Mipa Alu-Chrom-Spray is a high quality heat resistant aluminium coating for metal substrates like exhaust systems. It provides anti-corrosive protection and is conductive, making it suitable for spot welding. The coating is heat resistant up to 800°C and highly resistant to acids and lyes. It requires pre-cleansing with a silicone remover and should be applied in 1-2 thin coats at a distance of 20-30cm, with 1-2 minutes between coats. The coating dries within 10 minutes and reaches full hardness after 24 hours.

1. Mipa Alu-Chrom-Spray
Product Information D - 1/0211
Art.Nr.: 213510000
Mipa Alu-Chrom Spray is a special high quality heat resistant aluminium coating with anti-corrosive protection.
for all metal substrates, i.e. exhaust systems, aluminium components, galvanised surfaces etc.
Conductive and suitable for spot welding. Highly resistant against numerous acids and lyes.
Heat resistant up to 800°C. No abrasion resistance!
Substrate:
Ferrous metals
Pretreatment / Cleansing:
Pre-cleansing with Mipa Silikonentferner
Characteristics:
Heat resistant up to 800°C
High protection against corrosion
99,5% pure Aluminium
Specially suitable for spot welding
Conductive
No abrasion resistance!
Colour / Aluminium / Chrome
Grade of Gloss:
Preparation: Shake can vigorously until the mixing balls move freely!
Application: Spray to test - Spraying distance approx. 20 - 30 cm
1- 2 coats, do not exeed a dry film thickness of 30 - 40 m.
Flash-off: 1 - 2 min. between each coating
After use: Turn can upside down and spray until the valve is clean, this
prevents the valve from clogging up.
Drying Times:
Drying: Dust dry: approx. 10 min.
Set to touch: approx. 1- 2 h.
Full hardness: 24 h.
Processing
Conditions: From +10°C and up to 80% relative air humidity
Storage: In tightly closed original containers at least 2 years shelf life
VOC- EC limiting value for the product (cat. B/e): 840 g/l (2007)
Regulation: This product contains max. 500 g/l VOC [ 4.17 lbs/gal]
Safety
Information: Read the corresponding Material Safety Data Sheet
The data sheet sheet is for information purpose only! The information given is in accordance to our knowledge up to the latest
standards and is based on years of experience in the manufacture of our products. The information is non binding and without guarantee.
MIPA AG - Am Oberen Moos 1 - D-84051 Essenbach - Tel: +49 (0) 8703 / 922-0 - Fax: +49 (0) 8703 / 922-100
E-Mail: mipa@mipa-paints.com - www.mipa-paints.com