Caterpillar cat 416 d backhoe loader (prefix cxp) service repair manual (cxp0...ujjfjkskekmme
This document provides instructions for removing, disassembling, assembling, and installing solenoid valves for the transmission of a Caterpillar 416D backhoe loader. The instructions cover removing floorplates, disconnecting wiring, and removing solenoid valves. Disassembly involves removing nuts, covers, seals, and solenoids. Assembly requires cleaning parts and replacing seals before reinstalling components. Safety notices warn of potential injuries from hydraulic pressure and recommend proper fluid handling and disposal.
This document provides a summary of simulation results for a MOSFET device model. It includes:
1) A SPICE model for the MTM23223 power MOSFET including parameters for the MOSFET, body diode, and ESD protection diodes.
2) Simulation results graphs for transconductance, Vgs-Id characteristics, Rds(on), gate charge, capacitance characteristics, switching time, output characteristics, and reverse recovery that compare measurements to simulations.
3) Evaluation circuits used in the simulations and tables comparing measurement and simulation results.
This document contains a SPICE model for the Cree CSD01060A silicon carbide schottky diode, including:
- A SPICE subcircuit model for the diode.
- Descriptions of the model parameters like saturation current, emission coefficient, and breakdown voltage.
- Simulation results showing the diode's forward and reverse I-V characteristics and junction capacitance, along with comparisons to manufacturer measurements.
2SK4017 (Standard Model) PSpice Model (Free SPICE Model)Tsuyoshi Horigome
This document provides a SPICE model for the TOSHIBA 2SK4017 MOSFET. It includes:
1. Model parameters for the MOSFET and its internal body diode.
2. Simulation results that match measurements of the MOSFET's electrical characteristics like transconductance, drain current, and switching times.
3. Circuit simulations validating the model, including the forward and reverse characteristics of the internal body diode.
Free SPICE Model of 1SR139-400 , TC=25degree in SPICE PARKTsuyoshi Horigome
FREE SPICE MODEL of 1SR139-400 , TC=25degree in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
Cataloge ge 2.industrial components_dienhathe.com-1_record_plusDien Ha The
The document discusses GE's Record Plus line of molded case circuit breakers. It provides an overview of the breakers, including their technical specifications and performance figures. It also lists relevant safety standards and certifications. The summary highlights the breakers' selective and current limiting protection capabilities, interchangeable trip units for flexible protection, common accessories, and versatile installation options.
2SK4017 (Professional Model) PSpice Model (Free SPICE Model)Tsuyoshi Horigome
This document provides a device modeling report for a TOSHIBA 2SK4017 MOSFET. It includes the SPICE model, equivalent circuit diagrams, simulation results comparing measurements and simulations, and characterization of key parameters like transconductance, drain current, switching time, and more. The body diode and ESD protection diode models are also included.
Caterpillar cat 416 d backhoe loader (prefix cxp) service repair manual (cxp0...ujjfjkskekmme
This document provides instructions for removing, disassembling, assembling, and installing solenoid valves for the transmission of a Caterpillar 416D backhoe loader. The instructions cover removing floorplates, disconnecting wiring, and removing solenoid valves. Disassembly involves removing nuts, covers, seals, and solenoids. Assembly requires cleaning parts and replacing seals before reinstalling components. Safety notices warn of potential injuries from hydraulic pressure and recommend proper fluid handling and disposal.
This document provides a summary of simulation results for a MOSFET device model. It includes:
1) A SPICE model for the MTM23223 power MOSFET including parameters for the MOSFET, body diode, and ESD protection diodes.
2) Simulation results graphs for transconductance, Vgs-Id characteristics, Rds(on), gate charge, capacitance characteristics, switching time, output characteristics, and reverse recovery that compare measurements to simulations.
3) Evaluation circuits used in the simulations and tables comparing measurement and simulation results.
This document contains a SPICE model for the Cree CSD01060A silicon carbide schottky diode, including:
- A SPICE subcircuit model for the diode.
- Descriptions of the model parameters like saturation current, emission coefficient, and breakdown voltage.
- Simulation results showing the diode's forward and reverse I-V characteristics and junction capacitance, along with comparisons to manufacturer measurements.
2SK4017 (Standard Model) PSpice Model (Free SPICE Model)Tsuyoshi Horigome
This document provides a SPICE model for the TOSHIBA 2SK4017 MOSFET. It includes:
1. Model parameters for the MOSFET and its internal body diode.
2. Simulation results that match measurements of the MOSFET's electrical characteristics like transconductance, drain current, and switching times.
3. Circuit simulations validating the model, including the forward and reverse characteristics of the internal body diode.
Free SPICE Model of 1SR139-400 , TC=25degree in SPICE PARKTsuyoshi Horigome
FREE SPICE MODEL of 1SR139-400 , TC=25degree in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
Cataloge ge 2.industrial components_dienhathe.com-1_record_plusDien Ha The
The document discusses GE's Record Plus line of molded case circuit breakers. It provides an overview of the breakers, including their technical specifications and performance figures. It also lists relevant safety standards and certifications. The summary highlights the breakers' selective and current limiting protection capabilities, interchangeable trip units for flexible protection, common accessories, and versatile installation options.
2SK4017 (Professional Model) PSpice Model (Free SPICE Model)Tsuyoshi Horigome
This document provides a device modeling report for a TOSHIBA 2SK4017 MOSFET. It includes the SPICE model, equivalent circuit diagrams, simulation results comparing measurements and simulations, and characterization of key parameters like transconductance, drain current, switching time, and more. The body diode and ESD protection diode models are also included.
Bảng giá thiết bị đóng cắt Mitsubishi ElectricBeeteco
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
SPICE MODEL of SCT2080KE (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SCT2080KE (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of SCH2080KE (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SCH2080KE (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of SCH2080KE (Professional+BDP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SCH2080KE (Professional+BDP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SSM3K15AMFV (Standard Model) PSpice Model (Free SPICE Model)Tsuyoshi Horigome
This document provides a Spice model and characterization results for the MOSFET device SSM3K15AMFV manufactured by Toshiba. It includes:
1) A Spice model for the MOSFET and its internal body diode with parameters.
2) Simulation results characterizing the MOSFET's transconductance, Id-Vgs, Rds(on), output characteristics, and more.
3) Comparisons of the simulation results to manufacturer measurements showing good agreement.
4) Characterization of the internal body diode's forward and reverse recovery behavior.
SSM3K15AMFV (professional Model) PSpice Model (Free SPICE Model)Tsuyoshi Horigome
This document provides a device modeling report for a MOSFET (SSM3K15AMFV) manufactured by Toshiba. It includes the SPICE model parameters for the MOSFET and its internal body diode. Simulation results show characteristics such as transconductance, output curves, gate charge, switching times and reverse recovery matching measurements. The report also details the SPICE subcircuit models used to simulate the MOSFET and diode.
This document appears to be a catalog for welding equipment from Cebora, listing various welding machines, plasma cutters, spot welders, and accessories. The document includes specifications for the different products in both text and table formats, and provides images and diagrams. Key products mentioned include MIG-MAG welding machines, plasma cutting power sources, and capacitor discharge spot welders.
This document provides information about semiconductor components in Spice Park's inventory in September 2017. It shows that semiconductors made up 75% of the total inventory of 4,749 pieces. The document includes a breakdown of the 391 diode/general purpose rectifier components in inventory, listing the manufacturer, part number, model, type, thermal rating, and date the information was last updated for each part number.
SPICE MODEL of TPC8115 (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
This document provides a summary of SPICE model parameters and simulation results for the power MOSFET and body diode components in the TPC8115 device from Toshiba. The model parameters, evaluation circuits, and comparison of measurement and simulation results are given for key electrical characteristics including transconductance, drain current, gate charge, switching time, and reverse recovery. Simulation results show good agreement with measurements for various operating conditions of the MOSFET and diode components in the device.
This document provides a device modeling report for a general purpose rectifier diode with part number 5GLZ47A manufactured by Toshiba. It includes the SPICE model parameters for the diode, simulation results comparing the forward voltage and capacitance characteristics to measurements, and an evaluation of the reverse recovery characteristic.
Used Semiconductor Equipment List :Please email us to check the availability of the items listed in the table. They are subject to prior sale without notic. Appreciate your time!
VECTOR DUTY MOTORS TENV -
Three Phase - Foot Mount - Double C-Face
Designed specifically for inverter operation for applications
requiring 1000:1 constant torque turndown ratio.
* Class F insulation (Impregnation Resin and Magnet wire are class H)
* NEMA design B.
* F1 Mounted (F2 convertible).
* Stainless Steel Nameplate - Laser etched with high contrast background
* Gasketed conduit box
* Class I, Div. 2, Groups A, B, C & D – T3, Class II, Div 2, Groups F & G – T3C
Inverter Rated:
1000 : 1 for constant torque
Features that make a difference:
* Constant torque operation from 0 to base speed (1000:1) on
PWM Vector Drive
* Constant Horsepower operation up to 150% base speed
* Ready for encoder mount
* With thermostats (1 per phase)
* Special nameplate data for easy drive set-up
* Ready for C-face brake, limited to 10 lb-ft braking torque
The document contains a list of 309 items with their respective categories, models, and manufacturers. It includes various semiconductor fabrication equipment such as CVD tools from AMAT and ASM, etch tools from AMAT, metrology tools from KLA and Hitachi, wire bonders from KNS, and more. The list provides information on the types and models of equipment available from the company located in Asia with the website www.semistarcorp.com.
EL-G-01-002-R5 MEDIUM AND LOW POWER DITRIBUTIONS AT PT IFISarif Hidayat
This document is a panel diagram for a medium and low voltage system. It shows the electrical connections between various components including generators, transformers, switchgear, capacitor banks, motors, and cables. There are multiple transformers, switchgear, motor control centers and other electrical equipment connected through cables to distribute power throughout the facility.
Lam Research ,Novellus, Gasonics, Tel ,Tokyo Electron Ltd, Matrix etc. Spare ...Emily Tan
Lam Research Novellus Gasonics Tel Tokyo Electron Ltd Matrix etc. Spare Parts:The items are subject to prior sale without notice. These items are only for end users.
This document provides information on Littelfuse 372 Series radial lead time-lag fuses, including:
- Electrical characteristics such as current ratings, voltage drop, breaking capacity and time-lag curves
- Approvals from certification agencies
- Materials and operating parameters
- Recommended soldering process parameters
- Dimensions and tolerances
- Part numbering system and available packaging options
Semiconductor equipment parts in stock-SSe-0141Emily Tan
This document lists 106 pieces of used semiconductor manufacturing equipment for sale including reflow ovens, screen printers, pick and place machines, feeders, conveyors, inspection equipment, and more. The equipment ranges from 1999 to 2017 and is from manufacturers such as MyData, Universal Instruments, JOT, Electro Design, and more. Potential buyers should contact the seller to check availability and pricing of the pre-owned equipment.
(https://www.wadbros.net/) Established in the year 2007, Wadbros Imports & Exports, are an eminent manufacturer and wholesaler of the wide variety of Ventilation Fan, Exhaust Fan, etc.
Bảng giá thiết bị đóng cắt Mitsubishi ElectricBeeteco
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
SPICE MODEL of SCT2080KE (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SCT2080KE (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of SCH2080KE (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SCH2080KE (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SPICE MODEL of SCH2080KE (Professional+BDP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of SCH2080KE (Professional+BDP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
SSM3K15AMFV (Standard Model) PSpice Model (Free SPICE Model)Tsuyoshi Horigome
This document provides a Spice model and characterization results for the MOSFET device SSM3K15AMFV manufactured by Toshiba. It includes:
1) A Spice model for the MOSFET and its internal body diode with parameters.
2) Simulation results characterizing the MOSFET's transconductance, Id-Vgs, Rds(on), output characteristics, and more.
3) Comparisons of the simulation results to manufacturer measurements showing good agreement.
4) Characterization of the internal body diode's forward and reverse recovery behavior.
SSM3K15AMFV (professional Model) PSpice Model (Free SPICE Model)Tsuyoshi Horigome
This document provides a device modeling report for a MOSFET (SSM3K15AMFV) manufactured by Toshiba. It includes the SPICE model parameters for the MOSFET and its internal body diode. Simulation results show characteristics such as transconductance, output curves, gate charge, switching times and reverse recovery matching measurements. The report also details the SPICE subcircuit models used to simulate the MOSFET and diode.
This document appears to be a catalog for welding equipment from Cebora, listing various welding machines, plasma cutters, spot welders, and accessories. The document includes specifications for the different products in both text and table formats, and provides images and diagrams. Key products mentioned include MIG-MAG welding machines, plasma cutting power sources, and capacitor discharge spot welders.
This document provides information about semiconductor components in Spice Park's inventory in September 2017. It shows that semiconductors made up 75% of the total inventory of 4,749 pieces. The document includes a breakdown of the 391 diode/general purpose rectifier components in inventory, listing the manufacturer, part number, model, type, thermal rating, and date the information was last updated for each part number.
SPICE MODEL of TPC8115 (Standard+BDS Model) in SPICE PARKTsuyoshi Horigome
This document provides a summary of SPICE model parameters and simulation results for the power MOSFET and body diode components in the TPC8115 device from Toshiba. The model parameters, evaluation circuits, and comparison of measurement and simulation results are given for key electrical characteristics including transconductance, drain current, gate charge, switching time, and reverse recovery. Simulation results show good agreement with measurements for various operating conditions of the MOSFET and diode components in the device.
This document provides a device modeling report for a general purpose rectifier diode with part number 5GLZ47A manufactured by Toshiba. It includes the SPICE model parameters for the diode, simulation results comparing the forward voltage and capacitance characteristics to measurements, and an evaluation of the reverse recovery characteristic.
Used Semiconductor Equipment List :Please email us to check the availability of the items listed in the table. They are subject to prior sale without notic. Appreciate your time!
VECTOR DUTY MOTORS TENV -
Three Phase - Foot Mount - Double C-Face
Designed specifically for inverter operation for applications
requiring 1000:1 constant torque turndown ratio.
* Class F insulation (Impregnation Resin and Magnet wire are class H)
* NEMA design B.
* F1 Mounted (F2 convertible).
* Stainless Steel Nameplate - Laser etched with high contrast background
* Gasketed conduit box
* Class I, Div. 2, Groups A, B, C & D – T3, Class II, Div 2, Groups F & G – T3C
Inverter Rated:
1000 : 1 for constant torque
Features that make a difference:
* Constant torque operation from 0 to base speed (1000:1) on
PWM Vector Drive
* Constant Horsepower operation up to 150% base speed
* Ready for encoder mount
* With thermostats (1 per phase)
* Special nameplate data for easy drive set-up
* Ready for C-face brake, limited to 10 lb-ft braking torque
The document contains a list of 309 items with their respective categories, models, and manufacturers. It includes various semiconductor fabrication equipment such as CVD tools from AMAT and ASM, etch tools from AMAT, metrology tools from KLA and Hitachi, wire bonders from KNS, and more. The list provides information on the types and models of equipment available from the company located in Asia with the website www.semistarcorp.com.
EL-G-01-002-R5 MEDIUM AND LOW POWER DITRIBUTIONS AT PT IFISarif Hidayat
This document is a panel diagram for a medium and low voltage system. It shows the electrical connections between various components including generators, transformers, switchgear, capacitor banks, motors, and cables. There are multiple transformers, switchgear, motor control centers and other electrical equipment connected through cables to distribute power throughout the facility.
Lam Research ,Novellus, Gasonics, Tel ,Tokyo Electron Ltd, Matrix etc. Spare ...Emily Tan
Lam Research Novellus Gasonics Tel Tokyo Electron Ltd Matrix etc. Spare Parts:The items are subject to prior sale without notice. These items are only for end users.
This document provides information on Littelfuse 372 Series radial lead time-lag fuses, including:
- Electrical characteristics such as current ratings, voltage drop, breaking capacity and time-lag curves
- Approvals from certification agencies
- Materials and operating parameters
- Recommended soldering process parameters
- Dimensions and tolerances
- Part numbering system and available packaging options
Semiconductor equipment parts in stock-SSe-0141Emily Tan
This document lists 106 pieces of used semiconductor manufacturing equipment for sale including reflow ovens, screen printers, pick and place machines, feeders, conveyors, inspection equipment, and more. The equipment ranges from 1999 to 2017 and is from manufacturers such as MyData, Universal Instruments, JOT, Electro Design, and more. Potential buyers should contact the seller to check availability and pricing of the pre-owned equipment.
(https://www.wadbros.net/) Established in the year 2007, Wadbros Imports & Exports, are an eminent manufacturer and wholesaler of the wide variety of Ventilation Fan, Exhaust Fan, etc.
Dearborn Protocol Adapter 5 for Trucks,Trailers,Buses and Light Commercial Ve...Jack Chen
Dearborn Protocol Adapter 5 is designed to help manufacturers diagnostic the fault of trucks, trailers, buses and light commercial vehicles.It covers multiple systems and widely used, it's user friendly.Dearborn Protocol Adapter 5 is an proferssinal tool for the maintenance of the commercial vehicle manufacturers.
This document provides specifications for various Caterpillar batteries, including premium high output and general service batteries. It lists technical details such as battery group size, cold cranking amps, reserve capacity, dimensions, and weight for over 50 battery part numbers. The batteries are designed for demanding equipment applications as well as commercial, automotive, and recreational vehicles. The document also notes that all scrap batteries should be recycled.
This document provides information on several servo drive and motor product lines from Applied Motion, including specifications, features, and accessories. It describes three series of servo drives (SVAC3, SV7, BLuAC5) that offer common control options and communications protocols. Details are given on available motor models, drive models, dimensions, I/O configurations, and technical specifications. Accessories like extension cables, breakout boards, and regeneration components are also listed.
Weg crusher-duty-3-phase-motor-usacd0808-brochure-englishDaniel García
The document describes the WEG W22 Crusher Duty three-phase motor. Key features of the motor include increased energy efficiency, reliability for demanding industrial applications, and a longer lifetime through enhancements like upgraded bearings and sealing systems. The motor is designed to reduce maintenance needs and operational costs over its lifetime through energy savings and durability.
Atv catalogue freins a disque industriels 05-2016-enmaha mosawi
This document provides specifications for various industrial disc brakes manufactured by ATV. It includes solid discs with thicknesses of 12.7 or 15 mm and ventilated discs with a thickness of 30 mm and hub. Fail-safe brakes are also described that use electric, hydraulic, or pneumatic actuators to apply braking force through friction linings in an emergency. Direct acting brakes use electromagnets, hydraulics, or pneumatics to control braking force. Technical details like dimensions, weights, inertia, torque limits, and maximum speeds are provided for many brake models.
This document provides information about a refurbished Applied Materials AMAT P5000 Etcher for sale by Semistar Corp. The etcher includes a Mark II mainframe, 8 slot storage elevator, Phase III robot, dual hard drive system, flat screen monitors, heat exchangers, gas panel, generators, 200mm process kit, and calibrated MFCs. Additional customized configurations are available. Semistar Corp is located in San Jose, CA and can be contacted via email for more information about the etcher and other semiconductor equipment and parts listed on their website.
Semiconductor equipment spare parts in usa may 20th 2020Emily Tan
This document contains a list of 148 items for sale including components for semiconductor equipment such as mass flow controllers, vacuum components, RF matching networks, microwave generators, ion implanters, wafer handling equipment and more. The items are from various manufacturers including AMAT, ASTEX, Axcelis, Brooks Automation, BOC Edwards and others.
The document provides information about PBA Systems' IX Series linear motors, including the IX50, IX70, and IX90 models. It includes specifications for each model such as peak and continuous force capabilities, electrical characteristics, thermal properties, and mechanical dimensions. Diagrams show the motor coil and magnet track components. The linear motors are designed for high force motion systems and integrate hall sensors.
Similar to Semiconductor Equipment and Spare Parts 2 (20)
SemiStar Corp Brochure All for website.pdfEmily Tan
SemiStar Corp is a privately owned company that provides comprehensive technical and business development solutions in high-tech manufacturing and research, with applications in the semiconductor, MEMs, biomedical, nanotechnology, solar, LEDs sectors. More specifically, SemiStar Corp. specializes in providing high quality reconditioned semiconductor equipments and express spare parts delivery worldwide.
Based in the heart of Silicon Valley, our experienced management and engineers are dedicated to ensuring optimal quality and customer satisfaction through a timely support system. Our team is committed to being your long term business partner to help you achieve your business goals.
Main Refurbished Equipment
By Equipment Type
Plasma Asher
Plasma Etcher
ICP DRIE RIE Bosch
Evaporator PVD
Sputtering PVD
PECVD CVD ALD
RTA RTP RTO RTN
Robot Controller Aligner
SEM
Wafer Probes
Metrology
Tester
By OEM Names with Models
AG Associates -4100 8108 610
Agilent HP –HP 4062UX
AnnealSys -100
AST
Branson – 3000 Series
Brooks Equipe PRI -ATM-105 104 ESC-100 200
CDE ResMap 178
CHA -Mark 50
CPA -S-Gun Sputter
ElectroGlas –2001 4090u+ 1034
Emscope
F.E.I. – FEG 200
Gasonics – 3510
Hitachi S4700 FE-SEM
Jipelec 100 150 200
KLA-Tencor
Lam Research 490 590 4420
March
Matrix -105 302 303
MPT
MRC -603 643
Nikon
Oxford – 80 RIE PECVD
Perkin-Elmer -4400 Series 2400
PlasmaEtch
PlasmaQuest
PlasmaTherm -790 720
SAMCO -RIE
SLOAN
STS SPTS -ICP HRM
Technics -2000 PE-IIA
Tegal -901e 903e
Temescal – FC-1800 BJD-1800
TES -Temescal FC-1800 BJD-1800
Veeco Cambridge -S200
The document lists various types of semiconductor fabrication equipment including:
- Plasma etchers such as the Applied Materials Plasma II and Lam AutoEtch 590.
- Thin film deposition equipment such as the AMAT AMP-3300 PECVD and Emscope SC-650 Series.
- Mask aligners including the Canon PLA-501 F and Neutronix PLA 500/501.
- Wet benches, plasma ashers, chillers, ovens, rapid thermal processing equipment, coat/develop/bake tools, metrology systems, and miscellaneous parts.
The document lists various used plasma etch, stripper, and asher equipment for sale from Semistar Corp., ranging in price from $9,500 to $175,000. The most expensive items are a Matrix 209S plasma asher for $175,000 and a Matrix 105 plasma asher for $98,000, while several Branson and Matrix plasma ashers and etchers are listed at $12,500, $22,500, and $29,500. Semistar Corp. sells used semiconductor equipment and provides parts and service in the U.S.
Plasma etcher rie icp drie bosch process equipmentEmily Tan
This document lists various used semiconductor fabrication equipment for sale, including plasma etchers, reactive ion etchers (RIE), and asher systems from manufacturers like STS, Lam Research, Oxford Instruments, ICP Bosch, and Tegal. The prices range from $275,000 for a Lam Research 4420 plasma etch tool down to $9,500 for a Yield Engineering Systems dry asher. Models include STS Multiplex ICP systems, Lam AutoEtch and Rainbow tools, Oxford Plasmalab RIEs, and various plasma etchers and asher systems from Tegal, Matrix, Plasma Therm, and others.
This document lists several plasma deposition equipment items for sale including their manufacturer, model, type, and price. The most expensive items are a $79,500 Plasma Therm 790 Series PECVD system and a $77,500 Oxford Instruments Plasmalab 80+ DPCVD system. Also listed are lower cost plasma etchers and deposition systems starting at $5,000 from Oxford Plasma Technology.
This document lists various oven and furnace models from different manufacturers along with their prices, ranging from $1,200 to $3,980. It provides contact information for Semistar Corp, a company that sells semiconductor equipment parts and services in the US.
Metrology probe tester equipment instrumentEmily Tan
This document lists various semiconductor manufacturing equipment for sale, including their prices. The most expensive items are an electron beam lithography system for $1,000,000 and an X-ray diffraction system for $78,000. Other listed equipment include wafer probers, thin film measurement systems, surface profilers, and microscopy tools, with prices ranging from $35,000 to under $5,000. The document appears to be from a company called Semistar Corp that sells used semiconductor equipment.
The document lists several used mask aligners for sale from Semistar Corp, including various Canon Neutronix and PLA models priced between $18,500 to $35,000. Contact and company information is provided at the bottom for Semistar Corp, which sells semiconductor equipment parts and used mask aligners in the United States.
This document lists various electron beam evaporators and thermal evaporators for sale from multiple manufacturers including CHA Industries, Temescal, Varian, TES, Airco Temescal, and Kurt J Lesker. The prices range from $145,000 for some combined e-beam and thermal evaporators from Varian and CHA Industries down to $18,500 for older model Varian e-beam evaporators. Contact information is provided for Semistar Corp. regarding sales of semiconductor equipment parts and services.
This document lists equipment for sale from various manufacturers for semiconductor wet processing including batch developing stations, plating equipment, wet benches, and spin dryers priced between $1,980 to $35,000. Key items include a BOLD batch developing station for $35,000, an EEJA manual plater for $35,000, a Gold Techni plating bath system for $15,000, and various wet process equipment from APT and Wet Process Equipment between $7,500 to $9,500.
This document lists various sputtering systems and their prices from different manufacturers including Perkin-Elmer, Materials Research Corporation, Temescal, CPA, and CVC Products. The most expensive systems are three Perkin-Elmer models ranging from $125,000 to $155,000, while the cheapest option is a CVC Products system at $12,500. Contact information is provided for Semistar Corp for additional semiconductor equipment parts and services.
This document contains an inventory list of 215 items located in either Nanjing, China or Morgan Hill, CA USA. The majority of the items are various types of process equipment used in semiconductor manufacturing, including bonders, chillers, coaters, CVD tools, developers, etchers, evaporators, furnaces, metrology equipment, ovens, PECVD tools, plasma ashers, pumps, RTP tools, sputtering systems and more. The items are from various manufacturers such as K&S, SMC, SVG, SOLITEC, PlasmaLab, BOLD, Temescal, Varian, Ditector, CANON, Nanometrics, Gaertner Scientific, Rudolph Research
Used SMT & PTH &ATE assembly equipment inventoryEmily Tan
Used SMT & PTH &ATE assembly equipment inventory:Pls eamil us for the availability of the Used SMT & PTH &ATE assembly equipment. Appreciate your time!
Electronic test equipment, Oscilloscope, Spectrum, Analyzer ,DMMEmily Tan
Electronic test equipment Oscilloscope Spectrum Analyzer DMM:The following items (ID-SS8267-1-1) are subject to prior sale without notice. These items are only for end users.
Semiconductor Equipment:Please us for more info and availability. They are subject to prior sale without notice.These items are only for end users. Appreciate your time! sales@semistarcorp.com . ID-8032-1-1
Semiconductor Equipment Inventory.Please email us for more info/ the availability of these equipment. These are subject to prior sale.Appreciate your time! sales@semistarcorp.com
Semiconductor Equipment Spare Parts in AsiaEmily Tan
Semiconductor Equipment Spare Parts in Asia:Please email us for the availability of the items. They are subject to prior sale without notice.Appreciate your time!
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Digital Marketing Trends in 2024 | Guide for Staying AheadWask
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptxSitimaJohn
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.