Finishing equipments

Finishing Finishing Equipments

Spraying Equipment

zaini@selectvest.com Wisdom Management Services (M) Sdn. Bhd. 1


EAGLESPRAY® HVLP "TURBINE" SPRAY
SYSTEM

EagleSpray® systems can be used with virtually all
sprayable materials and coatings. Designed originally
for spraying water based finishes, other materials
such as nitrocellulose lacquers, all types of stains,
latex paints, enamels, varnishes, polyurethane,
polyesters, automotive finishes, textured finishes,
most contact cements will spray out super smooth.

The clean warm air provides faster build, rapid drying
time and faster film cure. Hence, finishing time can be cut by nearly 45% with
improved quality and appearance over compressed air, coupled with our unique
dual filtration system, rubbing out of fine finishes is virtually eliminated. "Fish-
eyes" are minimized and surface blushing with nitrocellulose lacquers is a thing
of the past. Save money too in finishing cost - up to 50% less in material
consumption due to no over spray.

LYNX-3™ HVLP CONVERSION SPRAY GUN

Converts your compressed air to HVLP. Simply connect our LYNX™-3 HVLP
spray guns directly to your shop's air line and you are ready to reap the benefits
of a High Volume Low Pressure spray system. Operating at standard air line
pressures, the LYNX™-3 HVLP Guns create less than 10 psi of pressure at the
gun while maintaining a minimum of 65% transfer efficiency. No matter what you
are spraying, you are sure to save up to 50% in material consumption. The
LYNX™-3 HVLP guns are the best on the market based on customer feedback
and benefit to cost ratio.

It requires only 4 cfm of air flow only or, a 1 hp* ordinary shop compressor (3 hp
recommended) to do an excellent spray finishing job with all sprayable materials
including all HYDROCOTE® finishes and other water-based finishes. Other
conversion guns currently on the market require a minimum of a 5 HP
compressor to deliver less than equivalent results.

LYNX™-3 HVLP Guns are as easy to use as the high pressure gun you're using



Wood and finish care
marble, and tile. It helps your furnishings retard oxidation,
tarnish, mold and mildew. It stains, seals, and finishes new
wood in one easy step and leaves a beautiful wax finish.
Contains Toluene.
Due to freight restrictions, this item can only be shipped via
UPS ground service only. Briwax cleans and conditions
wood, metal, fiberglass.
Briwax 2000 features the same great finish but uses mineral
Spirits instead of toluene which is safer on lacquer finishes.

Restores original color and luster in wood finishes.

Eliminates white heat rings and water marks, scratches.

Removes sun fade and oxidation.

Will not dissolve the existing finish.

RESTORE IT -- DON'T STRIP IT!

Tibet Almond Stick

A handy scratch remover for all types of wood.

Just rub the end of the stick lightly over a white scratch and
it's gone! Works Great! Not recommended for gouges, deep
scratches, or bleached finishes.

Kotton Klenser Products

Regular Kotton Klenser Cleaner

For use on all wood finishes, kitchen cabinets, woodwork,
paneling, and Formica, ceramic, plastic, tile, vinyl, leather,
marble, painted surfaces, and even whitewall tires. Cleans
and removes water and heat marks, wax and silicone
buildup, tree sap, and smoke damage residue.



Kotton Klenser Lemon Oil Beeswax Polish

Polish with lemon oil beeswax for a protective moisture,
alcohol, and acid proof finish.

Kotton Klenser Oil Painting Restoring Oil

Gives luster and protection to paintings, old and new, when
used with regular Kotton Klenser Cleaner.

Penthouse Furniture polish.

This is a good product I use professionally. It contains a
small amount of silicone wax for leaving the surface slick,
glossy and protected. It is a good product for high gloss
sheens and not recommended for dull or satin sheens.



Fillers and adhesives

Epoxy fillers and adhesives.

Quickwood Epoxy filler

Fill holes, Scratches, gouges, cracks, dry rot, and knot holes.
Repair furniture molding and frames. Can be sculpted or carved
for intricate detail. Interior and exterior applications.
Reshape wood carvings, remold wood knobs and handles.

Repair, Rebuild, Restore Anything Made of Wood

Quickwood is a remarkable polymer compound for instant wood
repair. Easy to use Quickwood molds like clay then dries like
wood in 30 minutes. It is also good for wood to wood and wood
to metal bonding.
REPAIRITQUIK Multi Purpose Epoxy Putty 4 oz. Tube Repairs,
bonds, fills, seals or rebuilds and cures rock hard. Adheres to
metals, wood, glass, ceramic, porcelain, and most plastics. Will
not shrink or pull away. Contains no solvents. Mixes by hand
kneading and molds like clay. Hardens in minutes.
30 Minutes of working time
Specially formulated to bond fiberglass, wood, metals, plastics,
etc. Produces a tough permanent bond in just 30 minutes. It is
resistant to shock and solvents, non-brittle , easy to sand, and
has excellent gap filling characteristics.

This product retains the physical strengths of epoxy adhesives
while offering the added advantage of quick setting even in thin
films at low temperatures. It will bond wood and nearly all other
types of materials, including concrete. It achieves it's terrific
strength as a result of a chemical reaction when mixed with the
hardening agent.

Five minutes of working time Non-shrinking



Zap Cyano Acrylate Glues

These Zap Glues are a great time saver for the professional and the home user.
They work great on small veneer jobs, re-gluing chairs, and other small jobs or
as a consolidant on soft or crumbling materials. They will glue almost any porous
surface. Please Note: This glue has a twelve month shelf life. To extend the shelf
life of un-opened bottle almost indefinitely, store them in a freezer at 0 degrees
Fahrenheit. It must be warmed to room to room temperature before use. Do not
store opened bottles in a freezer or refrigerator. This glue will bond skin instantly
and, so be very cautious.

Zap/CA Super thin penetrating adhesive

Zap/CA is very thin, penetrating, and instant curing. It's
wicking action allows assembly prior to gluing. Hold parts
tightly together and apply the glue outside of the seam. It
penetrates into the joint and cures in 10 or 15 seconds. It is
great for tightening loose joints that can't be disassembled. It
also is great for gluing down loose veneer when you can't get
conventional glues worked under it. For faster curing, use the
Zip Kicker accelerator.

CA+/ Zap-A-Gap Thick Gap filling adhesive

Zap-a- Gap is a bit thicker and slower than Zap/CA, allowing
more open time. It is a great gap filling adhesive for those jobs
with spaces or cracks of less than 1/16". Apply the glue then
place the parts together. Cures in 30 to 45 seconds or instantly
when used with the Zip Kicker accelerator.



CA-Slo Zap Super thick Slow cure CA adhesive

This thick glue is often used as a filler. It is best for those jobs
where assembly time is required, allowing 30 to 40 seconds of
positioning time. Cures in one to two minutes. Speed up the
cure time with Zip Kicker.

Zip Kicker Accelerator
Handy plastic bottle with pump sprayer. Zip Kicker has a
special formula designed to instantly set the surface of the Zap
glues. Just spray on! (Note: The glue will still need to be
allowed it's full cure time.)

Z7 Debonder - Debonding agent for Zap Glues

Uniquely formulated water based Z7 Debonder will soften and
remove cured zap adhesives. Simply apply to cured adhesive,
allow to penetrate, (26 Seconds), rub off softened adhesive, It is
also handy for when you glue your fingers together or to an
item. Keep it at arms reach when working with Zap Glues.

Z-End Tips - Replacement Tips for the Zap Glue bottles.


Finishing equipments

More Related Content

What's hot

Viewers also liked

Similar to Finishing equipments

More from Clean Agent Sdn Bhd

Finishing equipments