesis, Essay, Accounting, Finance, Data Analysis, Case Studies, Term Papers, and Projects etc. We also provide assistance to the problems in programming languages such as C/C++, Java, Python, Matlab, .Net, Engineering assignment help and Finance assignment help. The expert team of certified online tutors in diverse fields at Cheap Assignment Help .COM available around the clock (24x7) to provide live help to students with their assignment and questions. We have also excelled in providing E-education with latest web technology. The Students can communicate with our online assignment tutors using voice, video and an interactive white board. We help students in solving their problems, assignments, tests and in study plans. You will feel like you are learning from a highly skilled online tutor in person just like in classroom teaching. You can see what the tutor is writing, and at the same time you can ask the questions which arise in your mind. You only need a PC with Internet connection or a Laptop with Wi-Fi Internet access. We provide live online tutoring which can be accessed at anytime and anywhere according to student’s convenience. We have tutors in every subject such as Math, Chemistry, Biology, Physics and English whatever be the school level. Our college and university level tutors provide engineering online tutoring in areas such as Computer Science, Electrical and Electronics engineering, Mechanical engineering and Chemical engineering.
Regards
http://www.cheapassignmenthelp.com/
http://www.cheapassignmenthelp.co.uk/
Steel Compliance from the Consulting Engineer's Perspective
This is a presentation I gave in Melbourne at the ACRS Seminar in October. It lists what the engineer does, and what they don't do regarding the checking the compliance of steel to Australian Standards.
Is.sp .6.1.1964
This document provides information on the disclosure of a public safety standard by the Bureau of Indian Standards (BIS) to promote transparency and access to information. It aims to make this standard available, especially to disadvantaged communities and those in education, so that important information can be disseminated accurately to the public in a timely manner. The attached document is the 1964 edition of the BIS handbook for structural engineers, which provides structural steel section properties to facilitate design computations for steel structures according to the Indian code of practice.
Is.sp.6.1.1964
This document provides information on the disclosure of a public safety standard by the Bureau of Indian Standards (BIS) to promote transparency and access to information. It aims to make this standard available, especially to disadvantaged communities and those in education, so that important information can be disseminated accurately to the public in a timely manner. The attached document is the 1964 edition of the BIS handbook for structural engineers, which provides structural steel section properties to facilitate design computations for steel structures according to the Indian code of practice.
is.sp.6.1.1964 Structural Steel Section.pdf
This document provides information on the publication of an Indian Standard for structural steel sections by the Bureau of Indian Standards. It aims to promote transparency and access to information for citizens. Some key points:
1) The standard is being published to provide practical right to information for citizens to access public authorities' documents and promote transparency in their work.
2) The attached steel standard is of particular interest to disadvantaged communities and those in education, so it is being made publicly available.
3) The standard is for structural steel sections and is being accurately disseminated to the public in a timely manner.
4) It provides guidance on structural engineering and structural sections for use in design and construction.
Handbook-for-Structural-Engineers-PART-1.pdf
It is beneficial for Civil Engineers....It is a Steel Table and Manual stating SP(6) part 1, use it along with IS Code-800:2007. It can be used for design and structural engineering. Handbook-for-Structural-Engineers-PART-1
Is.sp.6.1.1964
This document provides information on the disclosure of a public safety standard by the Bureau of Indian Standards to promote transparency and access to information. It aims to make this standard available, especially to disadvantaged communities and those in education, in an accurate manner. The attached standard is the ISI Handbook for Structural Engineers - Part 1 on Structural Steel Sections, which was first published in 1964 and reaffirmed in 2003. It provides properties of steel sections, plates, bars and other products to facilitate structural design and enable more efficient use of steel.
IS. SP .6.1.1964
This document provides information on the disclosure of a public safety standard by the Bureau of Indian Standards to promote transparency and access to information. It aims to make this standard available, especially to disadvantaged communities and those in education, in an accurate manner. The attached standard is the ISI Handbook for Structural Engineers - Part 1 on Structural Steel Sections, which was first published in 1964 and reaffirmed in 2003. It provides properties of steel sections, plates, bars and other products to facilitate structural design and enable more efficient use of steel.
Cube srl - Engineering Consulting
Cube Srl is an engineering firm with more than 10 years of experience in basic and detail engineering. We have developed an high level of expertise in the structural design of industrial steel structures and equipment. We act as a specialized engineering firm for EPC, contractors and manufactures providing basic and detail engineering.
Analysis and Design of RCC Residential Building in StaadPro
The design process of structural planning and design requires not only imagination and conceptual thinking but also sound knowledge of science of structural engineering besides the knowledge of practical aspects, such as recent design codes, bye laws, backed up by ample experience, intuition and judgment. The purpose of standards is to ensure and enhance the safety, keeping careful balance between economy and safety The process of design commences with planning of the structure , primarily to meet its functional requirements. Initially, the requirements proposed by the client are taken into consideration. They may be vague, ambiguous or even unacceptable from engineering point of view because he is not aware of the various implications involved in the process of planning and design , and about the limitation and intricacies of structural science..
Dbr kashmiri gate
The document provides the structural design basis for a commercial building and Kashmiri Gate project in Delhi. It summarizes the project details, structural system, design loads considered, load combinations, material strengths, modeling and analysis software used. The building has a raft foundation and composite steel frame superstructure designed as per Indian codes for earthquake and wind loads in seismic zone IV.
Technical
This presentation provides an overview of the construction process for a structural steel frame of a 4-story office building. It details the activities involved, including detailing, fabrication, transportation, and erection. Photographs and animations show the erection of the steel frame through its 6 sequenced phases. The overall goals are to introduce the user to the typical steps and provide technical insights into constructing a structural steel frame.
Cube srl - Engineering Consulting
This document provides information about CUBE Srl, an engineering consulting firm located in Terni, Italy. It offers basic and detail engineering services for steel structures, foundations, equipment, and pipe supports for power and industrial plants. The firm has 12 engineers with a total capability of 21,000 hours per year. It uses software like Tekla Structures, SAP2000, and CAESAR II. Some of its main clients include AC Boilers, Nooter Eriksen, and Demont. It has experience with projects in countries like Egypt, Qatar, the Dominican Republic, Kazakhstan, Russia, Algeria, and Italy.
L-02 Analysis and Design of One-Way Slab System B & White.pdf
The document discusses the analysis and design of one-way slab systems. It covers various concrete floor systems including beam supported slabs, flat plates, flat slabs, one-way joists, and two-way joists. The basic design steps of specifying sizes, determining loads, analyzing load effects, and designing structural elements to meet capacity requirements are outlined. As an example, the document begins the design of a one-way slab for a 90' x 60' hall, selecting a structural configuration and determining minimum slab thickness.
Etabs concrete-design
This document provides an overview of modeling a three-story L-shaped concrete building in ETABS. Key steps include generating grids, drawing wall objects to form bays, modeling an elevator core using fine grid snapping, assigning properties like slab thickness and loads, and performing both static and earthquake analysis according to UBC97 code. The example demonstrates ETABS capabilities for integrated object-based modeling of concrete structures with features like automatic load transfer, shear wall design, and modeling of floor diaphragms and cores.
3 AXIS CNC
The document describes a project to fabricate a 3-axis computer numerical control (CNC) machine carried out by 5 students under the guidance of Prof. Rahul Vaisya. It includes sections on the introduction, fabrication, design, and future scope of the project. The objectives of the project were to gain practical knowledge of industrial machines and processes that would benefit the students in their future engineering careers. The project involved designing, planning, and building a 3-axis CNC machine over two semesters.
Application & Comparison of different Formwork System used within Ind...
The document provides details about the Mivan formwork system used in Indian construction projects. It discusses the components, assembly, procedures, advantages and limitations of the Mivan formwork system. It also compares Mivan formwork components to actual site photos. The document then discusses conventional formwork systems used for foundations, walls, columns, slabs, beams and stairs. It describes the factors that determine the time for removal of formwork. Finally, it discusses potential future work on comparing different formwork systems like Doka, Peri, Coffor and Tabla formwork systems.
Different Types of Formwork Syetem Used within Indian Construction Industry
The document provides details about the Mivan formwork system used in Indian construction projects. It discusses the components, assembly, procedures, advantages and limitations of the Mivan formwork system. It also compares Mivan formwork components to actual site photos. Finally, it discusses conventional formwork systems and provides timelines for formwork removal based on cement type. The next steps would be to analyze and compare other formwork systems like Doka, Peri, Coffor and Tabla formwork.
Similar to Stairs.pdf (20)
Steel Compliance from the Consulting Engineer's Perspective
Steel Compliance from the Consulting Engineer's Perspective
Analysis and Design of RCC Residential Building in StaadPro
Analysis and Design of RCC Residential Building in StaadPro
L-02 Analysis and Design of One-Way Slab System B & White.pdf
L-02 Analysis and Design of One-Way Slab System B & White.pdf
Application & Comparison of different Formwork System used within Ind...
Application & Comparison of different Formwork System used within Ind...
Different Types of Formwork Syetem Used within Indian Construction Industry
Different Types of Formwork Syetem Used within Indian Construction Industry
Recently uploaded
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, Serbia6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Stairs.pdf
- 1. 1 Practice of reinforced concrete design Staircase Nyazi Tawfeeg _ 5 th Structures The dimensions (assuming the standard for Risers & Treads): Staircase
- 2. 2 Practice of reinforced concrete design Staircase Nyazi Tawfeeg _ 5 th Structures The Design Design information and Assumptions: Other information shown and included in the attached drawings. & : o o o o o (considering 1m width) BS 8110-1-1997 Staircase Spanning longitudinally Simple Mild : Dead Load: Life Load:
- 3. 3 Practice of reinforced concrete design Staircase Nyazi Tawfeeg _ 5 th Structures Design steps: S.U.S.T Collage of engineering Civil Dep. (structure) Job No. : ………… Project: ………………………………………………………………… Calculation for: …………………………………………………….. ………………………………………………………………………………. Design Practice Sheet No. : ………… Date: …………………. By: …………………….. Ref. Calculations Output 1) Design & : o 2) Bending Moment reinforcement: 3) Recheck the deflection: Provide 16mm@200mm c/c (Longitudinally) Provide 12mm@300mm c/c (Transversely)
- 4. 4 Practice of reinforced concrete design Staircase Nyazi Tawfeeg _ 5 th Structures S.U.S.T Collage of engineering Civil Dep. (structure) Job No. : ………… Project: ………………………………………………………………… Calculation for: …………………………………………………….. ………………………………………………………………………………. Design Practice Sheet No. : ………… Date: …………………. By: …………………….. Ref. Calculations Output 4) The shear (at the supporting beam): 5) Critical shear (at from supporting beam):
- 5. 5 Practice of reinforced concrete design Staircase Nyazi Tawfeeg _ 5 th Structures Detailing Drawing The following drawing shows and details the arrangement of the main reinforcing bars and secondary reinforcing bar. Also details the anchorage of reinforcement and staircase dimensions.
- 6. 6 Practice of reinforced concrete design Staircase Nyazi Tawfeeg _ 5 th Structures