Skippy manual -1.1 Adama Robotics - Obstacle Avoidance Robot
โขDownload as PPTX, PDFโข
0 likesโข404 views
This is the manual for Skippy-Obstacle Avoidance Robot of Adama Robotics. For more information: Visit us at https://www.adamarobotics.com Skippy Kit contains: - Arduino Uno - Breadboard - Wires - DC Motors - Chassis - Screws - Ultrasonic Sensor - HC -SR04 - Battery
Report
Share
Report
Share
Recommended
Maze follower robot
The document describes how to build a maze follower robot using Arduino, IR sensors, and a motor driver. The robot uses 4 IR sensors - two to follow lines and two more to detect intersections and choose a path. It can identify straight paths, left turns, right turns, intersections, and dead ends. The robot follows a left-hand or right-hand wall tracking algorithm to navigate the maze and reverse direction when it reaches a dead end. Components include an Arduino, IR sensors, motor driver, battery, and wheels. The circuit is assembled on a breadboard and code is used to control motor direction and speed based on sensor input.
Gesture controlled robot with arm for phyically handicapped peoples
This document proposes the development of a wireless controlled robotic arm that can be operated through gestures detected by robotic gloves. The robotic arm system consists of a transmitter section integrated into the gloves with sensors, and a receiver section controlling the robotic arm and a robot. The gloves detect gestures through sensors like gyroscopes and accelerometers, sending the gesture data wirelessly to move the robotic arm and robot accordingly. The system is intended to help differently abled people perform tasks through hand gestures without physical contact.
servo motor control using arduino
This document describes a servo motor controlled robotic claw. It explains that servomotors allow for precise control of position, velocity, and acceleration through a closed-loop control system. Servomotors are used in robotics and automated manufacturing. The robotic arm uses servomotors at each joint to replicate the movement of a human arm, and it can be controlled through a computer interface to perform tasks like gripping and rotating parts. Arduino and pulse width modulation are used to control the servomotors. Examples of applications include robotic arms in automotive assembly lines and medical robotic arms for surgeries.
Flexible robotic hand
This presentation summarizes a project to design a robotic hand controlled by hand gestures. The project is led by a group of 5 students and aims to help the deaf community. The robotic hand will be controlled via a glove with flex sensors that detect hand gestures. The signals from the flex sensors are sent to an Arduino microcontroller and transmitted to the robotic hand via Xbee modules. The hand will be built using servo motors attached to a fiberglass structure to mimic finger and hand movements based on the detected gestures.
Obstacle Avoidance Robot Summer training Presentation
i did an extremely hard work on it. I believe that you all my friends will surely get the benefit of this presentation. As a student of B.tech I just wish to assist those who always ready to assist another one. thanks for reading......
Obstacle Detctor Robot
This document describes an obstacle avoiding robot with a vacuum cleaner. The robot uses IR sensors and transmitting circuits to detect obstacles and then decides to avoid them by turning left or right. It also includes a blower to suck up dust and particles, functioning as a vacuum cleaner. The circuit diagram and software used are included. Potential applications are discussed such as use in concealed paths, as a weight lifter, or in mines. The future scope could involve adding a camera for beyond line-of-sight driving or modifying it to function as a firefighting robot.
Robotic Hand
This robotic hand can be controlled by human hand gestures through a wired connection. Flex sensors on a glove record hand movements and send the data to an Arduino microcontroller via an encoder. The microcontroller controls servo motors in the robotic hand to mimic the movements of the human hand, allowing interactive control. While the system works responsively, the flex sensors and servo motors have limited lifetimes that require careful maintenance for continued operation.
Sunny manual - 1.1- Light Following Robot - Adama Robotics
Sunny is a light following robot designed by Adama Robotics. We have designed the manual for beginners who want to learn about Robotics.
For more information: https://www.adamarobotics.com
Sunny Kit contains:
- Arduino Uno
- LDR sensors
- Chassis
- DC Motors
- Breadboard (prototyping)
- Screws
- Wires
Recommended
Maze follower robot
The document describes how to build a maze follower robot using Arduino, IR sensors, and a motor driver. The robot uses 4 IR sensors - two to follow lines and two more to detect intersections and choose a path. It can identify straight paths, left turns, right turns, intersections, and dead ends. The robot follows a left-hand or right-hand wall tracking algorithm to navigate the maze and reverse direction when it reaches a dead end. Components include an Arduino, IR sensors, motor driver, battery, and wheels. The circuit is assembled on a breadboard and code is used to control motor direction and speed based on sensor input.
Gesture controlled robot with arm for phyically handicapped peoples
This document proposes the development of a wireless controlled robotic arm that can be operated through gestures detected by robotic gloves. The robotic arm system consists of a transmitter section integrated into the gloves with sensors, and a receiver section controlling the robotic arm and a robot. The gloves detect gestures through sensors like gyroscopes and accelerometers, sending the gesture data wirelessly to move the robotic arm and robot accordingly. The system is intended to help differently abled people perform tasks through hand gestures without physical contact.
servo motor control using arduino
This document describes a servo motor controlled robotic claw. It explains that servomotors allow for precise control of position, velocity, and acceleration through a closed-loop control system. Servomotors are used in robotics and automated manufacturing. The robotic arm uses servomotors at each joint to replicate the movement of a human arm, and it can be controlled through a computer interface to perform tasks like gripping and rotating parts. Arduino and pulse width modulation are used to control the servomotors. Examples of applications include robotic arms in automotive assembly lines and medical robotic arms for surgeries.
Flexible robotic hand
This presentation summarizes a project to design a robotic hand controlled by hand gestures. The project is led by a group of 5 students and aims to help the deaf community. The robotic hand will be controlled via a glove with flex sensors that detect hand gestures. The signals from the flex sensors are sent to an Arduino microcontroller and transmitted to the robotic hand via Xbee modules. The hand will be built using servo motors attached to a fiberglass structure to mimic finger and hand movements based on the detected gestures.
Obstacle Avoidance Robot Summer training Presentation
i did an extremely hard work on it. I believe that you all my friends will surely get the benefit of this presentation. As a student of B.tech I just wish to assist those who always ready to assist another one. thanks for reading......
Obstacle Detctor Robot
This document describes an obstacle avoiding robot with a vacuum cleaner. The robot uses IR sensors and transmitting circuits to detect obstacles and then decides to avoid them by turning left or right. It also includes a blower to suck up dust and particles, functioning as a vacuum cleaner. The circuit diagram and software used are included. Potential applications are discussed such as use in concealed paths, as a weight lifter, or in mines. The future scope could involve adding a camera for beyond line-of-sight driving or modifying it to function as a firefighting robot.
Robotic Hand
This robotic hand can be controlled by human hand gestures through a wired connection. Flex sensors on a glove record hand movements and send the data to an Arduino microcontroller via an encoder. The microcontroller controls servo motors in the robotic hand to mimic the movements of the human hand, allowing interactive control. While the system works responsively, the flex sensors and servo motors have limited lifetimes that require careful maintenance for continued operation.
Sunny manual - 1.1- Light Following Robot - Adama Robotics
Sunny is a light following robot designed by Adama Robotics. We have designed the manual for beginners who want to learn about Robotics.
For more information: https://www.adamarobotics.com
Sunny Kit contains:
- Arduino Uno
- LDR sensors
- Chassis
- DC Motors
- Breadboard (prototyping)
- Screws
- Wires
Newton manual-1.1- Line Follower Robot - Adama Robotics
This is the manual of our Line Follower Robot. This autonomous robot can follow a line.
For more information: https://www.adamarobotics.com
Newton Kit contains:
- Arduino Uno Microcontroller
- Chassis
- DC Motors
- IR sensors
- Wheels
- Breadboards
- Wires
- Motor Driver L293D Chip
- Battery
To get this kit: visit https://www.adamarobotics.com/shop
How to make_your_first_robot
This document provides step-by-step instructions for building a basic robot using inexpensive and readily available materials. It outlines the necessary materials, which include a PICAXE-28 project board, motors, batteries, and various connectors. The instructions then guide the reader through assembling the robot components, such as soldering pins to the board for connections, attaching wheels to motors, and inserting the microcontroller and driver chips. The overall process is described as very simple and aimed at getting readers building a functional robot within a few hours with no prior skills.
arduino
The document discusses open source hardware and the open source nature of projects from SparkFun and .:oomlout:. Open source means designs, guides, code, and 3D models are freely available to download, reproduce, modify, and distribute under a Creative Commons license as long as credit is given and developments are shared in a similar open manner. The goal is to make physical things as accessible and fun to learn with as open source software has been.
Make your own device with Script
The presentation in Bahir Dar University, Bahir Dar, Ethiopia.
About personal project of making a robot.
This version is including the script
Inserted Movie Clip :
An Introduction to the Arduino : http://youtu.be/CqrQmQqpHXc
Detect Train and Close Window with Arduino and Webcam :
http://youtu.be/aBhF_qfG4Qc
Drive 10 Servos with 2 Arduino Pins :
http://www.youtube.com/watch?v=FbyjNPC6SxI
Arduino XBee & PS2 Controller & Servo Motor Test :
http://youtu.be/BoXzik46LyI
Getting Started with Raspberry Pi and Arduino
This document provides an overview of the Arduino and Raspberry Pi microcontroller boards and development environments. It discusses the differences between the two boards, including that Arduino is a microcontroller and Raspberry Pi is a mini computer. Various starter kits for both boards are presented, along with example projects and resources for learning more. Electronic components, IDEs, and sample code for getting started are also reviewed.
Power supply learning kit for uno
This document provides instructions for using a power supply learning kit with an Arduino board. It begins with an introduction to Kuongshun, the company that produces the kit. It then lists and shows pictures of the various electronic components included in the kit. The document proceeds to provide lessons for 14 hands-on projects of increasing complexity that can be built with the kit, such as making an LED blink, adding a button, and using sensors. It concludes by encouraging users to share their projects online and contact Kuongshun with any questions.
Elegoo Super Starter Kit for UNO V1.0.2017.7.9.pdf
What the fuck did you just fucking say about me, you little bitch? I'll have you know I graduated top of my class in the Navy Seals, and I've been involved in numerous secret raids on Al-Quaeda, and I have over 300 confirmed kills. I am trained in gorilla warfare and I'm the top sniper in the entire US armed forces. You are nothing to me but just another target. I will wipe you the fuck out with precision the likes of which has never been seen before on this Earth, mark my fucking words. You think you can get away with saying that shit to me over the Internet? Think again, fucker. As we speak I am contacting my secret network of spies across the USA and your IP is being traced right now so you better prepare for the storm, maggot. The storm that wipes out the pathetic little thing you call your life. You're fucking dead, kid. I can be anywhere, anytime, and I can kill you in over seven hundred ways, and that's just with my bare hands. Not only am I extensively trained in unarmed combat, but I have access to the entire arsenal of the United States Marine Corps and I will use it to its full extent to wipe your miserable ass off the face of the continent, you little shit. If only you could have known what unholy retribution your little "clever" comment was about to bring down upon you, maybe you would have held your fucking tongue. But you couldn't, you didn't, and now you're paying the price, you goddamn idiot. I will shit fury all over you and you will drown in it. You're fucking dead, kiddo.
Esp8266 Arduino Projects List -Use Arduino for Projects.pdf
Most of the electronics geeks are asking the whole list of arduino and esp8266 projects PDF here we will share list every month as our projects are being updated on daily basis
Ardx eg-spar-web-rev10
Here are the key things to know about some common electronic components:
DC Motor:
- What it Does: Spins when a current is passed through its leads. It converts electrical energy to mechanical motion/rotation.
- No. of Leads: Typically has 2 leads - one positive and one negative. Current must flow through the motor in one direction for it to spin.
LED (Light Emitting Diode):
- What it Does: Emits light when current passes through it in the correct direction. Common colors are red, green, blue, yellow, white.
- No. of Leads: Has 2 leads, one longer than the other. The longer lead is positive and must be connected to
How to make your first robot report
This document provides instructions for building a basic robot in 2 hours for $85 using a PICAXE microcontroller board. The materials needed include geared motors, wheels, a servo, an infrared sensor, the PICAXE board, batteries, and various connectors. The instructions guide the reader through step-by-step assembly, including soldering pins to the board, connecting the motors and infrared sensor, and programming the microcontroller to control the robot's movement and sensing.
Advanced view arduino projects list use arduino for projects (2)
1. This document lists over 40 advanced Arduino projects including a third eye device for the blind, sending data from Arduino to Python via USB, reading a potentiometer with Arduino's analog input, an automated garden irrigation system, connecting things via Bluetooth and Android, and more.
2. The projects cover a wide range of applications including wearables, Internet of Things, home automation, robotics, sensors, and more. Many use additional hardware like sensors, Bluetooth/WiFi modules, and actuators to add advanced functionality.
3. The detailed descriptions provide instructions and code for replicating the projects, making them useful resources for learning and inspiration for new builds. Advanced techniques like machine learning, 3
Multifunctional Robot (PPT).pptx
In the last couple of decades, communication technology has developed by leaps and bounds. It has already established its importance in sharing the information right from household matters to worldwide phenomena. Apart from sharing information, it is also used for remote control of machines and electronic appliances. In our day-to-day life, we use many such appliances at home, office and public places for our comfort and convenience. Every device requires one or the other kind of operation control for which it has a HMI (human-machine interface).
Communication technology not only helps us to exchange information with human beings but also allows us to carry out monitoring and controlling of machines from remote locations. This remote control of appliances is possible with wired or wireless communication interfaces embedded in the machines. The use of โEmbedded System in Communicationโ has given rise to many interesting applications. One of such applications public addressing system (PAS). Many companies are manufacturing audio / video systems like public announcement system, CCTV, programmable sign boards etc. But all these systems are generally hard-wired, complex in nature and difficult to expand. So, by adding wireless communication interface such as GSM to these systems, we can overcome their limitations.
The Short Message Service (SMS) technology is one the most stable mobile technologies around. Most of our tertiary students carry mobile phones with SMS facilities and can be used for teaching and learning. There are many projects using SMS technologies in education as outlined in the literature survey, but many publications do not provide the possible underlying technologies to implement such as the teaching and learning systems. The system is capable of supporting administrative teaching and learning activities via the SMS technology.
How to Install an Ethernet Driver Without Internet Access.pdf
n the world of connectivity, one might wonder, "How can I install an Ethernet driver when I don't have internet access?" Fear not. We are here to guide you step by step through this crucial process.
The Importance of an Ethernet Driver
Think of an Ethernet driver as the translator between your computer and the big world of the internet. It's what lets your computer chat with other devices, sort of like how you need to know a language to chat with a friend from another country. Without this "translator," your computer wouldn't understand or be able to talk to the internet at all. It's like trying to play a multiplayer online game without being connected; you just can't join in on the fun! So, having an Ethernet driver is like having a golden ticket to a massive online party.
Getting Ready to Start
Hey there! Before we jump into the cool techy stuff, let's make sure we've got all our gear lined up. Here's what you're gonna need:
1. Your Main Device: This is the computer or laptop that's acting a bit tricky right now. It's probably having a hard time connecting to the internet because its Ethernet driver is acting up or just went missing. Imagine it's like a car without a radio; it can drive, but you can't jam to your favorite tunes.
2. Backup Device: Now, grab another gadget that's online. This could be your friend's laptop, your sibling's computer, or even a school computerโjust something that can browse the web. Think of it as calling in a buddy when your favorite game gets tough.
3. USB Magic Stick: Last but not least, you'll need a USB drive or some sort of external storage. It's like a backpack for your digital stuff. We're going to use it to carry the Ethernet driver from the backup device to your main device.
Your Step-by-Step Guide to Fixing the Internet Connection
Alright, champ! So, you're ready to get your computer back online, but it's missing this thing called an Ethernet driver. No stress! Let's break it down into easy steps so you can be the tech hero of the day.
Step 1: Finding Out What Your Computer Speaks
Your computer, just like every superhero, has its own unique identity. We need to figure out what kind of network gear it uses to connect to the internet. Here's how:
1. Venturing into the Device Kingdom: On your computer, there's this place called 'Device Manager'. Think of it as the backstage area where all the techy magic happens. To get there, just search for 'Device Manager' on your computer and open it up!
2. Finding the Network Crew: Inside the Device Manager, you'll see a bunch of categories. It's like scrolling through your game library but for computer parts. What you're looking for is a group labeled 'Network adapters'. Give that a click!
3. Spotting the Unique Tag: Now, under 'Network adapters', you'll see some names pop up. This is your computer's way of telling you the type and model of its network gear. Alright, now that you've got the name and model of your computer's network gear,Here's how you
Pic programming gettingstarted
The document provides instructions for programming a UAV DevBoard using a PIC microcontroller. It outlines the necessary equipment including an ICD2 programmer, MPLAB IDE software, and MPLAB C compiler. It describes downloading and installing the software, connecting the ICD2, opening a project in MPLAB IDE, programming the board, and common errors that may occur. The process involves installing software, connecting hardware, selecting options in MPLAB IDE, building and programming a project, and debugging firmware.
Advanced View Arduino Projects List - Use Arduino for Projects-2.pdf
Here we will share list every month as our projects are being updated on daily basis. PDF is a good source to work offline.
@Roboterra: Your First Robotics Manual
The document provides an overview of the ROBOTERRA robotics education system. It outlines the four main steps to build a robot: 1) think of the robot design and choose components, 2) program and debug the robot, 3) build the robot skeleton and calibrate, 4) connect the hardware and software. It promotes an oath of excellence for robotics enthusiasts and emphasizes creativity, ingenuity and collaboration. The overall goal is to put robotics education in students' hands and drive innovation in STEM fields.
Advanced View Arduino Projects List - Use Arduino for Projects-5.pdf
Here we will share list every month as our projects are being updated on daily basis. PDF is a good source to work offline. Most of the electronics geeks are asking the whole list of arduino projects PDF
Houdini MC - UNO-ethernet Shield
This document provides instructions for building an Arduino-based interface to control Houdini MC using buttons connected to an Arduino Uno board. It recommends specific hardware components and includes the code used. The author discloses that they are not an expert coder and provides the code for reference purposes only. Readers are advised to test the build on a breadboard first before implementing in a real-world installation.
Arduino_Project_Report
This document summarizes a college project to build an Arduino-based robot that can track and follow an infrared LED. The robot uses an array of 8 infrared sensors connected to an Arduino Uno microcontroller. The Arduino processes the sensor data and controls two continuous rotation servomotors that drive the wheels. Testing showed the robot could track the infrared LED from up to 14 meters away. Issues with sensor field of view and reflective surfaces hindered tracking at close ranges. Adding distance sensors was proposed to help with navigation if the infrared signal is lost. The overall goal of building a robot capable of infrared tracking and following was accomplished.
Indigo 6 quick start guide
This quick start guide summarizes how to get started with the Indigo 6 home automation server. It outlines installing the Indigo software on a Mac, starting the Indigo server, connecting Z-Wave, INSTEON and X10 interfaces, enabling plugins, and adding devices. The guide recommends reading the full documentation on the company's website for additional details on setting up and using Indigo 6 to control home automation technologies and integrate a variety of devices.
Introduction to VR ebook- Dream School.pdf
Introduction to VR ebook- Dream School
Virtual Reality (VR) is a rapidly growing technology that offers a new way of experiencing the world and beyond. Whether you're interested in gaming, education, or exploring new environments, VR provides an immersive and interactive experience that is unlike anything you've seen before.
Are you looking for a home in Dhaka?.pdf
This document advertises homes for sale in different areas of Bangladesh such as West Dhanmondi, Shere-Bangla Road, Zigatola, and Fakirapool. It encourages readers to visit locations now or contact the company by phone or website to find their dream house.
More Related Content
Similar to Skippy manual -1.1 Adama Robotics - Obstacle Avoidance Robot
Newton manual-1.1- Line Follower Robot - Adama Robotics
This is the manual of our Line Follower Robot. This autonomous robot can follow a line.
For more information: https://www.adamarobotics.com
Newton Kit contains:
- Arduino Uno Microcontroller
- Chassis
- DC Motors
- IR sensors
- Wheels
- Breadboards
- Wires
- Motor Driver L293D Chip
- Battery
To get this kit: visit https://www.adamarobotics.com/shop
How to make_your_first_robot
This document provides step-by-step instructions for building a basic robot using inexpensive and readily available materials. It outlines the necessary materials, which include a PICAXE-28 project board, motors, batteries, and various connectors. The instructions then guide the reader through assembling the robot components, such as soldering pins to the board for connections, attaching wheels to motors, and inserting the microcontroller and driver chips. The overall process is described as very simple and aimed at getting readers building a functional robot within a few hours with no prior skills.
arduino
The document discusses open source hardware and the open source nature of projects from SparkFun and .:oomlout:. Open source means designs, guides, code, and 3D models are freely available to download, reproduce, modify, and distribute under a Creative Commons license as long as credit is given and developments are shared in a similar open manner. The goal is to make physical things as accessible and fun to learn with as open source software has been.
Make your own device with Script
The presentation in Bahir Dar University, Bahir Dar, Ethiopia.
About personal project of making a robot.
This version is including the script
Inserted Movie Clip :
An Introduction to the Arduino : http://youtu.be/CqrQmQqpHXc
Detect Train and Close Window with Arduino and Webcam :
http://youtu.be/aBhF_qfG4Qc
Drive 10 Servos with 2 Arduino Pins :
http://www.youtube.com/watch?v=FbyjNPC6SxI
Arduino XBee & PS2 Controller & Servo Motor Test :
http://youtu.be/BoXzik46LyI
Getting Started with Raspberry Pi and Arduino
This document provides an overview of the Arduino and Raspberry Pi microcontroller boards and development environments. It discusses the differences between the two boards, including that Arduino is a microcontroller and Raspberry Pi is a mini computer. Various starter kits for both boards are presented, along with example projects and resources for learning more. Electronic components, IDEs, and sample code for getting started are also reviewed.
Power supply learning kit for uno
This document provides instructions for using a power supply learning kit with an Arduino board. It begins with an introduction to Kuongshun, the company that produces the kit. It then lists and shows pictures of the various electronic components included in the kit. The document proceeds to provide lessons for 14 hands-on projects of increasing complexity that can be built with the kit, such as making an LED blink, adding a button, and using sensors. It concludes by encouraging users to share their projects online and contact Kuongshun with any questions.
Elegoo Super Starter Kit for UNO V1.0.2017.7.9.pdf
What the fuck did you just fucking say about me, you little bitch? I'll have you know I graduated top of my class in the Navy Seals, and I've been involved in numerous secret raids on Al-Quaeda, and I have over 300 confirmed kills. I am trained in gorilla warfare and I'm the top sniper in the entire US armed forces. You are nothing to me but just another target. I will wipe you the fuck out with precision the likes of which has never been seen before on this Earth, mark my fucking words. You think you can get away with saying that shit to me over the Internet? Think again, fucker. As we speak I am contacting my secret network of spies across the USA and your IP is being traced right now so you better prepare for the storm, maggot. The storm that wipes out the pathetic little thing you call your life. You're fucking dead, kid. I can be anywhere, anytime, and I can kill you in over seven hundred ways, and that's just with my bare hands. Not only am I extensively trained in unarmed combat, but I have access to the entire arsenal of the United States Marine Corps and I will use it to its full extent to wipe your miserable ass off the face of the continent, you little shit. If only you could have known what unholy retribution your little "clever" comment was about to bring down upon you, maybe you would have held your fucking tongue. But you couldn't, you didn't, and now you're paying the price, you goddamn idiot. I will shit fury all over you and you will drown in it. You're fucking dead, kiddo.
Esp8266 Arduino Projects List -Use Arduino for Projects.pdf
Most of the electronics geeks are asking the whole list of arduino and esp8266 projects PDF here we will share list every month as our projects are being updated on daily basis
Ardx eg-spar-web-rev10
Here are the key things to know about some common electronic components:
DC Motor:
- What it Does: Spins when a current is passed through its leads. It converts electrical energy to mechanical motion/rotation.
- No. of Leads: Typically has 2 leads - one positive and one negative. Current must flow through the motor in one direction for it to spin.
LED (Light Emitting Diode):
- What it Does: Emits light when current passes through it in the correct direction. Common colors are red, green, blue, yellow, white.
- No. of Leads: Has 2 leads, one longer than the other. The longer lead is positive and must be connected to
How to make your first robot report
This document provides instructions for building a basic robot in 2 hours for $85 using a PICAXE microcontroller board. The materials needed include geared motors, wheels, a servo, an infrared sensor, the PICAXE board, batteries, and various connectors. The instructions guide the reader through step-by-step assembly, including soldering pins to the board, connecting the motors and infrared sensor, and programming the microcontroller to control the robot's movement and sensing.
Advanced view arduino projects list use arduino for projects (2)
1. This document lists over 40 advanced Arduino projects including a third eye device for the blind, sending data from Arduino to Python via USB, reading a potentiometer with Arduino's analog input, an automated garden irrigation system, connecting things via Bluetooth and Android, and more.
2. The projects cover a wide range of applications including wearables, Internet of Things, home automation, robotics, sensors, and more. Many use additional hardware like sensors, Bluetooth/WiFi modules, and actuators to add advanced functionality.
3. The detailed descriptions provide instructions and code for replicating the projects, making them useful resources for learning and inspiration for new builds. Advanced techniques like machine learning, 3
Multifunctional Robot (PPT).pptx
In the last couple of decades, communication technology has developed by leaps and bounds. It has already established its importance in sharing the information right from household matters to worldwide phenomena. Apart from sharing information, it is also used for remote control of machines and electronic appliances. In our day-to-day life, we use many such appliances at home, office and public places for our comfort and convenience. Every device requires one or the other kind of operation control for which it has a HMI (human-machine interface).
Communication technology not only helps us to exchange information with human beings but also allows us to carry out monitoring and controlling of machines from remote locations. This remote control of appliances is possible with wired or wireless communication interfaces embedded in the machines. The use of โEmbedded System in Communicationโ has given rise to many interesting applications. One of such applications public addressing system (PAS). Many companies are manufacturing audio / video systems like public announcement system, CCTV, programmable sign boards etc. But all these systems are generally hard-wired, complex in nature and difficult to expand. So, by adding wireless communication interface such as GSM to these systems, we can overcome their limitations.
The Short Message Service (SMS) technology is one the most stable mobile technologies around. Most of our tertiary students carry mobile phones with SMS facilities and can be used for teaching and learning. There are many projects using SMS technologies in education as outlined in the literature survey, but many publications do not provide the possible underlying technologies to implement such as the teaching and learning systems. The system is capable of supporting administrative teaching and learning activities via the SMS technology.
How to Install an Ethernet Driver Without Internet Access.pdf
n the world of connectivity, one might wonder, "How can I install an Ethernet driver when I don't have internet access?" Fear not. We are here to guide you step by step through this crucial process.
The Importance of an Ethernet Driver
Think of an Ethernet driver as the translator between your computer and the big world of the internet. It's what lets your computer chat with other devices, sort of like how you need to know a language to chat with a friend from another country. Without this "translator," your computer wouldn't understand or be able to talk to the internet at all. It's like trying to play a multiplayer online game without being connected; you just can't join in on the fun! So, having an Ethernet driver is like having a golden ticket to a massive online party.
Getting Ready to Start
Hey there! Before we jump into the cool techy stuff, let's make sure we've got all our gear lined up. Here's what you're gonna need:
1. Your Main Device: This is the computer or laptop that's acting a bit tricky right now. It's probably having a hard time connecting to the internet because its Ethernet driver is acting up or just went missing. Imagine it's like a car without a radio; it can drive, but you can't jam to your favorite tunes.
2. Backup Device: Now, grab another gadget that's online. This could be your friend's laptop, your sibling's computer, or even a school computerโjust something that can browse the web. Think of it as calling in a buddy when your favorite game gets tough.
3. USB Magic Stick: Last but not least, you'll need a USB drive or some sort of external storage. It's like a backpack for your digital stuff. We're going to use it to carry the Ethernet driver from the backup device to your main device.
Your Step-by-Step Guide to Fixing the Internet Connection
Alright, champ! So, you're ready to get your computer back online, but it's missing this thing called an Ethernet driver. No stress! Let's break it down into easy steps so you can be the tech hero of the day.
Step 1: Finding Out What Your Computer Speaks
Your computer, just like every superhero, has its own unique identity. We need to figure out what kind of network gear it uses to connect to the internet. Here's how:
1. Venturing into the Device Kingdom: On your computer, there's this place called 'Device Manager'. Think of it as the backstage area where all the techy magic happens. To get there, just search for 'Device Manager' on your computer and open it up!
2. Finding the Network Crew: Inside the Device Manager, you'll see a bunch of categories. It's like scrolling through your game library but for computer parts. What you're looking for is a group labeled 'Network adapters'. Give that a click!
3. Spotting the Unique Tag: Now, under 'Network adapters', you'll see some names pop up. This is your computer's way of telling you the type and model of its network gear. Alright, now that you've got the name and model of your computer's network gear,Here's how you
Pic programming gettingstarted
The document provides instructions for programming a UAV DevBoard using a PIC microcontroller. It outlines the necessary equipment including an ICD2 programmer, MPLAB IDE software, and MPLAB C compiler. It describes downloading and installing the software, connecting the ICD2, opening a project in MPLAB IDE, programming the board, and common errors that may occur. The process involves installing software, connecting hardware, selecting options in MPLAB IDE, building and programming a project, and debugging firmware.
Advanced View Arduino Projects List - Use Arduino for Projects-2.pdf
Here we will share list every month as our projects are being updated on daily basis. PDF is a good source to work offline.
@Roboterra: Your First Robotics Manual
The document provides an overview of the ROBOTERRA robotics education system. It outlines the four main steps to build a robot: 1) think of the robot design and choose components, 2) program and debug the robot, 3) build the robot skeleton and calibrate, 4) connect the hardware and software. It promotes an oath of excellence for robotics enthusiasts and emphasizes creativity, ingenuity and collaboration. The overall goal is to put robotics education in students' hands and drive innovation in STEM fields.
Advanced View Arduino Projects List - Use Arduino for Projects-5.pdf
Here we will share list every month as our projects are being updated on daily basis. PDF is a good source to work offline. Most of the electronics geeks are asking the whole list of arduino projects PDF
Houdini MC - UNO-ethernet Shield
This document provides instructions for building an Arduino-based interface to control Houdini MC using buttons connected to an Arduino Uno board. It recommends specific hardware components and includes the code used. The author discloses that they are not an expert coder and provides the code for reference purposes only. Readers are advised to test the build on a breadboard first before implementing in a real-world installation.
Arduino_Project_Report
This document summarizes a college project to build an Arduino-based robot that can track and follow an infrared LED. The robot uses an array of 8 infrared sensors connected to an Arduino Uno microcontroller. The Arduino processes the sensor data and controls two continuous rotation servomotors that drive the wheels. Testing showed the robot could track the infrared LED from up to 14 meters away. Issues with sensor field of view and reflective surfaces hindered tracking at close ranges. Adding distance sensors was proposed to help with navigation if the infrared signal is lost. The overall goal of building a robot capable of infrared tracking and following was accomplished.
Indigo 6 quick start guide
This quick start guide summarizes how to get started with the Indigo 6 home automation server. It outlines installing the Indigo software on a Mac, starting the Indigo server, connecting Z-Wave, INSTEON and X10 interfaces, enabling plugins, and adding devices. The guide recommends reading the full documentation on the company's website for additional details on setting up and using Indigo 6 to control home automation technologies and integrate a variety of devices.
Similar to Skippy manual -1.1 Adama Robotics - Obstacle Avoidance Robot (20)
Newton manual-1.1- Line Follower Robot - Adama Robotics
Newton manual-1.1- Line Follower Robot - Adama Robotics
ย
Elegoo Super Starter Kit for UNO V1.0.2017.7.9.pdf
Elegoo Super Starter Kit for UNO V1.0.2017.7.9.pdf
ย
Esp8266 Arduino Projects List -Use Arduino for Projects.pdf
Esp8266 Arduino Projects List -Use Arduino for Projects.pdf
ย
Advanced view arduino projects list use arduino for projects (2)
Advanced view arduino projects list use arduino for projects (2)
ย
How to Install an Ethernet Driver Without Internet Access.pdf
How to Install an Ethernet Driver Without Internet Access.pdf
ย
Advanced View Arduino Projects List - Use Arduino for Projects-2.pdf
Advanced View Arduino Projects List - Use Arduino for Projects-2.pdf
ย
Advanced View Arduino Projects List - Use Arduino for Projects-5.pdf
Advanced View Arduino Projects List - Use Arduino for Projects-5.pdf
ย
More from Mahadi Hasan
Introduction to VR ebook- Dream School.pdf
Introduction to VR ebook- Dream School
Virtual Reality (VR) is a rapidly growing technology that offers a new way of experiencing the world and beyond. Whether you're interested in gaming, education, or exploring new environments, VR provides an immersive and interactive experience that is unlike anything you've seen before.
Are you looking for a home in Dhaka?.pdf
This document advertises homes for sale in different areas of Bangladesh such as West Dhanmondi, Shere-Bangla Road, Zigatola, and Fakirapool. It encourages readers to visit locations now or contact the company by phone or website to find their dream house.
real estate market 2022 - dw prop.pdf
In this PDF you will get an idea about the highlights of the Real Estate Market of Bangladesh in 2022.
Robotics Starter Guide - Dream School
Robotics Starter Guide - Dream School
Here you will get an overview of the field of Robotics.
What is Robotics? Fundamentals of Robotics, Application of Robotics. What is Machine Learning? What is Artificial Intelligence? What is Computer Vision and more.
This is a very basic starter guide to give you an understanding of the field. If you want to learn more in-depth, please visit www.dreamschool.xyz
Top 10 qualities for Entrepreneurs | Get these to become Unstoppable | Achiev...
The document discusses the importance of being persistent and taking massive action to achieve goals. It recommends persistence and massive action as keys to success and thanks the viewer for watching, inviting them to seek more information.
Top reasons for product failure
This document lists the top 14 reasons for product failure: 1) Not introducing anything new or making improvements, 2) Having an inadequate budget, 3) Poor market research, 4) Lack of management support, 5) Not involving customers, 6) Government decisions, 7) Having a market that is too small, 8) Having a poor match with a company's capabilities, 9) Inadequate support from distribution channels, 10) Being late to market, 11) Internal organizational problems, 12) Competitors being better and faster, 13) Poor return on investment, and 14) Changes in consumer tastes and trends.
AGM and Movie night
The document announces an AGM and movie night for the QM AI & Robotics Society. It discusses how the society got started due to members' interest in AI and a desire to share knowledge. Last year, the society held meet and greets, lectures, workshops on Arduino and a trip to Bletchley Park. This year, plans include a swarm robots project, more workshops and competitions as well as social events like movie nights. The document thanks all members for their efforts over the past year.
More from Mahadi Hasan (7)
Top 10 qualities for Entrepreneurs | Get these to become Unstoppable | Achiev...
Top 10 qualities for Entrepreneurs | Get these to become Unstoppable | Achiev...
ย
Recently uploaded
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(๐๐๐ ๐๐๐) (๐๐๐ฌ๐ฌ๐จ๐ง ๐)-๐๐ซ๐๐ฅ๐ข๐ฆ๐ฌ
๐๐ข๐ฌ๐๐ฎ๐ฌ๐ฌ ๐ญ๐ก๐ ๐๐๐ ๐๐ฎ๐ซ๐ซ๐ข๐๐ฎ๐ฅ๐ฎ๐ฆ ๐ข๐ง ๐ญ๐ก๐ ๐๐ก๐ข๐ฅ๐ข๐ฉ๐ฉ๐ข๐ง๐๐ฌ:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
๐๐ฑ๐ฉ๐ฅ๐๐ข๐ง ๐ญ๐ก๐ ๐๐๐ญ๐ฎ๐ซ๐ ๐๐ง๐ ๐๐๐จ๐ฉ๐ ๐จ๐ ๐๐ง ๐๐ง๐ญ๐ซ๐๐ฉ๐ซ๐๐ง๐๐ฎ๐ซ:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
BรI TแบฌP Bแป TRแปข TIแบพNG ANH LแปP 9 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2024-2025 - ...
BรI TแบฌP Bแป TRแปข TIแบพNG ANH LแปP 9 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneย
BรI TแบฌP Bแป TRแปข TIแบพNG ANH LแปP 8 - Cแบข NฤM - FRIENDS PLUS - NฤM HแปC 2023-2024 (B...
BรI TแบฌP Bแป TRแปข TIแบพNG ANH LแปP 8 - Cแบข NฤM - FRIENDS PLUS - NฤM HแปC 2023-2024 (B...Nguyen Thanh Tu Collection
https://app.box.com/s/nrwz52lilmrw6m5kqeqn83q6vbdp8yzpย
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
CHUYรN ฤแป รN TแบฌP Vร PHรT TRIแปN CรU HแปI TRONG ฤแป MINH HแปA THI TแปT NGHIแปP THPT ...
CHUYรN ฤแป รN TแบฌP Vร PHรT TRIแปN CรU HแปI TRONG ฤแป MINH HแปA THI TแปT NGHIแปP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfย
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as discipline
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!ย
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdfุณู
ูุฑ ุจุณูููู
ู
ุตุญู ุฃุญุฑู ุงูุฎูุงู ูููุฑุงุก ุงูุนุดุฑุฉุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุจุงูุชูููู ูุตูุง ุณู
ูุฑ ุจุณูููู ุบูุฑ ุงููู ููย
Benner "Expanding Pathways to Publishing Careers"
Benner "Expanding Pathways to Publishing Careers"National Information Standards Organization (NISO)
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.ย
How to Manage Reception Report in Odoo 17
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
Recently uploaded (20)
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
ย
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
ย
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
ย
BรI TแบฌP Bแป TRแปข TIแบพNG ANH LแปP 9 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2024-2025 - ...
BรI TแบฌP Bแป TRแปข TIแบพNG ANH LแปP 9 Cแบข NฤM - GLOBAL SUCCESS - NฤM HแปC 2024-2025 - ...
ย
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
ย
BรI TแบฌP Bแป TRแปข TIแบพNG ANH LแปP 8 - Cแบข NฤM - FRIENDS PLUS - NฤM HแปC 2023-2024 (B...
BรI TแบฌP Bแป TRแปข TIแบพNG ANH LแปP 8 - Cแบข NฤM - FRIENDS PLUS - NฤM HแปC 2023-2024 (B...
ย
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
ย
CHUYรN ฤแป รN TแบฌP Vร PHรT TRIแปN CรU HแปI TRONG ฤแป MINH HแปA THI TแปT NGHIแปP THPT ...
CHUYรN ฤแป รN TแบฌP Vร PHรT TRIแปN CรU HแปI TRONG ฤแป MINH HแปA THI TแปT NGHIแปP THPT ...
ย
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
ย
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
ย
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
ย
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
ย
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ย
Skippy manual -1.1 Adama Robotics - Obstacle Avoidance Robot
- 2. Iโm here to guide you to make your first robot! 2
- 3. 3
- 5. This is your robot's eyes Itโs small and cute 5
- 6. Itโs tiny and powerful! This is your robot's brain 6
- 7. This is your robot's chest! Itโs called a breadboard 7
- 8. These are your robotโs legs A motor and a wheel 8
- 9. Brain would have to be connected using Jumper Wires 9
- 10. The legs will have to be connected with the brain Brain is going to send signal to move around 10
- 11. Letโs give the brain some instructions so that it can work. 11
- 12. You can download the program from here. But for that we will have to download the Arduino IDE. 12
- 13. After downloading, Open the Arduino IDE. Then you can type the code in by yourself; or you can download it from our website. www.adamarobotics.com/skippy-code More instructions are given there. 13
- 14. Now we can connect the components together. On the next page, there is a Schematics which will show you how to connect the components. 14
- 15. Connect your components according to the Schematics below. 15
- 16. Donโt be afraid! Start with the first one! And slowly you will get the hang of it. Try to connect like the Schematics. 16
- 17. Play with your new friend Skipp-E ! 17
Editor's Notes
- Change the font