Sathish P is a [FEA Engineer] with [1 year] of experience in the [TRANSPORTATION] industry. He has experience using [HYPERMESH & ANSYS Tools] to analyze mechanical components of locomotives. Some of the projects he worked on include analyzing the cover plate and VVT-layshaft of locomotives for structural stresses, as well as performing structural and fatigue analysis of traction motors, test rigs, and rocker arms.

1. SATHISH P
2/7,k.k.gounder st, saibabatemple(opp), kottur malayandi pattinam,pollachi(T.K.),Coimbatore, tamilnadu-642114
H: +91 90035 08363 | C: +91 90035 08363 | satpalani2811@gmail.com
Summary
Skilled [FEA Engineer] with experience [1 year] in the [TRANSPORTATION] industry.
Familiar with [HYPERMESH & ANSYS Tools].
Experience
FEA Engineer NOV2012 –OCT2013
GE INDIA TECHNOLOGY CENTER-Bangalore, Karnataka
Analyzing the mechanical components of locomotives (engine section) by using
HYPERMESH & ANSYS tools.
PROFFESSIONALEXPERIENCE ON VARIOUSPROJECTS WORKED:
1. COVER PLATE (STRUCTURAL ANAYSIS)
•CoverPlate isusedto coverthe lubricatingoil pipe assembly,where tostopthe movement of
lubricatingoil valve mechanismwithsome pressure.
•Analyzingcoverplate byapplyingpressure asthe designengineersuggested,whethertocheck
the stressesproducedonthe coverplate islessthanthe yield.
2. VVT-LAYSHAFT(STRUCTURAL ANALYSIS)
•Pushrodisthe connectorbetweenthe camshaftandthe rocker arm for the openingand
closingof the valves.Toincrease/delaythe openingtimeof valve isdeterminedbythe VVT-
LAYSHAFTrotation.
•As perthe discussionwiththe designengineerthe physical statuswill change toFEA for
boundaryconditionsandanalyze tocheckandcompare VON-MISESstresswiththe yield.
3. TRACTION MOTOR (STRUCTURAL & FATIGUEANALYSIS)
•Traction motoris a type of electricmotor,whichisusedtopowerthe locomotive wheel
mountedonaxle.Powerproducedbymotoristransferredthroughpiniononthe motorshaftto
the bull gearon the axle.
•As designengineersuggestedchange the physical status of componenttoFEA withboundary
conditions.
•Run all the static & fatigue loadcases,getthe stressdirectionforfixingthe straingauges.

2. 4. TEST RIG (STRUCTURAL & FATIGUEANALYSIS)
I. EXHAUST MANIFOLDTEST RIG
II. SUSPENSION SPRINGSYSTEM
•Investigate the rigstructure withthe loadcasesgivenbythe designengineer toconfirmthat
the rig can withstandforthe real time loads applied&alsoneedtocheckthe factorof safety.
5. ROCKER ARM (STRUCTURAL & FATIGUEANALYSIS)
•Valve trainopeningandclosingopening/closinganddurationgeometryof the valve train
controlsthe amountof air fuel enteringthe combustionchamberatany given pointof time.The
timingforopening/closingdurationiscontrolledbythe camshaft;itissynchronizedtothe
crankshaftby chain,beltorgear.
•In real time,the rockerarm is fixedin the center,the force transmittedfromcamshaftthrough
pushrodand the otherendforce comingfromspringon the valve.
Accomplishments
 Underwent In plant-training in NEYVELI LIGNITE CORPORATION in NEYVELI.
 Undergone industrial visit on INTEGRAL COACH FACTORY, PERAMBUR-CHENNAI
 Undergone industrial visit on COCA-COLA COMPANY, NEMAM-CHENNAI
PROJECT:
1. Completed Mini Project on the topic “MANUAL PUSH CLEANER” in 2011.
“This is the most economical cleaning not in need of electric power. It
requires manual power to use it. Only 20 newton force is needed to work”
2. Completed final year project on “REGENERATIVE SUSPENSION SYSTEM” in
2012.
“Under the idea of vibration in shock absorber with dc stepper motor.we are
using the mechanical energy to produce power as a source of shockabsorberwith
DC STEPPER MOTOR as generator”
Academic Background
B.E, Mechanical Engineering JUNE 2012
Loyola Institute of Technology, ANNA UNIVERSITY-Chennai, TAMILNADU, INDIA
7.5 CGPA
HIGHER SECONDARY, STATE BOARD MAY 2008
P.K.D.Matriculation Higher Sec School-Pollachi, Coimbatore,Tamilnadu, INDIA
78%
S.S.L.C, STATE BOARD MAY 2006
Govt.Boys.Hr.Sec.School- Kottur, Coimbatore, Tamilnadu, INDIA
86%

3. Software Skills
Certified Course:
 PRO-E (Wildfire-5.0)
 SOLIDWORKS 10.0
 ANSYS 10.0 ( Working experience up to 12.0)
Other Technical Software’s Known:
 HYPERMESH 11.0
 FEMFAT 5.0
Affliations
 Cadet in the NATIONAL CADET CORPS of certificate “A” (batch 2004-2005).
 Active Member of the Association of Radiant Mechanical Students.
Personal Information
 Place of birth: COIMBATORE,TAMILNADU
 Date Of Birth: 28th
of NOVEMBER, 1990
 Present Resident in Coimbatore,Tamilnadu
 Sex: Male
 Status: Single
 Hobbies: playing cricket, badminton, carom, watching TV
 Languages: ENGLISH & TAMIl
Declarations
I hereby assure you that the information furnished above is true to the best of
my knowledge.
Date:
Place: COIMBATORE (SATHISH P)