Shrikant Pandey has over 5 years of experience as a Mechanical Engineer at Reliance Industries in India. He holds a Bachelor's degree in Mechanical Engineering from the Indian Institute of Technology Guwahati. Currently, he works as a Manager at Reliance's refinery in Jamnagar, where his responsibilities include maintenance, safety, and process improvements. Prior to this role, he completed a graduate training program at Reliance, which included assignments at various sites to gain experience in different areas of the oil and petrochemical sectors.
To provide auto belt tensioner unit to existing bucket elevator for handling of grains in rice mill, which should be reliable, safe and of less maintenance cost.
To provide auto belt tensioner unit to existing bucket elevator for handling of grains in rice mill, which should be reliable, safe and of less maintenance cost.
Experienced Process Design Engineer with a demonstrated history of working in the mechanical or industrial engineering industry. Strong engineering professional skilled in design, Contracts & tendering, Bid management, negotiations,Operations Management, Process Engineering, Power Plants, and Engineering.
My name is Pravin Patil and I am actively seeking for job opportunity in Mechanical and Automotive Industry.
I did my M. Tech in Mechanical Heat Power Engineering and B. E. In Automobile Engineering.
I have knowledge of ANSYS, SolidWorks, CATIA, AutoCAD.
Experienced Process Design Engineer with a demonstrated history of working in the mechanical or industrial engineering industry. Strong engineering professional skilled in design, Contracts & tendering, Bid management, negotiations,Operations Management, Process Engineering, Power Plants, and Engineering.
My name is Pravin Patil and I am actively seeking for job opportunity in Mechanical and Automotive Industry.
I did my M. Tech in Mechanical Heat Power Engineering and B. E. In Automobile Engineering.
I have knowledge of ANSYS, SolidWorks, CATIA, AutoCAD.
BE mechanical engineer with 9.7 years experience in productionJaga deesh
BE mechanical engineer with 9.7 years exp in production department ,good experience in planning,5s,kaizen,fmea,7 qc tools & story,lean manufacturing ,smed,spc techniques
"Sir,
I am offering my services for the job as an Engineer in your esteemed Organization.I expect that I will be considered favorably.I have completed my bachelor of Mechanical/industrial engineering and management.
having four years and six month professional experience at water and power division pak p.w.d gilgit Pakistan and hino pak motors Karachi pvt limited Pakistan.
Enclosed is my resume for your review. I look forward to hearing from you to discuss my qualification and as well as personal skills in more detail.
Sincerely,
Muhammad umar"
1. Shrikant Pandey
Sector 18, 1-E, Reliance Greens, Motikhavdi, Jamnagar, Gujarat, India, Pin-361142
Mobile – 7043076797, Email – shrikant.ril.iitg@gmail.com
Mechanical Engineer
A graduate from prestigious Indian Institute of Technology, IIT-Guwahati, recruited in final year by
Reliance Industries – an Indian company ranked 114 in fortune 500, for its extensive 1 year training
within the Oil & Petrochemical sector. After successful completion of training at two of RIL’s sites – a
petrochemical unit at Vadodara & world’s largest refinery at Jamnagar, I am now a Manager in Crude
plant of Reliance's very first refinery DTA. At present, I am looking for opportunities to enhance my
knowledge & experience gaining at RIL and build a sound career as a Mechanical engineer.
Professional Experience
Manager
Jamnagar: JMD DTA – CRUDE 1/2, July 2015 – Present
Highlights:
- My suggestion for the 'reduction of energy losses from casing of hot pumps by providing a
insulation' upon it was accepted a Category 'A' suggestion. The suggestion was based on
extensive calculations done on the basis of working fluid dynamical properties
- Shutdown: Worked in 30 days (March/April 2016) shutdown in VGOHT unit, solely in charge of
HXs maintenance (37 Nos.) including IBR HXs. Successfully planned and executed
maintenance of a combination of A/B/D, E/F/K, S/T/U HXs as per TEMA classification including
IBR hydrotests of high pressure Reboilers
Job responsibilities as follows:
- Safe, efficient & effective maintenance and reliability of a chemical plant as per legal
standards with excellence in Health, Safety & Environmental norms
- Develop relationships with contractors, suppliers and service companies and monitor
contractor's performance to ensure they abide by all of plants standards and are safe,
competent and competitive providers
- Recommend necessary changes to plant processes, equipment, procedures to meet
operational objectives
- Work with site’s Central Engineering & Technical services to insure best practices for
equipment repairs & overhaulings, preventative/predictive maintenance strategies for rotary
equipments pumps, compressors, turbines & fin fans and static equipments exchangers,
vessels & columns
- Handle system work including equipment records, maintenance histories, work orders &
notifications, work permit management along with Inventory modeling & control and
contractor’s measurement sheets
- Routine activities also include Look, listen, feel (LLF) rounds and daily maintenance planning &
material management
- Awareness of codes & standards: TEMA for heat exchangers, API-610 for centrifugal pumps
and API 682 for mechanical seals
Graduate Engineer Trainee
Vadodara: VMD – IOP/GTPP, July 2014 – February 2015
Highlights:
- Looked after day to day maintenance activities on field along with work permit management
at 4 units of IOP – Air compressors, Boilers, DM water & Refrigeration system and 2 units of
GTPP – Gas turbines & Heat recovery steam generators (HRSG)
- Shutdown: Worked in 7 days (October 2014) shutdown at GTPP studying Combustion
Inspection of Gas Turbine mainly as a learning engineer
Learnings: Scheduled Inspections – MI, CI & HGPI of Gas Turbines, IBR of boilers
2. Jamnagar: JMD DTA – CRUDE 1/2, March 2015 – June 2015
Highlights:
- Shutdown: Worked in 30 days (March/April 2015) shutdown, this time responsible for
planning & execution of Piping MOCs. The responsibilities handled:
1. Review project specifications, P&ID drawings and isometric sketches with field visitations
2. Accordingly plan for work scheduling and priorities
3. Remain in regular contact with fabrication for the job progress. Accordingly arrange for
all tools, tackles & manpower required for safe execution of the job
4. Arrange for welding tests & heat treatments from Central inspection group wherever
required
Learnings: a. Read P&IDs and isometrics, W/C/G requirements and procedures, NDTs for welding
b. Overall jobs & responsibilities of a maintenance engineer
Internships
1. Internship at Hero MotoCorp Limited, Dharuhera plant, Haryana – 8 weeks (Summer 2013)
- Topic: Opportunities for automation in packaging processes in exports
- Mentor: Shailendra Shriwatri, GM, Dept. of production engineering, HMCD
Highlights:
- Understand the CKD packaging process & suggest ways of process automation wherever
possible
- Design an outline of the layout for SKD packaging process to be performed on a daily basis
2. Vocational training at Prism Cement Limited, Satna, M.P – 4 weeks (Summer 2012)
- Topic: Cement Manufacturing
- Mentor: P.K. Biswas, Joint GM, Mechanical dept., Unit-I, PCL
Highlights:
- Study the work of different sections of a cement manufacturing industry — Crusher, raw mill,
cement mill, coal mill, clinker in whole cement manufacturing process
Education B.Tech. Major: Mechanical Engineering Minor: Electronics & Communication Engineering
B. Tech. IIT Guwahati 2010 - 2014 8.34/10
XII CBSE 2009 - 2010 92.2%
X CBSE 2007 - 2008 95.4%
Skills & Proficiencies
- SAP
- CNC Programming, MATLAB, AutoCAD, Pro-E, Solid Edge
- MS Office, MS Project
B.Tech. Projects
1. Bachelor Thesis – 1 year (2013-2014)
- Topic: Dynamic balancing of rotor – bearing systems via FEM packages
- Mentor: Prof. Rajiv Tiwari, Department of Mechanical Engineering, IITG
Highlights:
- In rotor – bearing systems running above critical speeds impossible to balance by
addition/subtraction of masses, design an actuator which can balance the rotor to such an
extent that it gets either balanced or can be balanced by small masses
3. 2. Mechanical Measurement Project – 4 months (2013)
- Topic: Force measurement for six degrees of freedom systems in low speed applications
- Mentor: Prof. Vinayak Kulkarni, Department of Mechanical Engineering, IITG
3. Minor Course Project – 4 months (2013)
- Topic: RANSAC Algorithm
- Mentor: Prof. Prithvijit Guha, Department of ECE, IITG
Highlights:
- Code in MATLAB to implement RANSAC algorithm for curve fitting without using the in-built
function for the same
4. Machine Design Project – 4 months (2013)
- Topic: Built-in vacuum cleaner for cars
- Mentor: Prof. S.K. Kakoty, Department of Mechanical Engineering, IITG
Highlights:
- Design a built-in vacuum cleaner specifically for cleaning in automobiles using Pro-Engineer
software
5. CAD Simulation Project – 4 months (2012)
- Topic: Plagiograph Mechanism
- Mentor: Prof. Atanu Banerjee, Department of Mechanical Engineering, IITG
Highlights:
- Design and animate Plagiograph Mechanism in Pro-E, followed by its kinetic analysis and
simulation
Position of Responsibility
1. Secretary of External Relations – MESA (Mechanical Engineering Student’s Association)
(2012-13)
Highlights:
- Collected information of the alumni of Mechanical Department – B.Tech. & M.Tech. from 1999-
2012 to form a database
- Co-ordinated relation with the alumni using social networking sites and professional sites
- Collected articles from alumni for department annual magazines Mechanika & Sync and the
Alumni Newsletter of institute
- Organized Alumni talks and lectures
2. Organizing Team, TECHNICHE (2012)
Highlights:
- Organized ‘CODEWARS’, a coding event as a part of Rush Hour module and managed over 20
participating teams/colleges
3. Member of Activities Club, MESA IITG (2011-2012)
Highlights:
- Organized departmental sporting events, quizzes, lectures, internship & placement talks,
workshops
4. A NCC cadet (2010-13)