 Undergone on-job training in various streams of Test (Labview & Test stand Application development,NPI, Test Engineering, Manufacture Engineering and Diagnostic Engineering) for a period of a year in last 13 years.  Very Strong Programming knowledge in LabVIEW – NI-DAQ - Teststand  Hand on experience in executing project with NI DAQ system (PCI,PXI NI-DAQ, RS-232 and GPIB instruments  Involved in Equipment & Instrument selection and procurement activities  Commissioning Experience of Testing Lab  Having good working knowledge with different sensors and Instrumentation  Hand on experience in designing signal conditioning and driver hardware circuits  Good team player, keen learner, problem solving ability and effective communicator  Experience with electronic circuitry (Analog/Digital)  Fluent in schematics diagram/circuitry and components specs.  Deploy myself to Plan, establish, and maintain Test & Debug setup in India Factory and get certified by the customer.  Installing Production Support Software’s and Application tool.  Follow quality policies like “Gauge Repeatability & Reproducibility (GRR), Calibration, Correlation principles” for qualifying the test setup.  Maintain DPHU (Defects per Hundred units) rate under control, yield rate, production down time by stabilizing the test setup and troubleshooting the problems that arise during the production.  Report bugs to developers and maintains documentation of test results and ensure closure.  Knowledge to handle and utilize compensate techniques in ICT (Agilent i3070).

1. Resume
Sankaralingam.D .
Cell:+91-9940422273
Email: linklingam@gmail.com
Objective
To contribute my experiences, abilities and knowledge to implement a system and process with increasing
productivity in the area of Testing and Analysis through continual process improvement
Professional Profile
 Six and half years of Experience in Design and Development LabVIEW & TEST STAND based Automated
Test System and Integration in Test Development Engineering ,Test System Selection, Equipment&
Instrument Procurement and System Integration and Conducting Tests at New Product Development.
 Six years of Experience in Test Engineering & Debugging
Academic Profile
 B,Sc in Electronics and Communication Engineering, St,JOSPH College, Bharathithasan university –Trichy
 Thorough Knowledge of “Power Electronics(SMPS) fundamentals” with familiarity of the major interfaces
 Having Good Experience on Lab View & Test stand
Career Profile
PRESENT EMPLOYER
.
Company Profile : Sanmina-SCI India PVT Ltd
Designation : Test Application & Development Engineer
Duration : From Sep- 2009, till date.
Project : Kone Elevator, Mobile BTS, Card swipe Machine,
Power supply adaptor, Medical Product, System Server
Used Instruments : DC Power supply, Aardvark I2C device,
Agilent DC Electronics Load, NI-Daq, NI-SCOPE,
Agilent Network analyzer,
Used Communication : USB, RS232, LAN, GPIB & PXI
Testing Method : Lab-View Application,
Developing plate form : Lab-View & Test Stand
PREVIOUS EMPLOYER
Company Profile-1 : JABIL INDIA Pvt Ltd in Pune,
Designation : Testing Engineer
Duration : From Oct 2007 to Aug 2009.
Project : SETUP BOX, TV, Mobile BTS, Card swipe Machine, Power supply adaptor
Testing Method : VB & Lab-View Application
Company Profile-2 : Advance Power Display system Pvt ltd.
(APDS Technologies are the Manufacturer of SMPS)
Designation : Test & Failure Analysis engineer
Duration : From Sep 2001 to Aug 2007.
Project : SMPS (From 200Watts to 4000Watts)
Testing Method : VB Application

2. Resume
EXPERIENCE PROFILE
 Undergone on-job training in various streams of Test (NPI, Test Engineering, Manufacture Engineering and
Diagnostic Engineering) for a period of a year in last 12 years.
 Very Strong Programming knowledge in LabVIEW – NI-DAQ - Teststand
 Hand on experience in executing project with NI DAQ system (PCI,PXI NI-DAQ,
RS-232 and GPIB instruments
 Involved in Equipment & Instrument selection and procurement activities
 Commissioning Experience of Testing Lab
 Having good working knowledge with different sensors and Instrumentation
 Hand on experience in designing signal conditioning and driver hardware circuits
 Good team player, keen learner, problem solving ability and effective communicator
 Experience with electronic circuitry (Analog/Digital)
 Fluent in schematics diagram/circuitry and components specs.
 Deploy myself to Plan, establish, and maintain Test & Debug setup in India Factory and get certified by the customer.
 Installing Production Support Software’s and Application tool.
 Follow quality policies like “Gauge Repeatability & Reproducibility (GRR), Calibration, Correlation principles” for
qualifying the test setup.
 Maintain DPHU (Defects per Hundred units) rate under control, yield rate, production down time by stabilizing the test
setup and troubleshooting the problems that arise during the production.
 Report bugs to developers and maintains documentation of test results and ensure closure.
 Knowledge to handle and utilize compensate techniques in ICT (Agilent i3070).
Role & Responsibilities
 Responsible for test and handling capacity planning and utilization for Final Test
 Responsible for planning data management & process improvement
 Responsible for submitting test investment for capitalized assets (capacity & non capacity)
 Interface with Business Division, Test Development, Equipment& process Engineering to determine / challenge test
planning premises to meet cost target & delivery
 Lead in driving cost improvement / reduction projects
 Responsible in providing planning report to various supporting functional groups - Finance, Operations etc
 Taking/Managing Regular Backup on each Client systems (Log, Result Files & Disk Image Cloning).
 Managing the team for Tester Breakdown Maintenance.
 Planning for Calibrating the Testers as per Calibration Schedule.
 Planning for Preventive Maintenance for all Testers and it’s Workstations
 Configuring and Modifying Test plans & Sequence files as per customer’s demand/requirement.
 Doing Tester Validation for all Testers (GAGE R&R) and maintaining Validation Reports
 Involved in Tester Spare Control and Inventories
 Drafting Work Instructions (Operating Instructions) Documents to RUN the testers in such a Systematic manner and
releasing to the Production line for Operators references.
AREAS OF EXPERTISE
 Act as product Test & Development Engineer.
 Create requirement specifications.
 Test & Development Setup and certification utilizing effective resources.
 Have good understanding of test & Development processes and methodology and hold better Development skills.
 System integration to leverage technology and reduce Development time.
 Develop and support training material.
 To provide training for all new Co-Workers.
 Develop application notes and Document it.
 Support product related issues and suggest solutions.
 Knowledge to handle and utilize compensate techniques in ICT (Agilent i3070).
 All types of energy sources, Like Inverter or converter based supplies Ability to compare and analyze various energy
sources with respect to loads, Efficiency other performance parameters,
 Trouble shooting the failure parts.
 Analyzing the root cause of failure and implement the same for all products

3. Resume
CONSCIENTIOUSNESS
 Developed professional Test engineering services for the proposal render by the customer. Establish product
validation setup, debug, maintain and follow up the set up through means of good analytical and problem solving
Skills
 PERSONAL PROFILE
 Date of Birth : 31-05-1981
 Sex : Male
 Languages : English, Tamil, Hindi.
 Father’s Name : Mr.S.Dharmalingam
 Notice Period : 30days
 Mail id : sdslingam1981@gmail.com
DECLARATION:
 I hereby declare that the statements made by me, are true to the best of my knowledge and belief. Given the
opportunity, I would prove to be an asset to the organization I serve.
 Place: Chennai yours faithfully
 Date: 21.02.2016 (D.SANKARALINGAM