RFP Bracket Installation
•
1 like•145 views
The document provides instructions for installing a recessed floor panel bracket kit to lower the subfloor between engineered wood floor joists. The kit includes brackets, screws, and other hardware to attach the brackets to the joists and secure the subfloor panels below the original floor level, creating a recess. Instructions explain how to measure gaps, cut panels to fit, attach brackets to joists, secure subfloor panels with brackets, and finish with tile backer board. The kit allows for installing a drain or other recessed floor surface.
Report
Share
Report
Share
Recommended
Avalon Log Homes Construction Manual
The document provides instructions for constructing an Avalon log home. It emphasizes properly leveling the first course of logs, sealing between logs and foundation, and using anchor bolts and flashing to secure the structure. The random length log system requires planning log placement for efficiency. Proper site preparation, receiving materials, and erecting the subfloor are outlined.
Avalon Log Homes Construction Manual 2011
Check out our Log Homes, Log Cabins, Luxury Log Homes, new log floor plans, client photo galleries, new articles, and videos at http://www.avalonloghomes.com/
Planning a new internal partition
Planning an internal partition requires considering lighting, ventilation, access, electrics, and plumbing. A basic stud partition framework is recommended, using timber plates, studs, and noggins. The framework is secured to the floor and ceiling, with studs spaced to support plasterboard cladding. Services like lighting can be installed before cladding. Once clad and finished, the partition provides separated rooms within the existing space.
Roofs
The document discusses different types of roofs, their components, and considerations for design. It describes roofs as the uppermost part of a building that protects it from weather using structural elements and coverings. The main types are pitched, flat, and curved roofs. Pitched roofs are suitable for heavy rainfall areas and have simple shapes, while flat roofs can be used on buildings of any size or shape, especially in hot and dry regions. Key elements of roofs include the pitch, coverings, rafters, purlins, ridges, and eaves. Single roofs like lean-to and couple roofs have limited spans, while double roofs using purlins can support longer spans.
Vestibule connector
The document provides installation instructions for connecting a vestibule connector between two shelters. It involves aligning the shelters and connection points, installing the vestibule floor between the shelters and attaching them, installing the vestibule framework including eave bars and doors, and attaching the vestibule roof panel to create an enclosed vestibule between the two shelters.
Gate keeper 20 series
The document provides step-by-step instructions for assembling, setting up, and striking a GateKeeper 20 Series shelter. It begins with evaluating the site and positioning equipment. It then details how to assemble the frame, attach the roof and wall fabrics, install flooring and doors, and connect accessories. The document concludes with instructions for taking down, cleaning, folding, and repackaging the various shelter components in an organized manner.
Gate keeper 1935 series
This document provides instructions for setting up, striking, and packing away a Gatekeeper 1935 Series shelter. It describes the process in 19 sections labeled a-q, covering evaluating the site, positioning equipment, assembling the frame, attaching fabric panels to form the roof and walls, installing accessories, and finally striking and folding the shelter for storage. The instructions emphasize safety, proper techniques, and ensuring all components are cleaned and stored in the corresponding bags.
ebbe INNI Drain Installed at Shower Entry - Wood Subfloor
This document provides instructions for installing an INNI drain at a shower entry with a wood subfloor. The INNI drain is custom cut to fit within framed walls without cutting floor joists. A 3/4" wood subfloor topped with 1/4" tile backer creates a 1" floor thickness to match the drain height. Clearance is needed where end sweeps attach and at the drain outlet.
Recommended
Avalon Log Homes Construction Manual
The document provides instructions for constructing an Avalon log home. It emphasizes properly leveling the first course of logs, sealing between logs and foundation, and using anchor bolts and flashing to secure the structure. The random length log system requires planning log placement for efficiency. Proper site preparation, receiving materials, and erecting the subfloor are outlined.
Avalon Log Homes Construction Manual 2011
Check out our Log Homes, Log Cabins, Luxury Log Homes, new log floor plans, client photo galleries, new articles, and videos at http://www.avalonloghomes.com/
Planning a new internal partition
Planning an internal partition requires considering lighting, ventilation, access, electrics, and plumbing. A basic stud partition framework is recommended, using timber plates, studs, and noggins. The framework is secured to the floor and ceiling, with studs spaced to support plasterboard cladding. Services like lighting can be installed before cladding. Once clad and finished, the partition provides separated rooms within the existing space.
Roofs
The document discusses different types of roofs, their components, and considerations for design. It describes roofs as the uppermost part of a building that protects it from weather using structural elements and coverings. The main types are pitched, flat, and curved roofs. Pitched roofs are suitable for heavy rainfall areas and have simple shapes, while flat roofs can be used on buildings of any size or shape, especially in hot and dry regions. Key elements of roofs include the pitch, coverings, rafters, purlins, ridges, and eaves. Single roofs like lean-to and couple roofs have limited spans, while double roofs using purlins can support longer spans.
Vestibule connector
The document provides installation instructions for connecting a vestibule connector between two shelters. It involves aligning the shelters and connection points, installing the vestibule floor between the shelters and attaching them, installing the vestibule framework including eave bars and doors, and attaching the vestibule roof panel to create an enclosed vestibule between the two shelters.
Gate keeper 20 series
The document provides step-by-step instructions for assembling, setting up, and striking a GateKeeper 20 Series shelter. It begins with evaluating the site and positioning equipment. It then details how to assemble the frame, attach the roof and wall fabrics, install flooring and doors, and connect accessories. The document concludes with instructions for taking down, cleaning, folding, and repackaging the various shelter components in an organized manner.
Gate keeper 1935 series
This document provides instructions for setting up, striking, and packing away a Gatekeeper 1935 Series shelter. It describes the process in 19 sections labeled a-q, covering evaluating the site, positioning equipment, assembling the frame, attaching fabric panels to form the roof and walls, installing accessories, and finally striking and folding the shelter for storage. The instructions emphasize safety, proper techniques, and ensuring all components are cleaned and stored in the corresponding bags.
ebbe INNI Drain Installed at Shower Entry - Wood Subfloor
This document provides instructions for installing an INNI drain at a shower entry with a wood subfloor. The INNI drain is custom cut to fit within framed walls without cutting floor joists. A 3/4" wood subfloor topped with 1/4" tile backer creates a 1" floor thickness to match the drain height. Clearance is needed where end sweeps attach and at the drain outlet.
Build a shed
This document provides instructions for building a garden shed. It discusses selecting and preparing a level base, erecting the wall panels and roof, adding a floor, and optionally insulating and wiring the shed for power. The key steps are to lay a level concrete base or paving slabs, join the prefabricated wall and roof panels together using screws or nails, secure the roof felt, and finish by optionally lining walls for insulation and having an electrician run power if needed. Proper preparation of the base and assembly of panels are essential to constructing a sound shed structure.
Hanging a door
The document provides instructions for hanging an internal door. Some key points:
1) Doors often need to be trimmed to fit the opening as houses can shift over time. It is best to start with a square frame and cut the door to fit rather than adapting the frame.
2) Common internal door sizes are listed in both metric and imperial measurements. Doors can also be purchased as "door blanks" and customized.
3) When hanging the door, mark where it will be cut by holding it in the frame. Always leave the cutting line so the door is not cut too small. Hinges are typically 7 inches from the top and bottom.
4) Chisel out recesses
Build a carport
This document provides instructions for building a basic carport structure using wood. It can be built with DIY skills and a few tools. The key steps include setting posts securely in place to support the roof beams and wallplate attached to the house. Joists are then positioned on the beams and fascia boards are added before securing corrugated roofing sheets. Flashing tape is also applied between the roof and house wall to prevent water damage. An inexpensive carport provides shelter for a vehicle while allowing some open sides.
Chapter 5
1. The document discusses different types of roofs including pitched, flat, gambrel, mansard, and shed roofs. Pitched roofs are suitable for smaller buildings while flat roofs are better for large or irregularly shaped buildings.
2. Pitched roofs have members like rafters, purlins, wall plates, and ridges. Flat roofs use materials like asphalt, aluminum sheeting, zinc, and copper. Support for roofs includes single, collar, double, and trussed roofs using king posts, queen posts, or mansard trusses for large spans.
3.
Report on roof and roof covering
This document provides an overview of roofs and roof coverings. It discusses various types of roofs including pitched or sloped roofs and flat or terrace roofs. Pitched roofs can be made of various materials and come in different styles like lean-to, coupled, and truss roofs. Flat roofs have advantages like large surface area but require more maintenance. The document also examines considerations for roof design and various roof covering materials like tiles, asbestos sheets, and galvanized iron. It provides details on installation and properties of different covering options.
Roofs and roof covering
roof is the covering on the uppermost part of a building. A roof protects the building and its contents from the effects of weather.
Structures that require roofs range from a letter box to a cathedral or stadium, dwellings being the most numerous.
In most countries a roof protects primarily against rain. Depending upon the nature of the building, the roof may also protect against heat, against sunlight, against cold and against wind.
Ceramic tiles for worktops
Ceramic tiles provide a durable surface for floors, worktops, and other areas. When tiling, it is important to properly prepare the surface, set out the tiles, cut tiles as needed, grout, and finish edges. Tiles require precise laying and can be cut using different tools depending on the tile material. Spacers are used to establish grout lines and the surface must be completely level for the best results.
Types of roof
This document discusses different types of roofs and roof elements. It provides details on:
- Qualities a roof should have like weather resistance, durability, insulation, and requiring minimal maintenance.
- Roof elements like pitch, coverings, verges, ridges, eaves, dormers, and valleys.
- Different types of pitched roofs using timber or steel trusses, as well as roofs with dormers or flat roofs.
Deck marking
This document provides instructions for laying out the deck by marking locations for footings and support posts. It emphasizes measuring accurately, checking for square, and establishing string lines to mark the deck perimeter and post locations. The layout process establishes the foundation for a safe, level deck that is properly supported and meets local building codes. Taking time to complete the layout carefully helps avoid costly mistakes later in construction.
Visual Dictionary Final
This visual dictionary defines and describes various construction terms over three pages. It includes definitions of materials like air barrier paper, attic ventilation components, and concrete masonry units. It also defines tools such as backhoes and bulldozers. Additionally, it describes framing elements, plumbing components, roofing materials and terms, and other construction aspects like windows, doors, and code requirements.
Framing a roof
This document defines and describes key components of roof framing, including the ridge board, rafters, hips, valleys, sheathing, fascia, soffit, dormers, and pitch. It explains that the ridge board transfers the roof load through rafters to walls below, rafters give the roof its shape, and fascia and soffit protect the structure. Different roof types - gable, hip, and valley roofs - are outlined and examples of each are shown in framing plans and illustrations.
Lay a laminate floor
This document provides instructions for laying a laminate floor, including:
1. Calculating the amount of underlay and laminate flooring needed based on room dimensions.
2. Preparing the sub-floor by ensuring it is dry, level, and adding a damp proof membrane if needed.
3. Conditioning the laminate flooring by leaving it in the room for 48 hours before installation.
4. Laying the flooring using the LOC (lock) system without adhesive, including staggering the joints, fitting around pipes, and installing the final row.
Wooden flooring and repair
Please contact at anisha13naidu@gmail.com for the ppt and I will send it to you.
Presentation on Timber flooring, faults, methods of repair, products and case study.
How to build a retaining wall
This document provides instructions for building a low garden retaining wall next to an existing fence. The 1 meter tall retaining wall will be built 1 meter in front of the fence. Posts spaced no more than 1.2 meters apart will be set in holes and secured with concrete. Treated wooden boards will be attached to the posts to form the retaining wall, and a top capping board installed. The wall will be braced to the fence to prevent movement, and include drainage before backfilling.
Design Considerations for Large Format Tile
This course will examine design and installation considerations for large format ceramic and porcelain tile (LFT). It will define the sizing categories for tile, and will address opportunities and constraints unique to LFT as defined by ANSI standards and TCNA methods. It will address bonding pattern recommendations, acceptable warpage and lippage, and acceptable minimums &variation in grout joint width. The program will also take a close look at substrate preparation for LFT including substrate flatness tolerances. Finally, the program will provide information on the newly defined category of thin Gauged Porcelain Tile (GPT) and thin GPT slabs/panels, including an update on the new ANSI standards currently for this product category.
cereamic
Ceramic tile installation involves several steps:
1) Preparing the subfloor to be structurally sound, smooth, flat and free of contaminants
2) Laying out the room using chalk lines for guidance
3) Applying thinset mortar to the subfloor using a notched trowel, then pressing tiles into the mortar
4) Allowing the thinset to set before grouting the following day
5) Grouting involves spreading grout over tiles using a float and cleaning excess grout from the tiles.
Epic 3 8 Installation Instructions
This document provides installation instructions for Shaw EPIC 3/8" pre-finished engineered hardwood. It discusses special notes regarding plank orientation, owner/installer responsibilities, job site inspection and acclimation requirements. It also outlines subfloor preparation steps, required tools, and provides details on nail/staple down, glue down and floating installation methods. Radiant heated subfloors are also addressed. The instructions emphasize moisture testing, acclimation and maintaining proper temperature and humidity conditions during and after installation.
lp-smartside.pdf
LP SmartSide Trim & Fascia application instructions provide guidelines for proper installation and finishing to ensure warranty coverage. Key points include: storing trim off the ground and under cover; maintaining clearances from grade and other surfaces; using flashing at intersections; fastening trim securely with the correct nails at proper spacing; leaving gaps at joints to seal; and following all instructions for cutting, fitting and finishing exposed edges. Proper installation is necessary to prevent moisture damage and ensure the trim performs as intended.
Scottish home improvement denver application instructions
Scottish Home Improvements provides the highest quality windows and siding to clients in Denver and all across Colorado. We feature James Hardie fiber cement siding as well as Milgard windows and doors. We can also help you with your other fiber cement, vinyl, wood, cedar, and steel siding commercial and residential projects. Contact us today to schedule your consultation.
Odl tube training
The document provides instructions for installing an ODL tubular skylight. It describes the basic 5-step installation process: 1) determining the ceiling location, 2) determining the roof location, 3) cutting the hole in the roof, 4) cutting the hole in the ceiling, and 5) assembling and installing the tubular skylight components. Key aspects of ODL tubular skylights are that they provide natural light with minimal installation disruption and lower cost compared to traditional skylights.
Superseal Tile Subfloor Installation Instructions
Superseal's Tile Subfloor is a uniquely designed dimpled crack isolation membrane that separates the floor base from the tile floor finish preventing crack transfer. It has two fleece sides that permanently bond with thinset, and an internal waterproof layer that tops moisture from transferring in both directions to provide complete long term floor durability. Follow these guidelines on your next tiling project for a problem free installation. To purchase Superseal products visit www.superseal.ca or call 1-800-571-1877
How to Install Allure GripStrip Flooring - Official Installation Instructions...
Official guide on how to easily install Allure GripStrip flooring. These step by step installation instructions will help you keep the installation of your beautiful new resilient vinyl plank flooring simple and easy.
More Related Content
What's hot
Build a shed
This document provides instructions for building a garden shed. It discusses selecting and preparing a level base, erecting the wall panels and roof, adding a floor, and optionally insulating and wiring the shed for power. The key steps are to lay a level concrete base or paving slabs, join the prefabricated wall and roof panels together using screws or nails, secure the roof felt, and finish by optionally lining walls for insulation and having an electrician run power if needed. Proper preparation of the base and assembly of panels are essential to constructing a sound shed structure.
Hanging a door
The document provides instructions for hanging an internal door. Some key points:
1) Doors often need to be trimmed to fit the opening as houses can shift over time. It is best to start with a square frame and cut the door to fit rather than adapting the frame.
2) Common internal door sizes are listed in both metric and imperial measurements. Doors can also be purchased as "door blanks" and customized.
3) When hanging the door, mark where it will be cut by holding it in the frame. Always leave the cutting line so the door is not cut too small. Hinges are typically 7 inches from the top and bottom.
4) Chisel out recesses
Build a carport
This document provides instructions for building a basic carport structure using wood. It can be built with DIY skills and a few tools. The key steps include setting posts securely in place to support the roof beams and wallplate attached to the house. Joists are then positioned on the beams and fascia boards are added before securing corrugated roofing sheets. Flashing tape is also applied between the roof and house wall to prevent water damage. An inexpensive carport provides shelter for a vehicle while allowing some open sides.
Chapter 5
1. The document discusses different types of roofs including pitched, flat, gambrel, mansard, and shed roofs. Pitched roofs are suitable for smaller buildings while flat roofs are better for large or irregularly shaped buildings.
2. Pitched roofs have members like rafters, purlins, wall plates, and ridges. Flat roofs use materials like asphalt, aluminum sheeting, zinc, and copper. Support for roofs includes single, collar, double, and trussed roofs using king posts, queen posts, or mansard trusses for large spans.
3.
Report on roof and roof covering
This document provides an overview of roofs and roof coverings. It discusses various types of roofs including pitched or sloped roofs and flat or terrace roofs. Pitched roofs can be made of various materials and come in different styles like lean-to, coupled, and truss roofs. Flat roofs have advantages like large surface area but require more maintenance. The document also examines considerations for roof design and various roof covering materials like tiles, asbestos sheets, and galvanized iron. It provides details on installation and properties of different covering options.
Roofs and roof covering
roof is the covering on the uppermost part of a building. A roof protects the building and its contents from the effects of weather.
Structures that require roofs range from a letter box to a cathedral or stadium, dwellings being the most numerous.
In most countries a roof protects primarily against rain. Depending upon the nature of the building, the roof may also protect against heat, against sunlight, against cold and against wind.
Ceramic tiles for worktops
Ceramic tiles provide a durable surface for floors, worktops, and other areas. When tiling, it is important to properly prepare the surface, set out the tiles, cut tiles as needed, grout, and finish edges. Tiles require precise laying and can be cut using different tools depending on the tile material. Spacers are used to establish grout lines and the surface must be completely level for the best results.
Types of roof
This document discusses different types of roofs and roof elements. It provides details on:
- Qualities a roof should have like weather resistance, durability, insulation, and requiring minimal maintenance.
- Roof elements like pitch, coverings, verges, ridges, eaves, dormers, and valleys.
- Different types of pitched roofs using timber or steel trusses, as well as roofs with dormers or flat roofs.
Deck marking
This document provides instructions for laying out the deck by marking locations for footings and support posts. It emphasizes measuring accurately, checking for square, and establishing string lines to mark the deck perimeter and post locations. The layout process establishes the foundation for a safe, level deck that is properly supported and meets local building codes. Taking time to complete the layout carefully helps avoid costly mistakes later in construction.
Visual Dictionary Final
This visual dictionary defines and describes various construction terms over three pages. It includes definitions of materials like air barrier paper, attic ventilation components, and concrete masonry units. It also defines tools such as backhoes and bulldozers. Additionally, it describes framing elements, plumbing components, roofing materials and terms, and other construction aspects like windows, doors, and code requirements.
Framing a roof
This document defines and describes key components of roof framing, including the ridge board, rafters, hips, valleys, sheathing, fascia, soffit, dormers, and pitch. It explains that the ridge board transfers the roof load through rafters to walls below, rafters give the roof its shape, and fascia and soffit protect the structure. Different roof types - gable, hip, and valley roofs - are outlined and examples of each are shown in framing plans and illustrations.
What's hot (11)
Similar to RFP Bracket Installation
Lay a laminate floor
This document provides instructions for laying a laminate floor, including:
1. Calculating the amount of underlay and laminate flooring needed based on room dimensions.
2. Preparing the sub-floor by ensuring it is dry, level, and adding a damp proof membrane if needed.
3. Conditioning the laminate flooring by leaving it in the room for 48 hours before installation.
4. Laying the flooring using the LOC (lock) system without adhesive, including staggering the joints, fitting around pipes, and installing the final row.
Wooden flooring and repair
Please contact at anisha13naidu@gmail.com for the ppt and I will send it to you.
Presentation on Timber flooring, faults, methods of repair, products and case study.
How to build a retaining wall
This document provides instructions for building a low garden retaining wall next to an existing fence. The 1 meter tall retaining wall will be built 1 meter in front of the fence. Posts spaced no more than 1.2 meters apart will be set in holes and secured with concrete. Treated wooden boards will be attached to the posts to form the retaining wall, and a top capping board installed. The wall will be braced to the fence to prevent movement, and include drainage before backfilling.
Design Considerations for Large Format Tile
This course will examine design and installation considerations for large format ceramic and porcelain tile (LFT). It will define the sizing categories for tile, and will address opportunities and constraints unique to LFT as defined by ANSI standards and TCNA methods. It will address bonding pattern recommendations, acceptable warpage and lippage, and acceptable minimums &variation in grout joint width. The program will also take a close look at substrate preparation for LFT including substrate flatness tolerances. Finally, the program will provide information on the newly defined category of thin Gauged Porcelain Tile (GPT) and thin GPT slabs/panels, including an update on the new ANSI standards currently for this product category.
cereamic
Ceramic tile installation involves several steps:
1) Preparing the subfloor to be structurally sound, smooth, flat and free of contaminants
2) Laying out the room using chalk lines for guidance
3) Applying thinset mortar to the subfloor using a notched trowel, then pressing tiles into the mortar
4) Allowing the thinset to set before grouting the following day
5) Grouting involves spreading grout over tiles using a float and cleaning excess grout from the tiles.
Epic 3 8 Installation Instructions
This document provides installation instructions for Shaw EPIC 3/8" pre-finished engineered hardwood. It discusses special notes regarding plank orientation, owner/installer responsibilities, job site inspection and acclimation requirements. It also outlines subfloor preparation steps, required tools, and provides details on nail/staple down, glue down and floating installation methods. Radiant heated subfloors are also addressed. The instructions emphasize moisture testing, acclimation and maintaining proper temperature and humidity conditions during and after installation.
lp-smartside.pdf
LP SmartSide Trim & Fascia application instructions provide guidelines for proper installation and finishing to ensure warranty coverage. Key points include: storing trim off the ground and under cover; maintaining clearances from grade and other surfaces; using flashing at intersections; fastening trim securely with the correct nails at proper spacing; leaving gaps at joints to seal; and following all instructions for cutting, fitting and finishing exposed edges. Proper installation is necessary to prevent moisture damage and ensure the trim performs as intended.
Scottish home improvement denver application instructions
Scottish Home Improvements provides the highest quality windows and siding to clients in Denver and all across Colorado. We feature James Hardie fiber cement siding as well as Milgard windows and doors. We can also help you with your other fiber cement, vinyl, wood, cedar, and steel siding commercial and residential projects. Contact us today to schedule your consultation.
Odl tube training
The document provides instructions for installing an ODL tubular skylight. It describes the basic 5-step installation process: 1) determining the ceiling location, 2) determining the roof location, 3) cutting the hole in the roof, 4) cutting the hole in the ceiling, and 5) assembling and installing the tubular skylight components. Key aspects of ODL tubular skylights are that they provide natural light with minimal installation disruption and lower cost compared to traditional skylights.
Superseal Tile Subfloor Installation Instructions
Superseal's Tile Subfloor is a uniquely designed dimpled crack isolation membrane that separates the floor base from the tile floor finish preventing crack transfer. It has two fleece sides that permanently bond with thinset, and an internal waterproof layer that tops moisture from transferring in both directions to provide complete long term floor durability. Follow these guidelines on your next tiling project for a problem free installation. To purchase Superseal products visit www.superseal.ca or call 1-800-571-1877
How to Install Allure GripStrip Flooring - Official Installation Instructions...
Official guide on how to easily install Allure GripStrip flooring. These step by step installation instructions will help you keep the installation of your beautiful new resilient vinyl plank flooring simple and easy.
How to Install the Last Row of Laminate Flooring
How to Install the Last Row of Laminate Flooring - Installation Tutorial
- Universal Installation: This tutorial walks you a universal installation of the last row of laminate flooring. It can be used in any type of room including one that may have obstacles, cabinets or tight spaces.
Step 1: Measure the Gap: In most cases, the last row of flooring will need to be cut in order to fit the space. You will need to measure the gap between the last installed plank and the wall. Remember to factor in the expansion gap!
Tip: Measure the gap at each end of the plank to get an accurate measurement. Walls can bow in or out causing a slightly different measurement at the beginning and end of a plank.
Step 2: Expansion Gap: Be sure to exclude the expansion gap in your measurement! .25” for a room under 30 ft. in length, .5” for over 30 ft. in length. Your moldings should cover this gap.
Step 3: Mark your Plank: Once the width of the plank is determined, mark the plank with a pencil according to the cut needed. Use another plank as your straight edge guide.
Tip: If the side of the plank with a locking system is against the wall, you will want to trim the plank so it has a smooth, solid edge butting against the wall.
Step 4: Cut your Plank: Use a saw to cut the plank with the decorative side up. We recommend using a jigsaw or table saw.
Jigsaw: Use a laminate cutting blade, which has a medium tooth, downstroke blade.
Table Saw: Use a medium tooth carbide blade with upside down teeth.
Step 5: Lock in the Plank: Add spacers to the end of the plank. Tilt the plank into the locking system at a 45 degree angle.
Tip: Before installing, check to make sure the plank fits. You may have to cut more of the plank to fit if your previous cut wasn’t as precise.
Step 6: Use a Pull Bar: Use a pull bar along the side of the plank, pushing the plank down and into the locking system securely Do this along the full plank.
Hint: Depending on the locking system, you may need to connect several planks together and install all at one time. The ends may not be able to connect plank by plank.
Step 7: The Next Plank: Repeat steps 1-4 to measure and cut the next plank for installation.
Step 8: Trim the Track: In most cases, it will be hard to lock your plank in two both locking systems. You can trim the track down with a blade or end of the pull bar to prepare for gluing the planks together.
Step 9: Glue the Planks: After the track is trimmed, apply woodworkers glue on the joint. Position the next plank on an angle to connect into the locking system without lowering the edge onto the glue.
Step 10: Tap Together: Use the pull bar on the side of the plank like previously stated. To secure the first and second plank, use a tapping block to connect the ends of the first and second plank in the last row.
Step 11 – Continue Installing: Continue installing the planks until you are at the end of the row. Now you’re ready to install your moldings!
Tips For Recified Tile
The document provides tips and information for installing rectified tile, including:
1) Rectified tile undergoes an additional manufacturing process where the tile is cut or ground to very tight tolerances, assuring limited size variation.
2) Recent revisions to tile installation standards now include a category for rectified tile and provide more realistic expectations for products and installations.
3) When installing rectified or large format tile, use appropriate substrate preparation, thinset, grout joints, and movement joints to accommodate natural variations in tile size and substrate flatness.
Lean-toToolShed.pdf
Includes: Step-By-Step Instructions, Complete Details & Materials Listshttps://sites.google.com/view/make-money-with-your-woodworki/home
Lean-toToolShed.pdf
https://sites.google.com/view/make-money-with-your-woodworki/home
Lean-to Tool Shed
Includes: Step-By-Step Instructions, Complete Details & Materials Lists
Lean-toToolShed.pdf
Includes: Step-By-Step Instructions, Complete Details & Materials Lists
https://sites.google.com/view/make-money-with-your-woodworki/home
floor_plan.pdf
The document provides information on symbols and conventions used in residential floor plans, including:
- Walls are drawn thicker than actual size to include drywall. Interior walls are 4 1/2" or 6 1/2" thick for 2x4 or 2x6 studs.
- Guardrails must be at least 36" high with no more than 4" between intermediate rails.
- Doors are typically 6'8" high. Interior doors swing into rooms and exterior doors have thresholds.
- Windows include double hung, casement, awning, jalousie and hopper types.
- Door and window schedules provide manufacturer details.
- Dimensioning starts with walls
How to build a retaining wall
The document provides instructions for building a low garden retaining wall along an existing fence to transform a dull yard. It details materials needed like treated wood posts and boards. Instructions include laying out the perimeter, digging post holes, setting posts in concrete, fixing retaining boards and capping, bracing the fence posts, and installing drainage before backfilling. Building the retaining wall can create an exciting new garden space.
TTG installation
This document provides instructions for installing artificial grass in 6 steps:
1. Prepare the ground by leveling and compacting the surface.
2. Lay the artificial grass and let it settle for a few hours to prevent wrinkles.
3. Cut and trim the grass edges and lay seeming tapes along the edges.
4. Apply glue to the seeming tapes and joints and let dry before pressing together.
5. Optionally, infill the grass with fine sand for outdoor installations.
6. Fix the edges with nails or seeming tape and enjoy the new artificial grass.
Fixing linings
This document discusses different methods for fixing wall linings, including:
- Using different fixing methods depending on the type of lining, such as screws or nails.
- Preparing surfaces by checking frames for straightness and plumbness before installing linings.
- Using battens to provide a surface to fix linings if the wall framing is unsuitable or for masonry walls.
- Installing timber lining boards by measuring wall dimensions to determine layout, installing boards straight, and secret nailing to hide fixings.
Similar to RFP Bracket Installation (20)
Scottish home improvement denver application instructions
Scottish home improvement denver application instructions
How to Install Allure GripStrip Flooring - Official Installation Instructions...
How to Install Allure GripStrip Flooring - Official Installation Instructions...
Recently uploaded
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto RicoCorey Perlman, Social Media Speaker and Consultant
Social media for business The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSDpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta Structural Design Process: Step-by-Step Guide for Buildings
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Company Valuation webinar series - Tuesday, 4 June 2024
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentationsBest Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
How to Implement a Real Estate CRM Software
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Recently uploaded (20)
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
Authentically Social by Corey Perlman - EO Puerto Rico
Authentically Social by Corey Perlman - EO Puerto Rico
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Structural Design Process: Step-by-Step Guide for Buildings
Structural Design Process: Step-by-Step Guide for Buildings
Company Valuation webinar series - Tuesday, 4 June 2024
Company Valuation webinar series - Tuesday, 4 June 2024
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
RFP Bracket Installation
- 1. E317 RFP RECESSED FLOOR PANEL BRACKET KIT • Use the E317 Kit to support subfloor sections between and flush to the top of engineered wood floor joists. • Anideal solution for installing the INNI drain is with a pre-fabricated single slope floor panel.
- 2. THE KIT INCLUDES : 10 4 30 10 20 20 QTY
- 3. HOW TO : USE THE E317 RFP BRACKET KIT
- 4. FIRST– Remove the subfloor from the area being lowered. SECOND – Pre-drill holes aroundedges.
- 17. Make bottom surfaces flat, smooth, and dust free. Remove or cut off any nails, staples or screws that extend below subfloor within 3” of opening.
- 22. If your job has a narrow edge gap, consider these options : If G is… Less than ½” leave as is. Between ½” & 1 ½” use a fill piece thinner than standard ¾” subfloor as available. No adhesive needed for this small fill. Wider than 1 ½” but less than 4” use a standard subfloor panel. Underlap adhesive bond but no brackets. 4” and wider use a standard subfloor material “Underlap Bond” floor and use brackets.
- 25. In the following example, G is more than 1 ½” but less than 4”.
- 47. Use staples, screws or nails to secure the plate to the joist web.
- 52. Layout and mark bracket positions.
- 83. Cut a gage block fromsubfloor material.
- 87. Brackets are attached to joists, back to back, as shown next.
- 94. 2 Temporary HIP (hold in place) screws are used to hold the first bracket in position.
- 101. 6 BTB (bracket to bracket) Screws are used to sandwich bracket pairs with the joist webbetween.
- 115. Cut panels 1/8” narrower than the space between joists. • UNDERLAP EDGES MINIMUMOF 3”
- 149. Install ¼” thick tile backer board.
- 153. Floor lowering is complete. • Ready for installation of drain and tile-able surface.
- 164. FOLLOW US ON SOCIAL MEDIA! http://www.facebook.com/ebbeamerica http://www.Instagram.com/ebbeamerica Subscribe to our YouTube channel for more videos. For more information please contact us at 801-820-7200 ebbe-america.com